From: catalin.marinas@arm.com (Catalin Marinas)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v8 06/16] ARM: LPAE: add ISBs around MMU enabling code
Date: Mon, 7 Nov 2011 16:16:48 +0000 [thread overview]
Message-ID: <1320682618-1182-7-git-send-email-catalin.marinas@arm.com> (raw)
In-Reply-To: <1320682618-1182-1-git-send-email-catalin.marinas@arm.com>
From: Will Deacon <will.deacon@arm.com>
Before we enable the MMU, we must ensure that the TTBR registers contain
sane values. After the MMU has been enabled, we jump to the *virtual*
address of the following function, so we also need to ensure that the
SCTLR write has taken effect.
This patch adds ISB instructions around the SCTLR write to ensure the
visibility of the above.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
arch/arm/boot/compressed/head.S | 1 +
arch/arm/include/asm/assembler.h | 11 +++++++++++
arch/arm/kernel/head.S | 2 ++
arch/arm/kernel/sleep.S | 2 ++
4 files changed, 16 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index c2effc9..c5d6025 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -659,6 +659,7 @@ __armv7_mmu_cache_on:
mcrne p15, 0, r3, c2, c0, 0 @ load page table pointer
mcrne p15, 0, r1, c3, c0, 0 @ load domain access control
#endif
+ mcr p15, 0, r0, c7, c5, 4 @ ISB
mcr p15, 0, r0, c1, c0, 0 @ load control register
mrc p15, 0, r0, c1, c0, 0 @ and read it back
mov r0, #0
diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h
index 29035e8..b6e65de 100644
--- a/arch/arm/include/asm/assembler.h
+++ b/arch/arm/include/asm/assembler.h
@@ -187,6 +187,17 @@
#endif
/*
+ * Instruction barrier
+ */
+ .macro instr_sync
+#if __LINUX_ARM_ARCH__ >= 7
+ isb
+#elif __LINUX_ARM_ARCH__ == 6
+ mcr p15, 0, r0, c7, c5, 4
+#endif
+ .endm
+
+/*
* SMP data memory barrier
*/
.macro smp_dmb mode
diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
index 566c54c..6ee994c 100644
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -400,8 +400,10 @@ ENDPROC(__enable_mmu)
.align 5
__turn_mmu_on:
mov r0, r0
+ instr_sync
mcr p15, 0, r0, c1, c0, 0 @ write control reg
mrc p15, 0, r3, c0, c0, 0 @ read id reg
+ instr_sync
mov r3, r3
mov r3, r13
mov pc, r3
diff --git a/arch/arm/kernel/sleep.S b/arch/arm/kernel/sleep.S
index 020e99c..4ac45fe 100644
--- a/arch/arm/kernel/sleep.S
+++ b/arch/arm/kernel/sleep.S
@@ -56,8 +56,10 @@ ENDPROC(cpu_suspend_abort)
.align 5
ENTRY(cpu_resume_mmu)
ldr r3, =cpu_resume_after_mmu
+ instr_sync
mcr p15, 0, r0, c1, c0, 0 @ turn on MMU, I-cache, etc
mrc p15, 0, r0, c0, c0, 0 @ read id reg
+ instr_sync
mov r0, r0
mov r0, r0
mov pc, r3 @ jump to virtual address
next prev parent reply other threads:[~2011-11-07 16:16 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-11-07 16:16 [PATCH v8 00/16] ARM: Add support for the Large Physical Address Extensions Catalin Marinas
2011-11-07 16:16 ` [PATCH v8 01/16] ARM: pgtable: switch to use pgtable-nopud.h Catalin Marinas
2011-11-07 16:16 ` [PATCH v8 02/16] ARM: pgtable: Fix compiler warning in ioremap.c introduced by nopud Catalin Marinas
2011-11-10 22:42 ` Russell King - ARM Linux
2011-11-07 16:16 ` [PATCH v8 03/16] ARM: LPAE: Move page table maintenance macros to pgtable-2level.h Catalin Marinas
2011-11-07 16:16 ` [PATCH v8 04/16] ARM: LPAE: Move the FSR definitions to separate files Catalin Marinas
2011-11-10 22:45 ` Russell King - ARM Linux
2011-11-10 23:44 ` Tony Lindgren
2011-11-07 16:16 ` [PATCH v8 05/16] ARM: LPAE: Factor out classic-MMU specific code into proc-v7-2level.S Catalin Marinas
2011-11-07 16:16 ` Catalin Marinas [this message]
2011-11-07 16:16 ` [PATCH v8 07/16] ARM: LPAE: Introduce the 3-level page table format definitions Catalin Marinas
2011-11-10 21:53 ` Nicolas Pitre
2011-11-11 10:49 ` Catalin Marinas
2011-11-07 16:16 ` [PATCH v8 08/16] ARM: LPAE: Page table maintenance for the 3-level format Catalin Marinas
2011-11-10 21:59 ` Nicolas Pitre
2011-11-11 10:54 ` Catalin Marinas
2011-11-07 16:16 ` [PATCH v8 09/16] ARM: LPAE: MMU setup for the 3-level page table format Catalin Marinas
2011-11-10 22:24 ` Nicolas Pitre
2011-11-10 22:38 ` Russell King - ARM Linux
2011-11-11 11:17 ` Catalin Marinas
2011-11-11 11:00 ` Catalin Marinas
2011-11-07 16:16 ` [PATCH v8 10/16] ARM: LPAE: Invalidate the TLB before freeing the PMD Catalin Marinas
2011-11-07 16:16 ` [PATCH v8 11/16] ARM: LPAE: Add fault handling support Catalin Marinas
2011-11-10 22:46 ` Russell King - ARM Linux
2011-11-07 16:16 ` [PATCH v8 12/16] ARM: LPAE: Add context switching support Catalin Marinas
2011-11-07 16:16 ` [PATCH v8 13/16] ARM: LPAE: Add identity mapping support for the 3-level page table format Catalin Marinas
2011-11-10 22:55 ` Russell King - ARM Linux
2011-11-11 11:36 ` Catalin Marinas
2011-11-11 11:58 ` Will Deacon
2011-11-07 16:16 ` [PATCH v8 14/16] ARM: LPAE: mark memory banks with start > ULONG_MAX as highmem Catalin Marinas
2011-11-09 20:41 ` Nicolas Pitre
2011-11-07 16:16 ` [PATCH v8 15/16] ARM: LPAE: add support for ATAG_MEM64 Catalin Marinas
2011-11-08 16:54 ` Stephen Boyd
2011-11-08 16:59 ` Catalin Marinas
2011-11-08 23:38 ` Nicolas Pitre
2011-11-09 0:24 ` Will Deacon
2011-11-09 10:44 ` Catalin Marinas
2011-11-07 16:16 ` [PATCH v8 16/16] ARM: LPAE: Add the Kconfig entries Catalin Marinas
2011-11-10 22:57 ` Russell King - ARM Linux
2011-11-11 11:46 ` Catalin Marinas
2011-11-11 13:24 ` Russell King - ARM Linux
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1320682618-1182-7-git-send-email-catalin.marinas@arm.com \
--to=catalin.marinas@arm.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).