* [PATCH 1/3] ARM i.MX5: remove unnecessary includes from board files
2011-11-16 7:41 [PATCH v2] merge i.MX5 into mach-imx Sascha Hauer
@ 2011-11-16 7:41 ` Sascha Hauer
2011-11-16 7:41 ` [PATCH 2/3] ARM i.MX: Merge i.MX5 support into mach-imx Sascha Hauer
2011-11-16 7:41 ` [PATCH 3/3] ARM i.MX: Update defconfig Sascha Hauer
2 siblings, 0 replies; 4+ messages in thread
From: Sascha Hauer @ 2011-11-16 7:41 UTC (permalink / raw)
To: linux-arm-kernel
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/mach-mx5/board-mx53_ard.c | 1 -
arch/arm/mach-mx5/board-mx53_evk.c | 1 -
arch/arm/mach-mx5/board-mx53_loco.c | 1 -
arch/arm/mach-mx5/board-mx53_smd.c | 1 -
4 files changed, 0 insertions(+), 4 deletions(-)
diff --git a/arch/arm/mach-mx5/board-mx53_ard.c b/arch/arm/mach-mx5/board-mx53_ard.c
index 0d7f0ff..b88a2bc 100644
--- a/arch/arm/mach-mx5/board-mx53_ard.c
+++ b/arch/arm/mach-mx5/board-mx53_ard.c
@@ -32,7 +32,6 @@
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
-#include "crm_regs.h"
#include "devices-imx53.h"
#define ARD_ETHERNET_INT_B IMX_GPIO_NR(2, 31)
diff --git a/arch/arm/mach-mx5/board-mx53_evk.c b/arch/arm/mach-mx5/board-mx53_evk.c
index 6bea31a..c69413d 100644
--- a/arch/arm/mach-mx5/board-mx53_evk.c
+++ b/arch/arm/mach-mx5/board-mx53_evk.c
@@ -37,7 +37,6 @@
#define EVK_ECSPI1_CS1 IMX_GPIO_NR(3, 19)
#define MX53EVK_LED IMX_GPIO_NR(7, 7)
-#include "crm_regs.h"
#include "devices-imx53.h"
static iomux_v3_cfg_t mx53_evk_pads[] = {
diff --git a/arch/arm/mach-mx5/board-mx53_loco.c b/arch/arm/mach-mx5/board-mx53_loco.c
index 7678f77..e64a8f7 100644
--- a/arch/arm/mach-mx5/board-mx53_loco.c
+++ b/arch/arm/mach-mx5/board-mx53_loco.c
@@ -32,7 +32,6 @@
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
-#include "crm_regs.h"
#include "devices-imx53.h"
#define MX53_LOCO_POWER IMX_GPIO_NR(1, 8)
diff --git a/arch/arm/mach-mx5/board-mx53_smd.c b/arch/arm/mach-mx5/board-mx53_smd.c
index 59c0845..d498573 100644
--- a/arch/arm/mach-mx5/board-mx53_smd.c
+++ b/arch/arm/mach-mx5/board-mx53_smd.c
@@ -31,7 +31,6 @@
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
-#include "crm_regs.h"
#include "devices-imx53.h"
#define SMD_FEC_PHY_RST IMX_GPIO_NR(7, 6)
--
1.7.7.1
^ permalink raw reply related [flat|nested] 4+ messages in thread* [PATCH 2/3] ARM i.MX: Merge i.MX5 support into mach-imx
2011-11-16 7:41 [PATCH v2] merge i.MX5 into mach-imx Sascha Hauer
2011-11-16 7:41 ` [PATCH 1/3] ARM i.MX5: remove unnecessary includes from board files Sascha Hauer
@ 2011-11-16 7:41 ` Sascha Hauer
2011-11-16 7:41 ` [PATCH 3/3] ARM i.MX: Update defconfig Sascha Hauer
2 siblings, 0 replies; 4+ messages in thread
From: Sascha Hauer @ 2011-11-16 7:41 UTC (permalink / raw)
To: linux-arm-kernel
This patch moves the contents of arch/arm/mach-mx5 to arch/arm/mach-imx
and adjusts the Makefile/Kconfig entries in a way that it's possible
to compile i.MX5 together with i.MX3/6.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Tested-by: Shawn Guo <shawn.guo@linaro.org>
Tested-by: Dirk Behme <dirk.behme@de.bosch.com>
---
arch/arm/Makefile | 1 -
arch/arm/mach-imx/Kconfig | 239 +++++++++++++++++++
arch/arm/mach-imx/Makefile | 21 ++
arch/arm/mach-imx/Makefile.boot | 12 +
arch/arm/{mach-mx5 => mach-imx}/clock-mx51-mx53.c | 2 +-
arch/arm/{mach-mx5/cpu.c => mach-imx/cpu-imx5.c} | 0
arch/arm/{mach-mx5 => mach-imx}/cpu_op-mx51.c | 0
arch/arm/{mach-mx5 => mach-imx}/cpu_op-mx51.h | 0
.../crm_regs.h => mach-imx/crm-regs-imx5.h} | 0
arch/arm/{mach-mx5 => mach-imx}/devices-imx50.h | 0
arch/arm/{mach-mx5 => mach-imx}/devices-imx51.h | 0
arch/arm/{mach-mx5 => mach-imx}/devices-imx53.h | 0
arch/arm/{mach-mx5 => mach-imx}/efika.h | 0
arch/arm/{mach-mx5/ehci.c => mach-imx/ehci-imx5.c} | 0
.../eukrea_mbimx51-baseboard.c | 0
.../eukrea_mbimxsd-baseboard.c | 0
arch/arm/{mach-mx5 => mach-imx}/imx51-dt.c | 0
arch/arm/{mach-mx5 => mach-imx}/imx53-dt.c | 0
.../board-cpuimx51.c => mach-imx/mach-cpuimx51.c} | 0
.../mach-cpuimx51sd.c} | 0
.../board-mx50_rdp.c => mach-imx/mach-mx50_rdp.c} | 0
.../board-mx51_3ds.c => mach-imx/mach-mx51_3ds.c} | 0
.../mach-mx51_babbage.c} | 0
.../mach-mx51_efikamx.c} | 0
.../mach-mx51_efikasb.c} | 0
.../board-mx53_ard.c => mach-imx/mach-mx53_ard.c} | 0
.../board-mx53_evk.c => mach-imx/mach-mx53_evk.c} | 0
.../mach-mx53_loco.c} | 0
.../board-mx53_smd.c => mach-imx/mach-mx53_smd.c} | 0
arch/arm/{mach-mx5/mm.c => mach-imx/mm-imx5.c} | 0
arch/arm/{mach-mx5 => mach-imx}/mx51_efika.c | 0
arch/arm/{mach-mx5/system.c => mach-imx/pm-imx5.c} | 89 +++++++-
arch/arm/mach-mx5/Kconfig | 244 --------------------
arch/arm/mach-mx5/Makefile | 26 --
arch/arm/mach-mx5/Makefile.boot | 9 -
arch/arm/mach-mx5/pm-imx5.c | 83 -------
arch/arm/plat-mxc/Kconfig | 15 +-
37 files changed, 356 insertions(+), 385 deletions(-)
rename arch/arm/{mach-mx5 => mach-imx}/clock-mx51-mx53.c (99%)
rename arch/arm/{mach-mx5/cpu.c => mach-imx/cpu-imx5.c} (100%)
rename arch/arm/{mach-mx5 => mach-imx}/cpu_op-mx51.c (100%)
rename arch/arm/{mach-mx5 => mach-imx}/cpu_op-mx51.h (100%)
rename arch/arm/{mach-mx5/crm_regs.h => mach-imx/crm-regs-imx5.h} (100%)
rename arch/arm/{mach-mx5 => mach-imx}/devices-imx50.h (100%)
rename arch/arm/{mach-mx5 => mach-imx}/devices-imx51.h (100%)
rename arch/arm/{mach-mx5 => mach-imx}/devices-imx53.h (100%)
rename arch/arm/{mach-mx5 => mach-imx}/efika.h (100%)
rename arch/arm/{mach-mx5/ehci.c => mach-imx/ehci-imx5.c} (100%)
rename arch/arm/{mach-mx5 => mach-imx}/eukrea_mbimx51-baseboard.c (100%)
rename arch/arm/{mach-mx5 => mach-imx}/eukrea_mbimxsd-baseboard.c (100%)
rename arch/arm/{mach-mx5 => mach-imx}/imx51-dt.c (100%)
rename arch/arm/{mach-mx5 => mach-imx}/imx53-dt.c (100%)
rename arch/arm/{mach-mx5/board-cpuimx51.c => mach-imx/mach-cpuimx51.c} (100%)
rename arch/arm/{mach-mx5/board-cpuimx51sd.c => mach-imx/mach-cpuimx51sd.c} (100%)
rename arch/arm/{mach-mx5/board-mx50_rdp.c => mach-imx/mach-mx50_rdp.c} (100%)
rename arch/arm/{mach-mx5/board-mx51_3ds.c => mach-imx/mach-mx51_3ds.c} (100%)
rename arch/arm/{mach-mx5/board-mx51_babbage.c => mach-imx/mach-mx51_babbage.c} (100%)
rename arch/arm/{mach-mx5/board-mx51_efikamx.c => mach-imx/mach-mx51_efikamx.c} (100%)
rename arch/arm/{mach-mx5/board-mx51_efikasb.c => mach-imx/mach-mx51_efikasb.c} (100%)
rename arch/arm/{mach-mx5/board-mx53_ard.c => mach-imx/mach-mx53_ard.c} (100%)
rename arch/arm/{mach-mx5/board-mx53_evk.c => mach-imx/mach-mx53_evk.c} (100%)
rename arch/arm/{mach-mx5/board-mx53_loco.c => mach-imx/mach-mx53_loco.c} (100%)
rename arch/arm/{mach-mx5/board-mx53_smd.c => mach-imx/mach-mx53_smd.c} (100%)
rename arch/arm/{mach-mx5/mm.c => mach-imx/mm-imx5.c} (100%)
rename arch/arm/{mach-mx5 => mach-imx}/mx51_efika.c (100%)
rename arch/arm/{mach-mx5/system.c => mach-imx/pm-imx5.c} (58%)
delete mode 100644 arch/arm/mach-mx5/Kconfig
delete mode 100644 arch/arm/mach-mx5/Makefile
delete mode 100644 arch/arm/mach-mx5/Makefile.boot
delete mode 100644 arch/arm/mach-mx5/pm-imx5.c
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index dfcf3b0..cf7d467 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -160,7 +160,6 @@ machine-$(CONFIG_ARCH_MSM) := msm
machine-$(CONFIG_ARCH_MV78XX0) := mv78xx0
machine-$(CONFIG_ARCH_IMX_V4_V5) := imx
machine-$(CONFIG_ARCH_IMX_V6_V7) := imx
-machine-$(CONFIG_ARCH_MX5) := mx5
machine-$(CONFIG_ARCH_MXS) := mxs
machine-$(CONFIG_ARCH_NETX) := netx
machine-$(CONFIG_ARCH_NOMADIK) := nomadik
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 5f7f9c2..ef6a6b8 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -33,6 +33,18 @@ config ARCH_MX31
config ARCH_MX35
bool
+config ARCH_MX5
+ bool
+
+config ARCH_MX50
+ bool
+
+config ARCH_MX51
+ bool
+
+config ARCH_MX53
+ bool
+
config SOC_IMX1
bool
select ARCH_MX1
@@ -86,6 +98,32 @@ config SOC_IMX35
select MXC_AVIC
select SMP_ON_UP if SMP
+config SOC_IMX5
+ select CPU_V7
+ select ARM_L1_CACHE_SHIFT_6
+ select MXC_TZIC
+ select ARCH_MXC_IOMUX_V3
+ select ARCH_MXC_AUDMUX_V2
+ select ARCH_HAS_CPUFREQ
+ select ARCH_MX5
+ bool
+
+config SOC_IMX50
+ bool
+ select SOC_IMX5
+ select ARCH_MX50
+
+config SOC_IMX51
+ bool
+ select SOC_IMX5
+ select ARCH_MX5
+ select ARCH_MX51
+
+config SOC_IMX53
+ bool
+ select SOC_IMX5
+ select ARCH_MX5
+ select ARCH_MX53
if ARCH_IMX_V4_V5
@@ -604,6 +642,207 @@ config MACH_VPR200
Include support for VPR200 platform. This includes specific
configurations for the board and its peripherals.
+comment "i.MX5 platforms:"
+
+config MACH_MX50_RDP
+ bool "Support MX50 reference design platform"
+ depends on BROKEN
+ select SOC_IMX50
+ select IMX_HAVE_PLATFORM_IMX_I2C
+ select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+ select IMX_HAVE_PLATFORM_SPI_IMX
+ help
+ Include support for MX50 reference design platform (RDP) board. This
+ includes specific configurations for the board and its peripherals.
+
+comment "i.MX51 machines:"
+
+config MACH_IMX51_DT
+ bool "Support i.MX51 platforms from device tree"
+ select SOC_IMX51
+ select USE_OF
+ select MACH_MX51_BABBAGE
+ help
+ Include support for Freescale i.MX51 based platforms
+ using the device tree for discovery
+
+config MACH_MX51_BABBAGE
+ bool "Support MX51 BABBAGE platforms"
+ select SOC_IMX51
+ select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+ select IMX_HAVE_PLATFORM_IMX2_WDT
+ select IMX_HAVE_PLATFORM_IMX_I2C
+ select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_MXC_EHCI
+ select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+ select IMX_HAVE_PLATFORM_SPI_IMX
+ help
+ Include support for MX51 Babbage platform, also known as MX51EVK in
+ u-boot. This includes specific configurations for the board and its
+ peripherals.
+
+config MACH_MX51_3DS
+ bool "Support MX51PDK (3DS)"
+ select SOC_IMX51
+ select IMX_HAVE_PLATFORM_IMX2_WDT
+ select IMX_HAVE_PLATFORM_IMX_KEYPAD
+ select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+ select IMX_HAVE_PLATFORM_SPI_IMX
+ select MXC_DEBUG_BOARD
+ help
+ Include support for MX51PDK (3DS) platform. This includes specific
+ configurations for the board and its peripherals.
+
+config MACH_EUKREA_CPUIMX51
+ bool "Support Eukrea CPUIMX51 module"
+ select SOC_IMX51
+ select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+ select IMX_HAVE_PLATFORM_IMX_I2C
+ select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_MXC_EHCI
+ select IMX_HAVE_PLATFORM_MXC_NAND
+ select IMX_HAVE_PLATFORM_SPI_IMX
+ help
+ Include support for Eukrea CPUIMX51 platform. This includes
+ specific configurations for the module and its peripherals.
+
+choice
+ prompt "Baseboard"
+ depends on MACH_EUKREA_CPUIMX51
+ default MACH_EUKREA_MBIMX51_BASEBOARD
+
+config MACH_EUKREA_MBIMX51_BASEBOARD
+ prompt "Eukrea MBIMX51 development board"
+ bool
+ select IMX_HAVE_PLATFORM_IMX_KEYPAD
+ select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+ select LEDS_GPIO_REGISTER
+ help
+ This adds board specific devices that can be found on Eukrea's
+ MBIMX51 evaluation board.
+
+endchoice
+
+config MACH_EUKREA_CPUIMX51SD
+ bool "Support Eukrea CPUIMX51SD module"
+ select SOC_IMX51
+ select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+ select IMX_HAVE_PLATFORM_IMX_I2C
+ select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_MXC_EHCI
+ select IMX_HAVE_PLATFORM_MXC_NAND
+ select IMX_HAVE_PLATFORM_SPI_IMX
+ help
+ Include support for Eukrea CPUIMX51SD platform. This includes
+ specific configurations for the module and its peripherals.
+
+choice
+ prompt "Baseboard"
+ depends on MACH_EUKREA_CPUIMX51SD
+ default MACH_EUKREA_MBIMXSD51_BASEBOARD
+
+config MACH_EUKREA_MBIMXSD51_BASEBOARD
+ prompt "Eukrea MBIMXSD development board"
+ bool
+ select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+ select LEDS_GPIO_REGISTER
+ help
+ This adds board specific devices that can be found on Eukrea's
+ MBIMXSD evaluation board.
+
+endchoice
+
+config MX51_EFIKA_COMMON
+ bool
+ select SOC_IMX51
+ select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_MXC_EHCI
+ select IMX_HAVE_PLATFORM_PATA_IMX
+ select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+ select IMX_HAVE_PLATFORM_SPI_IMX
+ select MXC_ULPI if USB_ULPI
+
+config MACH_MX51_EFIKAMX
+ bool "Support MX51 Genesi Efika MX nettop"
+ select LEDS_GPIO_REGISTER
+ select MX51_EFIKA_COMMON
+ help
+ Include support for Genesi Efika MX nettop. This includes specific
+ configurations for the board and its peripherals.
+
+config MACH_MX51_EFIKASB
+ bool "Support MX51 Genesi Efika Smartbook"
+ select LEDS_GPIO_REGISTER
+ select MX51_EFIKA_COMMON
+ help
+ Include support for Genesi Efika Smartbook. This includes specific
+ configurations for the board and its peripherals.
+
+comment "i.MX53 machines:"
+
+config MACH_IMX53_DT
+ bool "Support i.MX53 platforms from device tree"
+ select SOC_IMX53
+ select USE_OF
+ select MACH_MX53_ARD
+ select MACH_MX53_EVK
+ select MACH_MX53_LOCO
+ select MACH_MX53_SMD
+ help
+ Include support for Freescale i.MX53 based platforms
+ using the device tree for discovery
+
+config MACH_MX53_EVK
+ bool "Support MX53 EVK platforms"
+ select SOC_IMX53
+ select IMX_HAVE_PLATFORM_IMX2_WDT
+ select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_IMX_I2C
+ select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+ select IMX_HAVE_PLATFORM_SPI_IMX
+ select LEDS_GPIO_REGISTER
+ help
+ Include support for MX53 EVK platform. This includes specific
+ configurations for the board and its peripherals.
+
+config MACH_MX53_SMD
+ bool "Support MX53 SMD platforms"
+ select SOC_IMX53
+ select IMX_HAVE_PLATFORM_IMX2_WDT
+ select IMX_HAVE_PLATFORM_IMX_I2C
+ select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+ help
+ Include support for MX53 SMD platform. This includes specific
+ configurations for the board and its peripherals.
+
+config MACH_MX53_LOCO
+ bool "Support MX53 LOCO platforms"
+ select SOC_IMX53
+ select IMX_HAVE_PLATFORM_IMX2_WDT
+ select IMX_HAVE_PLATFORM_IMX_I2C
+ select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+ select IMX_HAVE_PLATFORM_GPIO_KEYS
+ select LEDS_GPIO_REGISTER
+ help
+ Include support for MX53 LOCO platform. This includes specific
+ configurations for the board and its peripherals.
+
+config MACH_MX53_ARD
+ bool "Support MX53 ARD platforms"
+ select SOC_IMX53
+ select IMX_HAVE_PLATFORM_IMX2_WDT
+ select IMX_HAVE_PLATFORM_IMX_I2C
+ select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+ select IMX_HAVE_PLATFORM_GPIO_KEYS
+ help
+ Include support for MX53 ARD platform. This includes specific
+ configurations for the board and its peripherals.
+
comment "i.MX6 family:"
config SOC_IMX6Q
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index aba7321..9cf630a 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -11,6 +11,8 @@ obj-$(CONFIG_SOC_IMX27) += clock-imx27.o mm-imx27.o ehci-imx27.o
obj-$(CONFIG_SOC_IMX31) += mm-imx3.o cpu-imx31.o clock-imx31.o iomux-imx31.o ehci-imx31.o
obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o clock-imx35.o ehci-imx35.o
+obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clock-mx51-mx53.o ehci-imx5.o pm-imx5.o cpu_op-mx51.o
+
# Support for CMOS sensor interface
obj-$(CONFIG_MX1_VIDEO) += mx1-camera-fiq.o mx1-camera-fiq-ksym.o
@@ -71,3 +73,22 @@ obj-$(CONFIG_SMP) += platsmp.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
obj-$(CONFIG_LOCAL_TIMERS) += localtimer.o
obj-$(CONFIG_SOC_IMX6Q) += clock-imx6q.o mach-imx6q.o pm-imx6q.o
+
+# i.MX5 based machines
+obj-$(CONFIG_MACH_MX51_BABBAGE) += mach-mx51_babbage.o
+obj-$(CONFIG_MACH_MX51_3DS) += mach-mx51_3ds.o
+obj-$(CONFIG_MACH_MX53_EVK) += mach-mx53_evk.o
+obj-$(CONFIG_MACH_MX53_SMD) += mach-mx53_smd.o
+obj-$(CONFIG_MACH_MX53_LOCO) += mach-mx53_loco.o
+obj-$(CONFIG_MACH_MX53_ARD) += mach-mx53_ard.o
+obj-$(CONFIG_MACH_EUKREA_CPUIMX51) += mach-cpuimx51.o
+obj-$(CONFIG_MACH_EUKREA_MBIMX51_BASEBOARD) += eukrea_mbimx51-baseboard.o
+obj-$(CONFIG_MACH_EUKREA_CPUIMX51SD) += mach-cpuimx51sd.o
+obj-$(CONFIG_MACH_EUKREA_MBIMXSD51_BASEBOARD) += eukrea_mbimxsd-baseboard.o
+obj-$(CONFIG_MX51_EFIKA_COMMON) += mx51_efika.o
+obj-$(CONFIG_MACH_MX51_EFIKAMX) += mach-mx51_efikamx.o
+obj-$(CONFIG_MACH_MX51_EFIKASB) += mach-mx51_efikasb.o
+obj-$(CONFIG_MACH_MX50_RDP) += mach-mx50_rdp.o
+
+obj-$(CONFIG_MACH_IMX51_DT) += imx51-dt.o
+obj-$(CONFIG_MACH_IMX53_DT) += imx53-dt.o
diff --git a/arch/arm/mach-imx/Makefile.boot b/arch/arm/mach-imx/Makefile.boot
index 22d8588..2c12b78 100644
--- a/arch/arm/mach-imx/Makefile.boot
+++ b/arch/arm/mach-imx/Makefile.boot
@@ -18,6 +18,18 @@ zreladdr-$(CONFIG_ARCH_MX3) += 0x80008000
params_phys-$(CONFIG_ARCH_MX3) := 0x80000100
initrd_phys-$(CONFIG_ARCH_MX3) := 0x80800000
+zreladdr-$(CONFIG_SOC_IMX50) += 0x70008000
+params_phys-$(CONFIG_SOC_IMX50) := 0x70000100
+initrd_phys-$(CONFIG_SOC_IMX50) := 0x70800000
+
+zreladdr-$(CONFIG_SOC_IMX51) += 0x90008000
+params_phys-$(CONFIG_SOC_IMX51) := 0x90000100
+initrd_phys-$(CONFIG_SOC_IMX51) := 0x90800000
+
+zreladdr-$(CONFIG_SOC_IMX53) += 0x70008000
+params_phys-$(CONFIG_SOC_IMX53) := 0x70000100
+initrd_phys-$(CONFIG_SOC_IMX53) := 0x70800000
+
zreladdr-$(CONFIG_SOC_IMX6Q) += 0x10008000
params_phys-$(CONFIG_SOC_IMX6Q) := 0x10000100
initrd_phys-$(CONFIG_SOC_IMX6Q) := 0x10800000
diff --git a/arch/arm/mach-mx5/clock-mx51-mx53.c b/arch/arm/mach-imx/clock-mx51-mx53.c
similarity index 99%
rename from arch/arm/mach-mx5/clock-mx51-mx53.c
rename to arch/arm/mach-imx/clock-mx51-mx53.c
index 2aacf41..a2c654d 100644
--- a/arch/arm/mach-mx5/clock-mx51-mx53.c
+++ b/arch/arm/mach-imx/clock-mx51-mx53.c
@@ -23,7 +23,7 @@
#include <mach/common.h>
#include <mach/clock.h>
-#include "crm_regs.h"
+#include "crm-regs-imx5.h"
/* External clock values passed-in by the board code */
static unsigned long external_high_reference, external_low_reference;
diff --git a/arch/arm/mach-mx5/cpu.c b/arch/arm/mach-imx/cpu-imx5.c
similarity index 100%
rename from arch/arm/mach-mx5/cpu.c
rename to arch/arm/mach-imx/cpu-imx5.c
diff --git a/arch/arm/mach-mx5/cpu_op-mx51.c b/arch/arm/mach-imx/cpu_op-mx51.c
similarity index 100%
rename from arch/arm/mach-mx5/cpu_op-mx51.c
rename to arch/arm/mach-imx/cpu_op-mx51.c
diff --git a/arch/arm/mach-mx5/cpu_op-mx51.h b/arch/arm/mach-imx/cpu_op-mx51.h
similarity index 100%
rename from arch/arm/mach-mx5/cpu_op-mx51.h
rename to arch/arm/mach-imx/cpu_op-mx51.h
diff --git a/arch/arm/mach-mx5/crm_regs.h b/arch/arm/mach-imx/crm-regs-imx5.h
similarity index 100%
rename from arch/arm/mach-mx5/crm_regs.h
rename to arch/arm/mach-imx/crm-regs-imx5.h
diff --git a/arch/arm/mach-mx5/devices-imx50.h b/arch/arm/mach-imx/devices-imx50.h
similarity index 100%
rename from arch/arm/mach-mx5/devices-imx50.h
rename to arch/arm/mach-imx/devices-imx50.h
diff --git a/arch/arm/mach-mx5/devices-imx51.h b/arch/arm/mach-imx/devices-imx51.h
similarity index 100%
rename from arch/arm/mach-mx5/devices-imx51.h
rename to arch/arm/mach-imx/devices-imx51.h
diff --git a/arch/arm/mach-mx5/devices-imx53.h b/arch/arm/mach-imx/devices-imx53.h
similarity index 100%
rename from arch/arm/mach-mx5/devices-imx53.h
rename to arch/arm/mach-imx/devices-imx53.h
diff --git a/arch/arm/mach-mx5/efika.h b/arch/arm/mach-imx/efika.h
similarity index 100%
rename from arch/arm/mach-mx5/efika.h
rename to arch/arm/mach-imx/efika.h
diff --git a/arch/arm/mach-mx5/ehci.c b/arch/arm/mach-imx/ehci-imx5.c
similarity index 100%
rename from arch/arm/mach-mx5/ehci.c
rename to arch/arm/mach-imx/ehci-imx5.c
diff --git a/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c b/arch/arm/mach-imx/eukrea_mbimx51-baseboard.c
similarity index 100%
rename from arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c
rename to arch/arm/mach-imx/eukrea_mbimx51-baseboard.c
diff --git a/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c b/arch/arm/mach-imx/eukrea_mbimxsd-baseboard.c
similarity index 100%
rename from arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c
rename to arch/arm/mach-imx/eukrea_mbimxsd-baseboard.c
diff --git a/arch/arm/mach-mx5/imx51-dt.c b/arch/arm/mach-imx/imx51-dt.c
similarity index 100%
rename from arch/arm/mach-mx5/imx51-dt.c
rename to arch/arm/mach-imx/imx51-dt.c
diff --git a/arch/arm/mach-mx5/imx53-dt.c b/arch/arm/mach-imx/imx53-dt.c
similarity index 100%
rename from arch/arm/mach-mx5/imx53-dt.c
rename to arch/arm/mach-imx/imx53-dt.c
diff --git a/arch/arm/mach-mx5/board-cpuimx51.c b/arch/arm/mach-imx/mach-cpuimx51.c
similarity index 100%
rename from arch/arm/mach-mx5/board-cpuimx51.c
rename to arch/arm/mach-imx/mach-cpuimx51.c
diff --git a/arch/arm/mach-mx5/board-cpuimx51sd.c b/arch/arm/mach-imx/mach-cpuimx51sd.c
similarity index 100%
rename from arch/arm/mach-mx5/board-cpuimx51sd.c
rename to arch/arm/mach-imx/mach-cpuimx51sd.c
diff --git a/arch/arm/mach-mx5/board-mx50_rdp.c b/arch/arm/mach-imx/mach-mx50_rdp.c
similarity index 100%
rename from arch/arm/mach-mx5/board-mx50_rdp.c
rename to arch/arm/mach-imx/mach-mx50_rdp.c
diff --git a/arch/arm/mach-mx5/board-mx51_3ds.c b/arch/arm/mach-imx/mach-mx51_3ds.c
similarity index 100%
rename from arch/arm/mach-mx5/board-mx51_3ds.c
rename to arch/arm/mach-imx/mach-mx51_3ds.c
diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-imx/mach-mx51_babbage.c
similarity index 100%
rename from arch/arm/mach-mx5/board-mx51_babbage.c
rename to arch/arm/mach-imx/mach-mx51_babbage.c
diff --git a/arch/arm/mach-mx5/board-mx51_efikamx.c b/arch/arm/mach-imx/mach-mx51_efikamx.c
similarity index 100%
rename from arch/arm/mach-mx5/board-mx51_efikamx.c
rename to arch/arm/mach-imx/mach-mx51_efikamx.c
diff --git a/arch/arm/mach-mx5/board-mx51_efikasb.c b/arch/arm/mach-imx/mach-mx51_efikasb.c
similarity index 100%
rename from arch/arm/mach-mx5/board-mx51_efikasb.c
rename to arch/arm/mach-imx/mach-mx51_efikasb.c
diff --git a/arch/arm/mach-mx5/board-mx53_ard.c b/arch/arm/mach-imx/mach-mx53_ard.c
similarity index 100%
rename from arch/arm/mach-mx5/board-mx53_ard.c
rename to arch/arm/mach-imx/mach-mx53_ard.c
diff --git a/arch/arm/mach-mx5/board-mx53_evk.c b/arch/arm/mach-imx/mach-mx53_evk.c
similarity index 100%
rename from arch/arm/mach-mx5/board-mx53_evk.c
rename to arch/arm/mach-imx/mach-mx53_evk.c
diff --git a/arch/arm/mach-mx5/board-mx53_loco.c b/arch/arm/mach-imx/mach-mx53_loco.c
similarity index 100%
rename from arch/arm/mach-mx5/board-mx53_loco.c
rename to arch/arm/mach-imx/mach-mx53_loco.c
diff --git a/arch/arm/mach-mx5/board-mx53_smd.c b/arch/arm/mach-imx/mach-mx53_smd.c
similarity index 100%
rename from arch/arm/mach-mx5/board-mx53_smd.c
rename to arch/arm/mach-imx/mach-mx53_smd.c
diff --git a/arch/arm/mach-mx5/mm.c b/arch/arm/mach-imx/mm-imx5.c
similarity index 100%
rename from arch/arm/mach-mx5/mm.c
rename to arch/arm/mach-imx/mm-imx5.c
diff --git a/arch/arm/mach-mx5/mx51_efika.c b/arch/arm/mach-imx/mx51_efika.c
similarity index 100%
rename from arch/arm/mach-mx5/mx51_efika.c
rename to arch/arm/mach-imx/mx51_efika.c
diff --git a/arch/arm/mach-mx5/system.c b/arch/arm/mach-imx/pm-imx5.c
similarity index 58%
rename from arch/arm/mach-mx5/system.c
rename to arch/arm/mach-imx/pm-imx5.c
index 144ebeb..3d57b5d 100644
--- a/arch/arm/mach-mx5/system.c
+++ b/arch/arm/mach-imx/pm-imx5.c
@@ -1,8 +1,6 @@
/*
- * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
+ * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
@@ -10,14 +8,22 @@
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
-#include <linux/platform_device.h>
+#include <linux/suspend.h>
+#include <linux/clk.h>
#include <linux/io.h>
-#include <mach/hardware.h>
+#include <linux/err.h>
+#include <asm/cacheflush.h>
+#include <asm/tlbflush.h>
#include <mach/common.h>
-#include "crm_regs.h"
+#include <mach/hardware.h>
+#include "crm-regs-imx5.h"
+
+static struct clk *gpc_dvfs_clk;
-/* set cpu low power mode before WFI instruction. This function is called
- * mx5 because it can be used for mx50, mx51, and mx53.*/
+/*
+ * set cpu low power mode before WFI instruction. This function is called
+ * mx5 because it can be used for mx50, mx51, and mx53.
+ */
void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode)
{
u32 plat_lpc, arm_srpgcr, ccm_clpcr;
@@ -83,3 +89,68 @@ void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode)
__raw_writel(empgc1, MXC_SRPG_EMPGC1_SRPGCR);
}
}
+
+static int mx5_suspend_prepare(void)
+{
+ return clk_enable(gpc_dvfs_clk);
+}
+
+static int mx5_suspend_enter(suspend_state_t state)
+{
+ switch (state) {
+ case PM_SUSPEND_MEM:
+ mx5_cpu_lp_set(STOP_POWER_OFF);
+ break;
+ case PM_SUSPEND_STANDBY:
+ mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ if (state == PM_SUSPEND_MEM) {
+ local_flush_tlb_all();
+ flush_cache_all();
+
+ /*clear the EMPGC0/1 bits */
+ __raw_writel(0, MXC_SRPG_EMPGC0_SRPGCR);
+ __raw_writel(0, MXC_SRPG_EMPGC1_SRPGCR);
+ }
+ cpu_do_idle();
+ return 0;
+}
+
+static void mx5_suspend_finish(void)
+{
+ clk_disable(gpc_dvfs_clk);
+}
+
+static int mx5_pm_valid(suspend_state_t state)
+{
+ return (state > PM_SUSPEND_ON && state <= PM_SUSPEND_MAX);
+}
+
+static const struct platform_suspend_ops mx5_suspend_ops = {
+ .valid = mx5_pm_valid,
+ .prepare = mx5_suspend_prepare,
+ .enter = mx5_suspend_enter,
+ .finish = mx5_suspend_finish,
+};
+
+static int __init mx5_pm_init(void)
+{
+ if (!cpu_is_mx51() && !cpu_is_mx53())
+ return 0;
+
+ if (gpc_dvfs_clk == NULL)
+ gpc_dvfs_clk = clk_get(NULL, "gpc_dvfs");
+
+ if (!IS_ERR(gpc_dvfs_clk)) {
+ if (cpu_is_mx51())
+ suspend_set_ops(&mx5_suspend_ops);
+ } else
+ return -EPERM;
+
+ return 0;
+}
+device_initcall(mx5_pm_init);
diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig
deleted file mode 100644
index af0c212..0000000
--- a/arch/arm/mach-mx5/Kconfig
+++ /dev/null
@@ -1,244 +0,0 @@
-if ARCH_MX5
-
-# ARCH_MX5/50/53 are left to mark places where prevent multi-soc in single
-# image. So for most time, SOC_IMX50/51/53 should be used.
-
-config ARCH_MX51
- bool
-
-config ARCH_MX50
- bool
-
-config ARCH_MX53
- bool
-
-config SOC_IMX50
- bool
- select CPU_V7
- select ARM_L1_CACHE_SHIFT_6
- select MXC_TZIC
- select ARCH_MXC_IOMUX_V3
- select ARCH_MXC_AUDMUX_V2
- select ARCH_HAS_CPUFREQ
- select ARCH_MX50
-
-config SOC_IMX51
- bool
- select CPU_V7
- select ARM_L1_CACHE_SHIFT_6
- select MXC_TZIC
- select ARCH_MXC_IOMUX_V3
- select ARCH_MXC_AUDMUX_V2
- select ARCH_HAS_CPUFREQ
- select ARCH_MX51
-
-config SOC_IMX53
- bool
- select CPU_V7
- select ARM_L1_CACHE_SHIFT_6
- select MXC_TZIC
- select ARCH_MXC_IOMUX_V3
- select ARCH_MX53
-
-#comment "i.MX50 machines:"
-
-config MACH_MX50_RDP
- bool "Support MX50 reference design platform"
- depends on BROKEN
- select SOC_IMX50
- select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
- select IMX_HAVE_PLATFORM_SPI_IMX
- help
- Include support for MX50 reference design platform (RDP) board. This
- includes specific configurations for the board and its peripherals.
-
-comment "i.MX51 machines:"
-
-config MACH_IMX51_DT
- bool "Support i.MX51 platforms from device tree"
- select SOC_IMX51
- select USE_OF
- select MACH_MX51_BABBAGE
- help
- Include support for Freescale i.MX51 based platforms
- using the device tree for discovery
-
-config MACH_MX51_BABBAGE
- bool "Support MX51 BABBAGE platforms"
- select SOC_IMX51
- select IMX_HAVE_PLATFORM_FSL_USB2_UDC
- select IMX_HAVE_PLATFORM_IMX2_WDT
- select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_MXC_EHCI
- select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
- select IMX_HAVE_PLATFORM_SPI_IMX
- help
- Include support for MX51 Babbage platform, also known as MX51EVK in
- u-boot. This includes specific configurations for the board and its
- peripherals.
-
-config MACH_MX51_3DS
- bool "Support MX51PDK (3DS)"
- select SOC_IMX51
- select IMX_HAVE_PLATFORM_IMX2_WDT
- select IMX_HAVE_PLATFORM_IMX_KEYPAD
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
- select IMX_HAVE_PLATFORM_SPI_IMX
- select MXC_DEBUG_BOARD
- help
- Include support for MX51PDK (3DS) platform. This includes specific
- configurations for the board and its peripherals.
-
-config MACH_EUKREA_CPUIMX51
- bool "Support Eukrea CPUIMX51 module"
- select SOC_IMX51
- select IMX_HAVE_PLATFORM_FSL_USB2_UDC
- select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_MXC_EHCI
- select IMX_HAVE_PLATFORM_MXC_NAND
- select IMX_HAVE_PLATFORM_SPI_IMX
- help
- Include support for Eukrea CPUIMX51 platform. This includes
- specific configurations for the module and its peripherals.
-
-choice
- prompt "Baseboard"
- depends on MACH_EUKREA_CPUIMX51
- default MACH_EUKREA_MBIMX51_BASEBOARD
-
-config MACH_EUKREA_MBIMX51_BASEBOARD
- prompt "Eukrea MBIMX51 development board"
- bool
- select IMX_HAVE_PLATFORM_IMX_KEYPAD
- select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
- select LEDS_GPIO_REGISTER
- help
- This adds board specific devices that can be found on Eukrea's
- MBIMX51 evaluation board.
-
-endchoice
-
-config MACH_EUKREA_CPUIMX51SD
- bool "Support Eukrea CPUIMX51SD module"
- select SOC_IMX51
- select IMX_HAVE_PLATFORM_FSL_USB2_UDC
- select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_MXC_EHCI
- select IMX_HAVE_PLATFORM_MXC_NAND
- select IMX_HAVE_PLATFORM_SPI_IMX
- help
- Include support for Eukrea CPUIMX51SD platform. This includes
- specific configurations for the module and its peripherals.
-
-choice
- prompt "Baseboard"
- depends on MACH_EUKREA_CPUIMX51SD
- default MACH_EUKREA_MBIMXSD51_BASEBOARD
-
-config MACH_EUKREA_MBIMXSD51_BASEBOARD
- prompt "Eukrea MBIMXSD development board"
- bool
- select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
- select LEDS_GPIO_REGISTER
- help
- This adds board specific devices that can be found on Eukrea's
- MBIMXSD evaluation board.
-
-endchoice
-
-config MX51_EFIKA_COMMON
- bool
- select SOC_IMX51
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_MXC_EHCI
- select IMX_HAVE_PLATFORM_PATA_IMX
- select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
- select IMX_HAVE_PLATFORM_SPI_IMX
- select MXC_ULPI if USB_ULPI
-
-config MACH_MX51_EFIKAMX
- bool "Support MX51 Genesi Efika MX nettop"
- select LEDS_GPIO_REGISTER
- select MX51_EFIKA_COMMON
- help
- Include support for Genesi Efika MX nettop. This includes specific
- configurations for the board and its peripherals.
-
-config MACH_MX51_EFIKASB
- bool "Support MX51 Genesi Efika Smartbook"
- select LEDS_GPIO_REGISTER
- select MX51_EFIKA_COMMON
- help
- Include support for Genesi Efika Smartbook. This includes specific
- configurations for the board and its peripherals.
-
-comment "i.MX53 machines:"
-
-config MACH_IMX53_DT
- bool "Support i.MX53 platforms from device tree"
- select SOC_IMX53
- select USE_OF
- select MACH_MX53_ARD
- select MACH_MX53_EVK
- select MACH_MX53_LOCO
- select MACH_MX53_SMD
- help
- Include support for Freescale i.MX53 based platforms
- using the device tree for discovery
-
-config MACH_MX53_EVK
- bool "Support MX53 EVK platforms"
- select SOC_IMX53
- select IMX_HAVE_PLATFORM_IMX2_WDT
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
- select IMX_HAVE_PLATFORM_SPI_IMX
- select LEDS_GPIO_REGISTER
- help
- Include support for MX53 EVK platform. This includes specific
- configurations for the board and its peripherals.
-
-config MACH_MX53_SMD
- bool "Support MX53 SMD platforms"
- select SOC_IMX53
- select IMX_HAVE_PLATFORM_IMX2_WDT
- select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
- help
- Include support for MX53 SMD platform. This includes specific
- configurations for the board and its peripherals.
-
-config MACH_MX53_LOCO
- bool "Support MX53 LOCO platforms"
- select SOC_IMX53
- select IMX_HAVE_PLATFORM_IMX2_WDT
- select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
- select IMX_HAVE_PLATFORM_GPIO_KEYS
- select LEDS_GPIO_REGISTER
- help
- Include support for MX53 LOCO platform. This includes specific
- configurations for the board and its peripherals.
-
-config MACH_MX53_ARD
- bool "Support MX53 ARD platforms"
- select SOC_IMX53
- select IMX_HAVE_PLATFORM_IMX2_WDT
- select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
- select IMX_HAVE_PLATFORM_GPIO_KEYS
- help
- Include support for MX53 ARD platform. This includes specific
- configurations for the board and its peripherals.
-
-endif
diff --git a/arch/arm/mach-mx5/Makefile b/arch/arm/mach-mx5/Makefile
deleted file mode 100644
index 0fc6080..0000000
--- a/arch/arm/mach-mx5/Makefile
+++ /dev/null
@@ -1,26 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-# Object file lists.
-obj-y := cpu.o mm.o clock-mx51-mx53.o ehci.o system.o
-
-obj-$(CONFIG_PM) += pm-imx5.o
-obj-$(CONFIG_CPU_FREQ_IMX) += cpu_op-mx51.o
-obj-$(CONFIG_MACH_MX51_BABBAGE) += board-mx51_babbage.o
-obj-$(CONFIG_MACH_MX51_3DS) += board-mx51_3ds.o
-obj-$(CONFIG_MACH_MX53_EVK) += board-mx53_evk.o
-obj-$(CONFIG_MACH_MX53_SMD) += board-mx53_smd.o
-obj-$(CONFIG_MACH_MX53_LOCO) += board-mx53_loco.o
-obj-$(CONFIG_MACH_MX53_ARD) += board-mx53_ard.o
-obj-$(CONFIG_MACH_EUKREA_CPUIMX51) += board-cpuimx51.o
-obj-$(CONFIG_MACH_EUKREA_MBIMX51_BASEBOARD) += eukrea_mbimx51-baseboard.o
-obj-$(CONFIG_MACH_EUKREA_CPUIMX51SD) += board-cpuimx51sd.o
-obj-$(CONFIG_MACH_EUKREA_MBIMXSD51_BASEBOARD) += eukrea_mbimxsd-baseboard.o
-obj-$(CONFIG_MX51_EFIKA_COMMON) += mx51_efika.o
-obj-$(CONFIG_MACH_MX51_EFIKAMX) += board-mx51_efikamx.o
-obj-$(CONFIG_MACH_MX51_EFIKASB) += board-mx51_efikasb.o
-obj-$(CONFIG_MACH_MX50_RDP) += board-mx50_rdp.o
-
-obj-$(CONFIG_MACH_IMX51_DT) += imx51-dt.o
-obj-$(CONFIG_MACH_IMX53_DT) += imx53-dt.o
diff --git a/arch/arm/mach-mx5/Makefile.boot b/arch/arm/mach-mx5/Makefile.boot
deleted file mode 100644
index ca207ca..0000000
--- a/arch/arm/mach-mx5/Makefile.boot
+++ /dev/null
@@ -1,9 +0,0 @@
- zreladdr-$(CONFIG_ARCH_MX50) += 0x70008000
-params_phys-$(CONFIG_ARCH_MX50) := 0x70000100
-initrd_phys-$(CONFIG_ARCH_MX50) := 0x70800000
- zreladdr-$(CONFIG_ARCH_MX51) += 0x90008000
-params_phys-$(CONFIG_ARCH_MX51) := 0x90000100
-initrd_phys-$(CONFIG_ARCH_MX51) := 0x90800000
- zreladdr-$(CONFIG_ARCH_MX53) += 0x70008000
-params_phys-$(CONFIG_ARCH_MX53) := 0x70000100
-initrd_phys-$(CONFIG_ARCH_MX53) := 0x70800000
diff --git a/arch/arm/mach-mx5/pm-imx5.c b/arch/arm/mach-mx5/pm-imx5.c
deleted file mode 100644
index 98052fc..0000000
--- a/arch/arm/mach-mx5/pm-imx5.c
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
- * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later@the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-#include <linux/suspend.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/err.h>
-#include <asm/cacheflush.h>
-#include <asm/tlbflush.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include "crm_regs.h"
-
-static struct clk *gpc_dvfs_clk;
-
-static int mx5_suspend_prepare(void)
-{
- return clk_enable(gpc_dvfs_clk);
-}
-
-static int mx5_suspend_enter(suspend_state_t state)
-{
- switch (state) {
- case PM_SUSPEND_MEM:
- mx5_cpu_lp_set(STOP_POWER_OFF);
- break;
- case PM_SUSPEND_STANDBY:
- mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF);
- break;
- default:
- return -EINVAL;
- }
-
- if (state == PM_SUSPEND_MEM) {
- local_flush_tlb_all();
- flush_cache_all();
-
- /*clear the EMPGC0/1 bits */
- __raw_writel(0, MXC_SRPG_EMPGC0_SRPGCR);
- __raw_writel(0, MXC_SRPG_EMPGC1_SRPGCR);
- }
- cpu_do_idle();
- return 0;
-}
-
-static void mx5_suspend_finish(void)
-{
- clk_disable(gpc_dvfs_clk);
-}
-
-static int mx5_pm_valid(suspend_state_t state)
-{
- return (state > PM_SUSPEND_ON && state <= PM_SUSPEND_MAX);
-}
-
-static const struct platform_suspend_ops mx5_suspend_ops = {
- .valid = mx5_pm_valid,
- .prepare = mx5_suspend_prepare,
- .enter = mx5_suspend_enter,
- .finish = mx5_suspend_finish,
-};
-
-static int __init mx5_pm_init(void)
-{
- if (gpc_dvfs_clk == NULL)
- gpc_dvfs_clk = clk_get(NULL, "gpc_dvfs");
-
- if (!IS_ERR(gpc_dvfs_clk)) {
- if (cpu_is_mx51())
- suspend_set_ops(&mx5_suspend_ops);
- } else
- return -EPERM;
-
- return 0;
-}
-device_initcall(mx5_pm_init);
diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig
index a08a951..fdde4d1 100644
--- a/arch/arm/plat-mxc/Kconfig
+++ b/arch/arm/plat-mxc/Kconfig
@@ -17,25 +17,16 @@ config ARCH_IMX_V4_V5
and ARMv5 SoCs
config ARCH_IMX_V6_V7
- bool "i.MX3, i.MX6"
+ bool "i.MX3, i.MX5, i.MX6"
select AUTO_ZRELADDR if !ZBOOT_ROM
select ARM_PATCH_PHYS_VIRT
help
- This enables support for systems based on the Freescale i.MX3 and i.MX6
- family.
-
-config ARCH_MX5
- bool "i.MX50, i.MX51, i.MX53"
- select AUTO_ZRELADDR
- select ARM_PATCH_PHYS_VIRT
- help
- This enables support for machines using Freescale's i.MX50 and i.MX53
- processors.
+ This enables support for systems based on the Freescale i.MX3, i.MX5
+ and i.MX6 family.
endchoice
source "arch/arm/mach-imx/Kconfig"
-source "arch/arm/mach-mx5/Kconfig"
endmenu
--
1.7.7.1
^ permalink raw reply related [flat|nested] 4+ messages in thread* [PATCH 3/3] ARM i.MX: Update defconfig
2011-11-16 7:41 [PATCH v2] merge i.MX5 into mach-imx Sascha Hauer
2011-11-16 7:41 ` [PATCH 1/3] ARM i.MX5: remove unnecessary includes from board files Sascha Hauer
2011-11-16 7:41 ` [PATCH 2/3] ARM i.MX: Merge i.MX5 support into mach-imx Sascha Hauer
@ 2011-11-16 7:41 ` Sascha Hauer
2 siblings, 0 replies; 4+ messages in thread
From: Sascha Hauer @ 2011-11-16 7:41 UTC (permalink / raw)
To: linux-arm-kernel
This updates the defconfig for i.MX3, i.MX5 and i.MX6.
- all these can be compiled together now, so remove mx3_defconfig and
mx5_defconfig and introduce a imx_v6_v7_defconfig instead.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
.../configs/{mx5_defconfig => imx_v6_v7_defconfig} | 61 +++++----
arch/arm/configs/mx3_defconfig | 144 --------------------
2 files changed, 35 insertions(+), 170 deletions(-)
rename arch/arm/configs/{mx5_defconfig => imx_v6_v7_defconfig} (80%)
delete mode 100644 arch/arm/configs/mx3_defconfig
diff --git a/arch/arm/configs/mx5_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
similarity index 80%
rename from arch/arm/configs/mx5_defconfig
rename to arch/arm/configs/imx_v6_v7_defconfig
index d0d8dfe..3a4fb2e 100644
--- a/arch/arm/configs/mx5_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -3,6 +3,7 @@ CONFIG_EXPERIMENTAL=y
CONFIG_KERNEL_LZO=y
CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=18
+CONFIG_CGROUPS=y
CONFIG_RELAY=y
CONFIG_EXPERT=y
# CONFIG_SLUB_DEBUG is not set
@@ -14,20 +15,31 @@ CONFIG_MODULE_SRCVERSION_ALL=y
# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
CONFIG_ARCH_MXC=y
-CONFIG_ARCH_MX5=y
-CONFIG_MACH_MX51_BABBAGE=y
+CONFIG_MACH_MX31LILLY=y
+CONFIG_MACH_MX31LITE=y
+CONFIG_MACH_PCM037=y
+CONFIG_MACH_PCM037_EET=y
+CONFIG_MACH_MX31_3DS=y
+CONFIG_MACH_MX31MOBOARD=y
+CONFIG_MACH_QONG=y
+CONFIG_MACH_ARMADILLO5X0=y
+CONFIG_MACH_KZM_ARM11_01=y
+CONFIG_MACH_PCM043=y
+CONFIG_MACH_MX35_3DS=y
+CONFIG_MACH_EUKREA_CPUIMX35=y
+CONFIG_MACH_VPR200=y
+CONFIG_MACH_IMX51_DT=y
CONFIG_MACH_MX51_3DS=y
CONFIG_MACH_EUKREA_CPUIMX51=y
CONFIG_MACH_EUKREA_CPUIMX51SD=y
CONFIG_MACH_MX51_EFIKAMX=y
CONFIG_MACH_MX51_EFIKASB=y
-CONFIG_MACH_MX53_EVK=y
-CONFIG_MACH_MX53_SMD=y
-CONFIG_MACH_MX53_LOCO=y
-CONFIG_MACH_MX53_ARD=y
+CONFIG_MACH_IMX53_DT=y
+CONFIG_SOC_IMX6Q=y
CONFIG_MXC_PWM=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
+CONFIG_SMP=y
CONFIG_VMSPLIT_2G=y
CONFIG_PREEMPT_VOLUNTARY=y
CONFIG_AEABI=y
@@ -49,7 +61,7 @@ CONFIG_IP_PNP_DHCP=y
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
+CONFIG_IPV6=y
# CONFIG_WIRELESS is not set
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
@@ -68,24 +80,20 @@ CONFIG_SCSI_SCAN_ASYNC=y
CONFIG_ATA=y
CONFIG_PATA_IMX=y
CONFIG_NETDEVICES=y
-CONFIG_MII=m
-CONFIG_MARVELL_PHY=y
-CONFIG_DAVICOM_PHY=y
-CONFIG_QSEMI_PHY=y
-CONFIG_LXT_PHY=y
-CONFIG_CICADA_PHY=y
-CONFIG_VITESSE_PHY=y
-CONFIG_SMSC_PHY=y
-CONFIG_BROADCOM_PHY=y
-CONFIG_ICPLUS_PHY=y
-CONFIG_REALTEK_PHY=y
-CONFIG_NATIONAL_PHY=y
-CONFIG_STE10XP=y
-CONFIG_LSI_ET1011C_PHY=y
-CONFIG_MICREL_PHY=y
-CONFIG_NET_ETHERNET=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_CHELSIO is not set
+# CONFIG_NET_VENDOR_FARADAY is not set
+CONFIG_FEC=y
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_MICROCHIP is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+CONFIG_SMC91X=y
+CONFIG_SMC911X=y
+CONFIG_SMSC911X=y
+# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_WLAN is not set
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_EVDEV=y
@@ -124,7 +132,6 @@ CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_MXC=y
CONFIG_USB_STORAGE=y
CONFIG_MMC=y
-CONFIG_MMC_BLOCK=m
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_SDHCI_ESDHC_IMX=y
@@ -133,6 +140,8 @@ CONFIG_LEDS_CLASS=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_INTF_DEV_UIE_EMUL=y
CONFIG_RTC_MXC=y
+CONFIG_DMADEVICES=y
+CONFIG_IMX_SDMA=y
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
diff --git a/arch/arm/configs/mx3_defconfig b/arch/arm/configs/mx3_defconfig
deleted file mode 100644
index cb0717f..0000000
--- a/arch/arm/configs/mx3_defconfig
+++ /dev/null
@@ -1,144 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_EXPERT=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_MXC=y
-CONFIG_MACH_MX31ADS_WM1133_EV1=y
-CONFIG_MACH_MX31LILLY=y
-CONFIG_MACH_MX31LITE=y
-CONFIG_MACH_PCM037=y
-CONFIG_MACH_PCM037_EET=y
-CONFIG_MACH_MX31_3DS=y
-CONFIG_MACH_MX31MOBOARD=y
-CONFIG_MACH_QONG=y
-CONFIG_MACH_ARMADILLO5X0=y
-CONFIG_MACH_KZM_ARM11_01=y
-CONFIG_MACH_PCM043=y
-CONFIG_MACH_MX35_3DS=y
-CONFIG_MACH_EUKREA_CPUIMX35=y
-CONFIG_MXC_IRQ_PRIOR=y
-CONFIG_MXC_PWM=y
-CONFIG_ARM_ERRATA_411920=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw ip=off"
-CONFIG_VFP=y
-CONFIG_PM_DEBUG=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_FW_LOADER=m
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_MXC=y
-CONFIG_MTD_UBI=y
-# CONFIG_BLK_DEV is not set
-CONFIG_MISC_DEVICES=y
-CONFIG_EEPROM_AT24=y
-CONFIG_NETDEVICES=y
-CONFIG_SMSC_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMSC911X=y
-CONFIG_DNET=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_IMX=y
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_SERIAL_8250=m
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_IMX=y
-CONFIG_SERIAL_IMX_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_IMX=y
-CONFIG_SPI=y
-CONFIG_W1=y
-CONFIG_W1_MASTER_MXC=y
-CONFIG_W1_SLAVE_THERM=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_IMX2_WDT=y
-CONFIG_MFD_WM8350_I2C=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_WM8350=y
-CONFIG_MEDIA_SUPPORT=y
-CONFIG_VIDEO_DEV=y
-# CONFIG_RC_CORE is not set
-# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
-CONFIG_SOC_CAMERA=y
-CONFIG_SOC_CAMERA_MT9M001=y
-CONFIG_SOC_CAMERA_MT9M111=y
-CONFIG_SOC_CAMERA_MT9T031=y
-CONFIG_SOC_CAMERA_MT9V022=y
-CONFIG_SOC_CAMERA_TW9910=y
-CONFIG_SOC_CAMERA_OV772X=y
-CONFIG_VIDEO_MX3=y
-# CONFIG_RADIO_ADAPTERS is not set
-CONFIG_FB=y
-CONFIG_SOUND=y
-CONFIG_SND=y
-# CONFIG_SND_ARM is not set
-# CONFIG_SND_SPI is not set
-CONFIG_SND_SOC=y
-CONFIG_SND_IMX_SOC=y
-CONFIG_SND_MXC_SOC_WM1133_EV1=y
-CONFIG_SND_SOC_PHYCORE_AC97=y
-CONFIG_SND_SOC_EUKREA_TLV320=y
-CONFIG_USB=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_MXC=y
-CONFIG_USB_GADGET=m
-CONFIG_USB_FSL_USB2=m
-CONFIG_USB_G_SERIAL=m
-CONFIG_USB_ULPI=y
-CONFIG_MMC=y
-CONFIG_MMC_MXC=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_MXC=y
-CONFIG_DMADEVICES=y
-# CONFIG_DNOTIFY is not set
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_UBIFS_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
--
1.7.7.1
^ permalink raw reply related [flat|nested] 4+ messages in thread