From mboxrd@z Thu Jan 1 00:00:00 1970 From: weber@corscience.de (Thomas Weber) Date: Wed, 16 Nov 2011 19:56:12 +0100 Subject: [PATCHv2] ARM: OMAP: hsmmc: Fix mux for non-OMAP pins Message-ID: <1321469772-801-1-git-send-email-weber@corscience.de> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org The Devkit8000 uses a TWL4030 pin for card detection. Thats why the error: _omap_mux_init_gpio: Could not set gpio192 occurs. This patch checks that the pin is on OMAP before calling omap_mux_init_gpio. Signed-off-by: Thomas Weber --- Changelog: v2: Remove backslash at end of line arch/arm/mach-omap2/hsmmc.c | 6 ++++-- 1 files changed, 4 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c index f4a1020..c3aea79 100644 --- a/arch/arm/mach-omap2/hsmmc.c +++ b/arch/arm/mach-omap2/hsmmc.c @@ -200,10 +200,12 @@ static int nop_mmc_set_power(struct device *dev, int slot, int power_on, static inline void omap_hsmmc_mux(struct omap_mmc_platform_data *mmc_controller, int controller_nr) { - if (gpio_is_valid(mmc_controller->slots[0].switch_pin)) + if (gpio_is_valid(mmc_controller->slots[0].switch_pin) && + (mmc_controller->slots[0].switch_pin < OMAP_MAX_GPIO_LINES)) omap_mux_init_gpio(mmc_controller->slots[0].switch_pin, OMAP_PIN_INPUT_PULLUP); - if (gpio_is_valid(mmc_controller->slots[0].gpio_wp)) + if (gpio_is_valid(mmc_controller->slots[0].gpio_wp) && + (mmc_controller->slots[0].gpio_wp < OMAP_MAX_GPIO_LINES)) omap_mux_init_gpio(mmc_controller->slots[0].gpio_wp, OMAP_PIN_INPUT_PULLUP); if (cpu_is_omap34xx()) { -- 1.7.7.3