From: broonie@opensource.wolfsonmicro.com (Mark Brown)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 7/7] ARM: S3C64XX: Hook up Littlemill audio card on Cragganmore
Date: Tue, 29 Nov 2011 13:30:31 +0000 [thread overview]
Message-ID: <1322573431-8923-7-git-send-email-broonie@opensource.wolfsonmicro.com> (raw)
In-Reply-To: <1322573431-8923-1-git-send-email-broonie@opensource.wolfsonmicro.com>
The Littlemill audio card is an adaptor card which can take any 6220-EV1
CODEC daughtercard. Provide standard support for the use of WM8994 class
devices on the Littlemill card, configuring the MFD for WM8958 usage as
this part is a superset of all others and the driver will use runtime
detection to identify the actually fitted part given the configuration for
the superset.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
arch/arm/mach-s3c64xx/include/mach/crag6410.h | 6 ++++--
arch/arm/mach-s3c64xx/include/mach/irqs.h | 2 +-
arch/arm/mach-s3c64xx/mach-crag6410-module.c | 21 +++++++++++++++++++++
arch/arm/mach-s3c64xx/mach-crag6410.c | 6 ++++++
4 files changed, 32 insertions(+), 3 deletions(-)
diff --git a/arch/arm/mach-s3c64xx/include/mach/crag6410.h b/arch/arm/mach-s3c64xx/include/mach/crag6410.h
index be9074e..5d55ab0 100644
--- a/arch/arm/mach-s3c64xx/include/mach/crag6410.h
+++ b/arch/arm/mach-s3c64xx/include/mach/crag6410.h
@@ -15,9 +15,11 @@
#define BANFF_PMIC_IRQ_BASE IRQ_BOARD_START
#define GLENFARCLAS_PMIC_IRQ_BASE (IRQ_BOARD_START + 64)
+#define CODEC_IRQ_BASE (IRQ_BOARD_START + 128)
#define PCA935X_GPIO_BASE GPIO_BOARD_START
-#define CODEC_GPIO_BASE (GPIO_BOARD_START + 8)
-#define GLENFARCLAS_PMIC_GPIO_BASE (GPIO_BOARD_START + 16)
+#define CODEC_GPIO_BASE (GPIO_BOARD_START + 8)
+#define GLENFARCLAS_PMIC_GPIO_BASE (GPIO_BOARD_START + 32)
+#define BANFF_PMIC_GPIO_BASE (GPIO_BOARD_START + 64)
#endif
diff --git a/arch/arm/mach-s3c64xx/include/mach/irqs.h b/arch/arm/mach-s3c64xx/include/mach/irqs.h
index 443f85b..96d60e0 100644
--- a/arch/arm/mach-s3c64xx/include/mach/irqs.h
+++ b/arch/arm/mach-s3c64xx/include/mach/irqs.h
@@ -169,7 +169,7 @@
#define IRQ_BOARD_START (IRQ_EINT_GROUP9_BASE + IRQ_EINT_GROUP9_NR + 1)
#ifdef CONFIG_MACH_WLF_CRAGG_6410
-#define IRQ_BOARD_NR 128
+#define IRQ_BOARD_NR 160
#elif defined(CONFIG_SMDK6410_WM1190_EV1)
#define IRQ_BOARD_NR 64
#elif defined(CONFIG_SMDK6410_WM1192_EV1)
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
index c492f75..3fa7ebc 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410-module.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
@@ -14,6 +14,7 @@
#include <linux/mfd/wm831x/irq.h>
#include <linux/mfd/wm831x/gpio.h>
+#include <linux/mfd/wm8994/pdata.h>
#include <sound/wm5100.h>
#include <sound/wm8996.h>
@@ -133,6 +134,24 @@ static const struct i2c_board_info wm1259_devs[] = {
},
};
+static struct wm8994_pdata wm8994_pdata = {
+ .gpio_base = CODEC_GPIO_BASE,
+ .gpio_defaults = {
+ 0x3, /* IRQ out, active high, CMOS */
+ },
+ .irq_base = CODEC_IRQ_BASE,
+ .ldo = {
+ { .supply = "WALLVDD" },
+ { .supply = "WALLVDD" },
+ },
+};
+
+static const struct i2c_board_info wm1277_devs[] = {
+ { I2C_BOARD_INFO("wm8958", 0x1a), /* WM8958 is the superset */
+ .platform_data = &wm8994_pdata,
+ .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2,
+ },
+};
static __devinitdata const struct {
u8 id;
@@ -154,6 +173,8 @@ static __devinitdata const struct {
{ .id = 0x3b, .name = "1255-EV1 Kilchoman",
.i2c_devs = wm1255_devs, .num_i2c_devs = ARRAY_SIZE(wm1255_devs) },
{ .id = 0x3c, .name = "1273-EV1 Longmorn" },
+ { .id = 0x3d, .name = "1277-EV1 Littlemill",
+ .i2c_devs = wm1277_devs, .num_i2c_devs = ARRAY_SIZE(wm1277_devs) },
};
static __devinit int wlf_gf_module_probe(struct i2c_client *i2c,
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c
index 05f598f..ac9514a 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410.c
@@ -289,6 +289,11 @@ static struct platform_device speyside_wm8962_device = {
.id = -1,
};
+static struct platform_device littlemill_device = {
+ .name = "littlemill",
+ .id = -1,
+};
+
static struct regulator_consumer_supply wallvdd_consumers[] = {
REGULATOR_SUPPLY("SPKVDD1", "1-001a"),
REGULATOR_SUPPLY("SPKVDD2", "1-001a"),
@@ -341,6 +346,7 @@ static struct platform_device *crag6410_devices[] __initdata = {
&crag6410_backlight_device,
&speyside_device,
&speyside_wm8962_device,
+ &littlemill_device,
&lowland_device,
&wallvdd_device,
};
--
1.7.7.3
next prev parent reply other threads:[~2011-11-29 13:30 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-11-29 13:30 [PATCH 0/7] Cragganmore updates for 3.3 Mark Brown
2011-11-29 13:30 ` [PATCH 1/7] ARM: S3C64XX: Raise the frequency of the second I2C bus on Cragganmore Mark Brown
2011-11-29 13:30 ` [PATCH 2/7] ARM: S3C64XX: Use software initiated powerdown for Cragganmore Mark Brown
2011-11-29 13:30 ` [PATCH 3/7] ARM: S3C64XX: Configure WM1250 EV1 GPIOs on Cragganmore Mark Brown
2011-11-29 13:30 ` [PATCH 4/7] ARM: S3C64XX: Improve logging of unknown Cragganmore module types Mark Brown
2011-11-29 13:30 ` [PATCH 5/7] ARM: S3C64XX: Run Tobermory interrupts in the default mode Mark Brown
2011-11-29 13:30 ` [PATCH 6/7] ARM: S3C64XX: Hook up platform data for Kilchomin module on Cragganmore Mark Brown
2011-11-29 13:30 ` Mark Brown [this message]
2011-12-01 10:29 ` [PATCH 0/7] Cragganmore updates for 3.3 Kukjin Kim
2011-12-01 11:37 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1322573431-8923-7-git-send-email-broonie@opensource.wolfsonmicro.com \
--to=broonie@opensource.wolfsonmicro.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).