From mboxrd@z Thu Jan  1 00:00:00 1970
From: pawel.moll@arm.com (Pawel Moll)
Date: Wed, 30 Nov 2011 17:15:02 +0000
Subject: [PATCH v3 4/5] ARM: vexpress: Initial RS1 memory map support
In-Reply-To: <20111130153749.GE2045@localhost.localdomain>
References: <1322579473-8804-1-git-send-email-pawel.moll@arm.com>
 <1322579473-8804-5-git-send-email-pawel.moll@arm.com>
 <20111130153749.GE2045@localhost.localdomain>
Message-ID: <1322673302.3180.25.camel@hornet.cambridge.arm.com>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

On Wed, 2011-11-30 at 15:37 +0000, Dave Martin wrote:
>
> This results in a uImage which is a bit broken if using a normal u-Boot
> configured for vexpress-v2p-ca9, because the bootloader makes some
> memory map assumptions, and anyway we don't expect the kernel to work
> unless it's loaded at the start of RAM:
> 
> 
> ## Booting kernel from Legacy Image at 62000400 ...
>    Image Name:   Linux-3.2.0-rc3+
>    Image Type:   ARM Linux Kernel Image (uncompressed)
>    Data Size:    2464984 Bytes = 2.4 MiB
>    Load Address: 80008000
>    Entry Point:  80008000
>    Verifying Checksum ... OK
> ## Loading init Ramdisk from Legacy Image at 80ffffc0 ...
>    Image Name:
>    Image Type:   ARM Linux RAMDisk Image (uncompressed)
>    Data Size:    2216523 Bytes = 2.1 MiB
>    Load Address: 81000000
>    Entry Point:  81000000
>    Verifying Checksum ... OK
> ## Flattened Device Tree blob at 80ffc000
>    Booting using the fdt blob at 0x80ffc000
>    Loading Kernel Image ... OK
> OK
>    Loading Ramdisk to 7fcd3000, end 7fef024b ... OK
>    Loading Device Tree to 7fcce000, end 7fcd2779 ... OK
> 
> Starting kernel ...
> 
> Uncompressing Linux... done, booting the kernel.
> Booting Linux on physical CPU 0
> Initializing cgroup subsys cpuset
> Linux version 3.2.0-rc3+ (davem at e103592) (gcc version 4.5.2 (Ubuntu/Linaro 4.5.2-8ubuntu3) ) #12 SMP Wed Nov 30 15:10:19 GMT 2011
> CPU: ARMv7 Processor [410fc091] revision 1 (ARMv7), cr=10c53c7d
> CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
> Machine: ARM Versatile Express, model: V2P-CA9
> bootconsole [earlycon0] enabled
> Ignoring RAM at 60000000-7fffffff (vmalloc region overlap).
> Ignoring RAM at 60000000-9fffffff (vmalloc region overlap).
> INITRD: 0x7fcd3000+0x0021d24b is not a memory region - disabling initrd
> Memory policy: ECC disabled, Data cache writeall
> Cheers
> ---Dave
> 
> 
> oc
> 
> <HANG>

Yes, this is known problem with U-boot. Could you try again with
"mem=512M" parameter?

> If I strip the uImage and rebuild it with -a 0x60008000 -e 0x60008000
> and no other changes, that's sufficient to give me a fully booting
> kernel.  I can also boot a single image on v2p-ca9 both with and without
> a dtb in this configuration.
> 
> I'm using a Linaro u-Boot from a couple of releses ago; it's possible
> things have changed since.
> 
> Do you know of any specific u-Boot version which shouldn't have these
> problems?
> 
> Was the hard-coded uImage load address/entry point problem ever fixed?
> (It totally defeats loading a single uImage on multiple board variants.)

I simply don't use U-boot at all, what solves the problem
"systematically" ;-) I wonder if it was possible to override the
load/entry address in the runtime?

Cheers!

Pawe?