From: rob.lee@linaro.org (Robert Lee)
To: linux-arm-kernel@lists.infradead.org
Subject: [RFC PATCH 5/8] ARM: davinci: Replace init with new common ARM cpuidle init code
Date: Mon, 5 Dec 2011 22:38:08 -0600 [thread overview]
Message-ID: <1323146291-10676-6-git-send-email-rob.lee@linaro.org> (raw)
In-Reply-To: <1323146291-10676-1-git-send-email-rob.lee@linaro.org>
Replace duplicated cpuidle init functionality with common ARM cpuidle
init implementation.
Signed-off-by: Robert Lee <rob.lee@linaro.org>
---
arch/arm/mach-davinci/cpuidle.c | 73 ++++++++++++--------------------------
1 files changed, 23 insertions(+), 50 deletions(-)
diff --git a/arch/arm/mach-davinci/cpuidle.c b/arch/arm/mach-davinci/cpuidle.c
index a30c7c5..d154c56 100644
--- a/arch/arm/mach-davinci/cpuidle.c
+++ b/arch/arm/mach-davinci/cpuidle.c
@@ -18,7 +18,7 @@
#include <linux/io.h>
#include <linux/export.h>
#include <asm/proc-fns.h>
-
+#include <asm/cpuidle.h>
#include <mach/cpuidle.h>
#include <mach/ddr2.h>
@@ -36,9 +36,23 @@ struct davinci_ops {
static struct cpuidle_driver davinci_idle_driver = {
.name = "cpuidle-davinci",
.owner = THIS_MODULE,
+ .states[0] = {
+ .exit_latency = 1,
+ .target_residency = 100000,
+ .flags = CPUIDLE_FLAG_TIME_VALID,
+ .name = "WFI",
+ .desc = "Wait for interrupt",
+ },
+ .states[1] = {
+ .exit_latency = 10,
+ .target_residency = 100000,
+ .flags = CPUIDLE_FLAG_TIME_VALID,
+ .name = "DDR SR",
+ .desc = "WFI and DDR Self Refresh",
+ },
+ .state_count = DAVINCI_CPUIDLE_MAX_STATES,
};
-static DEFINE_PER_CPU(struct cpuidle_device, davinci_cpuidle_device);
static void __iomem *ddr2_reg_base;
static void davinci_save_ddr_power(int enter, bool pdown)
@@ -77,6 +91,8 @@ static struct davinci_ops davinci_states[DAVINCI_CPUIDLE_MAX_STATES] = {
},
};
+void *states_usage_driver_data[DAVINCI_CPUIDLE_MAX_STATES] __initdata;
+
/* Actual code that puts the SoC in different idle states */
static int davinci_enter_idle(struct cpuidle_device *dev,
struct cpuidle_driver *drv,
@@ -84,11 +100,6 @@ static int davinci_enter_idle(struct cpuidle_device *dev,
{
struct cpuidle_state_usage *state_usage = &dev->states_usage[index];
struct davinci_ops *ops = cpuidle_get_statedata(state_usage);
- struct timeval before, after;
- int idle_time;
-
- local_irq_disable();
- do_gettimeofday(&before);
if (ops && ops->enter)
ops->enter(ops->flags);
@@ -97,25 +108,14 @@ static int davinci_enter_idle(struct cpuidle_device *dev,
if (ops && ops->exit)
ops->exit(ops->flags);
- do_gettimeofday(&after);
- local_irq_enable();
- idle_time = (after.tv_sec - before.tv_sec) * USEC_PER_SEC +
- (after.tv_usec - before.tv_usec);
-
- dev->last_residency = idle_time;
-
return index;
}
static int __init davinci_cpuidle_probe(struct platform_device *pdev)
{
int ret;
- struct cpuidle_device *device;
- struct cpuidle_driver *driver = &davinci_idle_driver;
struct davinci_cpuidle_config *pdata = pdev->dev.platform_data;
- device = &per_cpu(davinci_cpuidle_device, smp_processor_id());
-
if (!pdata) {
dev_err(&pdev->dev, "cannot get platform data\n");
return -ENOENT;
@@ -123,42 +123,16 @@ static int __init davinci_cpuidle_probe(struct platform_device *pdev)
ddr2_reg_base = pdata->ddr2_ctlr_base;
- /* Wait for interrupt state */
- driver->states[0].enter = davinci_enter_idle;
- driver->states[0].exit_latency = 1;
- driver->states[0].target_residency = 10000;
- driver->states[0].flags = CPUIDLE_FLAG_TIME_VALID;
- strcpy(driver->states[0].name, "WFI");
- strcpy(driver->states[0].desc, "Wait for interrupt");
-
- /* Wait for interrupt and DDR self refresh state */
- driver->states[1].enter = davinci_enter_idle;
- driver->states[1].exit_latency = 10;
- driver->states[1].target_residency = 10000;
- driver->states[1].flags = CPUIDLE_FLAG_TIME_VALID;
- strcpy(driver->states[1].name, "DDR SR");
- strcpy(driver->states[1].desc, "WFI and DDR Self Refresh");
if (pdata->ddr2_pdown)
davinci_states[1].flags |= DAVINCI_CPUIDLE_FLAGS_DDR2_PWDN;
- cpuidle_set_statedata(&device->states_usage[1], &davinci_states[1]);
-
- device->state_count = DAVINCI_CPUIDLE_MAX_STATES;
- driver->state_count = DAVINCI_CPUIDLE_MAX_STATES;
- ret = cpuidle_register_driver(&davinci_idle_driver);
- if (ret) {
- dev_err(&pdev->dev, "failed to register driver\n");
- return ret;
- }
+ states_usage_driver_data[1] = &davinci_states[1];
- ret = cpuidle_register_device(device);
- if (ret) {
- dev_err(&pdev->dev, "failed to register device\n");
- cpuidle_unregister_driver(&davinci_idle_driver);
- return ret;
- }
+ ret = arm_cpuidle_init(&davinci_idle_driver,
+ davinci_enter_idle,
+ states_usage_driver_data);
- return 0;
+ return ret;
}
static struct platform_driver davinci_cpuidle_driver = {
@@ -174,4 +148,3 @@ static int __init davinci_cpuidle_init(void)
davinci_cpuidle_probe);
}
device_initcall(davinci_cpuidle_init);
-
--
1.7.1
next prev parent reply other threads:[~2011-12-06 4:38 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-12-06 4:38 [RFC PATCH 0/8] Add common ARM cpuidle init code Robert Lee
2011-12-06 4:38 ` [RFC PATCH 1/8] ARM: Add commonly used " Robert Lee
2011-12-06 11:47 ` Mark Brown
2011-12-08 17:34 ` Rob Lee
2011-12-09 8:25 ` Mark Brown
2011-12-06 15:06 ` Rob Herring
2011-12-08 21:46 ` Rob Lee
2011-12-09 13:54 ` Rob Herring
2011-12-09 15:55 ` Rob Lee
2011-12-09 19:48 ` Nicolas Pitre
2011-12-06 4:38 ` [RFC PATCH 2/8] ARM: at91: Replace init with new common ARM " Robert Lee
2011-12-06 4:38 ` [RFC PATCH 3/8] ARM: kirkwood: " Robert Lee
2011-12-06 4:38 ` [RFC PATCH 4/8] ARM: exynos: " Robert Lee
2011-12-06 4:38 ` Robert Lee [this message]
2011-12-06 4:38 ` [RFC PATCH 6/8] ARM: shmobile: " Robert Lee
2011-12-06 4:38 ` [RFC PATCH 7/8] ARM: imx: Add mx5 clock changes necessary for low power Robert Lee
2011-12-06 4:38 ` [RFC PATCH 8/8] ARM: imx: Add mx5 cpuidle implmentation Robert Lee
2011-12-08 14:56 ` [RFC PATCH 0/8] Add common ARM cpuidle init code Shawn Guo
2011-12-08 15:37 ` Arnd Bergmann
2012-01-03 14:54 ` Daniel Lezcano
2012-01-03 16:02 ` Arnd Bergmann
2012-01-04 9:17 ` Daniel Lezcano
2012-01-04 18:05 ` Rob Lee
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1323146291-10676-6-git-send-email-rob.lee@linaro.org \
--to=rob.lee@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).