From: hemantp@ti.com (Hemant Pedanekar)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH RESEND v5 0/3] Add support for TI814X processor series
Date: Sat, 10 Dec 2011 07:28:22 +0530 [thread overview]
Message-ID: <1323482305-32155-1-git-send-email-hemantp@ti.com> (raw)
This patch set adds support for DM814x/AM387x device series having Cortex-A8
MPU.
The technical documents are available from following link:
http://focus.ti.com/docs/prod/folders/print/tms320dm8148.html
This series is referred in code as TI814X.
Since these devices share similar architecture as TI816X devices, existing
TI816X code is updated to accomodate TI814X support. The code shared across
TI816X and TI814X devices is updated with TI81XX/ti81xx prefix as applicable,
while maintaining cpu_is_ti816x() and cpu_is_ti814x() to distinguish specific
execution differences.
Changes since v4:
1) Rebased on linux-omap/soc branch.
2) Updated for map_io and common.h changes.
Changes since v3:
1) Avoid renaming board-ti8168evm.c, just add TI8148 EVM support in it.
2) Drop changes in clock related data variables from u8 to u16 since the same
was incorporated as part of AM33xx addition.
Changes since v2:
1) Incorporate Tony's suggestion about moving ti8168_evm_map_io() to
arch/arm/mach-omap2/common.c to keep common across TI81XX.
2) Keeping single board file (board-ti81xxevm.c) for TI816X and TI814X EVMs
Changes since v1:
1) Rebased and updated after Paul's CHIP_IS removal changes
2) Removed call to omap2_init_common_devices() as per Kevin's comment
Hemant Pedanekar (3):
ARM: OMAP: TI81XX: Prepare for addition of TI814X support
ARM: OMAP: TI814X: Add cpu type macros and detection support
ARM: OMAP: TI814X: Create board support and enable build for TI8148
EVM
arch/arm/mach-omap2/Kconfig | 11 +++++--
arch/arm/mach-omap2/Makefile | 1 +
arch/arm/mach-omap2/board-ti8168evm.c | 33 +++++++++++--------
arch/arm/mach-omap2/clock3xxx_data.c | 5 ++-
arch/arm/mach-omap2/common.c | 29 ++++++++++-------
arch/arm/mach-omap2/common.h | 13 ++++---
arch/arm/mach-omap2/control.h | 8 ++--
arch/arm/mach-omap2/id.c | 29 +++++++++++++++--
arch/arm/mach-omap2/include/mach/debug-macro.S | 12 +++---
arch/arm/mach-omap2/io.c | 14 ++++----
arch/arm/mach-omap2/irq.c | 2 +-
arch/arm/mach-omap2/serial.c | 6 ++--
arch/arm/plat-omap/include/plat/clkdev_omap.h | 1 +
arch/arm/plat-omap/include/plat/clock.h | 1 +
arch/arm/plat-omap/include/plat/cpu.h | 22 +++++++++++++
arch/arm/plat-omap/include/plat/hardware.h | 2 +-
arch/arm/plat-omap/include/plat/serial.h | 14 ++++----
.../plat-omap/include/plat/{ti816x.h => ti81xx.h} | 18 +++++-----
arch/arm/plat-omap/include/plat/uncompress.h | 11 ++++--
19 files changed, 150 insertions(+), 82 deletions(-)
rename arch/arm/plat-omap/include/plat/{ti816x.h => ti81xx.h} (60%)
next reply other threads:[~2011-12-10 1:58 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-12-10 1:58 Hemant Pedanekar [this message]
2011-12-10 1:58 ` [PATCH RESEND v5 1/3] ARM: OMAP: TI81XX: Prepare for addition of TI814X support Hemant Pedanekar
2011-12-10 1:58 ` [PATCH RESEND v5 2/3] ARM: OMAP: TI814X: Add cpu type macros and detection support Hemant Pedanekar
2011-12-10 1:58 ` [PATCH RESEND v5 3/3] ARM: OMAP: TI814X: Create board support and enable build for TI8148 EVM Hemant Pedanekar
2011-12-12 18:25 ` [PATCH RESEND v5 0/3] Add support for TI814X processor series Tony Lindgren
-- strict thread matches above, loose matches on Subject: below --
2011-12-10 1:44 Hemant Pedanekar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1323482305-32155-1-git-send-email-hemantp@ti.com \
--to=hemantp@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).