* [PATCH RESEND v5 1/3] ARM: OMAP: TI81XX: Prepare for addition of TI814X support
2011-12-10 1:58 [PATCH RESEND v5 0/3] Add support for TI814X processor series Hemant Pedanekar
@ 2011-12-10 1:58 ` Hemant Pedanekar
2011-12-10 1:58 ` [PATCH RESEND v5 2/3] ARM: OMAP: TI814X: Add cpu type macros and detection support Hemant Pedanekar
` (2 subsequent siblings)
3 siblings, 0 replies; 6+ messages in thread
From: Hemant Pedanekar @ 2011-12-10 1:58 UTC (permalink / raw)
To: linux-arm-kernel
This patch updates existing macros, functions used for TI816X, to enable
addition of other SoCs belonging to TI81XX family (e.g., TI814X).
The approach taken is to use TI81XX/ti81xx for code/data going to be common
across all TI81XX devices.
cpu_is_ti81xx() is introduced to handle code common across TI81XX devices.
In addition, ti8168_evm_map_io() is now replaced with ti81xx_map_io() and moved
in mach-omap2/common.c as same will be used for TI814X and is not board
specific.
Signed-off-by: Hemant Pedanekar <hemantp@ti.com>
---
arch/arm/mach-omap2/Kconfig | 6 ++--
arch/arm/mach-omap2/board-ti8168evm.c | 11 ++-----
arch/arm/mach-omap2/clock3xxx_data.c | 2 +-
arch/arm/mach-omap2/common.c | 29 +++++++++++--------
arch/arm/mach-omap2/common.h | 13 +++++----
arch/arm/mach-omap2/control.h | 8 +++---
arch/arm/mach-omap2/id.c | 8 +++---
arch/arm/mach-omap2/include/mach/debug-macro.S | 12 ++++----
arch/arm/mach-omap2/io.c | 14 +++++-----
arch/arm/mach-omap2/irq.c | 2 +-
arch/arm/mach-omap2/serial.c | 6 ++--
arch/arm/plat-omap/include/plat/cpu.h | 13 +++++++++
arch/arm/plat-omap/include/plat/hardware.h | 2 +-
arch/arm/plat-omap/include/plat/serial.h | 14 +++++-----
.../plat-omap/include/plat/{ti816x.h => ti81xx.h} | 18 ++++++------
arch/arm/plat-omap/include/plat/uncompress.h | 8 +++---
16 files changed, 90 insertions(+), 76 deletions(-)
rename arch/arm/plat-omap/include/plat/{ti816x.h => ti81xx.h} (60%)
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index e1804bb..a34d0f7 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -76,8 +76,8 @@ config SOC_OMAP3430
default y
select ARCH_OMAP_OTG
-config SOC_OMAPTI816X
- bool "TI816X support"
+config SOC_OMAPTI81XX
+ bool "TI81XX support"
depends on ARCH_OMAP3
default y
@@ -319,7 +319,7 @@ config MACH_OMAP_3630SDP
config MACH_TI8168EVM
bool "TI8168 Evaluation Module"
- depends on SOC_OMAPTI816X
+ depends on SOC_OMAPTI81XX
default y
config MACH_OMAP_4430SDP
diff --git a/arch/arm/mach-omap2/board-ti8168evm.c b/arch/arm/mach-omap2/board-ti8168evm.c
index 8402b39..b236fcc 100644
--- a/arch/arm/mach-omap2/board-ti8168evm.c
+++ b/arch/arm/mach-omap2/board-ti8168evm.c
@@ -35,17 +35,12 @@ static void __init ti8168_evm_init(void)
omap_board_config_size = ARRAY_SIZE(ti8168_evm_config);
}
-static void __init ti8168_evm_map_io(void)
-{
- omapti816x_map_common_io();
-}
-
MACHINE_START(TI8168EVM, "ti8168evm")
/* Maintainer: Texas Instruments */
.atag_offset = 0x100,
- .map_io = ti8168_evm_map_io,
- .init_early = ti816x_init_early,
- .init_irq = ti816x_init_irq,
+ .map_io = ti81xx_map_io,
+ .init_early = ti81xx_init_early,
+ .init_irq = ti81xx_init_irq,
.timer = &omap3_timer,
.init_machine = ti8168_evm_init,
MACHINE_END
diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c
index 3d56d8a..be0fa34 100644
--- a/arch/arm/mach-omap2/clock3xxx_data.c
+++ b/arch/arm/mach-omap2/clock3xxx_data.c
@@ -3602,7 +3602,7 @@ int __init omap3xxx_clk_init(void)
* Lock DPLL5 -- here only until other device init code can
* handle this
*/
- if (!cpu_is_ti816x() && (omap_rev() >= OMAP3430_REV_ES2_0))
+ if (!cpu_is_ti81xx() && (omap_rev() >= OMAP3430_REV_ES2_0))
omap3_clk_lock_dpll5();
/* Avoid sleeping during omap3_core_dpll_m2_set_rate() */
diff --git a/arch/arm/mach-omap2/common.c b/arch/arm/mach-omap2/common.c
index c900dcb..aaf4211 100644
--- a/arch/arm/mach-omap2/common.c
+++ b/arch/arm/mach-omap2/common.c
@@ -110,27 +110,32 @@ void __init omap3_map_io(void)
/*
* Adjust TAP register base such that omap3_check_revision accesses the correct
- * TI816X register for checking device ID (it adds 0x204 to tap base while
- * TI816X DEVICE ID register is at offset 0x600 from control base).
+ * TI81XX register for checking device ID (it adds 0x204 to tap base while
+ * TI81XX DEVICE ID register is at offset 0x600 from control base).
*/
-#define TI816X_TAP_BASE (TI816X_CTRL_BASE + \
- TI816X_CONTROL_DEVICE_ID - 0x204)
+#define TI81XX_TAP_BASE (TI81XX_CTRL_BASE + \
+ TI81XX_CONTROL_DEVICE_ID - 0x204)
-static struct omap_globals ti816x_globals = {
+static struct omap_globals ti81xx_globals = {
.class = OMAP343X_CLASS,
- .tap = OMAP2_L4_IO_ADDRESS(TI816X_TAP_BASE),
- .ctrl = OMAP2_L4_IO_ADDRESS(TI816X_CTRL_BASE),
- .prm = OMAP2_L4_IO_ADDRESS(TI816X_PRCM_BASE),
- .cm = OMAP2_L4_IO_ADDRESS(TI816X_PRCM_BASE),
+ .tap = OMAP2_L4_IO_ADDRESS(TI81XX_TAP_BASE),
+ .ctrl = OMAP2_L4_IO_ADDRESS(TI81XX_CTRL_BASE),
+ .prm = OMAP2_L4_IO_ADDRESS(TI81XX_PRCM_BASE),
+ .cm = OMAP2_L4_IO_ADDRESS(TI81XX_PRCM_BASE),
};
-void __init omap2_set_globals_ti816x(void)
+void __init omap2_set_globals_ti81xx(void)
{
- __omap2_set_globals(&ti816x_globals);
+ __omap2_set_globals(&ti81xx_globals);
+}
+
+void __init ti81xx_map_io(void)
+{
+ omapti81xx_map_common_io();
}
#define AM33XX_TAP_BASE (AM33XX_CTRL_BASE + \
- TI816X_CONTROL_DEVICE_ID - 0x204)
+ TI81XX_CONTROL_DEVICE_ID - 0x204)
static struct omap_globals am33xx_globals = {
.class = AM335X_CLASS,
diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h
index fb83572..90bd2ae 100644
--- a/arch/arm/mach-omap2/common.h
+++ b/arch/arm/mach-omap2/common.h
@@ -54,10 +54,10 @@ static inline void omap34xx_map_common_io(void)
}
#endif
-#ifdef CONFIG_SOC_OMAPTI816X
-extern void omapti816x_map_common_io(void);
+#ifdef CONFIG_SOC_OMAPTI81XX
+extern void omapti81xx_map_common_io(void);
#else
-static inline void omapti816x_map_common_io(void)
+static inline void omapti81xx_map_common_io(void)
{
}
#endif
@@ -92,7 +92,7 @@ void omap35xx_init_early(void);
void omap3630_init_early(void);
void omap3_init_early(void); /* Do not use this one */
void am35xx_init_early(void);
-void ti816x_init_early(void);
+void ti81xx_init_early(void);
void omap4430_init_early(void);
/*
@@ -116,7 +116,7 @@ void omap2_set_globals_242x(void);
void omap2_set_globals_243x(void);
void omap2_set_globals_3xxx(void);
void omap2_set_globals_443x(void);
-void omap2_set_globals_ti816x(void);
+void omap2_set_globals_ti81xx(void);
void omap2_set_globals_am33xx(void);
/* These get called from omap2_set_globals_xxxx(), do not call these */
@@ -130,6 +130,7 @@ void omap243x_map_io(void);
void omap3_map_io(void);
void am33xx_map_io(void);
void omap4_map_io(void);
+void ti81xx_map_io(void);
/**
* omap_test_timeout - busy-loop, testing a condition
@@ -158,7 +159,7 @@ extern struct device *omap4_get_dsp_device(void);
void omap2_init_irq(void);
void omap3_init_irq(void);
-void ti816x_init_irq(void);
+void ti81xx_init_irq(void);
extern int omap_irq_pending(void);
void omap_intc_save_context(void);
void omap_intc_restore_context(void);
diff --git a/arch/arm/mach-omap2/control.h b/arch/arm/mach-omap2/control.h
index d4ef75d..0ba68d3 100644
--- a/arch/arm/mach-omap2/control.h
+++ b/arch/arm/mach-omap2/control.h
@@ -52,8 +52,8 @@
#define OMAP343X_CONTROL_PADCONFS_WKUP 0xa00
#define OMAP343X_CONTROL_GENERAL_WKUP 0xa60
-/* TI816X spefic control submodules */
-#define TI816X_CONTROL_DEVCONF 0x600
+/* TI81XX spefic control submodules */
+#define TI81XX_CONTROL_DEVCONF 0x600
/* Control register offsets - read/write with omap_ctrl_{read,write}{bwl}() */
@@ -244,8 +244,8 @@
#define OMAP3_PADCONF_SAD2D_MSTANDBY 0x250
#define OMAP3_PADCONF_SAD2D_IDLEACK 0x254
-/* TI816X CONTROL_DEVCONF register offsets */
-#define TI816X_CONTROL_DEVICE_ID (TI816X_CONTROL_DEVCONF + 0x000)
+/* TI81XX CONTROL_DEVCONF register offsets */
+#define TI81XX_CONTROL_DEVICE_ID (TI81XX_CONTROL_DEVCONF + 0x000)
/*
* REVISIT: This list of registers is not comprehensive - there are more
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index 439afe7..1dc68e6 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -226,7 +226,7 @@ static void __init omap4_check_features(void)
}
}
-static void __init ti816x_check_features(void)
+static void __init ti81xx_check_features(void)
{
omap_features = OMAP3_HAS_NEON;
}
@@ -489,11 +489,11 @@ void __init omap2_check_revision(void)
} else if (cpu_is_omap34xx()) {
omap3_check_revision(&cpu_rev);
- /* TI816X doesn't have feature register */
- if (!cpu_is_ti816x())
+ /* TI81XX doesn't have feature register */
+ if (!cpu_is_ti81xx())
omap3_check_features();
else
- ti816x_check_features();
+ ti81xx_check_features();
omap3_cpuinfo(cpu_rev);
return;
diff --git a/arch/arm/mach-omap2/include/mach/debug-macro.S b/arch/arm/mach-omap2/include/mach/debug-macro.S
index 13f98e5..cdfc2a1 100644
--- a/arch/arm/mach-omap2/include/mach/debug-macro.S
+++ b/arch/arm/mach-omap2/include/mach/debug-macro.S
@@ -66,11 +66,11 @@ omap_uart_lsr: .word 0
beq 34f @ configure OMAP3UART4
cmp \rp, #OMAP4UART4 @ only on 44xx
beq 44f @ configure OMAP4UART4
- cmp \rp, #TI816XUART1 @ ti816x UART offsets different
+ cmp \rp, #TI81XXUART1 @ ti81Xx UART offsets different
beq 81f @ configure UART1
- cmp \rp, #TI816XUART2 @ ti816x UART offsets different
+ cmp \rp, #TI81XXUART2 @ ti81Xx UART offsets different
beq 82f @ configure UART2
- cmp \rp, #TI816XUART3 @ ti816x UART offsets different
+ cmp \rp, #TI81XXUART3 @ ti81Xx UART offsets different
beq 83f @ configure UART3
cmp \rp, #ZOOM_UART @ only on zoom2/3
beq 95f @ configure ZOOM_UART
@@ -94,11 +94,11 @@ omap_uart_lsr: .word 0
b 98f
44: mov \rp, #UART_OFFSET(OMAP4_UART4_BASE)
b 98f
-81: mov \rp, #UART_OFFSET(TI816X_UART1_BASE)
+81: mov \rp, #UART_OFFSET(TI81XX_UART1_BASE)
b 98f
-82: mov \rp, #UART_OFFSET(TI816X_UART2_BASE)
+82: mov \rp, #UART_OFFSET(TI81XX_UART2_BASE)
b 98f
-83: mov \rp, #UART_OFFSET(TI816X_UART3_BASE)
+83: mov \rp, #UART_OFFSET(TI81XX_UART3_BASE)
b 98f
95: ldr \rp, =ZOOM_UART_BASE
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 6adca69..3f174d5 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -176,8 +176,8 @@ static struct map_desc omap34xx_io_desc[] __initdata = {
};
#endif
-#ifdef CONFIG_SOC_OMAPTI816X
-static struct map_desc omapti816x_io_desc[] __initdata = {
+#ifdef CONFIG_SOC_OMAPTI81XX
+static struct map_desc omapti81xx_io_desc[] __initdata = {
{
.virtual = L4_34XX_VIRT,
.pfn = __phys_to_pfn(L4_34XX_PHYS),
@@ -289,10 +289,10 @@ void __init omap34xx_map_common_io(void)
}
#endif
-#ifdef CONFIG_SOC_OMAPTI816X
-void __init omapti816x_map_common_io(void)
+#ifdef CONFIG_SOC_OMAPTI81XX
+void __init omapti81xx_map_common_io(void)
{
- iotable_init(omapti816x_io_desc, ARRAY_SIZE(omapti816x_io_desc));
+ iotable_init(omapti81xx_io_desc, ARRAY_SIZE(omapti81xx_io_desc));
}
#endif
@@ -451,9 +451,9 @@ void __init am35xx_init_early(void)
omap3_init_early();
}
-void __init ti816x_init_early(void)
+void __init ti81xx_init_early(void)
{
- omap2_set_globals_ti816x();
+ omap2_set_globals_ti81xx();
omap_common_init_early();
omap3xxx_voltagedomains_init();
omap3xxx_powerdomains_init();
diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c
index 42b1d65..1fef061 100644
--- a/arch/arm/mach-omap2/irq.c
+++ b/arch/arm/mach-omap2/irq.c
@@ -193,7 +193,7 @@ void __init omap3_init_irq(void)
omap_init_irq(OMAP34XX_IC_BASE, 96);
}
-void __init ti816x_init_irq(void)
+void __init ti81xx_init_irq(void)
{
omap_init_irq(OMAP34XX_IC_BASE, 128);
}
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index 9770c76..d0f009c 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -464,7 +464,7 @@ static void omap_uart_idle_init(struct omap_uart_state *uart)
mod_timer(&uart->timer, jiffies + uart->timeout);
omap_uart_smart_idle_enable(uart, 0);
- if (cpu_is_omap34xx() && !(cpu_is_ti816x() || cpu_is_am33xx())) {
+ if (cpu_is_omap34xx() && !(cpu_is_ti81xx() || cpu_is_am33xx())) {
u32 mod = (uart->num > 1) ? OMAP3430_PER_MOD : CORE_MOD;
u32 wk_mask = 0;
u32 padconf = 0;
@@ -746,7 +746,7 @@ void __init omap_serial_init_port(struct omap_board_data *bdata)
*/
uart->regshift = p->regshift;
uart->membase = p->membase;
- if (cpu_is_omap44xx() || cpu_is_ti816x())
+ if (cpu_is_omap44xx() || cpu_is_ti81xx())
uart->errata |= UART_ERRATA_FIFO_FULL_ABORT;
else if ((serial_read_reg(uart, UART_OMAP_MVER) & 0xFF)
>= UART_OMAP_NO_EMPTY_FIFO_READ_IP_REV)
@@ -828,7 +828,7 @@ void __init omap_serial_init_port(struct omap_board_data *bdata)
}
/* Enable the MDR1 errata for OMAP3 */
- if (cpu_is_omap34xx() && !(cpu_is_ti816x() || cpu_is_am33xx()))
+ if (cpu_is_omap34xx() && !(cpu_is_ti81xx() || cpu_is_am33xx()))
uart->errata |= UART_ERRATA_i202_MDR1_ACCESS;
}
diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h
index 34fc913..5f7aa49 100644
--- a/arch/arm/plat-omap/include/plat/cpu.h
+++ b/arch/arm/plat-omap/include/plat/cpu.h
@@ -87,6 +87,14 @@ static inline int is_am ##class (void) \
return (GET_AM_CLASS == (id)) ? 1 : 0; \
}
+#define GET_TI_CLASS ((omap_rev() >> 24) & 0xff)
+
+#define IS_TI_CLASS(class, id) \
+static inline int is_ti ##class (void) \
+{ \
+ return (GET_TI_CLASS == (id)) ? 1 : 0; \
+}
+
#define GET_OMAP_SUBCLASS ((omap_rev() >> 20) & 0x0fff)
#define IS_OMAP_SUBCLASS(subclass, id) \
@@ -115,6 +123,8 @@ IS_OMAP_CLASS(34xx, 0x34)
IS_OMAP_CLASS(44xx, 0x44)
IS_AM_CLASS(33xx, 0x33)
+IS_TI_CLASS(81xx, 0x81)
+
IS_OMAP_SUBCLASS(242x, 0x242)
IS_OMAP_SUBCLASS(243x, 0x243)
IS_OMAP_SUBCLASS(343x, 0x343)
@@ -134,6 +144,7 @@ IS_AM_SUBCLASS(335x, 0x335)
#define cpu_is_omap243x() 0
#define cpu_is_omap34xx() 0
#define cpu_is_omap343x() 0
+#define cpu_is_ti81xx() 0
#define cpu_is_ti816x() 0
#define cpu_is_am33xx() 0
#define cpu_is_am335x() 0
@@ -343,6 +354,7 @@ IS_OMAP_TYPE(3517, 0x3517)
# undef cpu_is_omap3530
# undef cpu_is_omap3505
# undef cpu_is_omap3517
+# undef cpu_is_ti81xx
# undef cpu_is_ti816x
# undef cpu_is_am33xx
# undef cpu_is_am335x
@@ -362,6 +374,7 @@ IS_OMAP_TYPE(3517, 0x3517)
!omap3_has_sgx())
# undef cpu_is_omap3630
# define cpu_is_omap3630() is_omap363x()
+# define cpu_is_ti81xx() is_ti81xx()
# define cpu_is_ti816x() is_ti816x()
# define cpu_is_am33xx() is_am33xx()
# define cpu_is_am335x() is_am335x()
diff --git a/arch/arm/plat-omap/include/plat/hardware.h b/arch/arm/plat-omap/include/plat/hardware.h
index e6521e1..e897978 100644
--- a/arch/arm/plat-omap/include/plat/hardware.h
+++ b/arch/arm/plat-omap/include/plat/hardware.h
@@ -286,7 +286,7 @@
#include <plat/omap24xx.h>
#include <plat/omap34xx.h>
#include <plat/omap44xx.h>
-#include <plat/ti816x.h>
+#include <plat/ti81xx.h>
#include <plat/am33xx.h>
#endif /* __ASM_ARCH_OMAP_HARDWARE_H */
diff --git a/arch/arm/plat-omap/include/plat/serial.h b/arch/arm/plat-omap/include/plat/serial.h
index 1ab9fd6..6975ee3 100644
--- a/arch/arm/plat-omap/include/plat/serial.h
+++ b/arch/arm/plat-omap/include/plat/serial.h
@@ -51,10 +51,10 @@
#define OMAP4_UART3_BASE 0x48020000
#define OMAP4_UART4_BASE 0x4806e000
-/* TI816X serial ports */
-#define TI816X_UART1_BASE 0x48020000
-#define TI816X_UART2_BASE 0x48022000
-#define TI816X_UART3_BASE 0x48024000
+/* TI81XX serial ports */
+#define TI81XX_UART1_BASE 0x48020000
+#define TI81XX_UART2_BASE 0x48022000
+#define TI81XX_UART3_BASE 0x48024000
/* AM3505/3517 UART4 */
#define AM35XX_UART4_BASE 0x4809E000 /* Only on AM3505/3517 */
@@ -89,9 +89,9 @@
#define OMAP4UART2 OMAP2UART2
#define OMAP4UART3 43
#define OMAP4UART4 44
-#define TI816XUART1 81
-#define TI816XUART2 82
-#define TI816XUART3 83
+#define TI81XXUART1 81
+#define TI81XXUART2 82
+#define TI81XXUART3 83
#define ZOOM_UART 95 /* Only on zoom2/3 */
/* This is only used by 8250.c for omap1510 */
diff --git a/arch/arm/plat-omap/include/plat/ti816x.h b/arch/arm/plat-omap/include/plat/ti81xx.h
similarity index 60%
rename from arch/arm/plat-omap/include/plat/ti816x.h
rename to arch/arm/plat-omap/include/plat/ti81xx.h
index 50510f5..8f9843f 100644
--- a/arch/arm/plat-omap/include/plat/ti816x.h
+++ b/arch/arm/plat-omap/include/plat/ti81xx.h
@@ -1,5 +1,5 @@
/*
- * This file contains the address data for various TI816X modules.
+ * This file contains the address data for various TI81XX modules.
*
* Copyright (C) 2010 Texas Instruments, Inc. - http://www.ti.com/
*
@@ -13,15 +13,15 @@
* GNU General Public License for more details.
*/
-#ifndef __ASM_ARCH_TI816X_H
-#define __ASM_ARCH_TI816X_H
+#ifndef __ASM_ARCH_TI81XX_H
+#define __ASM_ARCH_TI81XX_H
-#define L4_SLOW_TI816X_BASE 0x48000000
+#define L4_SLOW_TI81XX_BASE 0x48000000
-#define TI816X_SCM_BASE 0x48140000
-#define TI816X_CTRL_BASE TI816X_SCM_BASE
-#define TI816X_PRCM_BASE 0x48180000
+#define TI81XX_SCM_BASE 0x48140000
+#define TI81XX_CTRL_BASE TI81XX_SCM_BASE
+#define TI81XX_PRCM_BASE 0x48180000
-#define TI816X_ARM_INTC_BASE 0x48200000
+#define TI81XX_ARM_INTC_BASE 0x48200000
-#endif /* __ASM_ARCH_TI816X_H */
+#endif /* __ASM_ARCH_TI81XX_H */
diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h
index 2f472e9..7fbc361 100644
--- a/arch/arm/plat-omap/include/plat/uncompress.h
+++ b/arch/arm/plat-omap/include/plat/uncompress.h
@@ -99,9 +99,9 @@ static inline void flush(void)
#define DEBUG_LL_ZOOM(mach) \
_DEBUG_LL_ENTRY(mach, ZOOM_UART_BASE, ZOOM_PORT_SHIFT, ZOOM_UART)
-#define DEBUG_LL_TI816X(p, mach) \
- _DEBUG_LL_ENTRY(mach, TI816X_UART##p##_BASE, OMAP_PORT_SHIFT, \
- TI816XUART##p)
+#define DEBUG_LL_TI81XX(p, mach) \
+ _DEBUG_LL_ENTRY(mach, TI81XX_UART##p##_BASE, OMAP_PORT_SHIFT, \
+ TI81XXUART##p)
static inline void __arch_decomp_setup(unsigned long arch_id)
{
@@ -177,7 +177,7 @@ static inline void __arch_decomp_setup(unsigned long arch_id)
DEBUG_LL_ZOOM(omap_zoom3);
/* TI8168 base boards using UART3 */
- DEBUG_LL_TI816X(3, ti8168evm);
+ DEBUG_LL_TI81XX(3, ti8168evm);
} while (0);
}
--
1.7.0.4
^ permalink raw reply related [flat|nested] 6+ messages in thread* [PATCH RESEND v5 2/3] ARM: OMAP: TI814X: Add cpu type macros and detection support
2011-12-10 1:58 [PATCH RESEND v5 0/3] Add support for TI814X processor series Hemant Pedanekar
2011-12-10 1:58 ` [PATCH RESEND v5 1/3] ARM: OMAP: TI81XX: Prepare for addition of TI814X support Hemant Pedanekar
@ 2011-12-10 1:58 ` Hemant Pedanekar
2011-12-10 1:58 ` [PATCH RESEND v5 3/3] ARM: OMAP: TI814X: Create board support and enable build for TI8148 EVM Hemant Pedanekar
2011-12-12 18:25 ` [PATCH RESEND v5 0/3] Add support for TI814X processor series Tony Lindgren
3 siblings, 0 replies; 6+ messages in thread
From: Hemant Pedanekar @ 2011-12-10 1:58 UTC (permalink / raw)
To: linux-arm-kernel
This patch adds cpu type, macros for identification of TI814X device.
Signed-off-by: Hemant Pedanekar <hemantp@ti.com>
---
arch/arm/mach-omap2/clock3xxx_data.c | 3 +++
arch/arm/mach-omap2/id.c | 21 +++++++++++++++++++++
arch/arm/plat-omap/include/plat/clkdev_omap.h | 1 +
arch/arm/plat-omap/include/plat/clock.h | 1 +
arch/arm/plat-omap/include/plat/cpu.h | 9 +++++++++
5 files changed, 35 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c
index be0fa34..5a623a5 100644
--- a/arch/arm/mach-omap2/clock3xxx_data.c
+++ b/arch/arm/mach-omap2/clock3xxx_data.c
@@ -3519,6 +3519,9 @@ int __init omap3xxx_clk_init(void)
cpu_clkflg = CK_TI816X;
} else if (cpu_is_am33xx()) {
cpu_mask = RATE_IN_AM33XX;
+ } else if (cpu_is_ti814x()) {
+ cpu_mask = RATE_IN_TI814X;
+ cpu_clkflg = CK_TI814X;
} else if (cpu_is_omap34xx()) {
if (omap_rev() == OMAP3430_REV_ES1_0) {
cpu_mask = RATE_IN_3430ES1;
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index 1dc68e6..6c58266 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -343,6 +343,25 @@ static void __init omap3_check_revision(const char **cpu_rev)
case 0xb944:
omap_revision = AM335X_REV_ES1_0;
*cpu_rev = "1.0";
+ case 0xb8f2:
+ switch (rev) {
+ case 0:
+ /* FALLTHROUGH */
+ case 1:
+ omap_revision = TI8148_REV_ES1_0;
+ *cpu_rev = "1.0";
+ break;
+ case 2:
+ omap_revision = TI8148_REV_ES2_0;
+ *cpu_rev = "2.0";
+ break;
+ case 3:
+ /* FALLTHROUGH */
+ default:
+ omap_revision = TI8148_REV_ES2_1;
+ *cpu_rev = "2.1";
+ break;
+ }
break;
default:
/* Unknown default to latest silicon rev as default */
@@ -449,6 +468,8 @@ static void __init omap3_cpuinfo(const char *cpu_rev)
cpu_name = "TI816X";
} else if (cpu_is_am335x()) {
cpu_name = "AM335X";
+ } else if (cpu_is_ti814x()) {
+ cpu_name = "TI814X";
} else if (omap3_has_iva() && omap3_has_sgx()) {
/* OMAP3430, OMAP3525, OMAP3515, OMAP3503 devices */
cpu_name = "OMAP3430/3530";
diff --git a/arch/arm/plat-omap/include/plat/clkdev_omap.h b/arch/arm/plat-omap/include/plat/clkdev_omap.h
index 387a963..3c50ec8 100644
--- a/arch/arm/plat-omap/include/plat/clkdev_omap.h
+++ b/arch/arm/plat-omap/include/plat/clkdev_omap.h
@@ -40,6 +40,7 @@ struct omap_clk {
#define CK_443X (1 << 11)
#define CK_TI816X (1 << 12)
#define CK_446X (1 << 13)
+#define CK_TI814X (1 << 14)
#define CK_34XX (CK_3430ES1 | CK_3430ES2PLUS)
diff --git a/arch/arm/plat-omap/include/plat/clock.h b/arch/arm/plat-omap/include/plat/clock.h
index bb3e423..240a7b9 100644
--- a/arch/arm/plat-omap/include/plat/clock.h
+++ b/arch/arm/plat-omap/include/plat/clock.h
@@ -60,6 +60,7 @@ struct clkops {
#define RATE_IN_TI816X (1 << 6)
#define RATE_IN_4460 (1 << 7)
#define RATE_IN_AM33XX (1 << 8)
+#define RATE_IN_TI814X (1 << 9)
#define RATE_IN_24XX (RATE_IN_242X | RATE_IN_243X)
#define RATE_IN_34XX (RATE_IN_3430ES1 | RATE_IN_3430ES2PLUS)
diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h
index 5f7aa49..6b51086 100644
--- a/arch/arm/plat-omap/include/plat/cpu.h
+++ b/arch/arm/plat-omap/include/plat/cpu.h
@@ -134,6 +134,7 @@ IS_OMAP_SUBCLASS(446x, 0x446)
IS_OMAP_SUBCLASS(447x, 0x447)
IS_TI_SUBCLASS(816x, 0x816)
+IS_TI_SUBCLASS(814x, 0x814)
IS_AM_SUBCLASS(335x, 0x335)
#define cpu_is_omap7xx() 0
@@ -146,6 +147,7 @@ IS_AM_SUBCLASS(335x, 0x335)
#define cpu_is_omap343x() 0
#define cpu_is_ti81xx() 0
#define cpu_is_ti816x() 0
+#define cpu_is_ti814x() 0
#define cpu_is_am33xx() 0
#define cpu_is_am335x() 0
#define cpu_is_omap44xx() 0
@@ -356,6 +358,7 @@ IS_OMAP_TYPE(3517, 0x3517)
# undef cpu_is_omap3517
# undef cpu_is_ti81xx
# undef cpu_is_ti816x
+# undef cpu_is_ti814x
# undef cpu_is_am33xx
# undef cpu_is_am335x
# define cpu_is_omap3430() is_omap3430()
@@ -376,6 +379,7 @@ IS_OMAP_TYPE(3517, 0x3517)
# define cpu_is_omap3630() is_omap363x()
# define cpu_is_ti81xx() is_ti81xx()
# define cpu_is_ti816x() is_ti816x()
+# define cpu_is_ti814x() is_ti814x()
# define cpu_is_am33xx() is_am33xx()
# define cpu_is_am335x() is_am335x()
#endif
@@ -426,6 +430,11 @@ IS_OMAP_TYPE(3517, 0x3517)
#define TI8168_REV_ES1_0 TI816X_CLASS
#define TI8168_REV_ES1_1 (TI816X_CLASS | (0x1 << 8))
+#define TI814X_CLASS 0x81400034
+#define TI8148_REV_ES1_0 TI814X_CLASS
+#define TI8148_REV_ES2_0 (TI814X_CLASS | (0x1 << 8))
+#define TI8148_REV_ES2_1 (TI814X_CLASS | (0x2 << 8))
+
#define AM335X_CLASS 0x33500034
#define AM335X_REV_ES1_0 AM335X_CLASS
--
1.7.0.4
^ permalink raw reply related [flat|nested] 6+ messages in thread* [PATCH RESEND v5 3/3] ARM: OMAP: TI814X: Create board support and enable build for TI8148 EVM
2011-12-10 1:58 [PATCH RESEND v5 0/3] Add support for TI814X processor series Hemant Pedanekar
2011-12-10 1:58 ` [PATCH RESEND v5 1/3] ARM: OMAP: TI81XX: Prepare for addition of TI814X support Hemant Pedanekar
2011-12-10 1:58 ` [PATCH RESEND v5 2/3] ARM: OMAP: TI814X: Add cpu type macros and detection support Hemant Pedanekar
@ 2011-12-10 1:58 ` Hemant Pedanekar
2011-12-12 18:25 ` [PATCH RESEND v5 0/3] Add support for TI814X processor series Tony Lindgren
3 siblings, 0 replies; 6+ messages in thread
From: Hemant Pedanekar @ 2011-12-10 1:58 UTC (permalink / raw)
To: linux-arm-kernel
This patch adds minimal support and build configuration for TI8148 EVM. Also
adds support for low level debugging on UART1 console on the EVM.
Note that existing TI8168 EVM file (board-ti8168evm.c) is updated with machine
info for TI8148 EVM.
Signed-off-by: Hemant Pedanekar <hemantp@ti.com>
---
arch/arm/mach-omap2/Kconfig | 5 +++++
arch/arm/mach-omap2/Makefile | 1 +
arch/arm/mach-omap2/board-ti8168evm.c | 22 ++++++++++++++++------
arch/arm/plat-omap/include/plat/uncompress.h | 3 +++
4 files changed, 25 insertions(+), 6 deletions(-)
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index a34d0f7..cb760ac 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -322,6 +322,11 @@ config MACH_TI8168EVM
depends on SOC_OMAPTI81XX
default y
+config MACH_TI8148EVM
+ bool "TI8148 Evaluation Module"
+ depends on SOC_OMAPTI81XX
+ default y
+
config MACH_OMAP_4430SDP
bool "OMAP 4430 SDP board"
default y
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 9a6da52..b9e0990 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -236,6 +236,7 @@ obj-$(CONFIG_MACH_CRANEBOARD) += board-am3517crane.o
obj-$(CONFIG_MACH_SBC3530) += board-omap3stalker.o
obj-$(CONFIG_MACH_TI8168EVM) += board-ti8168evm.o
+obj-$(CONFIG_MACH_TI8148EVM) += board-ti8168evm.o
# Platform specific device init code
diff --git a/arch/arm/mach-omap2/board-ti8168evm.c b/arch/arm/mach-omap2/board-ti8168evm.c
index b236fcc..b3ca997 100644
--- a/arch/arm/mach-omap2/board-ti8168evm.c
+++ b/arch/arm/mach-omap2/board-ti8168evm.c
@@ -1,5 +1,5 @@
/*
- * Code for TI8168 EVM.
+ * Code for TI8168/TI8148 EVM.
*
* Copyright (C) 2010 Texas Instruments, Inc. - http://www.ti.com/
*
@@ -24,15 +24,15 @@
#include <plat/board.h>
#include "common.h"
-static struct omap_board_config_kernel ti8168_evm_config[] __initdata = {
+static struct omap_board_config_kernel ti81xx_evm_config[] __initdata = {
};
-static void __init ti8168_evm_init(void)
+static void __init ti81xx_evm_init(void)
{
omap_serial_init();
omap_sdrc_init(NULL, NULL);
- omap_board_config = ti8168_evm_config;
- omap_board_config_size = ARRAY_SIZE(ti8168_evm_config);
+ omap_board_config = ti81xx_evm_config;
+ omap_board_config_size = ARRAY_SIZE(ti81xx_evm_config);
}
MACHINE_START(TI8168EVM, "ti8168evm")
@@ -42,5 +42,15 @@ MACHINE_START(TI8168EVM, "ti8168evm")
.init_early = ti81xx_init_early,
.init_irq = ti81xx_init_irq,
.timer = &omap3_timer,
- .init_machine = ti8168_evm_init,
+ .init_machine = ti81xx_evm_init,
+MACHINE_END
+
+MACHINE_START(TI8148EVM, "ti8148evm")
+ /* Maintainer: Texas Instruments */
+ .atag_offset = 0x100,
+ .map_io = ti81xx_map_io,
+ .init_early = ti81xx_init_early,
+ .init_irq = ti81xx_init_irq,
+ .timer = &omap3_timer,
+ .init_machine = ti81xx_evm_init,
MACHINE_END
diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h
index 7fbc361..6ee9049 100644
--- a/arch/arm/plat-omap/include/plat/uncompress.h
+++ b/arch/arm/plat-omap/include/plat/uncompress.h
@@ -179,6 +179,9 @@ static inline void __arch_decomp_setup(unsigned long arch_id)
/* TI8168 base boards using UART3 */
DEBUG_LL_TI81XX(3, ti8168evm);
+ /* TI8148 base boards using UART1 */
+ DEBUG_LL_TI81XX(1, ti8148evm);
+
} while (0);
}
--
1.7.0.4
^ permalink raw reply related [flat|nested] 6+ messages in thread