linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: jean.pihet@newoldbits.com (jean.pihet at newoldbits.com)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 6/6] OMAP3: powerdomain data: add wake-up latency figures
Date: Wed, 14 Dec 2011 15:51:44 +0100	[thread overview]
Message-ID: <1323874304-5001-7-git-send-email-j-pihet@ti.com> (raw)
In-Reply-To: <1323874304-5001-1-git-send-email-j-pihet@ti.com>

From: Jean Pihet <j-pihet@ti.com>

Figures are added to the power domains structs for RET and OFF modes.

Note: the latency figures for MPU, PER, CORE, NEON have been obtained
from actual measurements.
The latency figures for the other power domains are preliminary and
shall be added.

Cf. http://www.omappedia.org/wiki/Power_Management_Device_Latencies_Measurement
for a detailed explanation on where are the numbers coming from.

Tested on OMAP3 Beagleboard in RET/OFF using wake-up latency constraints
on MPU, CORE and PER.

Signed-off-by: Jean Pihet <j-pihet@ti.com>
Reviewed-by: Kevin Hilman <khilman@ti.com>
---
 arch/arm/mach-omap2/powerdomains3xxx_data.c |   83 +++++++++++++++++++++++++++
 1 files changed, 83 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-omap2/powerdomains3xxx_data.c b/arch/arm/mach-omap2/powerdomains3xxx_data.c
index 8ef26da..63a3afd 100644
--- a/arch/arm/mach-omap2/powerdomains3xxx_data.c
+++ b/arch/arm/mach-omap2/powerdomains3xxx_data.c
@@ -31,6 +31,19 @@
 
 /*
  * Powerdomains
+ *
+ * The wakeup_lat values are derived from HW and SW measurements on
+ * the actual target. For more details cf.
+ * http://www.omappedia.org/wiki/Power_Management_Device_Latencies_Measurement#Results_for_individual_power_domains
+ *
+ * Note: the latency figures for MPU, PER, CORE, NEON have been obtained
+ * from actual measurements.
+ * The latency figures for the other power domains are preliminary and
+ * shall be added.
+ *
+ * Note: only the SW restore timing values are taken into account.
+ * The HW impact of the sys_clkreq and sys_offmode signals is not taken
+ * into account - TDB
  */
 
 static struct powerdomain iva2_pwrdm = {
@@ -51,6 +64,13 @@ static struct powerdomain iva2_pwrdm = {
 		[2] = PWRSTS_OFF_ON,
 		[3] = PWRSTS_ON,
 	},
+	.wakeup_lat = {
+		[PWRDM_FUNC_PWRST_OFF] = 1100,
+		[PWRDM_FUNC_PWRST_OSWR] = UNSUP_STATE,
+		[PWRDM_FUNC_PWRST_CSWR] = 350,
+		[PWRDM_FUNC_PWRST_INACTIVE] = UNSUP_STATE,
+		[PWRDM_FUNC_PWRST_ON] = 0,
+	},
 	.voltdm           = { .name = "mpu_iva" },
 };
 
@@ -67,6 +87,13 @@ static struct powerdomain mpu_3xxx_pwrdm = {
 	.pwrsts_mem_on	  = {
 		[0] = PWRSTS_OFF_ON,
 	},
+	.wakeup_lat = {
+		[PWRDM_FUNC_PWRST_OFF] = 1830,
+		[PWRDM_FUNC_PWRST_OSWR] = UNSUP_STATE,
+		[PWRDM_FUNC_PWRST_CSWR] = 121,
+		[PWRDM_FUNC_PWRST_INACTIVE] = UNSUP_STATE,
+		[PWRDM_FUNC_PWRST_ON] = 0,
+	},
 	.voltdm           = { .name = "mpu_iva" },
 };
 
@@ -94,6 +121,13 @@ static struct powerdomain core_3xxx_pre_es3_1_pwrdm = {
 		[0] = PWRSTS_OFF_RET_ON, /* MEM1ONSTATE */
 		[1] = PWRSTS_OFF_RET_ON, /* MEM2ONSTATE */
 	},
+	.wakeup_lat = {
+		[PWRDM_FUNC_PWRST_OFF] = 3082,
+		[PWRDM_FUNC_PWRST_OSWR] = UNSUP_STATE,
+		[PWRDM_FUNC_PWRST_CSWR] = 153,
+		[PWRDM_FUNC_PWRST_INACTIVE] = UNSUP_STATE,
+		[PWRDM_FUNC_PWRST_ON] = 0,
+	},
 	.voltdm           = { .name = "core" },
 };
 
@@ -116,6 +150,13 @@ static struct powerdomain core_3xxx_es3_1_pwrdm = {
 		[0] = PWRSTS_OFF_RET_ON, /* MEM1ONSTATE */
 		[1] = PWRSTS_OFF_RET_ON, /* MEM2ONSTATE */
 	},
+	.wakeup_lat = {
+		[PWRDM_FUNC_PWRST_OFF] = 3082,
+		[PWRDM_FUNC_PWRST_OSWR] = UNSUP_STATE,
+		[PWRDM_FUNC_PWRST_CSWR] = 153,
+		[PWRDM_FUNC_PWRST_INACTIVE] = UNSUP_STATE,
+		[PWRDM_FUNC_PWRST_ON] = 0,
+	},
 	.voltdm           = { .name = "core" },
 };
 
@@ -131,6 +172,13 @@ static struct powerdomain dss_pwrdm = {
 	.pwrsts_mem_on	  = {
 		[0] = PWRSTS_ON,  /* MEMONSTATE */
 	},
+	.wakeup_lat = {
+		[PWRDM_FUNC_PWRST_OFF] = 70,
+		[PWRDM_FUNC_PWRST_OSWR] = UNSUP_STATE,
+		[PWRDM_FUNC_PWRST_CSWR] = 20,
+		[PWRDM_FUNC_PWRST_INACTIVE] = UNSUP_STATE,
+		[PWRDM_FUNC_PWRST_ON] = 0,
+	},
 	.voltdm           = { .name = "core" },
 };
 
@@ -152,6 +200,13 @@ static struct powerdomain sgx_pwrdm = {
 	.pwrsts_mem_on	  = {
 		[0] = PWRSTS_ON,  /* MEMONSTATE */
 	},
+	.wakeup_lat = {
+		[PWRDM_FUNC_PWRST_OFF] = 1000,
+		[PWRDM_FUNC_PWRST_OSWR] = UNSUP_STATE,
+		[PWRDM_FUNC_PWRST_CSWR] = UNSUP_STATE,
+		[PWRDM_FUNC_PWRST_INACTIVE] = UNSUP_STATE,
+		[PWRDM_FUNC_PWRST_ON] = 0,
+	},
 	.voltdm           = { .name = "core" },
 };
 
@@ -167,6 +222,13 @@ static struct powerdomain cam_pwrdm = {
 	.pwrsts_mem_on	  = {
 		[0] = PWRSTS_ON,  /* MEMONSTATE */
 	},
+	.wakeup_lat = {
+		[PWRDM_FUNC_PWRST_OFF] = 850,
+		[PWRDM_FUNC_PWRST_OSWR] = UNSUP_STATE,
+		[PWRDM_FUNC_PWRST_CSWR] = 35,
+		[PWRDM_FUNC_PWRST_INACTIVE] = UNSUP_STATE,
+		[PWRDM_FUNC_PWRST_ON] = 0,
+	},
 	.voltdm           = { .name = "core" },
 };
 
@@ -182,6 +244,13 @@ static struct powerdomain per_pwrdm = {
 	.pwrsts_mem_on	  = {
 		[0] = PWRSTS_ON,  /* MEMONSTATE */
 	},
+	.wakeup_lat = {
+		[PWRDM_FUNC_PWRST_OFF] = 671,
+		[PWRDM_FUNC_PWRST_OSWR] = UNSUP_STATE,
+		[PWRDM_FUNC_PWRST_CSWR] = 31,
+		[PWRDM_FUNC_PWRST_INACTIVE] = UNSUP_STATE,
+		[PWRDM_FUNC_PWRST_ON] = 0,
+	},
 	.voltdm           = { .name = "core" },
 };
 
@@ -196,6 +265,13 @@ static struct powerdomain neon_pwrdm = {
 	.prcm_offs	  = OMAP3430_NEON_MOD,
 	.pwrsts		  = PWRSTS_OFF_RET_ON,
 	.pwrsts_logic_ret = PWRSTS_RET,
+	.wakeup_lat = {
+		[PWRDM_FUNC_PWRST_OFF] = 0,
+		[PWRDM_FUNC_PWRST_OSWR] = UNSUP_STATE,
+		[PWRDM_FUNC_PWRST_CSWR] = 0,
+		[PWRDM_FUNC_PWRST_INACTIVE] = UNSUP_STATE,
+		[PWRDM_FUNC_PWRST_ON] = 0,
+	},
 	.voltdm           = { .name = "mpu_iva" },
 };
 
@@ -218,6 +294,13 @@ static struct powerdomain usbhost_pwrdm = {
 	.pwrsts_mem_on	  = {
 		[0] = PWRSTS_ON,  /* MEMONSTATE */
 	},
+	.wakeup_lat = {
+		[PWRDM_FUNC_PWRST_OFF] = 800,
+		[PWRDM_FUNC_PWRST_OSWR] = UNSUP_STATE,
+		[PWRDM_FUNC_PWRST_CSWR] = 150,
+		[PWRDM_FUNC_PWRST_INACTIVE] = UNSUP_STATE,
+		[PWRDM_FUNC_PWRST_ON] = 0,
+	},
 	.voltdm           = { .name = "core" },
 };
 
-- 
1.7.5.4

  parent reply	other threads:[~2011-12-14 14:51 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-12-14 14:51 [PATCH v6 0/6] PM QoS: implement the OMAP low level constraints management code jean.pihet at newoldbits.com
2011-12-14 14:51 ` [PATCH 1/6] OMAP2+: powerdomain: control power domains next state jean.pihet at newoldbits.com
2011-12-14 14:51 ` [PATCH 2/6] OMAP2+: omap_hwmod: manage the wake-up latency constraints jean.pihet at newoldbits.com
2011-12-19 21:11   ` Paul Walmsley
2011-12-14 14:51 ` [PATCH 3/6] OMAP: PM: register to the per-device PM QoS framework jean.pihet at newoldbits.com
2011-12-19 21:12   ` Paul Walmsley
2011-12-14 14:51 ` [PATCH 4/6] OMAP3: cpuidle: next C-state decision depends on the PM QoS MPU and CORE constraints jean.pihet at newoldbits.com
2011-12-14 14:51 ` [PATCH 5/6] OMAP3: update cpuidle latency and threshold figures jean.pihet at newoldbits.com
2011-12-14 14:51 ` jean.pihet at newoldbits.com [this message]
2011-12-19 21:02 ` [PATCH v6 0/6] PM QoS: implement the OMAP low level constraints management code Paul Walmsley
2012-01-16 19:57   ` Jean Pihet
2012-01-16 20:04     ` Paul Walmsley
2012-01-16 20:22       ` Jean Pihet
2012-01-16 20:08     ` Paul Walmsley
  -- strict thread matches above, loose matches on Subject: below --
2011-12-12 16:18 [PATCH v5 " jean.pihet at newoldbits.com
2011-12-12 16:18 ` [PATCH 6/6] OMAP3: powerdomain data: add wake-up latency figures jean.pihet at newoldbits.com

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1323874304-5001-7-git-send-email-j-pihet@ti.com \
    --to=jean.pihet@newoldbits.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).