From: robherring2@gmail.com (Rob Herring)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 9/9] ARM: highbank: add interrupt properties to gpio nodes
Date: Wed, 14 Dec 2011 09:28:58 -0600 [thread overview]
Message-ID: <1323876538-20406-10-git-send-email-robherring2@gmail.com> (raw)
In-Reply-To: <1323876538-20406-1-git-send-email-robherring2@gmail.com>
From: Rob Herring <rob.herring@calxeda.com>
Add interrupt-controller properties to pl061 gpio nodes so gpio lines can
function as interrupts.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
---
arch/arm/boot/dts/highbank.dts | 9 ++++++++-
1 files changed, 8 insertions(+), 1 deletions(-)
diff --git a/arch/arm/boot/dts/highbank.dts b/arch/arm/boot/dts/highbank.dts
index aeb1a75..dfe2b49 100644
--- a/arch/arm/boot/dts/highbank.dts
+++ b/arch/arm/boot/dts/highbank.dts
@@ -89,7 +89,6 @@
#size-cells = <0>;
#address-cells = <1>;
interrupt-controller;
- interrupt-parent;
reg = <0xfff11000 0x1000>,
<0xfff10100 0x100>;
};
@@ -129,6 +128,8 @@
#gpio-cells = <2>;
compatible = "arm,pl061", "arm,primecell";
gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
reg = <0xfff30000 0x1000>;
interrupts = <0 14 4>;
};
@@ -137,6 +138,8 @@
#gpio-cells = <2>;
compatible = "arm,pl061", "arm,primecell";
gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
reg = <0xfff31000 0x1000>;
interrupts = <0 15 4>;
};
@@ -145,6 +148,8 @@
#gpio-cells = <2>;
compatible = "arm,pl061", "arm,primecell";
gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
reg = <0xfff32000 0x1000>;
interrupts = <0 16 4>;
};
@@ -153,6 +158,8 @@
#gpio-cells = <2>;
compatible = "arm,pl061", "arm,primecell";
gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
reg = <0xfff33000 0x1000>;
interrupts = <0 17 4>;
};
--
1.7.5.4
next prev parent reply other threads:[~2011-12-14 15:28 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-12-14 15:28 [PATCH 0/9] irq domain for gen irq chip and pl061 DT irq support Rob Herring
2011-12-14 15:28 ` [PATCH 1/9] dt: add empty of_get_node/of_put_node functions Rob Herring
2011-12-14 16:02 ` Grant Likely
2011-12-14 15:28 ` [PATCH 2/9] irq: check domain hwirq range for DT translate Rob Herring
2011-12-14 16:08 ` Grant Likely
2011-12-15 5:23 ` Shawn Guo
2011-12-19 12:41 ` Cousson, Benoit
2011-12-19 14:23 ` Rob Herring
2011-12-19 15:21 ` Cousson, Benoit
2011-12-14 15:28 ` [PATCH 3/9] irq: convert generic-chip to use irq_domain Rob Herring
2011-12-14 21:14 ` Grant Likely
2011-12-14 21:23 ` Rob Herring
2011-12-14 21:26 ` Grant Likely
2011-12-14 23:29 ` Rob Herring
2011-12-15 5:25 ` Shawn Guo
2011-12-15 5:55 ` Shawn Guo
2011-12-15 13:39 ` Rob Herring
2011-12-15 13:56 ` Rob Herring
2011-12-15 14:15 ` Shawn Guo
2011-12-15 14:46 ` Shawn Guo
2011-12-15 15:55 ` Grant Likely
2011-12-15 16:17 ` Rob Herring
2011-12-15 16:39 ` Grant Likely
2011-12-15 14:08 ` Shawn Guo
2011-12-15 14:01 ` Rob Herring
2011-12-14 15:28 ` [PATCH 4/9] gpio: pl061: use chained_irq_* functions in irq handler Rob Herring
2011-12-14 21:15 ` Grant Likely
2011-12-14 15:28 ` [PATCH 5/9] gpio: pl061: convert to use 0 for no irq Rob Herring
2011-12-14 21:16 ` Grant Likely
2011-12-14 15:28 ` [PATCH 6/9] ARM: realview: convert pl061 no irq to 0 instead of -1 Rob Herring
2011-12-14 21:16 ` Grant Likely
2011-12-14 15:28 ` [PATCH 7/9] gpio: pl061: convert to use generic irq chip Rob Herring
2011-12-14 21:17 ` Grant Likely
2011-12-19 20:52 ` [PATCH v2] " Rob Herring
2011-12-24 23:26 ` Linus Walleij
2012-01-02 8:54 ` Grant Likely
2012-01-02 16:54 ` Rob Herring
2011-12-14 15:28 ` [PATCH 8/9] gpio: pl061: enable interrupts with DT style binding Rob Herring
2011-12-14 21:39 ` Grant Likely
2011-12-19 20:54 ` [PATCH v2] " Rob Herring
2011-12-14 15:28 ` Rob Herring [this message]
2011-12-14 21:39 ` [PATCH 9/9] ARM: highbank: add interrupt properties to gpio nodes Grant Likely
2011-12-14 15:41 ` [PATCH 0/9] irq domain for gen irq chip and pl061 DT irq support Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1323876538-20406-10-git-send-email-robherring2@gmail.com \
--to=robherring2@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).