From: manjunath.hadli@ti.com (Manjunath Hadli)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v6 08/11] davinci: dm644x: change vpfe capture structure variables for consistency
Date: Thu, 15 Dec 2011 17:41:57 +0530 [thread overview]
Message-ID: <1323951120-15876-9-git-send-email-manjunath.hadli@ti.com> (raw)
In-Reply-To: <1323951120-15876-1-git-send-email-manjunath.hadli@ti.com>
Add SoC and board prefixes to variable names so that it is
consistent with the rest of the file.
Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com>
Acked-by: Sekhar Nori <nsekhar@ti.com>
---
arch/arm/mach-davinci/board-dm644x-evm.c | 24 ++++++++++++------------
arch/arm/mach-davinci/dm644x.c | 12 ++++++------
2 files changed, 18 insertions(+), 18 deletions(-)
diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index 00e8599..fbd3856 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -189,7 +189,7 @@ static struct platform_device davinci_fb_device = {
.num_resources = 0,
};
-static struct tvp514x_platform_data tvp5146_pdata = {
+static struct tvp514x_platform_data dm644xevm_tvp5146_pdata = {
.clk_polarity = 0,
.hs_polarity = 1,
.vs_polarity = 1
@@ -197,7 +197,7 @@ static struct tvp514x_platform_data tvp5146_pdata = {
#define TVP514X_STD_ALL (V4L2_STD_NTSC | V4L2_STD_PAL)
/* Inputs available at the TVP5146 */
-static struct v4l2_input tvp5146_inputs[] = {
+static struct v4l2_input dm644xevm_tvp5146_inputs[] = {
{
.index = 0,
.name = "Composite",
@@ -217,7 +217,7 @@ static struct v4l2_input tvp5146_inputs[] = {
* ouput that goes to vpfe. There is a one to one correspondence
* with tvp5146_inputs
*/
-static struct vpfe_route tvp5146_routes[] = {
+static struct vpfe_route dm644xevm_tvp5146_routes[] = {
{
.input = INPUT_CVBS_VI2B,
.output = OUTPUT_10BIT_422_EMBEDDED_SYNC,
@@ -228,13 +228,13 @@ static struct vpfe_route tvp5146_routes[] = {
},
};
-static struct vpfe_subdev_info vpfe_sub_devs[] = {
+static struct vpfe_subdev_info dm644xevm_vpfe_sub_devs[] = {
{
.name = "tvp5146",
.grp_id = 0,
- .num_inputs = ARRAY_SIZE(tvp5146_inputs),
- .inputs = tvp5146_inputs,
- .routes = tvp5146_routes,
+ .num_inputs = ARRAY_SIZE(dm644xevm_tvp5146_inputs),
+ .inputs = dm644xevm_tvp5146_inputs,
+ .routes = dm644xevm_tvp5146_routes,
.can_route = 1,
.ccdc_if_params = {
.if_type = VPFE_BT656,
@@ -243,15 +243,15 @@ static struct vpfe_subdev_info vpfe_sub_devs[] = {
},
.board_info = {
I2C_BOARD_INFO("tvp5146", 0x5d),
- .platform_data = &tvp5146_pdata,
+ .platform_data = &dm644xevm_tvp5146_pdata,
},
},
};
-static struct vpfe_config vpfe_cfg = {
- .num_subdevs = ARRAY_SIZE(vpfe_sub_devs),
+static struct vpfe_config dm644xevm_capture_cfg = {
+ .num_subdevs = ARRAY_SIZE(dm644xevm_vpfe_sub_devs),
.i2c_adapter_id = 1,
- .sub_devs = vpfe_sub_devs,
+ .sub_devs = dm644xevm_vpfe_sub_devs,
.card_name = "DM6446 EVM",
.ccdc = "DM6446 CCDC",
};
@@ -625,7 +625,7 @@ static void __init
davinci_evm_map_io(void)
{
/* setup input configuration for VPFE input devices */
- dm644x_set_vpfe_config(&vpfe_cfg);
+ dm644x_set_vpfe_config(&dm644xevm_capture_cfg);
dm644x_init();
}
diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c
index 39d1332..7144277 100644
--- a/arch/arm/mach-davinci/dm644x.c
+++ b/arch/arm/mach-davinci/dm644x.c
@@ -614,7 +614,7 @@ static struct platform_device dm644x_vpss_device = {
.resource = dm644x_vpss_resources,
};
-static struct resource vpfe_resources[] = {
+static struct resource dm644x_vpfe_resources[] = {
{
.start = IRQ_VDINT0,
.end = IRQ_VDINT0,
@@ -648,11 +648,11 @@ static struct platform_device dm644x_ccdc_dev = {
},
};
-static struct platform_device vpfe_capture_dev = {
+static struct platform_device dm644x_vpfe_dev = {
.name = CAPTURE_DRV_NAME,
.id = -1,
- .num_resources = ARRAY_SIZE(vpfe_resources),
- .resource = vpfe_resources,
+ .num_resources = ARRAY_SIZE(dm644x_vpfe_resources),
+ .resource = dm644x_vpfe_resources,
.dev = {
.dma_mask = &vpfe_capture_dma_mask,
.coherent_dma_mask = DMA_BIT_MASK(32),
@@ -661,7 +661,7 @@ static struct platform_device vpfe_capture_dev = {
void dm644x_set_vpfe_config(struct vpfe_config *cfg)
{
- vpfe_capture_dev.dev.platform_data = cfg;
+ dm644x_vpfe_dev.dev.platform_data = cfg;
}
/*----------------------------------------------------------------------*/
@@ -809,7 +809,7 @@ static int __init dm644x_init_devices(void)
platform_device_register(&dm644x_vpss_device);
platform_device_register(&dm644x_ccdc_dev);
- platform_device_register(&vpfe_capture_dev);
+ platform_device_register(&dm644x_vpfe_dev);
return 0;
}
--
1.6.2.4
next prev parent reply other threads:[~2011-12-15 12:11 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-12-15 12:11 [PATCH v6 00/11] ARM: davinci:add support for dm644x vpbe display driver Manjunath Hadli
2011-12-15 12:11 ` [PATCH v6 01/11] davinci: vpif: remove obsolete header file inclusion Manjunath Hadli
2011-12-16 14:22 ` Hadli, Manjunath
2011-12-19 20:02 ` Nori, Sekhar
2011-12-15 12:11 ` [PATCH v6 02/11] ARM: davinci: dm644x: remove the macros from the header to move to c file Manjunath Hadli
2011-12-20 6:30 ` Nori, Sekhar
2011-12-15 12:11 ` [PATCH v6 03/11] ARM: davinci: dm365: " Manjunath Hadli
2011-12-20 9:02 ` Nori, Sekhar
2011-12-15 12:11 ` [PATCH v6 04/11] ARM: davinci: dm646x: " Manjunath Hadli
2011-12-20 13:19 ` Nori, Sekhar
2011-12-15 12:11 ` [PATCH v6 05/11] ARM: davinci: create new common platform header for davinci Manjunath Hadli
2011-12-20 19:15 ` Nori, Sekhar
2011-12-21 7:29 ` Hadli, Manjunath
2011-12-15 12:11 ` [PATCH v6 06/11] davinci: eliminate use of IO_ADDRESS() on sysmod Manjunath Hadli
2011-12-15 12:11 ` [PATCH v6 07/11] davinci: dm644x: Replace register base value with a defined macro Manjunath Hadli
2011-12-15 12:11 ` Manjunath Hadli [this message]
2011-12-15 12:11 ` [PATCH v6 09/11] davinci: dm644x: move vpfe init from soc to board specific files Manjunath Hadli
2011-12-15 12:11 ` [PATCH v6 10/11] davinci: dm644x: add support for v4l2 video display Manjunath Hadli
2011-12-15 12:12 ` [PATCH v6 11/11] davinci: dm644x EVM: add support for VPBE display Manjunath Hadli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1323951120-15876-9-git-send-email-manjunath.hadli@ti.com \
--to=manjunath.hadli@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).