From: shawn.guo@linaro.org (Shawn Guo)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 09/12] video: mxsfb: convert to clk_prepare/clk_unprepare
Date: Tue, 20 Dec 2011 20:00:40 +0800 [thread overview]
Message-ID: <1324382443-4439-10-git-send-email-shawn.guo@linaro.org> (raw)
In-Reply-To: <1324382443-4439-1-git-send-email-shawn.guo@linaro.org>
The patch converts mxsfb driver to clk_prepare/clk_unprepare by
using helper functions clk_prepare_enable/clk_disable_unprepare.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
---
drivers/video/mxsfb.c | 8 ++++----
1 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/video/mxsfb.c b/drivers/video/mxsfb.c
index d837d63..eb3c5ee 100644
--- a/drivers/video/mxsfb.c
+++ b/drivers/video/mxsfb.c
@@ -328,7 +328,7 @@ static void mxsfb_enable_controller(struct fb_info *fb_info)
dev_dbg(&host->pdev->dev, "%s\n", __func__);
- clk_enable(host->clk);
+ clk_prepare_enable(host->clk);
clk_set_rate(host->clk, PICOS2KHZ(fb_info->var.pixclock) * 1000U);
/* if it was disabled, re-enable the mode again */
@@ -368,7 +368,7 @@ static void mxsfb_disable_controller(struct fb_info *fb_info)
writel(VDCTRL4_SYNC_SIGNALS_ON, host->base + LCDC_VDCTRL4 + REG_CLR);
- clk_disable(host->clk);
+ clk_disable_unprepare(host->clk);
host->enabled = 0;
}
@@ -668,7 +668,7 @@ static int __devinit mxsfb_restore_mode(struct mxsfb_info *host)
line_count = fb_info->fix.smem_len / fb_info->fix.line_length;
fb_info->fix.ypanstep = 1;
- clk_enable(host->clk);
+ clk_prepare_enable(host->clk);
host->enabled = 1;
return 0;
@@ -841,7 +841,7 @@ static int __devinit mxsfb_probe(struct platform_device *pdev)
error_register:
if (host->enabled)
- clk_disable(host->clk);
+ clk_disable_unprepare(host->clk);
fb_destroy_modelist(&fb_info->modelist);
error_init_fb:
kfree(fb_info->pseudo_palette);
--
1.7.4.1
next prev parent reply other threads:[~2011-12-20 12:00 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-12-20 12:00 [PATCH 0/12] Add clk_prepare/clk_unprepare for mxs clock api Shawn Guo
2011-12-20 12:00 ` [PATCH 01/12] clk: add helper functions clk_prepare_enable and clk_disable_unprepare Shawn Guo
2011-12-20 13:48 ` Marek Vasut
2011-12-20 14:09 ` Shawn Guo
2011-12-20 12:00 ` [PATCH 02/12] arm/mxs: convert platform code to clk_prepare/clk_unprepare Shawn Guo
2011-12-20 13:44 ` Marek Vasut
2011-12-20 21:11 ` Russell King - ARM Linux
2011-12-20 21:28 ` Marek Vasut
2011-12-20 12:00 ` [PATCH 03/12] net: fec: add clk_prepare/clk_unprepare Shawn Guo
2011-12-20 13:45 ` Marek Vasut
2011-12-20 12:00 ` [PATCH 04/12] dma: mxs-dma: convert to clk_prepare/clk_unprepare Shawn Guo
2011-12-20 13:45 ` Marek Vasut
2011-12-23 17:35 ` Vinod Koul
2011-12-20 12:00 ` [PATCH 05/12] mmc: mxs-mmc: " Shawn Guo
2011-12-20 13:45 ` Marek Vasut
2011-12-20 12:00 ` [PATCH 06/12] mtd: gpmi-lib: " Shawn Guo
2011-12-20 13:46 ` Marek Vasut
2011-12-20 12:00 ` [PATCH 07/12] net: flexcan: " Shawn Guo
2011-12-20 13:48 ` Marek Vasut
2011-12-20 14:23 ` Shawn Guo
2011-12-20 12:00 ` [PATCH 08/12] serial: mxs-auart: " Shawn Guo
2011-12-20 13:49 ` Marek Vasut
2011-12-20 14:07 ` Uwe Kleine-König
2011-12-20 21:15 ` Russell King - ARM Linux
2011-12-20 21:28 ` Marek Vasut
2011-12-20 22:24 ` Russell King - ARM Linux
2011-12-21 1:06 ` Marek Vasut
2011-12-20 14:27 ` Shawn Guo
2011-12-20 12:00 ` Shawn Guo [this message]
2011-12-20 13:49 ` [PATCH 09/12] video: mxsfb: " Marek Vasut
2011-12-21 2:11 ` Florian Tobias Schandinat
2011-12-20 12:00 ` [PATCH 10/12] ASoC: mxs-saif: " Shawn Guo
2011-12-20 11:55 ` Mark Brown
2011-12-20 13:49 ` Marek Vasut
2011-12-20 12:00 ` [PATCH 11/12] clk: add config option HAVE_CLK_PREPARE into Kconfig Shawn Guo
2011-12-20 12:00 ` [PATCH 12/12] arm/mxs: select HAVE_CLK_PREPARE for clock Shawn Guo
2011-12-20 13:43 ` [PATCH 0/12] Add clk_prepare/clk_unprepare for mxs clock api Marek Vasut
2011-12-20 14:05 ` Shawn Guo
2011-12-20 13:59 ` Marek Vasut
2011-12-20 14:21 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1324382443-4439-10-git-send-email-shawn.guo@linaro.org \
--to=shawn.guo@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).