From mboxrd@z Thu Jan 1 00:00:00 1970 From: tarun.kanti@ti.com (Tarun Kanti DebBarma) Date: Tue, 27 Dec 2011 21:39:26 +0530 Subject: [PATCH v9 REPOST 15/25] gpio/omap: fix bankwidth for OMAP7xx MPUIO In-Reply-To: <1325002176-25626-1-git-send-email-tarun.kanti@ti.com> References: <1325002176-25626-1-git-send-email-tarun.kanti@ti.com> Message-ID: <1325002176-25626-16-git-send-email-tarun.kanti@ti.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org From: Charulatha V In all OMAP1 SoCs, the MPUIO bank width is 16 bits. But, in OMAP7xx, it is wrongly initialised to 32. Fix this. Signed-off-by: Charulatha V Reviewed-by: Santosh Shilimkar Acked-by: Tony Lindgren --- arch/arm/mach-omap1/gpio7xx.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/arch/arm/mach-omap1/gpio7xx.c b/arch/arm/mach-omap1/gpio7xx.c index 433491c..4771d6b 100644 --- a/arch/arm/mach-omap1/gpio7xx.c +++ b/arch/arm/mach-omap1/gpio7xx.c @@ -52,8 +52,8 @@ static struct omap_gpio_reg_offs omap7xx_mpuio_regs = { static struct __initdata omap_gpio_platform_data omap7xx_mpu_gpio_config = { .virtual_irq_start = IH_MPUIO_BASE, - .bank_width = 32, .is_mpuio = true, + .bank_width = 16, .bank_stride = 2, .regs = &omap7xx_mpuio_regs, }; -- 1.7.0.4