From mboxrd@z Thu Jan 1 00:00:00 1970 From: linus.walleij@linaro.org (Linus Walleij) Date: Wed, 4 Jan 2012 01:39:54 +0100 Subject: [PATCH] mach-integrator: defconfig for both AP and CP Message-ID: <1325637594-20818-1-git-send-email-linus.walleij@linaro.org> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org This updates the Integrator defconfig to include the hardware found on the Integrator/CP: SMC91X, CLCD, MMCI/PL180. Further the sometimes disrupting VGA_CONSOLE is disabled (those who have a VGA card can enable it) and typical default VFAT layouts of the MMC cards are supported by enabling VFAT and CP437 encoding of the file system. After this my default kernels boot successfully on Integrator AP and CP alike. Signed-off-by: Linus Walleij --- arch/arm/configs/integrator_defconfig | 8 ++++++++ 1 files changed, 8 insertions(+), 0 deletions(-) diff --git a/arch/arm/configs/integrator_defconfig b/arch/arm/configs/integrator_defconfig index 1103f62..a8314c3 100644 --- a/arch/arm/configs/integrator_defconfig +++ b/arch/arm/configs/integrator_defconfig @@ -57,18 +57,24 @@ CONFIG_NETDEVICES=y CONFIG_NET_ETHERNET=y CONFIG_NET_PCI=y CONFIG_E100=y +CONFIG_SMC91X=y # CONFIG_KEYBOARD_ATKBD is not set # CONFIG_SERIO_SERPORT is not set CONFIG_SERIAL_AMBA_PL010=y CONFIG_SERIAL_AMBA_PL010_CONSOLE=y CONFIG_FB=y CONFIG_FB_MODE_HELPERS=y +CONFIG_FB_ARMCLCD=y CONFIG_FB_MATROX=y CONFIG_FB_MATROX_MILLENIUM=y CONFIG_FB_MATROX_MYSTIQUE=y +# CONFIG_VGA_CONSOLE is not set +CONFIG_MMC=y +CONFIG_MMC_ARMMMCI=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_PL030=y CONFIG_EXT2_FS=y +CONFIG_VFAT_FS=y CONFIG_TMPFS=y CONFIG_JFFS2_FS=y CONFIG_CRAMFS=y @@ -78,5 +84,7 @@ CONFIG_ROOT_NFS=y CONFIG_NFSD=y CONFIG_NFSD_V3=y CONFIG_PARTITION_ADVANCED=y +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_ISO8859_1=y CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y -- 1.7.6.4