linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: swarren@nvidia.com (Stephen Warren)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 6/6] gpio: tegra: Parameterize the number of banks
Date: Wed,  4 Jan 2012 11:39:38 -0700	[thread overview]
Message-ID: <1325702378-20863-6-git-send-email-swarren@nvidia.com> (raw)
In-Reply-To: <1325702378-20863-1-git-send-email-swarren@nvidia.com>

Tegra20's GPIO controller has 7 banks, and Tegra30's controller has 8
banks. Allow the number of banks to be configured at run-time by the
device tree.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
---
This patch depends on:
http://ftp.arm.linux.org.uk/pub/armlinux/kernel/git-cur/linux-2.6-arm.git
devel-stable 44986ab056076e9dc9fb9f8b4729afef7fa72616
---
 .../devicetree/bindings/gpio/gpio_nvidia.txt       |    4 ++
 arch/arm/boot/dts/tegra20.dtsi                     |    1 +
 arch/arm/boot/dts/tegra30.dtsi                     |    1 +
 drivers/gpio/gpio-tegra.c                          |   41 +++++++++++++++----
 4 files changed, 38 insertions(+), 9 deletions(-)

diff --git a/Documentation/devicetree/bindings/gpio/gpio_nvidia.txt b/Documentation/devicetree/bindings/gpio/gpio_nvidia.txt
index d114e19..f9c2cc2 100644
--- a/Documentation/devicetree/bindings/gpio/gpio_nvidia.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio_nvidia.txt
@@ -3,6 +3,9 @@ NVIDIA Tegra 2 GPIO controller
 Required properties:
 - compatible : "nvidia,tegra20-gpio"
 - reg : Physical base address and length of the controller's registers.
+- nvidia,num-banks : The number of GPIO banks. This should be 7 for
+  Tegra20 and 8 for Tegra30. This must match the number of interrupt
+  specifiers in the interrupts property.
 - interrupts : The interrupt outputs from the controller.
 - #gpio-cells : Should be two. The first cell is the pin number and the
   second cell is used to specify optional parameters:
@@ -24,6 +27,7 @@ Example:
 gpio: gpio at 6000d000 {
 	compatible = "nvidia,tegra20-gpio";
 	reg = < 0x6000d000 0x1000 >;
+	nvidia,num-banks = <7>;
 	interrupts = < 0 32 0x04
 		       0 33 0x04
 		       0 34 0x04
diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi
index 0cdc4a6..853a5c6 100644
--- a/arch/arm/boot/dts/tegra20.dtsi
+++ b/arch/arm/boot/dts/tegra20.dtsi
@@ -66,6 +66,7 @@
 	gpio: gpio@6000d000 {
 		compatible = "nvidia,tegra20-gpio";
 		reg = < 0x6000d000 0x1000 >;
+		nvidia,num-banks = <7>;
 		interrupts = < 0 32 0x04
 			       0 33 0x04
 			       0 34 0x04
diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi
index 83024c0..368cbb3 100644
--- a/arch/arm/boot/dts/tegra30.dtsi
+++ b/arch/arm/boot/dts/tegra30.dtsi
@@ -55,6 +55,7 @@
 	gpio: gpio@6000d000 {
 		compatible = "nvidia,tegra30-gpio", "nvidia,tegra20-gpio";
 		reg = < 0x6000d000 0x1000 >;
+		nvidia,num-banks = <8>;
 		interrupts = < 0 32 0x04
 			       0 33 0x04
 			       0 34 0x04
diff --git a/drivers/gpio/gpio-tegra.c b/drivers/gpio/gpio-tegra.c
index c877a33..d27ca13 100644
--- a/drivers/gpio/gpio-tegra.c
+++ b/drivers/gpio/gpio-tegra.c
@@ -77,7 +77,8 @@ struct tegra_gpio_bank {
 
 static struct irq_domain irq_domain;
 static void __iomem *regs;
-static struct tegra_gpio_bank tegra_gpio_banks[7];
+static u32 tegra_gpio_bank_count;
+static struct tegra_gpio_bank *tegra_gpio_banks;
 
 static inline void tegra_gpio_writel(u32 val, u32 reg)
 {
@@ -274,7 +275,7 @@ void tegra_gpio_resume(void)
 
 	local_irq_save(flags);
 
-	for (b = 0; b < ARRAY_SIZE(tegra_gpio_banks); b++) {
+	for (b = 0; b < tegra_gpio_bank_count; b++) {
 		struct tegra_gpio_bank *bank = &tegra_gpio_banks[b];
 
 		for (p = 0; p < ARRAY_SIZE(bank->oe); p++) {
@@ -297,7 +298,7 @@ void tegra_gpio_suspend(void)
 	int p;
 
 	local_irq_save(flags);
-	for (b = 0; b < ARRAY_SIZE(tegra_gpio_banks); b++) {
+	for (b = 0; b < tegra_gpio_bank_count; b++) {
 		struct tegra_gpio_bank *bank = &tegra_gpio_banks[b];
 
 		for (p = 0; p < ARRAY_SIZE(bank->oe); p++) {
@@ -338,23 +339,45 @@ static struct lock_class_key gpio_lock_class;
 
 static int __devinit tegra_gpio_probe(struct platform_device *pdev)
 {
+	int irq_base;
 	struct resource *res;
 	struct tegra_gpio_bank *bank;
 	int gpio;
 	int i;
 	int j;
 
-	irq_domain.irq_base = irq_alloc_descs(-1, 0, TEGRA_NR_GPIOS, 0);
-	if (irq_domain.irq_base < 0) {
+	if (pdev->dev.of_node) {
+		if (of_property_read_u32(pdev->dev.of_node, "nvidia,num-banks",
+					 &tegra_gpio_bank_count) < 0) {
+			dev_err(&pdev->dev,
+				"Missing property 'nvidia,num-banks'\n");
+			return -ENODEV;
+		}
+	}
+	if (!tegra_gpio_bank_count)
+		tegra_gpio_bank_count = 7;
+	tegra_gpio_chip.ngpio = tegra_gpio_bank_count * 32;
+
+	tegra_gpio_banks = devm_kzalloc(&pdev->dev,
+			tegra_gpio_bank_count * sizeof(*tegra_gpio_banks),
+			GFP_KERNEL);
+	if (!tegra_gpio_banks) {
+		dev_err(&pdev->dev, "Couldn't allocate bank structure\n");
+		return -ENODEV;
+	}
+
+	irq_base = irq_alloc_descs(-1, 0, tegra_gpio_chip.ngpio, 0);
+	if (irq_base < 0) {
 		dev_err(&pdev->dev, "Couldn't allocate IRQ numbers\n");
 		return -ENODEV;
 	}
-	irq_domain.nr_irq = TEGRA_NR_GPIOS;
+	irq_domain.irq_base = irq_base;
+	irq_domain.nr_irq = tegra_gpio_chip.ngpio;
 	irq_domain.ops = &irq_domain_simple_ops;
 	irq_domain.of_node = pdev->dev.of_node;
 	irq_domain_add(&irq_domain);
 
-	for (i = 0; i < ARRAY_SIZE(tegra_gpio_banks); i++) {
+	for (i = 0; i < tegra_gpio_bank_count; i++) {
 		res = platform_get_resource(pdev, IORESOURCE_IRQ, i);
 		if (!res) {
 			dev_err(&pdev->dev, "Missing IRQ resource\n");
@@ -398,7 +421,7 @@ static int __devinit tegra_gpio_probe(struct platform_device *pdev)
 
 	gpiochip_add(&tegra_gpio_chip);
 
-	for (gpio = 0; gpio < TEGRA_NR_GPIOS; gpio++) {
+	for (gpio = 0; gpio < tegra_gpio_chip.ngpio; gpio++) {
 		int irq = irq_domain_to_irq(&irq_domain, gpio);
 		/* No validity check; all Tegra GPIOs are valid IRQs */
 
@@ -411,7 +434,7 @@ static int __devinit tegra_gpio_probe(struct platform_device *pdev)
 		set_irq_flags(irq, IRQF_VALID);
 	}
 
-	for (i = 0; i < ARRAY_SIZE(tegra_gpio_banks); i++) {
+	for (i = 0; i < tegra_gpio_bank_count; i++) {
 		bank = &tegra_gpio_banks[i];
 
 		irq_set_chained_handler(bank->irq, tegra_gpio_irq_handler);
-- 
1.7.0.4

  parent reply	other threads:[~2012-01-04 18:39 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-01-04 18:39 [PATCH 1/6] ARM: tegra: Remove use of TEGRA_GPIO_TO_IRQ Stephen Warren
2012-01-04 18:39 ` [PATCH 2/6] dt: tegra gpio: Flesh out binding documentation Stephen Warren
2012-01-04 18:39 ` [PATCH 3/6] ARM: dt: tegra30.dtsi: Reformat gpio's interrupts property Stephen Warren
2012-01-04 19:50   ` Grant Likely
2012-01-04 18:39 ` [PATCH 4/6] ARM: dt: tegra30.dtsi: Add extra GPIO interrupt Stephen Warren
2012-01-04 18:39 ` [PATCH 5/6] gpio: tegra: Dynamically allocate IRQ base, and support DT Stephen Warren
2012-01-05  7:23   ` Thierry Reding
2012-01-05 17:47     ` Stephen Warren
2012-01-05 17:56       ` Grant Likely
2012-01-05 13:17   ` Jamie Iles
2012-01-05 16:47     ` Stephen Warren
2012-01-05 16:48       ` Jamie Iles
2012-01-04 18:39 ` Stephen Warren [this message]
2012-01-04 19:54   ` [PATCH 6/6] gpio: tegra: Parameterize the number of banks Rob Herring
2012-01-04 20:00     ` Stephen Warren
2012-01-04 22:00       ` Grant Likely
2012-01-05 17:24         ` Rob Herring
2012-01-13 20:55           ` Stephen Warren
2012-01-14 15:15             ` Rob Herring
2012-01-04 19:52 ` [PATCH 1/6] ARM: tegra: Remove use of TEGRA_GPIO_TO_IRQ Grant Likely
2012-01-24  8:34   ` Olof Johansson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1325702378-20863-6-git-send-email-swarren@nvidia.com \
    --to=swarren@nvidia.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).