From: rmallon@gmail.com (Ryan Mallon)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 01/11] ep93xx: Move PHYS_BASE defines to local SoC header file
Date: Wed, 11 Jan 2012 14:14:26 +1100 [thread overview]
Message-ID: <1326251676-7593-2-git-send-email-rmallon@gmail.com> (raw)
In-Reply-To: <1326251676-7593-1-git-send-email-rmallon@gmail.com>
The PHYS_BASE defines in arch/arm/mach-ep93xx/include/mach-ep93xx-regs.h are
only used in the SoC code. Move the defines to a local header file.
Cc: Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Mika Westerberg <mika.westerberg@iki.fi>
Signed-off-by: Ryan Mallon <rmallon@gmail.com>
---
arch/arm/mach-ep93xx/adssphere.c | 1 +
arch/arm/mach-ep93xx/edb93xx.c | 2 +
arch/arm/mach-ep93xx/gesbc9312.c | 1 +
arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h | 34 ---------------
arch/arm/mach-ep93xx/micro9.c | 1 +
arch/arm/mach-ep93xx/simone.c | 2 +
arch/arm/mach-ep93xx/snappercl15.c | 2 +
arch/arm/mach-ep93xx/soc.h | 50 +++++++++++++++++++++++
arch/arm/mach-ep93xx/ts72xx.c | 2 +
arch/arm/mach-ep93xx/vision_ep9307.c | 2 +
10 files changed, 63 insertions(+), 34 deletions(-)
create mode 100644 arch/arm/mach-ep93xx/soc.h
diff --git a/arch/arm/mach-ep93xx/adssphere.c b/arch/arm/mach-ep93xx/adssphere.c
index 0713448..4e0a776 100644
--- a/arch/arm/mach-ep93xx/adssphere.c
+++ b/arch/arm/mach-ep93xx/adssphere.c
@@ -19,6 +19,7 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
+#include "soc.h"
static struct ep93xx_eth_data __initdata adssphere_eth_data = {
.phy_id = 1,
diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c
index 70ef8c5..24df3ff 100644
--- a/arch/arm/mach-ep93xx/edb93xx.c
+++ b/arch/arm/mach-ep93xx/edb93xx.c
@@ -42,6 +42,8 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
+#include "soc.h"
+
static void __init edb93xx_register_flash(void)
{
diff --git a/arch/arm/mach-ep93xx/gesbc9312.c b/arch/arm/mach-ep93xx/gesbc9312.c
index 45ee205..86d36da 100644
--- a/arch/arm/mach-ep93xx/gesbc9312.c
+++ b/arch/arm/mach-ep93xx/gesbc9312.c
@@ -19,6 +19,7 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
+#include "soc.h"
static struct ep93xx_eth_data __initdata gesbc9312_eth_data = {
.phy_id = 1,
diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
index c4a7b84..b029305 100644
--- a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
+++ b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
@@ -6,40 +6,6 @@
#define __ASM_ARCH_EP93XX_REGS_H
/*
- * EP93xx Physical Memory Map:
- *
- * The ASDO pin is sampled at system reset to select a synchronous or
- * asynchronous boot configuration. When ASDO is "1" (i.e. pulled-up)
- * the synchronous boot mode is selected. When ASDO is "0" (i.e
- * pulled-down) the asynchronous boot mode is selected.
- *
- * In synchronous boot mode nSDCE3 is decoded starting at physical address
- * 0x00000000 and nCS0 is decoded starting at 0xf0000000. For asynchronous
- * boot mode they are swapped with nCS0 decoded at 0x00000000 ann nSDCE3
- * decoded at 0xf0000000.
- *
- * There is known errata for the EP93xx dealing with External Memory
- * Configurations. Please refer to "AN273: EP93xx Silicon Rev E Design
- * Guidelines" for more information. This document can be found at:
- *
- * http://www.cirrus.com/en/pubs/appNote/AN273REV4.pdf
- */
-
-#define EP93XX_CS0_PHYS_BASE_ASYNC 0x00000000 /* ASDO Pin = 0 */
-#define EP93XX_SDCE3_PHYS_BASE_SYNC 0x00000000 /* ASDO Pin = 1 */
-#define EP93XX_CS1_PHYS_BASE 0x10000000
-#define EP93XX_CS2_PHYS_BASE 0x20000000
-#define EP93XX_CS3_PHYS_BASE 0x30000000
-#define EP93XX_PCMCIA_PHYS_BASE 0x40000000
-#define EP93XX_CS6_PHYS_BASE 0x60000000
-#define EP93XX_CS7_PHYS_BASE 0x70000000
-#define EP93XX_SDCE0_PHYS_BASE 0xc0000000
-#define EP93XX_SDCE1_PHYS_BASE 0xd0000000
-#define EP93XX_SDCE2_PHYS_BASE 0xe0000000
-#define EP93XX_SDCE3_PHYS_BASE_ASYNC 0xf0000000 /* ASDO Pin = 0 */
-#define EP93XX_CS0_PHYS_BASE_SYNC 0xf0000000 /* ASDO Pin = 1 */
-
-/*
* EP93xx linux memory map:
*
* virt phys size
diff --git a/arch/arm/mach-ep93xx/micro9.c b/arch/arm/mach-ep93xx/micro9.c
index e72f736..858c8ec 100644
--- a/arch/arm/mach-ep93xx/micro9.c
+++ b/arch/arm/mach-ep93xx/micro9.c
@@ -21,6 +21,7 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
+#include "soc.h"
/*************************************************************************
* Micro9 NOR Flash
diff --git a/arch/arm/mach-ep93xx/simone.c b/arch/arm/mach-ep93xx/simone.c
index 52e090d..e1ea38e 100644
--- a/arch/arm/mach-ep93xx/simone.c
+++ b/arch/arm/mach-ep93xx/simone.c
@@ -28,6 +28,8 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
+#include "soc.h"
+
static struct ep93xx_eth_data __initdata simone_eth_data = {
.phy_id = 1,
};
diff --git a/arch/arm/mach-ep93xx/snappercl15.c b/arch/arm/mach-ep93xx/snappercl15.c
index 8121e3a..a23c6db 100644
--- a/arch/arm/mach-ep93xx/snappercl15.c
+++ b/arch/arm/mach-ep93xx/snappercl15.c
@@ -34,6 +34,8 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
+#include "soc.h"
+
#define SNAPPERCL15_NAND_BASE (EP93XX_CS7_PHYS_BASE + SZ_16M)
#define SNAPPERCL15_NAND_WPN (1 << 8) /* Write protect (active low) */
diff --git a/arch/arm/mach-ep93xx/soc.h b/arch/arm/mach-ep93xx/soc.h
new file mode 100644
index 0000000..74703e7
--- /dev/null
+++ b/arch/arm/mach-ep93xx/soc.h
@@ -0,0 +1,50 @@
+/*
+ * arch/arm/mach-ep93xx/soc.h
+ *
+ * Copyright (C) 2012 Open Kernel Labs <www.ok-labs.com>
+ * Copyright (C) 2012 Ryan Mallon <rmallon@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#ifndef _EP93XX_SOC_H
+#define _EP93XX_SOC_H
+
+/*
+ * EP93xx Physical Memory Map:
+ *
+ * The ASDO pin is sampled at system reset to select a synchronous or
+ * asynchronous boot configuration. When ASDO is "1" (i.e. pulled-up)
+ * the synchronous boot mode is selected. When ASDO is "0" (i.e
+ * pulled-down) the asynchronous boot mode is selected.
+ *
+ * In synchronous boot mode nSDCE3 is decoded starting at physical address
+ * 0x00000000 and nCS0 is decoded starting at 0xf0000000. For asynchronous
+ * boot mode they are swapped with nCS0 decoded at 0x00000000 ann nSDCE3
+ * decoded at 0xf0000000.
+ *
+ * There is known errata for the EP93xx dealing with External Memory
+ * Configurations. Please refer to "AN273: EP93xx Silicon Rev E Design
+ * Guidelines" for more information. This document can be found at:
+ *
+ * http://www.cirrus.com/en/pubs/appNote/AN273REV4.pdf
+ */
+
+#define EP93XX_CS0_PHYS_BASE_ASYNC 0x00000000 /* ASDO Pin = 0 */
+#define EP93XX_SDCE3_PHYS_BASE_SYNC 0x00000000 /* ASDO Pin = 1 */
+#define EP93XX_CS1_PHYS_BASE 0x10000000
+#define EP93XX_CS2_PHYS_BASE 0x20000000
+#define EP93XX_CS3_PHYS_BASE 0x30000000
+#define EP93XX_PCMCIA_PHYS_BASE 0x40000000
+#define EP93XX_CS6_PHYS_BASE 0x60000000
+#define EP93XX_CS7_PHYS_BASE 0x70000000
+#define EP93XX_SDCE0_PHYS_BASE 0xc0000000
+#define EP93XX_SDCE1_PHYS_BASE 0xd0000000
+#define EP93XX_SDCE2_PHYS_BASE 0xe0000000
+#define EP93XX_SDCE3_PHYS_BASE_ASYNC 0xf0000000 /* ASDO Pin = 0 */
+#define EP93XX_CS0_PHYS_BASE_SYNC 0xf0000000 /* ASDO Pin = 1 */
+
+#endif /* _EP93XX_PHYS_BASE_H */
diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c
index 8b2f143..f5965db 100644
--- a/arch/arm/mach-ep93xx/ts72xx.c
+++ b/arch/arm/mach-ep93xx/ts72xx.c
@@ -27,6 +27,8 @@
#include <asm/mach/map.h>
#include <asm/mach/arch.h>
+#include "soc.h"
+
static struct map_desc ts72xx_io_desc[] __initdata = {
{
diff --git a/arch/arm/mach-ep93xx/vision_ep9307.c b/arch/arm/mach-ep93xx/vision_ep9307.c
index d96e4db..9d763a7 100644
--- a/arch/arm/mach-ep93xx/vision_ep9307.c
+++ b/arch/arm/mach-ep93xx/vision_ep9307.c
@@ -37,6 +37,8 @@
#include <asm/mach/map.h>
#include <asm/mach/arch.h>
+#include "soc.h"
+
/*************************************************************************
* Static I/O mappings for the FPGA
*************************************************************************/
--
1.7.0.4
next prev parent reply other threads:[~2012-01-11 3:14 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-01-11 3:14 [PATCH 00/11] ep93xx: Move SoC private bits to core Ryan Mallon
2012-01-11 3:14 ` Ryan Mallon [this message]
2012-01-13 17:18 ` [PATCH 01/11] ep93xx: Move PHYS_BASE defines to local SoC header file H Hartley Sweeten
2012-01-13 21:35 ` Ryan Mallon
2012-01-11 3:14 ` [PATCH 02/11] ep93xx: Move GPIO defines to gpio-ep93xx.h Ryan Mallon
2012-01-13 17:22 ` H Hartley Sweeten
2012-01-11 3:14 ` [PATCH 03/11] ep93xx: Move peripheral defines to local SoC header Ryan Mallon
2012-01-13 17:25 ` H Hartley Sweeten
2012-01-11 3:14 ` [PATCH 04/11] ep93xx: Configure GPIO ports in core code Ryan Mallon
2012-01-13 6:27 ` Mika Westerberg
2012-01-13 7:00 ` Ryan Mallon
2012-01-13 8:12 ` Mika Westerberg
2012-01-13 18:05 ` H Hartley Sweeten
2012-01-11 3:14 ` [PATCH 05/11] ep93xx: Move arch_reset to core.c Ryan Mallon
2012-01-13 17:28 ` H Hartley Sweeten
2012-01-11 3:14 ` [PATCH 06/11] ep93xx: Don't use system controller defines in audio drivers Ryan Mallon
2012-01-11 17:42 ` Mark Brown
2012-01-11 19:57 ` Ryan Mallon
2012-01-12 3:04 ` Mark Brown
2012-01-13 17:35 ` H Hartley Sweeten
2012-01-13 21:41 ` Ryan Mallon
2012-01-13 22:13 ` Mark Brown
2012-01-11 3:14 ` [PATCH 07/11] ep93xx: Make syscon access functions private to SoC Ryan Mallon
2012-01-13 17:38 ` H Hartley Sweeten
2012-01-13 21:43 ` Ryan Mallon
2012-01-11 3:14 ` [PATCH 08/11] ep93xx: Move EP93XX_WATCHDOG_BASE define to driver Ryan Mallon
2012-01-13 17:45 ` H Hartley Sweeten
2012-01-13 21:46 ` Ryan Mallon
2012-01-13 22:48 ` H Hartley Sweeten
2012-01-11 3:14 ` [PATCH 09/11] ep93xx: Move crunch code to mach-ep93xx directory Ryan Mallon
2012-01-13 17:51 ` H Hartley Sweeten
2012-01-13 21:16 ` Ryan Mallon
2012-01-13 21:52 ` Russell King - ARM Linux
2012-01-11 3:14 ` [PATCH 10/11] ep93xx: Move EP93XX_SYSCON defines to SoC private header Ryan Mallon
2012-01-13 17:52 ` H Hartley Sweeten
2012-01-11 3:14 ` [PATCH 11/11] ep93xx: Remove unnecessary includes of ep93xx-regs.h Ryan Mallon
2012-01-13 17:54 ` H Hartley Sweeten
2012-01-12 0:17 ` [PATCH 00/11] ep93xx: Move SoC private bits to core Ryan Mallon
2012-01-13 17:56 ` H Hartley Sweeten
2012-01-14 19:07 ` Mika Westerberg
2012-01-16 4:51 ` Ryan Mallon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1326251676-7593-2-git-send-email-rmallon@gmail.com \
--to=rmallon@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).