From: thomas.abraham@linaro.org (Thomas Abraham)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 0/2] Add lcd driver for panels with gpio controlled panel reset
Date: Thu, 12 Jan 2012 13:13:29 +0530 [thread overview]
Message-ID: <1326354211-27064-1-git-send-email-thomas.abraham@linaro.org> (raw)
Changes since v1:
- Fixed gpio leak, added MODULE_DEVICE_TABLE and dev_pm_ops.
- Changed device tree bindings.
This patchset adds support for passive panels that do not use a nRESET line
which is controlled by a GPIO of the host system and which do not use a
serial comamnd interface (i2c or spi) or memory-mapped-io interface.
The first patch adds driver for passive raster-type lcd's with gpio controlled
panel reset. It includes support for both dt and non-dt platforms. The second
patch adds support for using this driver on Origen board.
Thomas Abraham (2):
backlight: lcd: add driver for raster-type lcd's with gpio controlled panel reset
ARM: Exynos: Use lcd power control driver for lcd panel
.../devicetree/bindings/lcd/lcd-pwrctrl.txt | 48 ++++
arch/arm/mach-exynos/mach-origen.c | 29 +--
drivers/video/backlight/Kconfig | 7 +
drivers/video/backlight/Makefile | 1 +
drivers/video/backlight/lcd_pwrctrl.c | 232 ++++++++++++++++++++
include/video/lcd_pwrctrl.h | 34 +++
6 files changed, 328 insertions(+), 23 deletions(-)
create mode 100644 Documentation/devicetree/bindings/lcd/lcd-pwrctrl.txt
create mode 100644 drivers/video/backlight/lcd_pwrctrl.c
create mode 100644 include/video/lcd_pwrctrl.h
next reply other threads:[~2012-01-12 7:43 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-01-12 7:43 Thomas Abraham [this message]
2012-01-12 7:43 ` [PATCH v2 1/2] backlight: lcd: add driver for raster-type lcd's with gpio controlled panel reset Thomas Abraham
2012-01-16 19:33 ` Mark Brown
2012-01-12 7:43 ` [PATCH v2 2/2] ARM: Exynos: Use lcd power control driver for lcd panel Thomas Abraham
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1326354211-27064-1-git-send-email-thomas.abraham@linaro.org \
--to=thomas.abraham@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).