[PATCH] ARM: mx28: Clear CLKGATE bit prior to changing DIV field

[fabio.estevam@freescale.com (Fabio Estevam)]

MX28 Reference Manual states the following about the CLKGATE bit of register HW_CLKCTRL_SAIF0:

"The DIV field can change ONLY when this clock gate bit field is low."

So clear this bit prior to writing to the DIV field as required.

This also fixes the following error during mxs-sgtl5000 probe.

[    0.660000] saif0_clk_set_rate: divider writing timeout                     
[    0.670000] mxs-sgtl5000: probe of mxs-sgtl5000.0 failed with error -110    
[    0.670000] ALSA device list:                                               
[    0.680000]   No soundcards found.  

Audio is functional after this change.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
---
 arch/arm/mach-mxs/clock-mx28.c |    2 ++
 1 files changed, 2 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-mxs/clock-mx28.c b/arch/arm/mach-mxs/clock-mx28.c
index 5d68e41..f85c09d 100644
--- a/arch/arm/mach-mxs/clock-mx28.c
+++ b/arch/arm/mach-mxs/clock-mx28.c
@@ -475,6 +475,8 @@ static int name##_set_rate(struct clk *clk, unsigned long rate)		\
 		return -EINVAL;						\
 									\
 	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##rs);		\
+									\
+	reg &= ~BM_CLKCTRL_##rs##_CLKGATE;				\
 	reg &= ~BM_CLKCTRL_##rs##_DIV;					\
 	reg |= div << BP_CLKCTRL_##rs##_DIV;				\
 	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_##rs);		\
-- 
1.7.1