[PATCH 0/6] ux500: Export SoC information and some platform clean-up

[PATCH 0/6] ux500: Export SoC information and some platform clean-up

[Lee Jones]

This patch-set satisfies 4 objectives:
 1. Ensures each platform device can specify a suitable parent
 2. Provides a bus for SoC devices as a means to export information
 3. Allows ux500 to make use of the new SoC bus
 4. Cleans up unnecessary complexity from ux500 code

 Documentation/ABI/testing/sysfs-devices-soc    |   58 ++++++++
 arch/arm/mach-ux500/Kconfig                    |    1 +
 arch/arm/mach-ux500/board-mop500-sdi.c         |   31 ++--
 arch/arm/mach-ux500/board-mop500.c             |   74 ++++++----
 arch/arm/mach-ux500/board-mop500.h             |    8 +-
 arch/arm/mach-ux500/board-u5500-sdi.c          |    4 +-
 arch/arm/mach-ux500/board-u5500.c              |   27 +++--
 arch/arm/mach-ux500/cpu-db5500.c               |   36 ++++-
 arch/arm/mach-ux500/cpu-db8500.c               |   44 +++++-
 arch/arm/mach-ux500/cpu.c                      |   75 ++++++++++
 arch/arm/mach-ux500/devices-common.c           |   79 +++--------
 arch/arm/mach-ux500/devices-common.h           |   83 ++++++-----
 arch/arm/mach-ux500/devices-db5500.h           |  116 +++++++++------
 arch/arm/mach-ux500/devices-db8500.h           |  176 +++++++++++++----------
 arch/arm/mach-ux500/dma-db5500.c               |    3 +-
 arch/arm/mach-ux500/include/mach/db8500-regs.h |    3 +
 arch/arm/mach-ux500/include/mach/setup.h       |   10 +-
 arch/arm/mach-ux500/include/mach/usb.h         |    4 +-
 arch/arm/mach-ux500/usb.c                      |    7 +-
 drivers/base/Kconfig                           |    3 +
 drivers/base/Makefile                          |    1 +
 drivers/base/soc.c                             |  185 ++++++++++++++++++++++++
 include/linux/sys_soc.h                        |   37 +++++
 23 files changed, 761 insertions(+), 304 deletions(-)

[PATCH 1/6] mach-ux500: pass parent pointer to each platform device

[Lee Jones]

This patch provides a means for any device within ux500
platform code to allocate its own parent. This is particularly
prudent with the introduction of /sys/devices/socX, as a
device can now proclaim to be integral part of an SoC, rather
than a more generic platform device. Latter patches make good
use of this functionality.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 arch/arm/mach-ux500/board-mop500-sdi.c   |   31 +++---
 arch/arm/mach-ux500/board-mop500.c       |   62 ++++++-----
 arch/arm/mach-ux500/board-mop500.h       |    8 +-
 arch/arm/mach-ux500/board-u5500-sdi.c    |    4 +-
 arch/arm/mach-ux500/board-u5500.c        |   23 +++--
 arch/arm/mach-ux500/cpu-db5500.c         |   18 ++--
 arch/arm/mach-ux500/cpu-db8500.c         |   15 ++--
 arch/arm/mach-ux500/devices-common.c     |   13 ++-
 arch/arm/mach-ux500/devices-common.h     |   39 ++++---
 arch/arm/mach-ux500/devices-db5500.h     |  116 ++++++++++++---------
 arch/arm/mach-ux500/devices-db8500.h     |  166 +++++++++++++++++-------------
 arch/arm/mach-ux500/dma-db5500.c         |    3 +-
 arch/arm/mach-ux500/include/mach/setup.h |    8 +-
 arch/arm/mach-ux500/include/mach/usb.h   |    4 +-
 arch/arm/mach-ux500/usb.c                |    4 +-
 15 files changed, 289 insertions(+), 225 deletions(-)

diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c
index 23be34b..163c083 100644
--- a/arch/arm/mach-ux500/board-mop500-sdi.c
+++ b/arch/arm/mach-ux500/board-mop500-sdi.c
@@ -104,7 +104,7 @@ static struct mmci_platform_data mop500_sdi0_data = {
 #endif
 };
 
-static void sdi0_configure(void)
+static void sdi0_configure(struct device *parent)
 {
 	int ret;
 
@@ -123,15 +123,15 @@ static void sdi0_configure(void)
 	gpio_direction_output(sdi0_en, 1);
 
 	/* Add the device, force v2 to subrevision 1 */
-	db8500_add_sdi0(&mop500_sdi0_data, U8500_SDI_V2_PERIPHID);
+	db8500_add_sdi0(parent, &mop500_sdi0_data, U8500_SDI_V2_PERIPHID);
 }
 
-void mop500_sdi_tc35892_init(void)
+void mop500_sdi_tc35892_init(struct device *parent)
 {
 	mop500_sdi0_data.gpio_cd = GPIO_SDMMC_CD;
 	sdi0_en = GPIO_SDMMC_EN;
 	sdi0_vsel = GPIO_SDMMC_1V8_3V_SEL;
-	sdi0_configure();
+	sdi0_configure(parent);
 }
 
 /*
@@ -246,12 +246,13 @@ static struct mmci_platform_data mop500_sdi4_data = {
 #endif
 };
 
-void __init mop500_sdi_init(void)
+void __init mop500_sdi_init(struct device *parent)
 {
 	/* PoP:ed eMMC */
-	db8500_add_sdi2(&mop500_sdi2_data, U8500_SDI_V2_PERIPHID);
+	db8500_add_sdi2(parent, &mop500_sdi2_data, U8500_SDI_V2_PERIPHID);
 	/* On-board eMMC */
-	db8500_add_sdi4(&mop500_sdi4_data, U8500_SDI_V2_PERIPHID);
+	db8500_add_sdi4(parent, &mop500_sdi4_data, U8500_SDI_V2_PERIPHID);
+
 	/*
 	 * On boards with the TC35892 GPIO expander, sdi0 will finally
 	 * be added when the TC35892 initializes and calls
@@ -259,29 +260,29 @@ void __init mop500_sdi_init(void)
 	 */
 }
 
-void __init snowball_sdi_init(void)
+void __init snowball_sdi_init(struct device *parent)
 {
 	/* On-board eMMC */
-	db8500_add_sdi4(&mop500_sdi4_data, U8500_SDI_V2_PERIPHID);
+	db8500_add_sdi4(parent, &mop500_sdi4_data, U8500_SDI_V2_PERIPHID);
 	/* External Micro SD slot */
 	mop500_sdi0_data.gpio_cd = SNOWBALL_SDMMC_CD_GPIO;
 	mop500_sdi0_data.cd_invert = true;
 	sdi0_en = SNOWBALL_SDMMC_EN_GPIO;
 	sdi0_vsel = SNOWBALL_SDMMC_1V8_3V_GPIO;
-	sdi0_configure();
+	sdi0_configure(parent);
 }
 
-void __init hrefv60_sdi_init(void)
+void __init hrefv60_sdi_init(struct device *parent)
 {
 	/* PoP:ed eMMC */
-	db8500_add_sdi2(&mop500_sdi2_data, U8500_SDI_V2_PERIPHID);
+	db8500_add_sdi2(parent, &mop500_sdi2_data, U8500_SDI_V2_PERIPHID);
 	/* On-board eMMC */
-	db8500_add_sdi4(&mop500_sdi4_data, U8500_SDI_V2_PERIPHID);
+	db8500_add_sdi4(parent, &mop500_sdi4_data, U8500_SDI_V2_PERIPHID);
 	/* External Micro SD slot */
 	mop500_sdi0_data.gpio_cd = HREFV60_SDMMC_CD_GPIO;
 	sdi0_en = HREFV60_SDMMC_EN_GPIO;
 	sdi0_vsel = HREFV60_SDMMC_1V8_3V_GPIO;
-	sdi0_configure();
+	sdi0_configure(parent);
 	/* WLAN SDIO channel */
-	db8500_add_sdi1(&mop500_sdi1_data, U8500_SDI_V2_PERIPHID);
+	db8500_add_sdi1(parent, &mop500_sdi1_data, U8500_SDI_V2_PERIPHID);
 }
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index 5c00712..f9ce2a1 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -226,7 +226,12 @@ static struct tps6105x_platform_data mop500_tps61052_data = {
 
 static void mop500_tc35892_init(struct tc3589x *tc3589x, unsigned int base)
 {
-	mop500_sdi_tc35892_init();
+	struct device *parent = NULL;
+#if 0
+	/* FIXME: Is the sdi actually part of tc3589x? */
+	parent = tc3589x->dev;
+#endif
+	mop500_sdi_tc35892_init(parent);
 }
 
 static struct tc3589x_gpio_platform_data mop500_tc35892_gpio_data = {
@@ -353,12 +358,12 @@ U8500_I2C_CONTROLLER(1, 0xe, 1, 8, 100000, 200, I2C_FREQ_MODE_FAST);
 U8500_I2C_CONTROLLER(2,	0xe, 1, 8, 100000, 200, I2C_FREQ_MODE_FAST);
 U8500_I2C_CONTROLLER(3,	0xe, 1, 8, 100000, 200, I2C_FREQ_MODE_FAST);
 
-static void __init mop500_i2c_init(void)
+static void __init mop500_i2c_init(struct device *parent)
 {
-	db8500_add_i2c0(&u8500_i2c0_data);
-	db8500_add_i2c1(&u8500_i2c1_data);
-	db8500_add_i2c2(&u8500_i2c2_data);
-	db8500_add_i2c3(&u8500_i2c3_data);
+	db8500_add_i2c0(parent, &u8500_i2c0_data);
+	db8500_add_i2c1(parent, &u8500_i2c1_data);
+	db8500_add_i2c2(parent, &u8500_i2c2_data);
+	db8500_add_i2c3(parent, &u8500_i2c3_data);
 }
 
 static struct gpio_keys_button mop500_gpio_keys[] = {
@@ -451,9 +456,9 @@ static struct pl022_ssp_controller ssp0_platform_data = {
 	.num_chipselect = 5,
 };
 
-static void __init mop500_spi_init(void)
+static void __init mop500_spi_init(struct device *parent)
 {
-	db8500_add_ssp0(&ssp0_platform_data);
+	db8500_add_ssp0(parent, &ssp0_platform_data);
 }
 
 #ifdef CONFIG_STE_DMA40
@@ -587,11 +592,11 @@ static struct amba_pl011_data uart2_plat = {
 #endif
 };
 
-static void __init mop500_uart_init(void)
+static void __init mop500_uart_init(struct device *parent)
 {
-	db8500_add_uart0(&uart0_plat);
-	db8500_add_uart1(&uart1_plat);
-	db8500_add_uart2(&uart2_plat);
+	db8500_add_uart0(parent, &uart0_plat);
+	db8500_add_uart1(parent, &uart1_plat);
+	db8500_add_uart2(parent, &uart2_plat);
 }
 
 static struct platform_device *snowball_platform_devs[] __initdata = {
@@ -603,21 +608,22 @@ static struct platform_device *snowball_platform_devs[] __initdata = {
 
 static void __init mop500_init_machine(void)
 {
+	struct device *parent = NULL;
 	int i2c0_devs;
 
 	mop500_gpio_keys[0].gpio = GPIO_PROX_SENSOR;
 
-	u8500_init_devices();
+	parent = u8500_init_devices();
 
 	mop500_pins_init();
 
 	platform_add_devices(mop500_platform_devs,
 			ARRAY_SIZE(mop500_platform_devs));
 
-	mop500_i2c_init();
-	mop500_sdi_init();
-	mop500_spi_init();
-	mop500_uart_init();
+	mop500_i2c_init(parent);
+	mop500_sdi_init(parent);
+	mop500_spi_init(parent);
+	mop500_uart_init(parent);
 
 	i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
 
@@ -631,19 +637,20 @@ static void __init mop500_init_machine(void)
 
 static void __init snowball_init_machine(void)
 {
+	struct device *parent = NULL;
 	int i2c0_devs;
 
-	u8500_init_devices();
+	parent = u8500_init_devices();
 
 	snowball_pins_init();
 
 	platform_add_devices(snowball_platform_devs,
 			ARRAY_SIZE(snowball_platform_devs));
 
-	mop500_i2c_init();
-	snowball_sdi_init();
-	mop500_spi_init();
-	mop500_uart_init();
+	mop500_i2c_init(parent);
+	snowball_sdi_init(parent);
+	mop500_spi_init(parent);
+	mop500_uart_init(parent);
 
 	i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
 	i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs);
@@ -656,6 +663,7 @@ static void __init snowball_init_machine(void)
 
 static void __init hrefv60_init_machine(void)
 {
+	struct device *parent = NULL;
 	int i2c0_devs;
 
 	/*
@@ -665,17 +673,17 @@ static void __init hrefv60_init_machine(void)
 	 */
 	mop500_gpio_keys[0].gpio = HREFV60_PROX_SENSE_GPIO;
 
-	u8500_init_devices();
+	parent = u8500_init_devices();
 
 	hrefv60_pins_init();
 
 	platform_add_devices(mop500_platform_devs,
 			ARRAY_SIZE(mop500_platform_devs));
 
-	mop500_i2c_init();
-	hrefv60_sdi_init();
-	mop500_spi_init();
-	mop500_uart_init();
+	mop500_i2c_init(parent);
+	hrefv60_sdi_init(parent);
+	mop500_spi_init(parent);
+	mop500_uart_init(parent);
 
 	i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
 
diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h
index f926d3d..3d594c2 100644
--- a/arch/arm/mach-ux500/board-mop500.h
+++ b/arch/arm/mach-ux500/board-mop500.h
@@ -75,10 +75,10 @@
 
 struct i2c_board_info;
 
-extern void mop500_sdi_init(void);
-extern void snowball_sdi_init(void);
-extern void hrefv60_sdi_init(void);
-extern void mop500_sdi_tc35892_init(void);
+extern void mop500_sdi_init(struct device *parent);
+extern void snowball_sdi_init(struct device *parent);
+extern void hrefv60_sdi_init(struct device *parent);
+extern void mop500_sdi_tc35892_init(struct device *parent);
 void __init mop500_u8500uib_init(void);
 void __init mop500_stuib_init(void);
 void __init mop500_pins_init(void);
diff --git a/arch/arm/mach-ux500/board-u5500-sdi.c b/arch/arm/mach-ux500/board-u5500-sdi.c
index 63c3f80..836112e 100644
--- a/arch/arm/mach-ux500/board-u5500-sdi.c
+++ b/arch/arm/mach-ux500/board-u5500-sdi.c
@@ -66,9 +66,9 @@ static struct mmci_platform_data u5500_sdi0_data = {
 #endif
 };
 
-void __init u5500_sdi_init(void)
+void __init u5500_sdi_init(struct device *parent)
 {
 	nmk_config_pins(u5500_sdi_pins, ARRAY_SIZE(u5500_sdi_pins));
 
-	db5500_add_sdi0(&u5500_sdi0_data);
+	db5500_add_sdi0(parent, &u5500_sdi0_data);
 }
diff --git a/arch/arm/mach-ux500/board-u5500.c b/arch/arm/mach-ux500/board-u5500.c
index 9de9e9c..d7a9596 100644
--- a/arch/arm/mach-ux500/board-u5500.c
+++ b/arch/arm/mach-ux500/board-u5500.c
@@ -97,9 +97,9 @@ static struct i2c_board_info __initdata u5500_i2c2_devices[] = {
 	},
 };
 
-static void __init u5500_i2c_init(void)
+static void __init u5500_i2c_init(struct device *parent)
 {
-	db5500_add_i2c2(&u5500_i2c2_data);
+	db5500_add_i2c2(parent, &u5500_i2c2_data);
 	i2c_register_board_info(2, ARRAY_AND_SIZE(u5500_i2c2_devices));
 }
 
@@ -126,20 +126,23 @@ static struct platform_device *u5500_platform_devices[] __initdata = {
 	&ab5500_device,
 };
 
-static void __init u5500_uart_init(void)
+static void __init u5500_uart_init(struct device *parent)
 {
-	db5500_add_uart0(NULL);
-	db5500_add_uart1(NULL);
-	db5500_add_uart2(NULL);
+	db5500_add_uart0(parent, NULL);
+	db5500_add_uart1(parent, NULL);
+	db5500_add_uart2(parent, NULL);
 }
 
 static void __init u5500_init_machine(void)
 {
-	u5500_init_devices();
+	struct device *parent = NULL;
+
+	parent = u5500_init_devices();
 	nmk_config_pins(u5500_pins, ARRAY_SIZE(u5500_pins));
-	u5500_i2c_init();
-	u5500_sdi_init();
-	u5500_uart_init();
+
+	u5500_i2c_init(parent);
+	u5500_sdi_init(parent);
+	u5500_uart_init(parent);
 
 	platform_add_devices(u5500_platform_devices,
 		ARRAY_SIZE(u5500_platform_devices));
diff --git a/arch/arm/mach-ux500/cpu-db5500.c b/arch/arm/mach-ux500/cpu-db5500.c
index 18aa5c0..c402fd6 100644
--- a/arch/arm/mach-ux500/cpu-db5500.c
+++ b/arch/arm/mach-ux500/cpu-db5500.c
@@ -147,13 +147,13 @@ static resource_size_t __initdata db5500_gpio_base[] = {
 	U5500_GPIOBANK7_BASE,
 };
 
-static void __init db5500_add_gpios(void)
+static void __init db5500_add_gpios(struct device *parent)
 {
 	struct nmk_gpio_platform_data pdata = {
 		/* No custom data yet */
 	};
 
-	dbx500_add_gpios(ARRAY_AND_SIZE(db5500_gpio_base),
+	dbx500_add_gpios(parent, ARRAY_AND_SIZE(db5500_gpio_base),
 			 IRQ_DB5500_GPIO0, &pdata);
 }
 
@@ -212,14 +212,18 @@ static int usb_db5500_tx_dma_cfg[] = {
 	DB5500_DMA_DEV38_USB_OTG_OEP_8
 };
 
-void __init u5500_init_devices(void)
+struct device* __init u5500_init_devices(void)
 {
-	db5500_add_gpios();
+	/* FIXME: First parameter to be a real parent. */
+	db5500_add_gpios(NULL);
 	db5500_pmu_init();
-	db5500_dma_init();
-	db5500_add_rtc();
-	db5500_add_usb(usb_db5500_rx_dma_cfg, usb_db5500_tx_dma_cfg);
+	db5500_dma_init(NULL);
+	db5500_add_rtc(NULL);
+	db5500_add_usb(NULL, usb_db5500_rx_dma_cfg, usb_db5500_tx_dma_cfg);
 
 	platform_add_devices(db5500_platform_devs,
 			     ARRAY_SIZE(db5500_platform_devs));
+
+	/* FIXME: Return value to be a real parent. */
+	return NULL;
 }
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index 7176ee7..1e8a2cb 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -132,13 +132,13 @@ static resource_size_t __initdata db8500_gpio_base[] = {
 	U8500_GPIOBANK8_BASE,
 };
 
-static void __init db8500_add_gpios(void)
+static void __init db8500_add_gpios(struct device *parent)
 {
 	struct nmk_gpio_platform_data pdata = {
 		.supports_sleepmode = true,
 	};
 
-	dbx500_add_gpios(ARRAY_AND_SIZE(db8500_gpio_base),
+	dbx500_add_gpios(parent, ARRAY_AND_SIZE(db8500_gpio_base),
 			 IRQ_DB8500_GPIO0, &pdata);
 }
 
@@ -167,14 +167,15 @@ static int usb_db8500_tx_dma_cfg[] = {
 /*
  * This function is called from the board init
  */
-void __init u8500_init_devices(void)
+struct device* __init u8500_init_devices(void)
 {
-	db8500_add_rtc();
-	db8500_add_gpios();
-	db8500_add_usb(usb_db8500_rx_dma_cfg, usb_db8500_tx_dma_cfg);
+	db8500_add_rtc(NULL);
+	db8500_add_gpios(NULL);
+	db8500_add_usb(NULL, usb_db8500_rx_dma_cfg, usb_db8500_tx_dma_cfg);
 
 	platform_device_register_simple("cpufreq-u8500", -1, NULL, 0);
 	platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs));
 
-	return ;
+	/* FIXME: Return value to be a real parent. */
+	return NULL;
 }
diff --git a/arch/arm/mach-ux500/devices-common.c b/arch/arm/mach-ux500/devices-common.c
index c563e54..96be248 100644
--- a/arch/arm/mach-ux500/devices-common.c
+++ b/arch/arm/mach-ux500/devices-common.c
@@ -20,8 +20,9 @@
 #include "devices-common.h"
 
 struct amba_device *
-dbx500_add_amba_device(const char *name, resource_size_t base,
-		       int irq, void *pdata, unsigned int periphid)
+dbx500_add_amba_device(struct device *parent, const char *name,
+		       resource_size_t base, int irq, void *pdata,
+		       unsigned int periphid)
 {
 	struct amba_device *dev;
 	int ret;
@@ -109,7 +110,7 @@ dbx500_add_platform_device_4k1irq(const char *name, int id,
 }
 
 static struct platform_device *
-dbx500_add_gpio(int id, resource_size_t addr, int irq,
+dbx500_add_gpio(struct device *parent, int id, resource_size_t addr, int irq,
 		struct nmk_gpio_platform_data *pdata)
 {
 	struct resource resources[] = {
@@ -130,8 +131,8 @@ dbx500_add_gpio(int id, resource_size_t addr, int irq,
 				pdata, sizeof(*pdata));
 }
 
-void dbx500_add_gpios(resource_size_t *base, int num, int irq,
-		      struct nmk_gpio_platform_data *pdata)
+void dbx500_add_gpios(struct device *parent, resource_size_t *base, int num,
+		      int irq, struct nmk_gpio_platform_data *pdata)
 {
 	int first = 0;
 	int i;
@@ -141,6 +142,6 @@ void dbx500_add_gpios(resource_size_t *base, int num, int irq,
 		pdata->first_irq = NOMADIK_GPIO_TO_IRQ(first);
 		pdata->num_gpio = 32;
 
-		dbx500_add_gpio(i, base[i], irq, pdata);
+		dbx500_add_gpio(parent, i, base[i], irq, pdata);
 	}
 }
diff --git a/arch/arm/mach-ux500/devices-common.h b/arch/arm/mach-ux500/devices-common.h
index 7825705..f8adff8 100644
--- a/arch/arm/mach-ux500/devices-common.h
+++ b/arch/arm/mach-ux500/devices-common.h
@@ -9,7 +9,7 @@
 #define __DEVICES_COMMON_H
 
 extern struct amba_device *
-dbx500_add_amba_device(const char *name, resource_size_t base,
+dbx500_add_amba_device(struct device *parent, const char *name, resource_size_t base,
 		       int irq, void *pdata, unsigned int periphid);
 
 extern struct platform_device *
@@ -20,43 +20,46 @@ dbx500_add_platform_device_4k1irq(const char *name, int id,
 struct spi_master_cntlr;
 
 static inline struct amba_device *
-dbx500_add_msp_spi(const char *name, resource_size_t base, int irq,
+dbx500_add_msp_spi(struct device *parent, const char *name,
+		   resource_size_t base, int irq,
 		   struct spi_master_cntlr *pdata)
 {
-	return dbx500_add_amba_device(name, base, irq, pdata, 0);
+	return dbx500_add_amba_device(parent, name, base, irq,
+				      pdata, 0);
 }
 
 static inline struct amba_device *
-dbx500_add_spi(const char *name, resource_size_t base, int irq,
-	       struct spi_master_cntlr *pdata,
+dbx500_add_spi(struct device *parent, const char *name, resource_size_t base,
+	       int irq, struct spi_master_cntlr *pdata,
 	       u32 periphid)
 {
-	return dbx500_add_amba_device(name, base, irq, pdata, periphid);
+	return dbx500_add_amba_device(parent, name, base, irq,
+				      pdata, periphid);
 }
 
 struct mmci_platform_data;
 
 static inline struct amba_device *
-dbx500_add_sdi(const char *name, resource_size_t base, int irq,
-	       struct mmci_platform_data *pdata,
-	       u32 periphid)
+dbx500_add_sdi(struct device *parent, const char *name, resource_size_t base,
+	       int irq, struct mmci_platform_data *pdata, u32 periphid)
 {
-	return dbx500_add_amba_device(name, base, irq, pdata, periphid);
+	return dbx500_add_amba_device(parent, name, base, irq,
+				      pdata, periphid);
 }
 
 struct amba_pl011_data;
 
 static inline struct amba_device *
-dbx500_add_uart(const char *name, resource_size_t base, int irq,
-		struct amba_pl011_data *pdata)
+dbx500_add_uart(struct device *parent, const char *name, resource_size_t base,
+		int irq, struct amba_pl011_data *pdata)
 {
-	return dbx500_add_amba_device(name, base, irq, pdata, 0);
+	return dbx500_add_amba_device(parent, name, base, irq, pdata, 0);
 }
 
 struct nmk_i2c_controller;
 
 static inline struct platform_device *
-dbx500_add_i2c(int id, resource_size_t base, int irq,
+dbx500_add_i2c(struct device *parent, int id, resource_size_t base, int irq,
 	       struct nmk_i2c_controller *pdata)
 {
 	return dbx500_add_platform_device_4k1irq("nmk-i2c", id, base, irq,
@@ -74,14 +77,14 @@ dbx500_add_msp_i2s(int id, resource_size_t base, int irq,
 }
 
 static inline struct amba_device *
-dbx500_add_rtc(resource_size_t base, int irq)
+dbx500_add_rtc(struct device *parent, resource_size_t base, int irq)
 {
-	return dbx500_add_amba_device("rtc-pl031", base, irq, NULL, 0);
+	return dbx500_add_amba_device(parent, "rtc-pl031", base, irq, NULL, 0);
 }
 
 struct nmk_gpio_platform_data;
 
-void dbx500_add_gpios(resource_size_t *base, int num, int irq,
-		      struct nmk_gpio_platform_data *pdata);
+void dbx500_add_gpios(struct device *parent, resource_size_t *base, int num,
+		      int irq, struct nmk_gpio_platform_data *pdata);
 
 #endif
diff --git a/arch/arm/mach-ux500/devices-db5500.h b/arch/arm/mach-ux500/devices-db5500.h
index 0c4bccd..e709555 100644
--- a/arch/arm/mach-ux500/devices-db5500.h
+++ b/arch/arm/mach-ux500/devices-db5500.h
@@ -10,70 +10,90 @@
 
 #include "devices-common.h"
 
-#define db5500_add_i2c1(pdata) \
-	dbx500_add_i2c(1, U5500_I2C1_BASE, IRQ_DB5500_I2C1, pdata)
-#define db5500_add_i2c2(pdata) \
-	dbx500_add_i2c(2, U5500_I2C2_BASE, IRQ_DB5500_I2C2, pdata)
-#define db5500_add_i2c3(pdata) \
-	dbx500_add_i2c(3, U5500_I2C3_BASE, IRQ_DB5500_I2C3, pdata)
+#define db5500_add_i2c1(parent, pdata) \
+	dbx500_add_i2c(parent, 1, U5500_I2C1_BASE, IRQ_DB5500_I2C1, pdata)
+#define db5500_add_i2c2(parent, pdata) \
+	dbx500_add_i2c(parent, 2, U5500_I2C2_BASE, IRQ_DB5500_I2C2, pdata)
+#define db5500_add_i2c3(parent, pdata) \
+	dbx500_add_i2c(parent, 3, U5500_I2C3_BASE, IRQ_DB5500_I2C3, pdata)
 
-#define db5500_add_msp0_i2s(pdata) \
-	dbx500_add_msp_i2s(0, U5500_MSP0_BASE, IRQ_DB5500_MSP0, pdata)
-#define db5500_add_msp1_i2s(pdata) \
-	dbx500_add_msp_i2s(1, U5500_MSP1_BASE, IRQ_DB5500_MSP1, pdata)
-#define db5500_add_msp2_i2s(pdata) \
-	dbx500_add_msp_i2s(2, U5500_MSP2_BASE, IRQ_DB5500_MSP2, pdata)
+#define db5500_add_msp0_spi(parent, pdata) \
+	dbx500_add_msp_spi(parent, "msp0", U5500_MSP0_BASE, \
+			   IRQ_DB5500_MSP0, pdata)
+#define db5500_add_msp1_spi(parent, pdata) \
+	dbx500_add_msp_spi(parent, "msp1", U5500_MSP1_BASE, \
+			   IRQ_DB5500_MSP1, pdata)
+#define db5500_add_msp2_spi(parent, pdata) \
+	dbx500_add_msp_spi(parent, "msp2", U5500_MSP2_BASE, \
+			   IRQ_DB5500_MSP2, pdata)
 
-#define db5500_add_msp0_spi(pdata) \
-	dbx500_add_msp_spi("msp0", U5500_MSP0_BASE, IRQ_DB5500_MSP0, pdata)
-#define db5500_add_msp1_spi(pdata) \
-	dbx500_add_msp_spi("msp1", U5500_MSP1_BASE, IRQ_DB5500_MSP1, pdata)
-#define db5500_add_msp2_spi(pdata) \
-	dbx500_add_msp_spi("msp2", U5500_MSP2_BASE, IRQ_DB5500_MSP2, pdata)
+#define db5500_add_msp0_spi(parent, pdata) \
+	dbx500_add_msp_spi(parent, "msp0", U5500_MSP0_BASE, \
+			  IRQ_DB5500_MSP0, pdata)
+#define db5500_add_msp1_spi(parent, pdata) \
+	dbx500_add_msp_spi(parent, "msp1", U5500_MSP1_BASE, \
+			  IRQ_DB5500_MSP1, pdata)
+#define db5500_add_msp2_spi(parent, pdata) \
+	dbx500_add_msp_spi(parent, "msp2", U5500_MSP2_BASE, \
+			  IRQ_DB5500_MSP2, pdata)
 
-#define db5500_add_rtc() \
-	dbx500_add_rtc(U5500_RTC_BASE, IRQ_DB5500_RTC);
+#define db5500_add_rtc(parent) \
+	dbx500_add_rtc(parent, U5500_RTC_BASE, IRQ_DB5500_RTC);
 
-#define db5500_add_usb(rx_cfg, tx_cfg) \
-	ux500_add_usb(U5500_USBOTG_BASE, IRQ_DB5500_USBOTG, rx_cfg, tx_cfg)
+#define db5500_add_usb(parent, rx_cfg, tx_cfg) \
+	ux500_add_usb(parent, U5500_USBOTG_BASE, \
+		      IRQ_DB5500_USBOTG, rx_cfg, tx_cfg)
 
-#define db5500_add_sdi0(pdata) \
-	dbx500_add_sdi("sdi0", U5500_SDI0_BASE, IRQ_DB5500_SDMMC0, pdata, \
+#define db5500_add_sdi0(parent, pdata) \
+	dbx500_add_sdi(parent, "sdi0", U5500_SDI0_BASE, \
+		       IRQ_DB5500_SDMMC0, pdata,	\
 		       0x10480180)
-#define db5500_add_sdi1(pdata) \
-	dbx500_add_sdi("sdi1", U5500_SDI1_BASE, IRQ_DB5500_SDMMC1, pdata, \
+#define db5500_add_sdi1(parent, pdata) \
+	dbx500_add_sdi(parent, "sdi1", U5500_SDI1_BASE, \
+		       IRQ_DB5500_SDMMC1, pdata,	\
 		       0x10480180)
-#define db5500_add_sdi2(pdata) \
-	dbx500_add_sdi("sdi2", U5500_SDI2_BASE, IRQ_DB5500_SDMMC2, pdata \
+#define db5500_add_sdi2(parent, pdata) \
+	dbx500_add_sdi(parent, "sdi2", U5500_SDI2_BASE, \
+		       IRQ_DB5500_SDMMC2, pdata		\
 		       0x10480180)
-#define db5500_add_sdi3(pdata) \
-	dbx500_add_sdi("sdi3", U5500_SDI3_BASE, IRQ_DB5500_SDMMC3, pdata \
+#define db5500_add_sdi3(parent, pdata) \
+	dbx500_add_sdi(parent, "sdi3", U5500_SDI3_BASE, \
+		       IRQ_DB5500_SDMMC3, pdata		\
 		       0x10480180)
-#define db5500_add_sdi4(pdata) \
-	dbx500_add_sdi("sdi4", U5500_SDI4_BASE, IRQ_DB5500_SDMMC4, pdata \
+#define db5500_add_sdi4(parent, pdata) \
+	dbx500_add_sdi(parent, "sdi4", U5500_SDI4_BASE, \
+		       IRQ_DB5500_SDMMC4, pdata		\
 		       0x10480180)
 
 /* This one has a bad peripheral ID in the U5500 silicon */
-#define db5500_add_spi0(pdata) \
-	dbx500_add_spi("spi0", U5500_SPI0_BASE, IRQ_DB5500_SPI0, pdata, \
+#define db5500_add_spi0(parent, pdata) \
+	dbx500_add_spi(parent, "spi0", U5500_SPI0_BASE, \
+		       IRQ_DB5500_SPI0, pdata,		\
 		       0x10080023)
-#define db5500_add_spi1(pdata) \
-	dbx500_add_spi("spi1", U5500_SPI1_BASE, IRQ_DB5500_SPI1, pdata, \
+#define db5500_add_spi1(parent, pdata) \
+	dbx500_add_spi(parent, "spi1", U5500_SPI1_BASE, \
+		       IRQ_DB5500_SPI1, pdata,		\
 		       0x10080023)
-#define db5500_add_spi2(pdata) \
-	dbx500_add_spi("spi2", U5500_SPI2_BASE, IRQ_DB5500_SPI2, pdata \
+#define db5500_add_spi2(parent, pdata) \
+	dbx500_add_spi(parent, "spi2", U5500_SPI2_BASE, \
+		       IRQ_DB5500_SPI2, pdata		\
 		       0x10080023)
-#define db5500_add_spi3(pdata) \
-	dbx500_add_spi("spi3", U5500_SPI3_BASE, IRQ_DB5500_SPI3, pdata \
+#define db5500_add_spi3(parent, pdata) \
+	dbx500_add_spi(parent, "spi3", U5500_SPI3_BASE, \
+		       IRQ_DB5500_SPI3, pdata		\
 		       0x10080023)
 
-#define db5500_add_uart0(plat) \
-	dbx500_add_uart("uart0", U5500_UART0_BASE, IRQ_DB5500_UART0, plat)
-#define db5500_add_uart1(plat) \
-	dbx500_add_uart("uart1", U5500_UART1_BASE, IRQ_DB5500_UART1, plat)
-#define db5500_add_uart2(plat) \
-	dbx500_add_uart("uart2", U5500_UART2_BASE, IRQ_DB5500_UART2, plat)
-#define db5500_add_uart3(plat) \
-	dbx500_add_uart("uart3", U5500_UART3_BASE, IRQ_DB5500_UART3, plat)
+#define db5500_add_uart0(parent, plat) \
+	dbx500_add_uart(parent, "uart0", U5500_UART0_BASE, \
+			IRQ_DB5500_UART0, plat)
+#define db5500_add_uart1(parent, plat) \
+	dbx500_add_uart(parent, "uart1", U5500_UART1_BASE, \
+			IRQ_DB5500_UART1, plat)
+#define db5500_add_uart2(parent, plat) \
+	dbx500_add_uart(parent, "uart2", U5500_UART2_BASE, \
+			IRQ_DB5500_UART2, plat)
+#define db5500_add_uart3(parent, plat) \
+	dbx500_add_uart(parent, "uart3", U5500_UART3_BASE, \
+			IRQ_DB5500_UART3, plat)
 
 #endif
diff --git a/arch/arm/mach-ux500/devices-db8500.h b/arch/arm/mach-ux500/devices-db8500.h
index cbd4a9a..9bd08ad 100644
--- a/arch/arm/mach-ux500/devices-db8500.h
+++ b/arch/arm/mach-ux500/devices-db8500.h
@@ -14,7 +14,9 @@ struct ske_keypad_platform_data;
 struct pl022_ssp_controller;
 
 static inline struct platform_device *
-db8500_add_ske_keypad(struct ske_keypad_platform_data *pdata)
+db8500_add_ske_keypad(struct device *parent,
+		      struct ske_keypad_platform_data *pdata,
+		      size_t size)
 {
 	return dbx500_add_platform_device_4k1irq("nmk-ske-keypad", -1,
 						 U8500_SKE_BASE,
@@ -22,80 +24,100 @@ db8500_add_ske_keypad(struct ske_keypad_platform_data *pdata)
 }
 
 static inline struct amba_device *
-db8500_add_ssp(const char *name, resource_size_t base, int irq,
-	       struct pl022_ssp_controller *pdata)
+db8500_add_ssp(struct device *parent, const char *name, resource_size_t base,
+	       int irq, struct pl022_ssp_controller *pdata)
 {
-	return dbx500_add_amba_device(name, base, irq, pdata, 0);
+	return dbx500_add_amba_device(parent, name, base, irq, pdata, 0);
 }
 
 
-#define db8500_add_i2c0(pdata) \
-	dbx500_add_i2c(0, U8500_I2C0_BASE, IRQ_DB8500_I2C0, pdata)
-#define db8500_add_i2c1(pdata) \
-	dbx500_add_i2c(1, U8500_I2C1_BASE, IRQ_DB8500_I2C1, pdata)
-#define db8500_add_i2c2(pdata) \
-	dbx500_add_i2c(2, U8500_I2C2_BASE, IRQ_DB8500_I2C2, pdata)
-#define db8500_add_i2c3(pdata) \
-	dbx500_add_i2c(3, U8500_I2C3_BASE, IRQ_DB8500_I2C3, pdata)
-#define db8500_add_i2c4(pdata) \
-	dbx500_add_i2c(4, U8500_I2C4_BASE, IRQ_DB8500_I2C4, pdata)
-
-#define db8500_add_msp0_i2s(pdata) \
-	dbx500_add_msp_i2s(0, U8500_MSP0_BASE, IRQ_DB8500_MSP0, pdata)
-#define db8500_add_msp1_i2s(pdata) \
-	dbx500_add_msp_i2s(1, U8500_MSP1_BASE, IRQ_DB8500_MSP1, pdata)
-#define db8500_add_msp2_i2s(pdata) \
-	dbx500_add_msp_i2s(2, U8500_MSP2_BASE, IRQ_DB8500_MSP2, pdata)
-#define db8500_add_msp3_i2s(pdata) \
-	dbx500_add_msp_i2s(3, U8500_MSP3_BASE, IRQ_DB8500_MSP1, pdata)
-
-#define db8500_add_msp0_spi(pdata) \
-	dbx500_add_msp_spi("msp0", U8500_MSP0_BASE, IRQ_DB8500_MSP0, pdata)
-#define db8500_add_msp1_spi(pdata) \
-	dbx500_add_msp_spi("msp1", U8500_MSP1_BASE, IRQ_DB8500_MSP1, pdata)
-#define db8500_add_msp2_spi(pdata) \
-	dbx500_add_msp_spi("msp2", U8500_MSP2_BASE, IRQ_DB8500_MSP2, pdata)
-#define db8500_add_msp3_spi(pdata) \
-	dbx500_add_msp_spi("msp3", U8500_MSP3_BASE, IRQ_DB8500_MSP1, pdata)
-
-#define db8500_add_rtc() \
-	dbx500_add_rtc(U8500_RTC_BASE, IRQ_DB8500_RTC);
-
-#define db8500_add_usb(rx_cfg, tx_cfg) \
-	ux500_add_usb(U8500_USBOTG_BASE, IRQ_DB8500_USBOTG, rx_cfg, tx_cfg)
-
-#define db8500_add_sdi0(pdata, pid) \
-	dbx500_add_sdi("sdi0", U8500_SDI0_BASE, IRQ_DB8500_SDMMC0, pdata, pid)
-#define db8500_add_sdi1(pdata, pid) \
-	dbx500_add_sdi("sdi1", U8500_SDI1_BASE, IRQ_DB8500_SDMMC1, pdata, pid)
-#define db8500_add_sdi2(pdata, pid) \
-	dbx500_add_sdi("sdi2", U8500_SDI2_BASE, IRQ_DB8500_SDMMC2, pdata, pid)
-#define db8500_add_sdi3(pdata, pid) \
-	dbx500_add_sdi("sdi3", U8500_SDI3_BASE, IRQ_DB8500_SDMMC3, pdata, pid)
-#define db8500_add_sdi4(pdata, pid) \
-	dbx500_add_sdi("sdi4", U8500_SDI4_BASE, IRQ_DB8500_SDMMC4, pdata, pid)
-#define db8500_add_sdi5(pdata, pid) \
-	dbx500_add_sdi("sdi5", U8500_SDI5_BASE, IRQ_DB8500_SDMMC5, pdata, pid)
-
-#define db8500_add_ssp0(pdata) \
-	db8500_add_ssp("ssp0", U8500_SSP0_BASE, IRQ_DB8500_SSP0, pdata)
-#define db8500_add_ssp1(pdata) \
-	db8500_add_ssp("ssp1", U8500_SSP1_BASE, IRQ_DB8500_SSP1, pdata)
-
-#define db8500_add_spi0(pdata) \
-	dbx500_add_spi("spi0", U8500_SPI0_BASE, IRQ_DB8500_SPI0, pdata, 0)
-#define db8500_add_spi1(pdata) \
-	dbx500_add_spi("spi1", U8500_SPI1_BASE, IRQ_DB8500_SPI1, pdata, 0)
-#define db8500_add_spi2(pdata) \
-	dbx500_add_spi("spi2", U8500_SPI2_BASE, IRQ_DB8500_SPI2, pdata, 0)
-#define db8500_add_spi3(pdata) \
-	dbx500_add_spi("spi3", U8500_SPI3_BASE, IRQ_DB8500_SPI3, pdata, 0)
-
-#define db8500_add_uart0(pdata) \
-	dbx500_add_uart("uart0", U8500_UART0_BASE, IRQ_DB8500_UART0, pdata)
-#define db8500_add_uart1(pdata) \
-	dbx500_add_uart("uart1", U8500_UART1_BASE, IRQ_DB8500_UART1, pdata)
-#define db8500_add_uart2(pdata) \
-	dbx500_add_uart("uart2", U8500_UART2_BASE, IRQ_DB8500_UART2, pdata)
+#define db8500_add_i2c0(parent, pdata) \
+	dbx500_add_i2c(parent, 0, U8500_I2C0_BASE, IRQ_DB8500_I2C0, pdata)
+#define db8500_add_i2c1(parent, pdata) \
+	dbx500_add_i2c(parent, 1, U8500_I2C1_BASE, IRQ_DB8500_I2C1, pdata)
+#define db8500_add_i2c2(parent, pdata) \
+	dbx500_add_i2c(parent, 2, U8500_I2C2_BASE, IRQ_DB8500_I2C2, pdata)
+#define db8500_add_i2c3(parent, pdata) \
+	dbx500_add_i2c(parent, 3, U8500_I2C3_BASE, IRQ_DB8500_I2C3, pdata)
+#define db8500_add_i2c4(parent, pdata) \
+	dbx500_add_i2c(parent, 4, U8500_I2C4_BASE, IRQ_DB8500_I2C4, pdata)
+
+#define db8500_add_msp0_i2s(parent, pdata) \
+	dbx500_add_msp_i2s(parent, 0, U8500_MSP0_BASE, IRQ_DB8500_MSP0, pdata)
+#define db8500_add_msp1_i2s(parent, pdata) \
+	dbx500_add_msp_i2s(parent, 1, U8500_MSP1_BASE, IRQ_DB8500_MSP1, pdata)
+#define db8500_add_msp2_i2s(parent, pdata) \
+	dbx500_add_msp_i2s(parent, 2, U8500_MSP2_BASE, IRQ_DB8500_MSP2, pdata)
+#define db8500_add_msp3_i2s(parent, pdata) \
+	dbx500_add_msp_i2s(parent, 3, U8500_MSP3_BASE, IRQ_DB8500_MSP1, pdata)
+
+#define db8500_add_msp0_spi(parent, pdata) \
+	dbx500_add_msp_spi(parent, "msp0", U8500_MSP0_BASE, \
+			   IRQ_DB8500_MSP0, pdata)
+#define db8500_add_msp1_spi(parent, pdata) \
+	dbx500_add_msp_spi(parent, "msp1", U8500_MSP1_BASE, \
+			   IRQ_DB8500_MSP1, pdata)
+#define db8500_add_msp2_spi(parent, pdata) \
+	dbx500_add_msp_spi(parent, "msp2", U8500_MSP2_BASE, \
+			   IRQ_DB8500_MSP2, pdata)
+#define db8500_add_msp3_spi(parent, pdata) \
+	dbx500_add_msp_spi(parent, "msp3", U8500_MSP3_BASE, \
+			   IRQ_DB8500_MSP1, pdata)
+
+#define db8500_add_rtc(parent) \
+	dbx500_add_rtc(parent, U8500_RTC_BASE, IRQ_DB8500_RTC);
+
+#define db8500_add_usb(parent, rx_cfg, tx_cfg) \
+	ux500_add_usb(parent, U8500_USBOTG_BASE, \
+		      IRQ_DB8500_USBOTG, rx_cfg, tx_cfg)
+
+#define db8500_add_sdi0(parent, pdata, pid) \
+	dbx500_add_sdi(parent, "sdi0", U8500_SDI0_BASE, \
+		       IRQ_DB8500_SDMMC0, pdata, pid)
+#define db8500_add_sdi1(parent, pdata, pid) \
+	dbx500_add_sdi(parent, "sdi1", U8500_SDI1_BASE, \
+		       IRQ_DB8500_SDMMC1, pdata, pid)
+#define db8500_add_sdi2(parent, pdata, pid) \
+	dbx500_add_sdi(parent, "sdi2", U8500_SDI2_BASE, \
+		       IRQ_DB8500_SDMMC2, pdata, pid)
+#define db8500_add_sdi3(parent, pdata, pid) \
+	dbx500_add_sdi(parent, "sdi3", U8500_SDI3_BASE, \
+		       IRQ_DB8500_SDMMC3, pdata, pid)
+#define db8500_add_sdi4(parent, pdata, pid) \
+	dbx500_add_sdi(parent, "sdi4", U8500_SDI4_BASE, \
+		       IRQ_DB8500_SDMMC4, pdata, pid)
+#define db8500_add_sdi5(parent, pdata, pid) \
+	dbx500_add_sdi(parent, "sdi5", U8500_SDI5_BASE, \
+		       IRQ_DB8500_SDMMC5, pdata, pid)
+
+#define db8500_add_ssp0(parent, pdata) \
+	db8500_add_ssp(parent, "ssp0", U8500_SSP0_BASE, \
+		       IRQ_DB8500_SSP0, pdata)
+#define db8500_add_ssp1(parent, pdata) \
+	db8500_add_ssp(parent, "ssp1", U8500_SSP1_BASE, \
+		       IRQ_DB8500_SSP1, pdata)
+
+#define db8500_add_spi0(parent, pdata) \
+	dbx500_add_spi(parent, "spi0", U8500_SPI0_BASE, \
+		       IRQ_DB8500_SPI0, pdata, 0)
+#define db8500_add_spi1(parent, pdata) \
+	dbx500_add_spi(parent, "spi1", U8500_SPI1_BASE, \
+		       IRQ_DB8500_SPI1, pdata, 0)
+#define db8500_add_spi2(parent, pdata) \
+	dbx500_add_spi(parent, "spi2", U8500_SPI2_BASE, \
+		       IRQ_DB8500_SPI2, pdata, 0)
+#define db8500_add_spi3(parent, pdata) \
+	dbx500_add_spi(parent, "spi3", U8500_SPI3_BASE, \
+		       IRQ_DB8500_SPI3, pdata, 0)
+
+#define db8500_add_uart0(parent, pdata) \
+	dbx500_add_uart(parent, "uart0", U8500_UART0_BASE, \
+			IRQ_DB8500_UART0, pdata)
+#define db8500_add_uart1(parent, pdata) \
+	dbx500_add_uart(parent, "uart1", U8500_UART1_BASE, \
+			IRQ_DB8500_UART1, pdata)
+#define db8500_add_uart2(parent, pdata) \
+	dbx500_add_uart(parent, "uart2", U8500_UART2_BASE, \
+			IRQ_DB8500_UART2, pdata)
 
 #endif
diff --git a/arch/arm/mach-ux500/dma-db5500.c b/arch/arm/mach-ux500/dma-db5500.c
index 1cfab68..41e9470 100644
--- a/arch/arm/mach-ux500/dma-db5500.c
+++ b/arch/arm/mach-ux500/dma-db5500.c
@@ -125,10 +125,11 @@ static struct platform_device dma40_device = {
 	.resource	= dma40_resources
 };
 
-void __init db5500_dma_init(void)
+void __init db5500_dma_init(struct device *parent)
 {
 	int ret;
 
+	dma40_device.dev.parent = parent;
 	ret = platform_device_register(&dma40_device);
 	if (ret)
 		dev_err(&dma40_device.dev, "unable to register device: %d\n", ret);
diff --git a/arch/arm/mach-ux500/include/mach/setup.h b/arch/arm/mach-ux500/include/mach/setup.h
index a7d363f..e46b8b1 100644
--- a/arch/arm/mach-ux500/include/mach/setup.h
+++ b/arch/arm/mach-ux500/include/mach/setup.h
@@ -18,14 +18,14 @@ void __init ux500_map_io(void);
 extern void __init u5500_map_io(void);
 extern void __init u8500_map_io(void);
 
-extern void __init u5500_init_devices(void);
-extern void __init u8500_init_devices(void);
+extern struct device * __init u5500_init_devices(void);
+extern struct device * __init u8500_init_devices(void);
 
 extern void __init ux500_init_irq(void);
 
-extern void __init u5500_sdi_init(void);
+extern void __init u5500_sdi_init(struct device *parent);
 
-extern void __init db5500_dma_init(void);
+extern void __init db5500_dma_init(struct device *parent);
 
 /* We re-use nomadik_timer for this platform */
 extern void nmdk_timer_init(void);
diff --git a/arch/arm/mach-ux500/include/mach/usb.h b/arch/arm/mach-ux500/include/mach/usb.h
index d3739d4..4c1cc50 100644
--- a/arch/arm/mach-ux500/include/mach/usb.h
+++ b/arch/arm/mach-ux500/include/mach/usb.h
@@ -20,6 +20,6 @@ struct ux500_musb_board_data {
 	bool (*dma_filter)(struct dma_chan *chan, void *filter_param);
 };
 
-void ux500_add_usb(resource_size_t base, int irq, int *dma_rx_cfg,
-	int *dma_tx_cfg);
+void ux500_add_usb(struct device *parent, resource_size_t base,
+		   int irq, int *dma_rx_cfg, int *dma_tx_cfg);
 #endif
diff --git a/arch/arm/mach-ux500/usb.c b/arch/arm/mach-ux500/usb.c
index 0a01cbd..bef6a31 100644
--- a/arch/arm/mach-ux500/usb.c
+++ b/arch/arm/mach-ux500/usb.c
@@ -146,8 +146,8 @@ static inline void ux500_usb_dma_update_tx_ch_config(int *dst_dev_type)
 		musb_dma_tx_ch[idx].dst_dev_type = dst_dev_type[idx];
 }
 
-void ux500_add_usb(resource_size_t base, int irq, int *dma_rx_cfg,
-	int *dma_tx_cfg)
+void ux500_add_usb(struct device *parent, resource_size_t base, int irq,
+		   int *dma_rx_cfg, int *dma_tx_cfg)
 {
 	ux500_musb_device.resource[0].start = base;
 	ux500_musb_device.resource[0].end = base + SZ_64K - 1;
-- 
1.7.5.4

[PATCH 2/6] drivers/base: add bus for System-on-Chip devices

[Lee Jones]

Traditionally, any System-on-Chip based platform creates a flat list
of platform_devices directly under /sys/devices/platform.

In order to give these some better structure, this introduces a new
bus type for soc_devices that are registered with the new
soc_device_register() function.  All devices that are on the same
chip should then be registered as child devices of the soc device.

The soc bus also exports a few standardised device attributes which
allow user space to query the specific type of soc.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 drivers/base/Kconfig    |    3 +
 drivers/base/Makefile   |    1 +
 drivers/base/soc.c      |  185 +++++++++++++++++++++++++++++++++++++++++++++++
 include/linux/sys_soc.h |   37 ++++++++++
 4 files changed, 226 insertions(+), 0 deletions(-)
 create mode 100644 drivers/base/soc.c
 create mode 100644 include/linux/sys_soc.h

diff --git a/drivers/base/Kconfig b/drivers/base/Kconfig
index 7be9f79..9aa618a 100644
--- a/drivers/base/Kconfig
+++ b/drivers/base/Kconfig
@@ -176,6 +176,9 @@ config GENERIC_CPU_DEVICES
 	bool
 	default n
 
+config SOC_BUS
+	bool
+
 source "drivers/base/regmap/Kconfig"
 
 config DMA_SHARED_BUFFER
diff --git a/drivers/base/Makefile b/drivers/base/Makefile
index 2c8272d..4f302a6 100644
--- a/drivers/base/Makefile
+++ b/drivers/base/Makefile
@@ -19,6 +19,7 @@ obj-$(CONFIG_MODULES)	+= module.o
 endif
 obj-$(CONFIG_SYS_HYPERVISOR) += hypervisor.o
 obj-$(CONFIG_REGMAP)	+= regmap/
+obj-$(CONFIG_SOC_BUS) += soc.o
 
 ccflags-$(CONFIG_DEBUG_DRIVER) := -DDEBUG
 
diff --git a/drivers/base/soc.c b/drivers/base/soc.c
new file mode 100644
index 0000000..0c9e350
--- /dev/null
+++ b/drivers/base/soc.c
@@ -0,0 +1,185 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2011
+ *
+ * Author: Lee Jones <lee.jones@linaro.org> for ST-Ericsson.
+ * License terms:  GNU General Public License (GPL), version 2
+ */
+
+#include <linux/sysfs.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/stat.h>
+#include <linux/slab.h>
+#include <linux/idr.h>
+#include <linux/spinlock.h>
+#include <linux/sys_soc.h>
+#include <linux/err.h>
+
+static struct ida soc_ida;
+static spinlock_t soc_lock;
+
+static ssize_t soc_info_get(struct device *dev,
+			    struct device_attribute *attr,
+			    char *buf);
+
+struct soc_device {
+	struct device dev;
+	struct soc_device_attribute *attr;
+	int soc_dev_num;
+};
+
+static struct bus_type soc_bus_type = {
+	.name  = "soc",
+};
+
+static DEVICE_ATTR(machine,  S_IRUGO, soc_info_get,  NULL);
+static DEVICE_ATTR(family,   S_IRUGO, soc_info_get,  NULL);
+static DEVICE_ATTR(soc_id,   S_IRUGO, soc_info_get,  NULL);
+static DEVICE_ATTR(revision, S_IRUGO, soc_info_get,  NULL);
+
+struct device *soc_device_to_device(struct soc_device *soc_dev)
+{
+	return &soc_dev->dev;
+}
+
+static mode_t soc_attribute_mode(struct kobject *kobj,
+                                 struct attribute *attr,
+                                 int index)
+{
+	struct device *dev = container_of(kobj, struct device, kobj);
+	struct soc_device *soc_dev = container_of(dev, struct soc_device, dev);
+
+	if ((attr == &dev_attr_machine.attr)
+	    && (soc_dev->attr->machine != NULL))
+		return attr->mode;
+	if ((attr == &dev_attr_family.attr)
+	    && (soc_dev->attr->family != NULL))
+		return attr->mode;
+	if ((attr == &dev_attr_revision.attr)
+	    && (soc_dev->attr->revision != NULL))
+		return attr->mode;
+	if ((attr == &dev_attr_soc_id.attr)
+	    && (soc_dev->attr->soc_id != NULL))
+	        return attr->mode;
+
+	/* Unknown or unfilled attribute. */
+	return 0;
+}
+
+static ssize_t soc_info_get(struct device *dev,
+			    struct device_attribute *attr,
+			    char *buf)
+{
+	struct soc_device *soc_dev = container_of(dev, struct soc_device, dev);
+
+	if (attr == &dev_attr_machine)
+		return sprintf(buf, "%s\n", soc_dev->attr->machine);
+	if (attr == &dev_attr_family)
+		return sprintf(buf, "%s\n", soc_dev->attr->family);
+	if (attr == &dev_attr_revision)
+		return sprintf(buf, "%s\n", soc_dev->attr->revision);
+	if (attr == &dev_attr_soc_id)
+		return sprintf(buf, "%s\n", soc_dev->attr->soc_id);
+
+	return -EINVAL;
+
+}
+
+static struct attribute *soc_attr[] = {
+	&dev_attr_machine.attr,
+	&dev_attr_family.attr,
+	&dev_attr_soc_id.attr,
+	&dev_attr_revision.attr,
+	NULL,
+};
+
+static const struct attribute_group soc_attr_group = {
+	.attrs = soc_attr,
+	.is_visible = soc_attribute_mode,
+};
+
+static const struct attribute_group *soc_attr_groups[] = {
+	&soc_attr_group,
+	NULL,
+};
+
+static void soc_release(struct device *dev)
+{
+	struct soc_device *soc_dev = container_of(dev, struct soc_device, dev);
+
+	kfree(soc_dev);
+}
+
+struct soc_device *soc_device_register(struct soc_device_attribute *soc_dev_attr)
+{
+	struct soc_device *soc_dev;
+	int ret;
+
+	soc_dev = kzalloc(sizeof(*soc_dev), GFP_KERNEL);
+	if (!soc_dev) {
+	        ret = -ENOMEM;
+		goto out1;
+	}
+
+	/* Fetch a unique (reclaimable) SOC ID. */
+	do {
+		if (!ida_pre_get(&soc_ida, GFP_KERNEL)) {
+			ret = -ENOMEM;
+			goto out2;
+		}
+
+		spin_lock(&soc_lock);
+		ret = ida_get_new(&soc_ida, &soc_dev->soc_dev_num);
+		spin_unlock(&soc_lock);
+
+	} while (ret == -EAGAIN);
+
+	if (ret)
+	         goto out2;
+
+	soc_dev->attr = soc_dev_attr;
+	soc_dev->dev.bus = &soc_bus_type;
+	soc_dev->dev.groups = soc_attr_groups;
+	soc_dev->dev.release = soc_release;
+
+	dev_set_name(&soc_dev->dev, "soc%d", soc_dev->soc_dev_num);
+
+	ret = device_register(&soc_dev->dev);
+	if (ret)
+		goto out3;
+
+	return soc_dev;
+
+out3:
+	ida_remove(&soc_ida, soc_dev->soc_dev_num);
+out2:
+	kfree(soc_dev);
+out1:
+	return ERR_PTR(ret);
+}
+
+/* Ensure soc_dev->attr is freed prior to calling soc_device_unregister. */
+void soc_device_unregister(struct soc_device *soc_dev)
+{
+	ida_remove(&soc_ida, soc_dev->soc_dev_num);
+
+	device_unregister(&soc_dev->dev);
+}
+
+static int __init soc_bus_register(void)
+{
+	spin_lock_init(&soc_lock);
+
+	ida_init(&soc_ida);
+
+	return bus_register(&soc_bus_type);
+}
+core_initcall(soc_bus_register);
+
+static void __exit soc_bus_unregister(void)
+{
+	ida_destroy(&soc_ida);
+
+	bus_unregister(&soc_bus_type);
+}
+module_exit(soc_bus_unregister);
diff --git a/include/linux/sys_soc.h b/include/linux/sys_soc.h
new file mode 100644
index 0000000..2739ccb
--- /dev/null
+++ b/include/linux/sys_soc.h
@@ -0,0 +1,37 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2011
+ * Author: Lee Jones <lee.jones@linaro.org> for ST-Ericsson.
+ * License terms:  GNU General Public License (GPL), version 2
+ */
+#ifndef __SOC_BUS_H
+#define __SOC_BUS_H
+
+#include <linux/device.h>
+
+struct soc_device_attribute {
+	const char *machine;
+	const char *family;
+	const char *revision;
+	const char *soc_id;
+};
+
+/**
+ * soc_device_register - register SoC as a device
+ * @soc_plat_dev_attr: Attributes passed from platform to be attributed to a SoC
+ */
+struct soc_device *soc_device_register(
+	struct soc_device_attribute *soc_plat_dev_attr);
+
+/**
+ * soc_device_unregister - unregister SoC device
+ * @dev: SoC device to be unregistered
+ */
+void soc_device_unregister(struct soc_device *soc_dev);
+
+/**
+ * soc_device_to_device - helper function to fetch struct device
+ * @soc: Previously registered SoC device container
+ */
+struct device *soc_device_to_device(struct soc_device *soc);
+
+#endif /* __SOC_BUS_H */
-- 
1.7.5.4

[PATCH 2/6] drivers/base: add bus for System-on-Chip devices

[Greg KH]

On Sat, Jan 21, 2012 at 05:08:03PM +0000, Lee Jones wrote:
> Traditionally, any System-on-Chip based platform creates a flat list
> of platform_devices directly under /sys/devices/platform.
> 
> In order to give these some better structure, this introduces a new
> bus type for soc_devices that are registered with the new
> soc_device_register() function.  All devices that are on the same
> chip should then be registered as child devices of the soc device.
> 
> The soc bus also exports a few standardised device attributes which
> allow user space to query the specific type of soc.
> 
> Signed-off-by: Lee Jones <lee.jones@linaro.org>
> ---
>  drivers/base/Kconfig    |    3 +
>  drivers/base/Makefile   |    1 +
>  drivers/base/soc.c      |  185 +++++++++++++++++++++++++++++++++++++++++++++++
>  include/linux/sys_soc.h |   37 ++++++++++
>  4 files changed, 226 insertions(+), 0 deletions(-)
>  create mode 100644 drivers/base/soc.c
>  create mode 100644 include/linux/sys_soc.h
> 
> diff --git a/drivers/base/Kconfig b/drivers/base/Kconfig
> index 7be9f79..9aa618a 100644
> --- a/drivers/base/Kconfig
> +++ b/drivers/base/Kconfig
> @@ -176,6 +176,9 @@ config GENERIC_CPU_DEVICES
>  	bool
>  	default n
>  
> +config SOC_BUS
> +	bool

That's nice, but you do need some kind of help text here, right?

> +
>  source "drivers/base/regmap/Kconfig"
>  
>  config DMA_SHARED_BUFFER
> diff --git a/drivers/base/Makefile b/drivers/base/Makefile
> index 2c8272d..4f302a6 100644
> --- a/drivers/base/Makefile
> +++ b/drivers/base/Makefile
> @@ -19,6 +19,7 @@ obj-$(CONFIG_MODULES)	+= module.o
>  endif
>  obj-$(CONFIG_SYS_HYPERVISOR) += hypervisor.o
>  obj-$(CONFIG_REGMAP)	+= regmap/
> +obj-$(CONFIG_SOC_BUS) += soc.o
>  
>  ccflags-$(CONFIG_DEBUG_DRIVER) := -DDEBUG
>  
> diff --git a/drivers/base/soc.c b/drivers/base/soc.c
> new file mode 100644
> index 0000000..0c9e350
> --- /dev/null
> +++ b/drivers/base/soc.c
> @@ -0,0 +1,185 @@
> +/*
> + * Copyright (C) ST-Ericsson SA 2011
> + *
> + * Author: Lee Jones <lee.jones@linaro.org> for ST-Ericsson.
> + * License terms:  GNU General Public License (GPL), version 2
> + */
> +
> +#include <linux/sysfs.h>
> +#include <linux/module.h>
> +#include <linux/init.h>
> +#include <linux/stat.h>
> +#include <linux/slab.h>
> +#include <linux/idr.h>
> +#include <linux/spinlock.h>
> +#include <linux/sys_soc.h>
> +#include <linux/err.h>
> +
> +static struct ida soc_ida;
> +static spinlock_t soc_lock;
> +
> +static ssize_t soc_info_get(struct device *dev,
> +			    struct device_attribute *attr,
> +			    char *buf);
> +

Why not put the whole function here, well a few lines lower, so no
forward declaration is needed, saving a few extra lines.

> +struct soc_device {
> +	struct device dev;
> +	struct soc_device_attribute *attr;

const?

> +	int soc_dev_num;

Why is this needed?  What's wrong with dev->id?

> +};
> +
> +static struct bus_type soc_bus_type = {
> +	.name  = "soc",
> +};
> +

Put the function here.

> +static DEVICE_ATTR(machine,  S_IRUGO, soc_info_get,  NULL);
> +static DEVICE_ATTR(family,   S_IRUGO, soc_info_get,  NULL);
> +static DEVICE_ATTR(soc_id,   S_IRUGO, soc_info_get,  NULL);
> +static DEVICE_ATTR(revision, S_IRUGO, soc_info_get,  NULL);
> +
> +struct device *soc_device_to_device(struct soc_device *soc_dev)
> +{
> +	return &soc_dev->dev;
> +}

Why is this even needed?  Who cares about this?

> +
> +static mode_t soc_attribute_mode(struct kobject *kobj,
> +                                 struct attribute *attr,
> +                                 int index)
> +{
> +	struct device *dev = container_of(kobj, struct device, kobj);
> +	struct soc_device *soc_dev = container_of(dev, struct soc_device, dev);
> +
> +	if ((attr == &dev_attr_machine.attr)
> +	    && (soc_dev->attr->machine != NULL))
> +		return attr->mode;
> +	if ((attr == &dev_attr_family.attr)
> +	    && (soc_dev->attr->family != NULL))
> +		return attr->mode;
> +	if ((attr == &dev_attr_revision.attr)
> +	    && (soc_dev->attr->revision != NULL))
> +		return attr->mode;
> +	if ((attr == &dev_attr_soc_id.attr)
> +	    && (soc_dev->attr->soc_id != NULL))
> +	        return attr->mode;
> +
> +	/* Unknown or unfilled attribute. */
> +	return 0;
> +}
> +
> +static ssize_t soc_info_get(struct device *dev,
> +			    struct device_attribute *attr,
> +			    char *buf)
> +{
> +	struct soc_device *soc_dev = container_of(dev, struct soc_device, dev);
> +
> +	if (attr == &dev_attr_machine)
> +		return sprintf(buf, "%s\n", soc_dev->attr->machine);
> +	if (attr == &dev_attr_family)
> +		return sprintf(buf, "%s\n", soc_dev->attr->family);
> +	if (attr == &dev_attr_revision)
> +		return sprintf(buf, "%s\n", soc_dev->attr->revision);
> +	if (attr == &dev_attr_soc_id)
> +		return sprintf(buf, "%s\n", soc_dev->attr->soc_id);
> +
> +	return -EINVAL;
> +
> +}
> +
> +static struct attribute *soc_attr[] = {
> +	&dev_attr_machine.attr,
> +	&dev_attr_family.attr,
> +	&dev_attr_soc_id.attr,
> +	&dev_attr_revision.attr,
> +	NULL,
> +};
> +
> +static const struct attribute_group soc_attr_group = {
> +	.attrs = soc_attr,
> +	.is_visible = soc_attribute_mode,

Nice, now wasn't that easier?   :)

> +};
> +
> +static const struct attribute_group *soc_attr_groups[] = {
> +	&soc_attr_group,
> +	NULL,
> +};
> +
> +static void soc_release(struct device *dev)
> +{
> +	struct soc_device *soc_dev = container_of(dev, struct soc_device, dev);
> +
> +	kfree(soc_dev);
> +}
> +
> +struct soc_device *soc_device_register(struct soc_device_attribute *soc_dev_attr)
> +{
> +	struct soc_device *soc_dev;
> +	int ret;
> +
> +	soc_dev = kzalloc(sizeof(*soc_dev), GFP_KERNEL);
> +	if (!soc_dev) {
> +	        ret = -ENOMEM;
> +		goto out1;
> +	}
> +
> +	/* Fetch a unique (reclaimable) SOC ID. */
> +	do {
> +		if (!ida_pre_get(&soc_ida, GFP_KERNEL)) {
> +			ret = -ENOMEM;
> +			goto out2;
> +		}
> +
> +		spin_lock(&soc_lock);
> +		ret = ida_get_new(&soc_ida, &soc_dev->soc_dev_num);
> +		spin_unlock(&soc_lock);
> +
> +	} while (ret == -EAGAIN);
> +
> +	if (ret)
> +	         goto out2;
> +
> +	soc_dev->attr = soc_dev_attr;
> +	soc_dev->dev.bus = &soc_bus_type;
> +	soc_dev->dev.groups = soc_attr_groups;
> +	soc_dev->dev.release = soc_release;
> +
> +	dev_set_name(&soc_dev->dev, "soc%d", soc_dev->soc_dev_num);
> +
> +	ret = device_register(&soc_dev->dev);
> +	if (ret)
> +		goto out3;
> +
> +	return soc_dev;
> +
> +out3:
> +	ida_remove(&soc_ida, soc_dev->soc_dev_num);
> +out2:
> +	kfree(soc_dev);
> +out1:
> +	return ERR_PTR(ret);
> +}
> +
> +/* Ensure soc_dev->attr is freed prior to calling soc_device_unregister. */
> +void soc_device_unregister(struct soc_device *soc_dev)
> +{
> +	ida_remove(&soc_ida, soc_dev->soc_dev_num);
> +
> +	device_unregister(&soc_dev->dev);
> +}
> +
> +static int __init soc_bus_register(void)
> +{
> +	spin_lock_init(&soc_lock);
> +
> +	ida_init(&soc_ida);
> +
> +	return bus_register(&soc_bus_type);
> +}
> +core_initcall(soc_bus_register);
> +
> +static void __exit soc_bus_unregister(void)
> +{
> +	ida_destroy(&soc_ida);
> +
> +	bus_unregister(&soc_bus_type);
> +}
> +module_exit(soc_bus_unregister);
> diff --git a/include/linux/sys_soc.h b/include/linux/sys_soc.h
> new file mode 100644
> index 0000000..2739ccb
> --- /dev/null
> +++ b/include/linux/sys_soc.h
> @@ -0,0 +1,37 @@
> +/*
> + * Copyright (C) ST-Ericsson SA 2011
> + * Author: Lee Jones <lee.jones@linaro.org> for ST-Ericsson.
> + * License terms:  GNU General Public License (GPL), version 2
> + */
> +#ifndef __SOC_BUS_H
> +#define __SOC_BUS_H
> +
> +#include <linux/device.h>
> +
> +struct soc_device_attribute {
> +	const char *machine;
> +	const char *family;
> +	const char *revision;
> +	const char *soc_id;
> +};
> +
> +/**
> + * soc_device_register - register SoC as a device
> + * @soc_plat_dev_attr: Attributes passed from platform to be attributed to a SoC
> + */
> +struct soc_device *soc_device_register(
> +	struct soc_device_attribute *soc_plat_dev_attr);

const?

> +
> +/**
> + * soc_device_unregister - unregister SoC device
> + * @dev: SoC device to be unregistered
> + */
> +void soc_device_unregister(struct soc_device *soc_dev);

We need more documentation for these functions.

> +
> +/**
> + * soc_device_to_device - helper function to fetch struct device
> + * @soc: Previously registered SoC device container
> + */
> +struct device *soc_device_to_device(struct soc_device *soc);

Is the reference count incremented when this is called?  Why is this
needed at all anyway?


Overall, much nicer, but we need more documentation on how to use this
properly, and what exactly it does.

You are almost there :)

thanks,

greg k-h

[PATCH 2/6] drivers/base: add bus for System-on-Chip devices

[Arnd Bergmann]

On Saturday 28 January 2012, Greg KH wrote:
> On Sat, Jan 21, 2012 at 05:08:03PM +0000, Lee Jones wrote:
> > diff --git a/drivers/base/Kconfig b/drivers/base/Kconfig
> > index 7be9f79..9aa618a 100644
> > --- a/drivers/base/Kconfig
> > +++ b/drivers/base/Kconfig
> > @@ -176,6 +176,9 @@ config GENERIC_CPU_DEVICES
> >  	bool
> >  	default n
> >  
> > +config SOC_BUS
> > +	bool
> 
> That's nice, but you do need some kind of help text here, right?

Wouldn't hurt, but most silent options have no help text, because that
would never be visible in the kconfig tools, only in the source code.

> > +
> > +static struct ida soc_ida;
> > +static spinlock_t soc_lock;
> > +
> > +static ssize_t soc_info_get(struct device *dev,
> > +			    struct device_attribute *attr,
> > +			    char *buf);
> > +
> 
> Why not put the whole function here, well a few lines lower, so no
> forward declaration is needed, saving a few extra lines.

You made the same comment in a previous review round and then agreed
that it's correct after all. A small comment why the forward declaration
is required here would probably be appropriate here, otherwise the
next person reading this would have the same thought.

> > +
> > +static mode_t soc_attribute_mode(struct kobject *kobj,
> > +                                 struct attribute *attr,
> > +                                 int index)
> > +{
> > +	struct device *dev = container_of(kobj, struct device, kobj);
> > +	struct soc_device *soc_dev = container_of(dev, struct soc_device, dev);
> > +
> > +	if ((attr == &dev_attr_machine.attr)
> > +	    && (soc_dev->attr->machine != NULL))
> > +		return attr->mode;
> > +	if ((attr == &dev_attr_family.attr)
> > +	    && (soc_dev->attr->family != NULL))
> > +		return attr->mode;
> > +	if ((attr == &dev_attr_revision.attr)
> > +	    && (soc_dev->attr->revision != NULL))
> > +		return attr->mode;
> > +	if ((attr == &dev_attr_soc_id.attr)
> > +	    && (soc_dev->attr->soc_id != NULL))
> > +	        return attr->mode;
> > +

FWIW, the function compares the attribute pointers, so it needs to
see their delarations, while the attribute definition requires the
declaration of the function to be visible.

	Arnd

[PATCH 2/6] drivers/base: add bus for System-on-Chip devices

[Greg KH]

On Mon, Jan 30, 2012 at 05:58:24PM +0000, Arnd Bergmann wrote:
> On Saturday 28 January 2012, Greg KH wrote:
> > On Sat, Jan 21, 2012 at 05:08:03PM +0000, Lee Jones wrote:
> > > diff --git a/drivers/base/Kconfig b/drivers/base/Kconfig
> > > index 7be9f79..9aa618a 100644
> > > --- a/drivers/base/Kconfig
> > > +++ b/drivers/base/Kconfig
> > > @@ -176,6 +176,9 @@ config GENERIC_CPU_DEVICES
> > >  	bool
> > >  	default n
> > >  
> > > +config SOC_BUS
> > > +	bool
> > 
> > That's nice, but you do need some kind of help text here, right?
> 
> Wouldn't hurt, but most silent options have no help text, because that
> would never be visible in the kconfig tools, only in the source code.

Ah, it's being set by others, ok, that's fine.

> > > +static struct ida soc_ida;
> > > +static spinlock_t soc_lock;
> > > +
> > > +static ssize_t soc_info_get(struct device *dev,
> > > +			    struct device_attribute *attr,
> > > +			    char *buf);
> > > +
> > 
> > Why not put the whole function here, well a few lines lower, so no
> > forward declaration is needed, saving a few extra lines.
> 
> You made the same comment in a previous review round and then agreed
> that it's correct after all. A small comment why the forward declaration
> is required here would probably be appropriate here, otherwise the
> next person reading this would have the same thought.

Heh, at least I'm consistant with my requests :)

And yes, you are right, this is fine, a small comment would be good to
have so that I don't make the same review comment the next time around.

thanks,

greg k-h

[PATCH 3/6] Documentation: add information for new sysfs soc bus functionality

[Lee Jones]

This change applies the required documentation for each new
attribute recenty added by the new System-On-Chip (SoC)
information export bus driver.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 Documentation/ABI/testing/sysfs-devices-soc |   58 +++++++++++++++++++++++++++
 1 files changed, 58 insertions(+), 0 deletions(-)
 create mode 100644 Documentation/ABI/testing/sysfs-devices-soc

diff --git a/Documentation/ABI/testing/sysfs-devices-soc b/Documentation/ABI/testing/sysfs-devices-soc
new file mode 100644
index 0000000..6d9cc25
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-devices-soc
@@ -0,0 +1,58 @@
+What:		/sys/devices/socX
+Date:		January 2012
+contact:	Lee Jones <lee.jones@linaro.org>
+Description:
+		The /sys/devices/ directory contains a sub-directory for each
+		System-on-Chip (SoC) device on a running platform. Information
+		regarding each SoC can be obtained by reading sysfs files. This
+		functionality is only available if implemented by the platform.
+
+		The directory created for each SoC will also house information
+		about devices which are commonly contained in /sys/devices/platform.
+		It has been agreed that if an SoC device exists, its supported
+		devices would be better suited to appear as children of that SoC.
+
+What:		/sys/devices/socX/machine
+Date:		January 2012
+contact:	Lee Jones <lee.jones@linaro.org>
+Description:
+		Read-only attribute common to all SoCs. Contains the SoC machine
+		name (e.g. Ux500).
+
+What:		/sys/devices/socX/family
+Date:		January 2012
+contact:	Lee Jones <lee.jones@linaro.org>
+Description:
+		Read-only attribute common to all SoCs. Contains SoC family name
+		(e.g. DB8500).
+
+What:		/sys/devices/socX/soc_id
+Date:		January 2012
+contact:	Lee Jones <lee.jones@linaro.org>
+Description:
+		Read-only attribute supported by most SoCs. In the case of
+		ST-Ericsson's chips this contains the SoC serial number.
+
+What:		/sys/devices/socX/revision
+Date:		January 2012
+contact:	Lee Jones <lee.jones@linaro.org>
+Description:
+		Read-only attribute supported by most SoCs. Contains the SoC's
+		manufacturing revision number.
+
+What:		/sys/devices/socX/process
+Date:		January 2012
+contact:	Lee Jones <lee.jones@linaro.org>
+Description:
+		Read-only attribute supported ST-Ericsson's silicon. Contains the
+		the process by which the silicon chip was manufactured.
+
+What:		/sys/bus/soc
+Date:		January 2012
+contact:	Lee Jones <lee.jones@linaro.org>
+Description:
+		The /sys/bus/soc/ directory contains the usual sub-folders
+		expected under most buses. /sys/bus/soc/devices is of particular
+		interest, as it contains a symlink for each SoC device found on
+		the system. Each symlink points back into the aforementioned
+		/sys/devices/socX devices.
-- 
1.7.5.4

[PATCH 4/6] mach-ux500: export System-on-Chip information ux500 via sysfs

[Lee Jones]

Here we make use of the new System-On-Chip bus driver to export
vital SoC information out to userspace via sysfs. This patch
provides a data structure of strings to populate the base
nodes found in:

/sys/devices/soc[0|1|2|...]/[family|machine|revision|soc_id].

It also adds one more node as requested by ST-Ericsson.
'process' depicts the way in which the silicon was manufactured.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 arch/arm/mach-ux500/Kconfig                    |    1 +
 arch/arm/mach-ux500/cpu-db5500.c               |   30 +++++++---
 arch/arm/mach-ux500/cpu-db8500.c               |   33 +++++++++--
 arch/arm/mach-ux500/cpu.c                      |   75 ++++++++++++++++++++++++
 arch/arm/mach-ux500/include/mach/db8500-regs.h |    3 +
 arch/arm/mach-ux500/include/mach/setup.h       |    2 +
 6 files changed, 130 insertions(+), 14 deletions(-)

diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig
index a3e0c86..ce8bac2 100644
--- a/arch/arm/mach-ux500/Kconfig
+++ b/arch/arm/mach-ux500/Kconfig
@@ -27,6 +27,7 @@ config MACH_U8500
 	bool "U8500 Development platform"
 	depends on UX500_SOC_DB8500
 	select TPS6105X
+	select SOC_BUS
 	help
 	  Include support for the mop500 development platform.
 
diff --git a/arch/arm/mach-ux500/cpu-db5500.c b/arch/arm/mach-ux500/cpu-db5500.c
index c402fd6..8f8acfd 100644
--- a/arch/arm/mach-ux500/cpu-db5500.c
+++ b/arch/arm/mach-ux500/cpu-db5500.c
@@ -212,18 +212,32 @@ static int usb_db5500_tx_dma_cfg[] = {
 	DB5500_DMA_DEV38_USB_OTG_OEP_8
 };
 
-struct device* __init u5500_init_devices(void)
+static const char *db5500_read_soc_id(void)
 {
-	/* FIXME: First parameter to be a real parent. */
-	db5500_add_gpios(NULL);
+	return kasprintf(GFP_KERNEL, "u5500 currently unsupported\n");
+}
+
+static struct device * __init db5500_soc_device_init(void)
+{
+	const char *soc_id = db5500_read_soc_id();
+
+	return ux500_soc_device_init(soc_id);
+}
+
+struct device * __init u5500_init_devices(void)
+{
+	struct device *parent;
+
+	parent = db5500_soc_device_init();
+
+	db5500_add_gpios(parent);
 	db5500_pmu_init();
-	db5500_dma_init(NULL);
-	db5500_add_rtc(NULL);
-	db5500_add_usb(NULL, usb_db5500_rx_dma_cfg, usb_db5500_tx_dma_cfg);
+	db5500_dma_init(parent);
+	db5500_add_rtc(parent);
+	db5500_add_usb(parent, usb_db5500_rx_dma_cfg, usb_db5500_tx_dma_cfg);
 
 	platform_add_devices(db5500_platform_devs,
 			     ARRAY_SIZE(db5500_platform_devs));
 
-	/* FIXME: Return value to be a real parent. */
-	return NULL;
+	return parent;
 }
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index 1e8a2cb..afcde3d 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -24,6 +24,7 @@
 #include <mach/setup.h>
 #include <mach/devices.h>
 #include <mach/usb.h>
+#include <mach/db8500-regs.h>
 
 #include "devices-db8500.h"
 #include "ste-dma40-db8500.h"
@@ -164,18 +165,38 @@ static int usb_db8500_tx_dma_cfg[] = {
 	DB8500_DMA_DEV39_USB_OTG_OEP_8
 };
 
+static const char *db8500_read_soc_id(void)
+{
+	void __iomem *uid = __io_address(U8500_BB_UID_BASE);
+
+	return kasprintf(GFP_KERNEL, "%08x%08x%08x%08x%08x",
+			 readl((u32 *)uid+1),
+			 readl((u32 *)uid+1), readl((u32 *)uid+2),
+			 readl((u32 *)uid+3), readl((u32 *)uid+4));
+}
+
+static struct device * __init db8500_soc_device_init(void)
+{
+	const char *soc_id = db8500_read_soc_id();
+
+	return ux500_soc_device_init(soc_id);
+}
+
 /*
  * This function is called from the board init
  */
-struct device* __init u8500_init_devices(void)
+struct device * __init u8500_init_devices(void)
 {
-	db8500_add_rtc(NULL);
-	db8500_add_gpios(NULL);
-	db8500_add_usb(NULL, usb_db8500_rx_dma_cfg, usb_db8500_tx_dma_cfg);
+	struct device *parent;
+
+	parent = db8500_soc_device_init();
+
+	db8500_add_rtc(parent);
+	db8500_add_gpios(parent);
+	db8500_add_usb(parent, usb_db8500_rx_dma_cfg, usb_db8500_tx_dma_cfg);
 
 	platform_device_register_simple("cpufreq-u8500", -1, NULL, 0);
 	platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs));
 
-	/* FIXME: Return value to be a real parent. */
-	return NULL;
+	return parent;
 }
diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c
index f418574..055fb6e 100644
--- a/arch/arm/mach-ux500/cpu.c
+++ b/arch/arm/mach-ux500/cpu.c
@@ -2,6 +2,7 @@
  * Copyright (C) ST-Ericsson SA 2010
  *
  * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
+ * Author: Lee Jones <lee.jones@linaro.org> for ST-Ericsson
  * License terms: GNU General Public License (GPL) version 2
  */
 
@@ -11,6 +12,10 @@
 #include <linux/mfd/db8500-prcmu.h>
 #include <linux/mfd/db5500-prcmu.h>
 #include <linux/clksrc-dbx500-prcmu.h>
+#include <linux/sys_soc.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/stat.h>
 
 #include <asm/hardware/gic.h>
 #include <asm/mach/map.h>
@@ -50,3 +55,73 @@ void __init ux500_init_irq(void)
 		db8500_prcmu_early_init();
 	clk_init();
 }
+
+static const char * __init ux500_get_machine(void)
+{
+	return kasprintf(GFP_KERNEL, "DB%4x", dbx500_partnumber());
+}
+
+static const char * __init ux500_get_family(void)
+{
+	return kasprintf(GFP_KERNEL, "ux500");
+}
+
+static const char * __init ux500_get_revision(void)
+{
+	unsigned int rev = dbx500_revision();
+
+	if (rev == 0x01)
+		return kasprintf(GFP_KERNEL, "%s", "ED");
+	else if (rev >= 0xA0)
+		return kasprintf(GFP_KERNEL, "%d.%d",
+				 (rev >> 4) - 0xA + 1, rev & 0xf);
+
+	return kasprintf(GFP_KERNEL, "%s", "Unknown");
+}
+
+static ssize_t ux500_get_process(struct device *dev,
+					struct device_attribute *attr,
+					char *buf)
+{
+	if (dbx500_id.process == 0x00)
+		return sprintf(buf, "Standard\n");
+
+	return sprintf(buf, "%02xnm\n", dbx500_id.process);
+}
+
+static void __init soc_info_populate(struct soc_device_attribute *soc_dev_attr,
+				     const char *soc_id)
+{
+	soc_dev_attr->soc_id   = soc_id;
+	soc_dev_attr->machine  = ux500_get_machine();
+	soc_dev_attr->family   = ux500_get_family();
+	soc_dev_attr->revision = ux500_get_revision();
+}
+
+struct device_attribute ux500_soc_attr =
+	__ATTR(process,  S_IRUGO, ux500_get_process,  NULL);
+
+struct device * __init ux500_soc_device_init(const char *soc_id)
+{
+	struct device *parent;
+	struct soc_device *soc_dev;
+	struct soc_device_attribute *soc_dev_attr;
+
+	soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
+	if (!soc_dev_attr)
+		return ERR_PTR(-ENOMEM);
+
+	soc_info_populate(soc_dev_attr, soc_id);
+
+	soc_dev = soc_device_register(soc_dev_attr);
+	if (IS_ERR_OR_NULL(soc_dev)) {
+	        kfree(soc_dev_attr);
+		return NULL;
+	}
+
+	parent = soc_device_to_device(soc_dev);
+	if (!IS_ERR_OR_NULL(parent))
+		device_create_file(parent, &ux500_soc_attr);
+
+	return parent;
+}
diff --git a/arch/arm/mach-ux500/include/mach/db8500-regs.h b/arch/arm/mach-ux500/include/mach/db8500-regs.h
index 80e10f5..9ec20b9 100644
--- a/arch/arm/mach-ux500/include/mach/db8500-regs.h
+++ b/arch/arm/mach-ux500/include/mach/db8500-regs.h
@@ -161,4 +161,7 @@
 #define U8500_MODEM_BASE	0xe000000
 #define U8500_APE_BASE		0x6000000
 
+/* SoC identification number information */
+#define U8500_BB_UID_BASE      (U8500_BACKUPRAM1_BASE + 0xFC0)
+
 #endif
diff --git a/arch/arm/mach-ux500/include/mach/setup.h b/arch/arm/mach-ux500/include/mach/setup.h
index e46b8b1..74b43bb 100644
--- a/arch/arm/mach-ux500/include/mach/setup.h
+++ b/arch/arm/mach-ux500/include/mach/setup.h
@@ -27,6 +27,8 @@ extern void __init u5500_sdi_init(struct device *parent);
 
 extern void __init db5500_dma_init(struct device *parent);
 
+extern struct device *ux500_soc_device_init(const char *soc_id);
+
 /* We re-use nomadik_timer for this platform */
 extern void nmdk_timer_init(void);
 
-- 
1.7.5.4

[PATCH 5/6] mach-ux500: move top level platform devices in sysfs to /sys/devices/socX

[Lee Jones]

At the request of Arnd Bergmann this patch moves all SoC
platform devices found in sysfs from /sys/devices/platform to
/sys/devices/soc<SoCNum>/. It is believed as the devices are
SoC specific and a /sys/devices/soc node has recently
become available, that this would be a more appropriate place to
display the data.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 arch/arm/mach-ux500/board-mop500.c   |   12 ++++++++++++
 arch/arm/mach-ux500/board-u5500.c    |    4 ++++
 arch/arm/mach-ux500/cpu-db5500.c     |    4 ++++
 arch/arm/mach-ux500/cpu-db8500.c     |    8 +++++++-
 arch/arm/mach-ux500/devices-common.c |   13 ++++++++++---
 arch/arm/mach-ux500/usb.c            |    3 +++
 6 files changed, 40 insertions(+), 4 deletions(-)

diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index f9ce2a1..04afcdf 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -610,6 +610,7 @@ static void __init mop500_init_machine(void)
 {
 	struct device *parent = NULL;
 	int i2c0_devs;
+	int i;
 
 	mop500_gpio_keys[0].gpio = GPIO_PROX_SENSOR;
 
@@ -617,6 +618,9 @@ static void __init mop500_init_machine(void)
 
 	mop500_pins_init();
 
+	for (i = 0; i < ARRAY_SIZE(mop500_platform_devs); i++)
+		mop500_platform_devs[i]->dev.parent = parent;
+
 	platform_add_devices(mop500_platform_devs,
 			ARRAY_SIZE(mop500_platform_devs));
 
@@ -639,11 +643,15 @@ static void __init snowball_init_machine(void)
 {
 	struct device *parent = NULL;
 	int i2c0_devs;
+	int i;
 
 	parent = u8500_init_devices();
 
 	snowball_pins_init();
 
+	for (i = 0; i < ARRAY_SIZE(snowball_platform_devs); i++)
+		snowball_platform_devs[i]->dev.parent = parent;
+
 	platform_add_devices(snowball_platform_devs,
 			ARRAY_SIZE(snowball_platform_devs));
 
@@ -665,6 +673,7 @@ static void __init hrefv60_init_machine(void)
 {
 	struct device *parent = NULL;
 	int i2c0_devs;
+	int i;
 
 	/*
 	 * The HREFv60 board removed a GPIO expander and routed
@@ -677,6 +686,9 @@ static void __init hrefv60_init_machine(void)
 
 	hrefv60_pins_init();
 
+	for (i = 0; i < ARRAY_SIZE(mop500_platform_devs); i++)
+		mop500_platform_devs[i]->dev.parent = parent;
+
 	platform_add_devices(mop500_platform_devs,
 			ARRAY_SIZE(mop500_platform_devs));
 
diff --git a/arch/arm/mach-ux500/board-u5500.c b/arch/arm/mach-ux500/board-u5500.c
index d7a9596..0ff4be7 100644
--- a/arch/arm/mach-ux500/board-u5500.c
+++ b/arch/arm/mach-ux500/board-u5500.c
@@ -136,6 +136,7 @@ static void __init u5500_uart_init(struct device *parent)
 static void __init u5500_init_machine(void)
 {
 	struct device *parent = NULL;
+	int i;
 
 	parent = u5500_init_devices();
 	nmk_config_pins(u5500_pins, ARRAY_SIZE(u5500_pins));
@@ -144,6 +145,9 @@ static void __init u5500_init_machine(void)
 	u5500_sdi_init(parent);
 	u5500_uart_init(parent);
 
+	for (i = 0; i < ARRAY_SIZE(u5500_platform_devices); i++)
+		u5500_platform_devices[i]->dev.parent = parent;
+
 	platform_add_devices(u5500_platform_devices,
 		ARRAY_SIZE(u5500_platform_devices));
 }
diff --git a/arch/arm/mach-ux500/cpu-db5500.c b/arch/arm/mach-ux500/cpu-db5500.c
index 8f8acfd..bca47f3 100644
--- a/arch/arm/mach-ux500/cpu-db5500.c
+++ b/arch/arm/mach-ux500/cpu-db5500.c
@@ -227,6 +227,7 @@ static struct device * __init db5500_soc_device_init(void)
 struct device * __init u5500_init_devices(void)
 {
 	struct device *parent;
+	int i;
 
 	parent = db5500_soc_device_init();
 
@@ -236,6 +237,9 @@ struct device * __init u5500_init_devices(void)
 	db5500_add_rtc(parent);
 	db5500_add_usb(parent, usb_db5500_rx_dma_cfg, usb_db5500_tx_dma_cfg);
 
+	for (i = 0; i < ARRAY_SIZE(db5500_platform_devs); i++)
+		db5500_platform_devs[i]->dev.parent = parent;
+
 	platform_add_devices(db5500_platform_devs,
 			     ARRAY_SIZE(db5500_platform_devs));
 
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index afcde3d..9bd8163 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -188,6 +188,7 @@ static struct device * __init db8500_soc_device_init(void)
 struct device * __init u8500_init_devices(void)
 {
 	struct device *parent;
+	int i;
 
 	parent = db8500_soc_device_init();
 
@@ -195,7 +196,12 @@ struct device * __init u8500_init_devices(void)
 	db8500_add_gpios(parent);
 	db8500_add_usb(parent, usb_db8500_rx_dma_cfg, usb_db8500_tx_dma_cfg);
 
-	platform_device_register_simple("cpufreq-u8500", -1, NULL, 0);
+	platform_device_register_data(parent,
+		"cpufreq-u8500", -1, NULL, 0);
+
+	for (i = 0; i < ARRAY_SIZE(platform_devs); i++)
+		platform_devs[i]->dev.parent = parent;
+
 	platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs));
 
 	return parent;
diff --git a/arch/arm/mach-ux500/devices-common.c b/arch/arm/mach-ux500/devices-common.c
index 96be248..96effbd 100644
--- a/arch/arm/mach-ux500/devices-common.c
+++ b/arch/arm/mach-ux500/devices-common.c
@@ -47,6 +47,8 @@ dbx500_add_amba_device(struct device *parent, const char *name,
 
 	dev->dev.platform_data = pdata;
 
+	dev->dev.parent = parent;
+
 	ret = amba_device_register(dev, &iomem_resource);
 	if (ret) {
 		kfree(dev);
@@ -126,9 +128,14 @@ dbx500_add_gpio(struct device *parent, int id, resource_size_t addr, int irq,
 		}
 	};
 
-	return platform_device_register_resndata(NULL, "gpio", id,
-				resources, ARRAY_SIZE(resources),
-				pdata, sizeof(*pdata));
+	return platform_device_register_resndata(
+		parent,
+		"gpio",
+		id,
+		resources,
+		ARRAY_SIZE(resources),
+		pdata,
+		sizeof(*pdata));
 }
 
 void dbx500_add_gpios(struct device *parent, resource_size_t *base, int num,
diff --git a/arch/arm/mach-ux500/usb.c b/arch/arm/mach-ux500/usb.c
index bef6a31..cdae63e 100644
--- a/arch/arm/mach-ux500/usb.c
+++ b/arch/arm/mach-ux500/usb.c
@@ -7,6 +7,7 @@
 #include <linux/platform_device.h>
 #include <linux/usb/musb.h>
 #include <linux/dma-mapping.h>
+
 #include <plat/ste_dma40.h>
 #include <mach/hardware.h>
 #include <mach/usb.h>
@@ -157,5 +158,7 @@ void ux500_add_usb(struct device *parent, resource_size_t base, int irq,
 	ux500_usb_dma_update_rx_ch_config(dma_rx_cfg);
 	ux500_usb_dma_update_tx_ch_config(dma_tx_cfg);
 
+	ux500_musb_device.dev.parent = parent;
+
 	platform_device_register(&ux500_musb_device);
 }
-- 
1.7.5.4

[PATCH 6/6] mach-ux500: remove intermediary add_platform_device* functions

[Lee Jones]

These are no longer required since a 'parent' pointer is now
passed to each registering device.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 arch/arm/mach-ux500/devices-common.c |   53 ----------------------------------
 arch/arm/mach-ux500/devices-common.h |   46 ++++++++++++++++-------------
 arch/arm/mach-ux500/devices-db8500.h |   10 ++++--
 3 files changed, 33 insertions(+), 76 deletions(-)

diff --git a/arch/arm/mach-ux500/devices-common.c b/arch/arm/mach-ux500/devices-common.c
index 96effbd..c3bc094 100644
--- a/arch/arm/mach-ux500/devices-common.c
+++ b/arch/arm/mach-ux500/devices-common.c
@@ -59,59 +59,6 @@ dbx500_add_amba_device(struct device *parent, const char *name,
 }
 
 static struct platform_device *
-dbx500_add_platform_device(const char *name, int id, void *pdata,
-			   struct resource *res, int resnum)
-{
-	struct platform_device *dev;
-	int ret;
-
-	dev = platform_device_alloc(name, id);
-	if (!dev)
-		return ERR_PTR(-ENOMEM);
-
-	dev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
-	dev->dev.dma_mask = &dev->dev.coherent_dma_mask;
-
-	ret = platform_device_add_resources(dev, res, resnum);
-	if (ret)
-		goto out_free;
-
-	dev->dev.platform_data = pdata;
-
-	ret = platform_device_add(dev);
-	if (ret)
-		goto out_free;
-
-	return dev;
-
-out_free:
-	platform_device_put(dev);
-	return ERR_PTR(ret);
-}
-
-struct platform_device *
-dbx500_add_platform_device_4k1irq(const char *name, int id,
-				  resource_size_t base,
-				  int irq, void *pdata)
-{
-	struct resource resources[] = {
-		[0] = {
-			.start	= base,
-			.end	= base + SZ_4K - 1,
-			.flags	= IORESOURCE_MEM,
-		},
-		[1] = {
-			.start	= irq,
-			.end	= irq,
-			.flags	= IORESOURCE_IRQ,
-		}
-	};
-
-	return dbx500_add_platform_device(name, id, pdata, resources,
-					  ARRAY_SIZE(resources));
-}
-
-static struct platform_device *
 dbx500_add_gpio(struct device *parent, int id, resource_size_t addr, int irq,
 		struct nmk_gpio_platform_data *pdata)
 {
diff --git a/arch/arm/mach-ux500/devices-common.h b/arch/arm/mach-ux500/devices-common.h
index f8adff8..39c74ec 100644
--- a/arch/arm/mach-ux500/devices-common.h
+++ b/arch/arm/mach-ux500/devices-common.h
@@ -8,14 +8,15 @@
 #ifndef __DEVICES_COMMON_H
 #define __DEVICES_COMMON_H
 
-extern struct amba_device *
-dbx500_add_amba_device(struct device *parent, const char *name, resource_size_t base,
-		       int irq, void *pdata, unsigned int periphid);
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/sys_soc.h>
+#include <plat/i2c.h>
 
-extern struct platform_device *
-dbx500_add_platform_device_4k1irq(const char *name, int id,
-				  resource_size_t base,
-				  int irq, void *pdata);
+extern struct amba_device *
+dbx500_add_amba_device(struct device *parent, const char *name,
+		       resource_size_t base, int irq, void *pdata,
+		       unsigned int periphid);
 
 struct spi_master_cntlr;
 
@@ -60,20 +61,25 @@ struct nmk_i2c_controller;
 
 static inline struct platform_device *
 dbx500_add_i2c(struct device *parent, int id, resource_size_t base, int irq,
-	       struct nmk_i2c_controller *pdata)
-{
-	return dbx500_add_platform_device_4k1irq("nmk-i2c", id, base, irq,
-						 pdata);
-}
-
-struct msp_i2s_platform_data;
-
-static inline struct platform_device *
-dbx500_add_msp_i2s(int id, resource_size_t base, int irq,
-		   struct msp_i2s_platform_data *pdata)
+	       struct nmk_i2c_controller *data)
 {
-	return dbx500_add_platform_device_4k1irq("MSP_I2S", id, base, irq,
-						 pdata);
+	struct resource res[] = {
+		DEFINE_RES_MEM(base, SZ_4K),
+		DEFINE_RES_IRQ(irq),
+	};
+
+	struct platform_device_info pdevinfo = {
+		.parent = parent,
+		.name = "nmk-i2c",
+		.id = id,
+		.res = res,
+		.num_res = ARRAY_SIZE(res),
+		.data = data,
+		.size_data = sizeof(*data),
+		.dma_mask = DMA_BIT_MASK(32),
+	};
+
+	return platform_device_register_full(&pdevinfo);
 }
 
 static inline struct amba_device *
diff --git a/arch/arm/mach-ux500/devices-db8500.h b/arch/arm/mach-ux500/devices-db8500.h
index 9bd08ad..9fd93e9 100644
--- a/arch/arm/mach-ux500/devices-db8500.h
+++ b/arch/arm/mach-ux500/devices-db8500.h
@@ -18,9 +18,13 @@ db8500_add_ske_keypad(struct device *parent,
 		      struct ske_keypad_platform_data *pdata,
 		      size_t size)
 {
-	return dbx500_add_platform_device_4k1irq("nmk-ske-keypad", -1,
-						 U8500_SKE_BASE,
-						 IRQ_DB8500_KB, pdata);
+	struct resource resources[] = {
+		DEFINE_RES_MEM(U8500_SKE_BASE, SZ_4K),
+		DEFINE_RES_IRQ(IRQ_DB8500_KB),
+	};
+
+	return platform_device_register_resndata(parent, "nmk-ske-keypad", -1,
+						 resources, 2, pdata, size);
 }
 
 static inline struct amba_device *
-- 
1.7.5.4

[PATCH 0/6] ux500: Export SoC information and some platform clean-up

[Arnd Bergmann]

On Saturday 21 January 2012, Lee Jones wrote:
> 
> This patch-set satisfies 4 objectives:
>  1. Ensures each platform device can specify a suitable parent
>  2. Provides a bus for SoC devices as a means to export information
>  3. Allows ux500 to make use of the new SoC bus
>  4. Cleans up unnecessary complexity from ux500 code

This version looks good to me, I have no further comments right now.

Greg, can you have another look? I think Lee has addressed all of
my comments as well as yours.

Linus, does this fit with your plans for migrating to only
device-tree based probing for ux500? I guess if this goes in
first, you will have to make a few changes so that it keeps working
when the devices are put into the dts.

Everyone else, who is planning to use the infrastructure besides ux500?

	Arnd

[PATCH 0/6] ux500: Export SoC information and some platform clean-up

[Arnd Bergmann]

On Monday 23 January 2012, Arnd Bergmann wrote:
> Greg, can you have another look? I think Lee has addressed all of
> my comments as well as yours.

Nevermind, I just saw your replies from Friday, it seems you were already
aware of it.

	Arnd

[PATCH 0/6] ux500: Export SoC information and some platform clean-up

[Linus Walleij]

On Mon, Jan 23, 2012 at 4:58 PM, Arnd Bergmann <arnd@arndb.de> wrote:

> Linus, does this fit with your plans for migrating to only
> device-tree based probing for ux500?

Well the SoC registatration (I guess in mach-*/* someplace)
needs to be DT compliant by parsing some node too, but
that should be some minor thing.

I'm not smart enough to tell whether DT will automagically
arrange parenthood between struct device * nodes or if
that needs a lot of custom code to work?

> I guess if this goes in
> first, you will have to make a few changes so that it keeps working
> when the devices are put into the dts.

Oh well, that is a bit ahead in time anyway. We need DT support
in a plethora of drivers before we're getting anywhere on that.
Niklas is the right one to ask I guess...

> Everyone else, who is planning to use the infrastructure besides ux500?

I can easily see this being used in the ARM reference designs
(Integrator, Versatile, RealView and Versatile Express) some of them
I can possibly patch myself even. OMAP has expressed interest
in "some way of getting the SoC ID out", and I guess this is
the means to that end.

Yours,
Linus Walleij

[PATCH 0/6] ux500: Export SoC information and some platform clean-up

[Arnd Bergmann]

On Tuesday 24 January 2012, Linus Walleij wrote:
> On Mon, Jan 23, 2012 at 4:58 PM, Arnd Bergmann <arnd@arndb.de> wrote:
> 
> > Linus, does this fit with your plans for migrating to only
> > device-tree based probing for ux500?
> 
> Well the SoC registatration (I guess in mach-*/* someplace)
> needs to be DT compliant by parsing some node too, but
> that should be some minor thing.
> 
> I'm not smart enough to tell whether DT will automagically
> arrange parenthood between struct device * nodes or if
> that needs a lot of custom code to work?

Right now, of_platform_populate takes a struct device that is
used as the parent for all buses that get probed from the
OF device tree. This would need to be integrated with the
soc_dev probing in some way, either by letting
of_platform_populate call soc_device_register internally
and gaining an extra struct soc_device_attribute
argument, or by calling of_platform_populate from a
platform specific function and passing a device node
below the soc_dev into it.

> > I guess if this goes in
> > first, you will have to make a few changes so that it keeps working
> > when the devices are put into the dts.
> 
> Oh well, that is a bit ahead in time anyway. We need DT support
> in a plethora of drivers before we're getting anywhere on that.
> Niklas is the right one to ask I guess...

Are there really so many driver changes required for this? We would
not do it for the on-chip devices at first, so it basically comes
down to the the i2c, sdi, spi and uart devices, all of which have
bus bindings already. The hardest thing might be the pinmux
configuration, but you already know more about the state of that
than I do.

> > Everyone else, who is planning to use the infrastructure besides ux500?
> 
> I can easily see this being used in the ARM reference designs
> (Integrator, Versatile, RealView and Versatile Express) some of them
> I can possibly patch myself even. OMAP has expressed interest
> in "some way of getting the SoC ID out", and I guess this is
> the means to that end.

Ah, good. Once these patches are merged, we can easily refer anyone
to this infrastructure if they try to add a different way of finding
a SoC ID.

	Arnd

[PATCH 0/6] ux500: Export SoC information and some platform clean-up

[Lee Jones]

On 25/01/12 15:01, Arnd Bergmann wrote:
> On Tuesday 24 January 2012, Linus Walleij wrote:
>> On Mon, Jan 23, 2012 at 4:58 PM, Arnd Bergmann <arnd@arndb.de> wrote:
>>
>>> Linus, does this fit with your plans for migrating to only
>>> device-tree based probing for ux500?
>>
>> Well the SoC registatration (I guess in mach-*/* someplace)
>> needs to be DT compliant by parsing some node too, but
>> that should be some minor thing.
>>
>> I'm not smart enough to tell whether DT will automagically
>> arrange parenthood between struct device * nodes or if
>> that needs a lot of custom code to work?
> 
> Right now, of_platform_populate takes a struct device that is
> used as the parent for all buses that get probed from the
> OF device tree. This would need to be integrated with the
> soc_dev probing in some way, either by letting
> of_platform_populate call soc_device_register internally
> and gaining an extra struct soc_device_attribute
> argument, or by calling of_platform_populate from a
> platform specific function and passing a device node
> below the soc_dev into it.
> 
>>> I guess if this goes in
>>> first, you will have to make a few changes so that it keeps working
>>> when the devices are put into the dts.
>>
>> Oh well, that is a bit ahead in time anyway. We need DT support
>> in a plethora of drivers before we're getting anywhere on that.
>> Niklas is the right one to ask I guess...
> 
> Are there really so many driver changes required for this? We would
> not do it for the on-chip devices at first, so it basically comes
> down to the the i2c, sdi, spi and uart devices, all of which have
> bus bindings already. The hardest thing might be the pinmux
> configuration, but you already know more about the state of that
> than I do.
> 
>>> Everyone else, who is planning to use the infrastructure besides ux500?
>>
>> I can easily see this being used in the ARM reference designs
>> (Integrator, Versatile, RealView and Versatile Express) some of them
>> I can possibly patch myself even. OMAP has expressed interest
>> in "some way of getting the SoC ID out", and I guess this is
>> the means to that end.
> 
> Ah, good. Once these patches are merged, we can easily refer anyone
> to this infrastructure if they try to add a different way of finding
> a SoC ID.

Okay, so this sounds promising. Which route are the patches likely to
take? Will they go up through your SoC tree Arnd?

Kind regards,
Lee

[PATCH 0/6] ux500: Export SoC information and some platform clean-up

[Arnd Bergmann]

On Wednesday 25 January 2012, Lee Jones wrote:
> >>> Everyone else, who is planning to use the infrastructure besides ux500?
> >>
> >> I can easily see this being used in the ARM reference designs
> >> (Integrator, Versatile, RealView and Versatile Express) some of them
> >> I can possibly patch myself even. OMAP has expressed interest
> >> in "some way of getting the SoC ID out", and I guess this is
> >> the means to that end.
> > 
> > Ah, good. Once these patches are merged, we can easily refer anyone
> > to this infrastructure if they try to add a different way of finding
> > a SoC ID.
> 
> Okay, so this sounds promising. Which route are the patches likely to
> take? Will they go up through your SoC tree Arnd?

That's probably the best way. Of course you need to have Acks
from Greg (for the bus) and Linus Walleij (for the ux500 stuff)
before I can merge them. Linus can decide whether he wants to
submit them to me through a pull request from his ux500 tree
(with Signed-off-by) or whether I should apply them myself
(with Ack).

	Arnd

[PATCH 0/6] ux500: Export SoC information and some platform clean-up

[Greg KH]

On Thu, Jan 26, 2012 at 03:20:43PM +0000, Arnd Bergmann wrote:
> On Wednesday 25 January 2012, Lee Jones wrote:
> > >>> Everyone else, who is planning to use the infrastructure besides ux500?
> > >>
> > >> I can easily see this being used in the ARM reference designs
> > >> (Integrator, Versatile, RealView and Versatile Express) some of them
> > >> I can possibly patch myself even. OMAP has expressed interest
> > >> in "some way of getting the SoC ID out", and I guess this is
> > >> the means to that end.
> > > 
> > > Ah, good. Once these patches are merged, we can easily refer anyone
> > > to this infrastructure if they try to add a different way of finding
> > > a SoC ID.
> > 
> > Okay, so this sounds promising. Which route are the patches likely to
> > take? Will they go up through your SoC tree Arnd?
> 
> That's probably the best way. Of course you need to have Acks
> from Greg (for the bus) and Linus Walleij (for the ux500 stuff)
> before I can merge them. Linus can decide whether he wants to
> submit them to me through a pull request from his ux500 tree
> (with Signed-off-by) or whether I should apply them myself
> (with Ack).

I'll try to review these again tomorrow...

[PATCH 0/6] ux500: Export SoC information and some platform clean-up

[Linus Walleij]

On Thu, Jan 26, 2012 at 4:20 PM, Arnd Bergmann <arnd@arndb.de> wrote:
> On Wednesday 25 January 2012, Lee Jones wrote:
>> Okay, so this sounds promising. Which route are the patches likely to
>> take? Will they go up through your SoC tree Arnd?
>
> That's probably the best way. Of course you need to have Acks
> from Greg (for the bus) and Linus Walleij (for the ux500 stuff)

Lee, you have my ACK on the Ux500 parts. The bus part I leave
for Greg to deal with...

Yours,
Linus Walleij

[PATCH 0/6] ux500: Export SoC information and some platform clean-up

[Lee Jones]

This patch-set satisfies 4 objectives:
 1. Ensures each platform device can specify a suitable parent
 2. Provides a bus for SoC devices as a means to export information
 3. Allows ux500 to make use of the new SoC bus
 4. Cleans up unnecessary complexity from ux500 code

---
 Documentation/ABI/testing/sysfs-devices-soc    |   58 ++++++++
 arch/arm/mach-ux500/Kconfig                    |    1 +
 arch/arm/mach-ux500/board-mop500-sdi.c         |   31 ++--
 arch/arm/mach-ux500/board-mop500.c             |   74 ++++++----
 arch/arm/mach-ux500/board-mop500.h             |    8 +-
 arch/arm/mach-ux500/board-u5500-sdi.c          |    4 +-
 arch/arm/mach-ux500/board-u5500.c              |   27 ++--
 arch/arm/mach-ux500/cpu-db5500.c               |   36 ++++-
 arch/arm/mach-ux500/cpu-db8500.c               |   44 +++++-
 arch/arm/mach-ux500/cpu.c                      |   75 ++++++++++
 arch/arm/mach-ux500/devices-common.c           |   79 ++--------
 arch/arm/mach-ux500/devices-common.h           |   83 ++++++-----
 arch/arm/mach-ux500/devices-db5500.h           |  116 +++++++++------
 arch/arm/mach-ux500/devices-db8500.h           |  176 +++++++++++++----------
 arch/arm/mach-ux500/dma-db5500.c               |    3 +-
 arch/arm/mach-ux500/include/mach/db8500-regs.h |    3 +
 arch/arm/mach-ux500/include/mach/setup.h       |   10 +-
 arch/arm/mach-ux500/include/mach/usb.h         |    4 +-
 arch/arm/mach-ux500/usb.c                      |    7 +-
 drivers/base/Kconfig                           |    3 +
 drivers/base/Makefile                          |    1 +
 drivers/base/soc.c                             |  186 ++++++++++++++++++++++++
 include/linux/syssoc.h                         |   74 ++++++++++
 23 files changed, 799 insertions(+), 304 deletions(-)

[PATCH 1/6] mach-ux500: pass parent pointer to each platform device

[Lee Jones]

This patch provides a means for any device within ux500
platform code to allocate its own parent. This is particularly
prudent with the introduction of /sys/devices/socX, as a
device can now proclaim to be integral part of an SoC, rather
than a more generic platform device. Latter patches make good
use of this functionality.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 arch/arm/mach-ux500/board-mop500-sdi.c   |   31 +++---
 arch/arm/mach-ux500/board-mop500.c       |   62 ++++++-----
 arch/arm/mach-ux500/board-mop500.h       |    8 +-
 arch/arm/mach-ux500/board-u5500-sdi.c    |    4 +-
 arch/arm/mach-ux500/board-u5500.c        |   23 +++--
 arch/arm/mach-ux500/cpu-db5500.c         |   18 ++--
 arch/arm/mach-ux500/cpu-db8500.c         |   15 ++--
 arch/arm/mach-ux500/devices-common.c     |   13 ++-
 arch/arm/mach-ux500/devices-common.h     |   39 ++++---
 arch/arm/mach-ux500/devices-db5500.h     |  116 ++++++++++++---------
 arch/arm/mach-ux500/devices-db8500.h     |  166 +++++++++++++++++-------------
 arch/arm/mach-ux500/dma-db5500.c         |    3 +-
 arch/arm/mach-ux500/include/mach/setup.h |    8 +-
 arch/arm/mach-ux500/include/mach/usb.h   |    4 +-
 arch/arm/mach-ux500/usb.c                |    4 +-
 15 files changed, 289 insertions(+), 225 deletions(-)

diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c
index 23be34b..163c083 100644
--- a/arch/arm/mach-ux500/board-mop500-sdi.c
+++ b/arch/arm/mach-ux500/board-mop500-sdi.c
@@ -104,7 +104,7 @@ static struct mmci_platform_data mop500_sdi0_data = {
 #endif
 };
 
-static void sdi0_configure(void)
+static void sdi0_configure(struct device *parent)
 {
 	int ret;
 
@@ -123,15 +123,15 @@ static void sdi0_configure(void)
 	gpio_direction_output(sdi0_en, 1);
 
 	/* Add the device, force v2 to subrevision 1 */
-	db8500_add_sdi0(&mop500_sdi0_data, U8500_SDI_V2_PERIPHID);
+	db8500_add_sdi0(parent, &mop500_sdi0_data, U8500_SDI_V2_PERIPHID);
 }
 
-void mop500_sdi_tc35892_init(void)
+void mop500_sdi_tc35892_init(struct device *parent)
 {
 	mop500_sdi0_data.gpio_cd = GPIO_SDMMC_CD;
 	sdi0_en = GPIO_SDMMC_EN;
 	sdi0_vsel = GPIO_SDMMC_1V8_3V_SEL;
-	sdi0_configure();
+	sdi0_configure(parent);
 }
 
 /*
@@ -246,12 +246,13 @@ static struct mmci_platform_data mop500_sdi4_data = {
 #endif
 };
 
-void __init mop500_sdi_init(void)
+void __init mop500_sdi_init(struct device *parent)
 {
 	/* PoP:ed eMMC */
-	db8500_add_sdi2(&mop500_sdi2_data, U8500_SDI_V2_PERIPHID);
+	db8500_add_sdi2(parent, &mop500_sdi2_data, U8500_SDI_V2_PERIPHID);
 	/* On-board eMMC */
-	db8500_add_sdi4(&mop500_sdi4_data, U8500_SDI_V2_PERIPHID);
+	db8500_add_sdi4(parent, &mop500_sdi4_data, U8500_SDI_V2_PERIPHID);
+
 	/*
 	 * On boards with the TC35892 GPIO expander, sdi0 will finally
 	 * be added when the TC35892 initializes and calls
@@ -259,29 +260,29 @@ void __init mop500_sdi_init(void)
 	 */
 }
 
-void __init snowball_sdi_init(void)
+void __init snowball_sdi_init(struct device *parent)
 {
 	/* On-board eMMC */
-	db8500_add_sdi4(&mop500_sdi4_data, U8500_SDI_V2_PERIPHID);
+	db8500_add_sdi4(parent, &mop500_sdi4_data, U8500_SDI_V2_PERIPHID);
 	/* External Micro SD slot */
 	mop500_sdi0_data.gpio_cd = SNOWBALL_SDMMC_CD_GPIO;
 	mop500_sdi0_data.cd_invert = true;
 	sdi0_en = SNOWBALL_SDMMC_EN_GPIO;
 	sdi0_vsel = SNOWBALL_SDMMC_1V8_3V_GPIO;
-	sdi0_configure();
+	sdi0_configure(parent);
 }
 
-void __init hrefv60_sdi_init(void)
+void __init hrefv60_sdi_init(struct device *parent)
 {
 	/* PoP:ed eMMC */
-	db8500_add_sdi2(&mop500_sdi2_data, U8500_SDI_V2_PERIPHID);
+	db8500_add_sdi2(parent, &mop500_sdi2_data, U8500_SDI_V2_PERIPHID);
 	/* On-board eMMC */
-	db8500_add_sdi4(&mop500_sdi4_data, U8500_SDI_V2_PERIPHID);
+	db8500_add_sdi4(parent, &mop500_sdi4_data, U8500_SDI_V2_PERIPHID);
 	/* External Micro SD slot */
 	mop500_sdi0_data.gpio_cd = HREFV60_SDMMC_CD_GPIO;
 	sdi0_en = HREFV60_SDMMC_EN_GPIO;
 	sdi0_vsel = HREFV60_SDMMC_1V8_3V_GPIO;
-	sdi0_configure();
+	sdi0_configure(parent);
 	/* WLAN SDIO channel */
-	db8500_add_sdi1(&mop500_sdi1_data, U8500_SDI_V2_PERIPHID);
+	db8500_add_sdi1(parent, &mop500_sdi1_data, U8500_SDI_V2_PERIPHID);
 }
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index 5c00712..f9ce2a1 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -226,7 +226,12 @@ static struct tps6105x_platform_data mop500_tps61052_data = {
 
 static void mop500_tc35892_init(struct tc3589x *tc3589x, unsigned int base)
 {
-	mop500_sdi_tc35892_init();
+	struct device *parent = NULL;
+#if 0
+	/* FIXME: Is the sdi actually part of tc3589x? */
+	parent = tc3589x->dev;
+#endif
+	mop500_sdi_tc35892_init(parent);
 }
 
 static struct tc3589x_gpio_platform_data mop500_tc35892_gpio_data = {
@@ -353,12 +358,12 @@ U8500_I2C_CONTROLLER(1, 0xe, 1, 8, 100000, 200, I2C_FREQ_MODE_FAST);
 U8500_I2C_CONTROLLER(2,	0xe, 1, 8, 100000, 200, I2C_FREQ_MODE_FAST);
 U8500_I2C_CONTROLLER(3,	0xe, 1, 8, 100000, 200, I2C_FREQ_MODE_FAST);
 
-static void __init mop500_i2c_init(void)
+static void __init mop500_i2c_init(struct device *parent)
 {
-	db8500_add_i2c0(&u8500_i2c0_data);
-	db8500_add_i2c1(&u8500_i2c1_data);
-	db8500_add_i2c2(&u8500_i2c2_data);
-	db8500_add_i2c3(&u8500_i2c3_data);
+	db8500_add_i2c0(parent, &u8500_i2c0_data);
+	db8500_add_i2c1(parent, &u8500_i2c1_data);
+	db8500_add_i2c2(parent, &u8500_i2c2_data);
+	db8500_add_i2c3(parent, &u8500_i2c3_data);
 }
 
 static struct gpio_keys_button mop500_gpio_keys[] = {
@@ -451,9 +456,9 @@ static struct pl022_ssp_controller ssp0_platform_data = {
 	.num_chipselect = 5,
 };
 
-static void __init mop500_spi_init(void)
+static void __init mop500_spi_init(struct device *parent)
 {
-	db8500_add_ssp0(&ssp0_platform_data);
+	db8500_add_ssp0(parent, &ssp0_platform_data);
 }
 
 #ifdef CONFIG_STE_DMA40
@@ -587,11 +592,11 @@ static struct amba_pl011_data uart2_plat = {
 #endif
 };
 
-static void __init mop500_uart_init(void)
+static void __init mop500_uart_init(struct device *parent)
 {
-	db8500_add_uart0(&uart0_plat);
-	db8500_add_uart1(&uart1_plat);
-	db8500_add_uart2(&uart2_plat);
+	db8500_add_uart0(parent, &uart0_plat);
+	db8500_add_uart1(parent, &uart1_plat);
+	db8500_add_uart2(parent, &uart2_plat);
 }
 
 static struct platform_device *snowball_platform_devs[] __initdata = {
@@ -603,21 +608,22 @@ static struct platform_device *snowball_platform_devs[] __initdata = {
 
 static void __init mop500_init_machine(void)
 {
+	struct device *parent = NULL;
 	int i2c0_devs;
 
 	mop500_gpio_keys[0].gpio = GPIO_PROX_SENSOR;
 
-	u8500_init_devices();
+	parent = u8500_init_devices();
 
 	mop500_pins_init();
 
 	platform_add_devices(mop500_platform_devs,
 			ARRAY_SIZE(mop500_platform_devs));
 
-	mop500_i2c_init();
-	mop500_sdi_init();
-	mop500_spi_init();
-	mop500_uart_init();
+	mop500_i2c_init(parent);
+	mop500_sdi_init(parent);
+	mop500_spi_init(parent);
+	mop500_uart_init(parent);
 
 	i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
 
@@ -631,19 +637,20 @@ static void __init mop500_init_machine(void)
 
 static void __init snowball_init_machine(void)
 {
+	struct device *parent = NULL;
 	int i2c0_devs;
 
-	u8500_init_devices();
+	parent = u8500_init_devices();
 
 	snowball_pins_init();
 
 	platform_add_devices(snowball_platform_devs,
 			ARRAY_SIZE(snowball_platform_devs));
 
-	mop500_i2c_init();
-	snowball_sdi_init();
-	mop500_spi_init();
-	mop500_uart_init();
+	mop500_i2c_init(parent);
+	snowball_sdi_init(parent);
+	mop500_spi_init(parent);
+	mop500_uart_init(parent);
 
 	i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
 	i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs);
@@ -656,6 +663,7 @@ static void __init snowball_init_machine(void)
 
 static void __init hrefv60_init_machine(void)
 {
+	struct device *parent = NULL;
 	int i2c0_devs;
 
 	/*
@@ -665,17 +673,17 @@ static void __init hrefv60_init_machine(void)
 	 */
 	mop500_gpio_keys[0].gpio = HREFV60_PROX_SENSE_GPIO;
 
-	u8500_init_devices();
+	parent = u8500_init_devices();
 
 	hrefv60_pins_init();
 
 	platform_add_devices(mop500_platform_devs,
 			ARRAY_SIZE(mop500_platform_devs));
 
-	mop500_i2c_init();
-	hrefv60_sdi_init();
-	mop500_spi_init();
-	mop500_uart_init();
+	mop500_i2c_init(parent);
+	hrefv60_sdi_init(parent);
+	mop500_spi_init(parent);
+	mop500_uart_init(parent);
 
 	i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
 
diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h
index f926d3d..3d594c2 100644
--- a/arch/arm/mach-ux500/board-mop500.h
+++ b/arch/arm/mach-ux500/board-mop500.h
@@ -75,10 +75,10 @@
 
 struct i2c_board_info;
 
-extern void mop500_sdi_init(void);
-extern void snowball_sdi_init(void);
-extern void hrefv60_sdi_init(void);
-extern void mop500_sdi_tc35892_init(void);
+extern void mop500_sdi_init(struct device *parent);
+extern void snowball_sdi_init(struct device *parent);
+extern void hrefv60_sdi_init(struct device *parent);
+extern void mop500_sdi_tc35892_init(struct device *parent);
 void __init mop500_u8500uib_init(void);
 void __init mop500_stuib_init(void);
 void __init mop500_pins_init(void);
diff --git a/arch/arm/mach-ux500/board-u5500-sdi.c b/arch/arm/mach-ux500/board-u5500-sdi.c
index 63c3f80..836112e 100644
--- a/arch/arm/mach-ux500/board-u5500-sdi.c
+++ b/arch/arm/mach-ux500/board-u5500-sdi.c
@@ -66,9 +66,9 @@ static struct mmci_platform_data u5500_sdi0_data = {
 #endif
 };
 
-void __init u5500_sdi_init(void)
+void __init u5500_sdi_init(struct device *parent)
 {
 	nmk_config_pins(u5500_sdi_pins, ARRAY_SIZE(u5500_sdi_pins));
 
-	db5500_add_sdi0(&u5500_sdi0_data);
+	db5500_add_sdi0(parent, &u5500_sdi0_data);
 }
diff --git a/arch/arm/mach-ux500/board-u5500.c b/arch/arm/mach-ux500/board-u5500.c
index 9de9e9c..d7a9596 100644
--- a/arch/arm/mach-ux500/board-u5500.c
+++ b/arch/arm/mach-ux500/board-u5500.c
@@ -97,9 +97,9 @@ static struct i2c_board_info __initdata u5500_i2c2_devices[] = {
 	},
 };
 
-static void __init u5500_i2c_init(void)
+static void __init u5500_i2c_init(struct device *parent)
 {
-	db5500_add_i2c2(&u5500_i2c2_data);
+	db5500_add_i2c2(parent, &u5500_i2c2_data);
 	i2c_register_board_info(2, ARRAY_AND_SIZE(u5500_i2c2_devices));
 }
 
@@ -126,20 +126,23 @@ static struct platform_device *u5500_platform_devices[] __initdata = {
 	&ab5500_device,
 };
 
-static void __init u5500_uart_init(void)
+static void __init u5500_uart_init(struct device *parent)
 {
-	db5500_add_uart0(NULL);
-	db5500_add_uart1(NULL);
-	db5500_add_uart2(NULL);
+	db5500_add_uart0(parent, NULL);
+	db5500_add_uart1(parent, NULL);
+	db5500_add_uart2(parent, NULL);
 }
 
 static void __init u5500_init_machine(void)
 {
-	u5500_init_devices();
+	struct device *parent = NULL;
+
+	parent = u5500_init_devices();
 	nmk_config_pins(u5500_pins, ARRAY_SIZE(u5500_pins));
-	u5500_i2c_init();
-	u5500_sdi_init();
-	u5500_uart_init();
+
+	u5500_i2c_init(parent);
+	u5500_sdi_init(parent);
+	u5500_uart_init(parent);
 
 	platform_add_devices(u5500_platform_devices,
 		ARRAY_SIZE(u5500_platform_devices));
diff --git a/arch/arm/mach-ux500/cpu-db5500.c b/arch/arm/mach-ux500/cpu-db5500.c
index 18aa5c0..c402fd6 100644
--- a/arch/arm/mach-ux500/cpu-db5500.c
+++ b/arch/arm/mach-ux500/cpu-db5500.c
@@ -147,13 +147,13 @@ static resource_size_t __initdata db5500_gpio_base[] = {
 	U5500_GPIOBANK7_BASE,
 };
 
-static void __init db5500_add_gpios(void)
+static void __init db5500_add_gpios(struct device *parent)
 {
 	struct nmk_gpio_platform_data pdata = {
 		/* No custom data yet */
 	};
 
-	dbx500_add_gpios(ARRAY_AND_SIZE(db5500_gpio_base),
+	dbx500_add_gpios(parent, ARRAY_AND_SIZE(db5500_gpio_base),
 			 IRQ_DB5500_GPIO0, &pdata);
 }
 
@@ -212,14 +212,18 @@ static int usb_db5500_tx_dma_cfg[] = {
 	DB5500_DMA_DEV38_USB_OTG_OEP_8
 };
 
-void __init u5500_init_devices(void)
+struct device* __init u5500_init_devices(void)
 {
-	db5500_add_gpios();
+	/* FIXME: First parameter to be a real parent. */
+	db5500_add_gpios(NULL);
 	db5500_pmu_init();
-	db5500_dma_init();
-	db5500_add_rtc();
-	db5500_add_usb(usb_db5500_rx_dma_cfg, usb_db5500_tx_dma_cfg);
+	db5500_dma_init(NULL);
+	db5500_add_rtc(NULL);
+	db5500_add_usb(NULL, usb_db5500_rx_dma_cfg, usb_db5500_tx_dma_cfg);
 
 	platform_add_devices(db5500_platform_devs,
 			     ARRAY_SIZE(db5500_platform_devs));
+
+	/* FIXME: Return value to be a real parent. */
+	return NULL;
 }
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index 7176ee7..1e8a2cb 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -132,13 +132,13 @@ static resource_size_t __initdata db8500_gpio_base[] = {
 	U8500_GPIOBANK8_BASE,
 };
 
-static void __init db8500_add_gpios(void)
+static void __init db8500_add_gpios(struct device *parent)
 {
 	struct nmk_gpio_platform_data pdata = {
 		.supports_sleepmode = true,
 	};
 
-	dbx500_add_gpios(ARRAY_AND_SIZE(db8500_gpio_base),
+	dbx500_add_gpios(parent, ARRAY_AND_SIZE(db8500_gpio_base),
 			 IRQ_DB8500_GPIO0, &pdata);
 }
 
@@ -167,14 +167,15 @@ static int usb_db8500_tx_dma_cfg[] = {
 /*
  * This function is called from the board init
  */
-void __init u8500_init_devices(void)
+struct device* __init u8500_init_devices(void)
 {
-	db8500_add_rtc();
-	db8500_add_gpios();
-	db8500_add_usb(usb_db8500_rx_dma_cfg, usb_db8500_tx_dma_cfg);
+	db8500_add_rtc(NULL);
+	db8500_add_gpios(NULL);
+	db8500_add_usb(NULL, usb_db8500_rx_dma_cfg, usb_db8500_tx_dma_cfg);
 
 	platform_device_register_simple("cpufreq-u8500", -1, NULL, 0);
 	platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs));
 
-	return ;
+	/* FIXME: Return value to be a real parent. */
+	return NULL;
 }
diff --git a/arch/arm/mach-ux500/devices-common.c b/arch/arm/mach-ux500/devices-common.c
index c563e54..96be248 100644
--- a/arch/arm/mach-ux500/devices-common.c
+++ b/arch/arm/mach-ux500/devices-common.c
@@ -20,8 +20,9 @@
 #include "devices-common.h"
 
 struct amba_device *
-dbx500_add_amba_device(const char *name, resource_size_t base,
-		       int irq, void *pdata, unsigned int periphid)
+dbx500_add_amba_device(struct device *parent, const char *name,
+		       resource_size_t base, int irq, void *pdata,
+		       unsigned int periphid)
 {
 	struct amba_device *dev;
 	int ret;
@@ -109,7 +110,7 @@ dbx500_add_platform_device_4k1irq(const char *name, int id,
 }
 
 static struct platform_device *
-dbx500_add_gpio(int id, resource_size_t addr, int irq,
+dbx500_add_gpio(struct device *parent, int id, resource_size_t addr, int irq,
 		struct nmk_gpio_platform_data *pdata)
 {
 	struct resource resources[] = {
@@ -130,8 +131,8 @@ dbx500_add_gpio(int id, resource_size_t addr, int irq,
 				pdata, sizeof(*pdata));
 }
 
-void dbx500_add_gpios(resource_size_t *base, int num, int irq,
-		      struct nmk_gpio_platform_data *pdata)
+void dbx500_add_gpios(struct device *parent, resource_size_t *base, int num,
+		      int irq, struct nmk_gpio_platform_data *pdata)
 {
 	int first = 0;
 	int i;
@@ -141,6 +142,6 @@ void dbx500_add_gpios(resource_size_t *base, int num, int irq,
 		pdata->first_irq = NOMADIK_GPIO_TO_IRQ(first);
 		pdata->num_gpio = 32;
 
-		dbx500_add_gpio(i, base[i], irq, pdata);
+		dbx500_add_gpio(parent, i, base[i], irq, pdata);
 	}
 }
diff --git a/arch/arm/mach-ux500/devices-common.h b/arch/arm/mach-ux500/devices-common.h
index 7825705..f8adff8 100644
--- a/arch/arm/mach-ux500/devices-common.h
+++ b/arch/arm/mach-ux500/devices-common.h
@@ -9,7 +9,7 @@
 #define __DEVICES_COMMON_H
 
 extern struct amba_device *
-dbx500_add_amba_device(const char *name, resource_size_t base,
+dbx500_add_amba_device(struct device *parent, const char *name, resource_size_t base,
 		       int irq, void *pdata, unsigned int periphid);
 
 extern struct platform_device *
@@ -20,43 +20,46 @@ dbx500_add_platform_device_4k1irq(const char *name, int id,
 struct spi_master_cntlr;
 
 static inline struct amba_device *
-dbx500_add_msp_spi(const char *name, resource_size_t base, int irq,
+dbx500_add_msp_spi(struct device *parent, const char *name,
+		   resource_size_t base, int irq,
 		   struct spi_master_cntlr *pdata)
 {
-	return dbx500_add_amba_device(name, base, irq, pdata, 0);
+	return dbx500_add_amba_device(parent, name, base, irq,
+				      pdata, 0);
 }
 
 static inline struct amba_device *
-dbx500_add_spi(const char *name, resource_size_t base, int irq,
-	       struct spi_master_cntlr *pdata,
+dbx500_add_spi(struct device *parent, const char *name, resource_size_t base,
+	       int irq, struct spi_master_cntlr *pdata,
 	       u32 periphid)
 {
-	return dbx500_add_amba_device(name, base, irq, pdata, periphid);
+	return dbx500_add_amba_device(parent, name, base, irq,
+				      pdata, periphid);
 }
 
 struct mmci_platform_data;
 
 static inline struct amba_device *
-dbx500_add_sdi(const char *name, resource_size_t base, int irq,
-	       struct mmci_platform_data *pdata,
-	       u32 periphid)
+dbx500_add_sdi(struct device *parent, const char *name, resource_size_t base,
+	       int irq, struct mmci_platform_data *pdata, u32 periphid)
 {
-	return dbx500_add_amba_device(name, base, irq, pdata, periphid);
+	return dbx500_add_amba_device(parent, name, base, irq,
+				      pdata, periphid);
 }
 
 struct amba_pl011_data;
 
 static inline struct amba_device *
-dbx500_add_uart(const char *name, resource_size_t base, int irq,
-		struct amba_pl011_data *pdata)
+dbx500_add_uart(struct device *parent, const char *name, resource_size_t base,
+		int irq, struct amba_pl011_data *pdata)
 {
-	return dbx500_add_amba_device(name, base, irq, pdata, 0);
+	return dbx500_add_amba_device(parent, name, base, irq, pdata, 0);
 }
 
 struct nmk_i2c_controller;
 
 static inline struct platform_device *
-dbx500_add_i2c(int id, resource_size_t base, int irq,
+dbx500_add_i2c(struct device *parent, int id, resource_size_t base, int irq,
 	       struct nmk_i2c_controller *pdata)
 {
 	return dbx500_add_platform_device_4k1irq("nmk-i2c", id, base, irq,
@@ -74,14 +77,14 @@ dbx500_add_msp_i2s(int id, resource_size_t base, int irq,
 }
 
 static inline struct amba_device *
-dbx500_add_rtc(resource_size_t base, int irq)
+dbx500_add_rtc(struct device *parent, resource_size_t base, int irq)
 {
-	return dbx500_add_amba_device("rtc-pl031", base, irq, NULL, 0);
+	return dbx500_add_amba_device(parent, "rtc-pl031", base, irq, NULL, 0);
 }
 
 struct nmk_gpio_platform_data;
 
-void dbx500_add_gpios(resource_size_t *base, int num, int irq,
-		      struct nmk_gpio_platform_data *pdata);
+void dbx500_add_gpios(struct device *parent, resource_size_t *base, int num,
+		      int irq, struct nmk_gpio_platform_data *pdata);
 
 #endif
diff --git a/arch/arm/mach-ux500/devices-db5500.h b/arch/arm/mach-ux500/devices-db5500.h
index 0c4bccd..e709555 100644
--- a/arch/arm/mach-ux500/devices-db5500.h
+++ b/arch/arm/mach-ux500/devices-db5500.h
@@ -10,70 +10,90 @@
 
 #include "devices-common.h"
 
-#define db5500_add_i2c1(pdata) \
-	dbx500_add_i2c(1, U5500_I2C1_BASE, IRQ_DB5500_I2C1, pdata)
-#define db5500_add_i2c2(pdata) \
-	dbx500_add_i2c(2, U5500_I2C2_BASE, IRQ_DB5500_I2C2, pdata)
-#define db5500_add_i2c3(pdata) \
-	dbx500_add_i2c(3, U5500_I2C3_BASE, IRQ_DB5500_I2C3, pdata)
+#define db5500_add_i2c1(parent, pdata) \
+	dbx500_add_i2c(parent, 1, U5500_I2C1_BASE, IRQ_DB5500_I2C1, pdata)
+#define db5500_add_i2c2(parent, pdata) \
+	dbx500_add_i2c(parent, 2, U5500_I2C2_BASE, IRQ_DB5500_I2C2, pdata)
+#define db5500_add_i2c3(parent, pdata) \
+	dbx500_add_i2c(parent, 3, U5500_I2C3_BASE, IRQ_DB5500_I2C3, pdata)
 
-#define db5500_add_msp0_i2s(pdata) \
-	dbx500_add_msp_i2s(0, U5500_MSP0_BASE, IRQ_DB5500_MSP0, pdata)
-#define db5500_add_msp1_i2s(pdata) \
-	dbx500_add_msp_i2s(1, U5500_MSP1_BASE, IRQ_DB5500_MSP1, pdata)
-#define db5500_add_msp2_i2s(pdata) \
-	dbx500_add_msp_i2s(2, U5500_MSP2_BASE, IRQ_DB5500_MSP2, pdata)
+#define db5500_add_msp0_spi(parent, pdata) \
+	dbx500_add_msp_spi(parent, "msp0", U5500_MSP0_BASE, \
+			   IRQ_DB5500_MSP0, pdata)
+#define db5500_add_msp1_spi(parent, pdata) \
+	dbx500_add_msp_spi(parent, "msp1", U5500_MSP1_BASE, \
+			   IRQ_DB5500_MSP1, pdata)
+#define db5500_add_msp2_spi(parent, pdata) \
+	dbx500_add_msp_spi(parent, "msp2", U5500_MSP2_BASE, \
+			   IRQ_DB5500_MSP2, pdata)
 
-#define db5500_add_msp0_spi(pdata) \
-	dbx500_add_msp_spi("msp0", U5500_MSP0_BASE, IRQ_DB5500_MSP0, pdata)
-#define db5500_add_msp1_spi(pdata) \
-	dbx500_add_msp_spi("msp1", U5500_MSP1_BASE, IRQ_DB5500_MSP1, pdata)
-#define db5500_add_msp2_spi(pdata) \
-	dbx500_add_msp_spi("msp2", U5500_MSP2_BASE, IRQ_DB5500_MSP2, pdata)
+#define db5500_add_msp0_spi(parent, pdata) \
+	dbx500_add_msp_spi(parent, "msp0", U5500_MSP0_BASE, \
+			  IRQ_DB5500_MSP0, pdata)
+#define db5500_add_msp1_spi(parent, pdata) \
+	dbx500_add_msp_spi(parent, "msp1", U5500_MSP1_BASE, \
+			  IRQ_DB5500_MSP1, pdata)
+#define db5500_add_msp2_spi(parent, pdata) \
+	dbx500_add_msp_spi(parent, "msp2", U5500_MSP2_BASE, \
+			  IRQ_DB5500_MSP2, pdata)
 
-#define db5500_add_rtc() \
-	dbx500_add_rtc(U5500_RTC_BASE, IRQ_DB5500_RTC);
+#define db5500_add_rtc(parent) \
+	dbx500_add_rtc(parent, U5500_RTC_BASE, IRQ_DB5500_RTC);
 
-#define db5500_add_usb(rx_cfg, tx_cfg) \
-	ux500_add_usb(U5500_USBOTG_BASE, IRQ_DB5500_USBOTG, rx_cfg, tx_cfg)
+#define db5500_add_usb(parent, rx_cfg, tx_cfg) \
+	ux500_add_usb(parent, U5500_USBOTG_BASE, \
+		      IRQ_DB5500_USBOTG, rx_cfg, tx_cfg)
 
-#define db5500_add_sdi0(pdata) \
-	dbx500_add_sdi("sdi0", U5500_SDI0_BASE, IRQ_DB5500_SDMMC0, pdata, \
+#define db5500_add_sdi0(parent, pdata) \
+	dbx500_add_sdi(parent, "sdi0", U5500_SDI0_BASE, \
+		       IRQ_DB5500_SDMMC0, pdata,	\
 		       0x10480180)
-#define db5500_add_sdi1(pdata) \
-	dbx500_add_sdi("sdi1", U5500_SDI1_BASE, IRQ_DB5500_SDMMC1, pdata, \
+#define db5500_add_sdi1(parent, pdata) \
+	dbx500_add_sdi(parent, "sdi1", U5500_SDI1_BASE, \
+		       IRQ_DB5500_SDMMC1, pdata,	\
 		       0x10480180)
-#define db5500_add_sdi2(pdata) \
-	dbx500_add_sdi("sdi2", U5500_SDI2_BASE, IRQ_DB5500_SDMMC2, pdata \
+#define db5500_add_sdi2(parent, pdata) \
+	dbx500_add_sdi(parent, "sdi2", U5500_SDI2_BASE, \
+		       IRQ_DB5500_SDMMC2, pdata		\
 		       0x10480180)
-#define db5500_add_sdi3(pdata) \
-	dbx500_add_sdi("sdi3", U5500_SDI3_BASE, IRQ_DB5500_SDMMC3, pdata \
+#define db5500_add_sdi3(parent, pdata) \
+	dbx500_add_sdi(parent, "sdi3", U5500_SDI3_BASE, \
+		       IRQ_DB5500_SDMMC3, pdata		\
 		       0x10480180)
-#define db5500_add_sdi4(pdata) \
-	dbx500_add_sdi("sdi4", U5500_SDI4_BASE, IRQ_DB5500_SDMMC4, pdata \
+#define db5500_add_sdi4(parent, pdata) \
+	dbx500_add_sdi(parent, "sdi4", U5500_SDI4_BASE, \
+		       IRQ_DB5500_SDMMC4, pdata		\
 		       0x10480180)
 
 /* This one has a bad peripheral ID in the U5500 silicon */
-#define db5500_add_spi0(pdata) \
-	dbx500_add_spi("spi0", U5500_SPI0_BASE, IRQ_DB5500_SPI0, pdata, \
+#define db5500_add_spi0(parent, pdata) \
+	dbx500_add_spi(parent, "spi0", U5500_SPI0_BASE, \
+		       IRQ_DB5500_SPI0, pdata,		\
 		       0x10080023)
-#define db5500_add_spi1(pdata) \
-	dbx500_add_spi("spi1", U5500_SPI1_BASE, IRQ_DB5500_SPI1, pdata, \
+#define db5500_add_spi1(parent, pdata) \
+	dbx500_add_spi(parent, "spi1", U5500_SPI1_BASE, \
+		       IRQ_DB5500_SPI1, pdata,		\
 		       0x10080023)
-#define db5500_add_spi2(pdata) \
-	dbx500_add_spi("spi2", U5500_SPI2_BASE, IRQ_DB5500_SPI2, pdata \
+#define db5500_add_spi2(parent, pdata) \
+	dbx500_add_spi(parent, "spi2", U5500_SPI2_BASE, \
+		       IRQ_DB5500_SPI2, pdata		\
 		       0x10080023)
-#define db5500_add_spi3(pdata) \
-	dbx500_add_spi("spi3", U5500_SPI3_BASE, IRQ_DB5500_SPI3, pdata \
+#define db5500_add_spi3(parent, pdata) \
+	dbx500_add_spi(parent, "spi3", U5500_SPI3_BASE, \
+		       IRQ_DB5500_SPI3, pdata		\
 		       0x10080023)
 
-#define db5500_add_uart0(plat) \
-	dbx500_add_uart("uart0", U5500_UART0_BASE, IRQ_DB5500_UART0, plat)
-#define db5500_add_uart1(plat) \
-	dbx500_add_uart("uart1", U5500_UART1_BASE, IRQ_DB5500_UART1, plat)
-#define db5500_add_uart2(plat) \
-	dbx500_add_uart("uart2", U5500_UART2_BASE, IRQ_DB5500_UART2, plat)
-#define db5500_add_uart3(plat) \
-	dbx500_add_uart("uart3", U5500_UART3_BASE, IRQ_DB5500_UART3, plat)
+#define db5500_add_uart0(parent, plat) \
+	dbx500_add_uart(parent, "uart0", U5500_UART0_BASE, \
+			IRQ_DB5500_UART0, plat)
+#define db5500_add_uart1(parent, plat) \
+	dbx500_add_uart(parent, "uart1", U5500_UART1_BASE, \
+			IRQ_DB5500_UART1, plat)
+#define db5500_add_uart2(parent, plat) \
+	dbx500_add_uart(parent, "uart2", U5500_UART2_BASE, \
+			IRQ_DB5500_UART2, plat)
+#define db5500_add_uart3(parent, plat) \
+	dbx500_add_uart(parent, "uart3", U5500_UART3_BASE, \
+			IRQ_DB5500_UART3, plat)
 
 #endif
diff --git a/arch/arm/mach-ux500/devices-db8500.h b/arch/arm/mach-ux500/devices-db8500.h
index cbd4a9a..9bd08ad 100644
--- a/arch/arm/mach-ux500/devices-db8500.h
+++ b/arch/arm/mach-ux500/devices-db8500.h
@@ -14,7 +14,9 @@ struct ske_keypad_platform_data;
 struct pl022_ssp_controller;
 
 static inline struct platform_device *
-db8500_add_ske_keypad(struct ske_keypad_platform_data *pdata)
+db8500_add_ske_keypad(struct device *parent,
+		      struct ske_keypad_platform_data *pdata,
+		      size_t size)
 {
 	return dbx500_add_platform_device_4k1irq("nmk-ske-keypad", -1,
 						 U8500_SKE_BASE,
@@ -22,80 +24,100 @@ db8500_add_ske_keypad(struct ske_keypad_platform_data *pdata)
 }
 
 static inline struct amba_device *
-db8500_add_ssp(const char *name, resource_size_t base, int irq,
-	       struct pl022_ssp_controller *pdata)
+db8500_add_ssp(struct device *parent, const char *name, resource_size_t base,
+	       int irq, struct pl022_ssp_controller *pdata)
 {
-	return dbx500_add_amba_device(name, base, irq, pdata, 0);
+	return dbx500_add_amba_device(parent, name, base, irq, pdata, 0);
 }
 
 
-#define db8500_add_i2c0(pdata) \
-	dbx500_add_i2c(0, U8500_I2C0_BASE, IRQ_DB8500_I2C0, pdata)
-#define db8500_add_i2c1(pdata) \
-	dbx500_add_i2c(1, U8500_I2C1_BASE, IRQ_DB8500_I2C1, pdata)
-#define db8500_add_i2c2(pdata) \
-	dbx500_add_i2c(2, U8500_I2C2_BASE, IRQ_DB8500_I2C2, pdata)
-#define db8500_add_i2c3(pdata) \
-	dbx500_add_i2c(3, U8500_I2C3_BASE, IRQ_DB8500_I2C3, pdata)
-#define db8500_add_i2c4(pdata) \
-	dbx500_add_i2c(4, U8500_I2C4_BASE, IRQ_DB8500_I2C4, pdata)
-
-#define db8500_add_msp0_i2s(pdata) \
-	dbx500_add_msp_i2s(0, U8500_MSP0_BASE, IRQ_DB8500_MSP0, pdata)
-#define db8500_add_msp1_i2s(pdata) \
-	dbx500_add_msp_i2s(1, U8500_MSP1_BASE, IRQ_DB8500_MSP1, pdata)
-#define db8500_add_msp2_i2s(pdata) \
-	dbx500_add_msp_i2s(2, U8500_MSP2_BASE, IRQ_DB8500_MSP2, pdata)
-#define db8500_add_msp3_i2s(pdata) \
-	dbx500_add_msp_i2s(3, U8500_MSP3_BASE, IRQ_DB8500_MSP1, pdata)
-
-#define db8500_add_msp0_spi(pdata) \
-	dbx500_add_msp_spi("msp0", U8500_MSP0_BASE, IRQ_DB8500_MSP0, pdata)
-#define db8500_add_msp1_spi(pdata) \
-	dbx500_add_msp_spi("msp1", U8500_MSP1_BASE, IRQ_DB8500_MSP1, pdata)
-#define db8500_add_msp2_spi(pdata) \
-	dbx500_add_msp_spi("msp2", U8500_MSP2_BASE, IRQ_DB8500_MSP2, pdata)
-#define db8500_add_msp3_spi(pdata) \
-	dbx500_add_msp_spi("msp3", U8500_MSP3_BASE, IRQ_DB8500_MSP1, pdata)
-
-#define db8500_add_rtc() \
-	dbx500_add_rtc(U8500_RTC_BASE, IRQ_DB8500_RTC);
-
-#define db8500_add_usb(rx_cfg, tx_cfg) \
-	ux500_add_usb(U8500_USBOTG_BASE, IRQ_DB8500_USBOTG, rx_cfg, tx_cfg)
-
-#define db8500_add_sdi0(pdata, pid) \
-	dbx500_add_sdi("sdi0", U8500_SDI0_BASE, IRQ_DB8500_SDMMC0, pdata, pid)
-#define db8500_add_sdi1(pdata, pid) \
-	dbx500_add_sdi("sdi1", U8500_SDI1_BASE, IRQ_DB8500_SDMMC1, pdata, pid)
-#define db8500_add_sdi2(pdata, pid) \
-	dbx500_add_sdi("sdi2", U8500_SDI2_BASE, IRQ_DB8500_SDMMC2, pdata, pid)
-#define db8500_add_sdi3(pdata, pid) \
-	dbx500_add_sdi("sdi3", U8500_SDI3_BASE, IRQ_DB8500_SDMMC3, pdata, pid)
-#define db8500_add_sdi4(pdata, pid) \
-	dbx500_add_sdi("sdi4", U8500_SDI4_BASE, IRQ_DB8500_SDMMC4, pdata, pid)
-#define db8500_add_sdi5(pdata, pid) \
-	dbx500_add_sdi("sdi5", U8500_SDI5_BASE, IRQ_DB8500_SDMMC5, pdata, pid)
-
-#define db8500_add_ssp0(pdata) \
-	db8500_add_ssp("ssp0", U8500_SSP0_BASE, IRQ_DB8500_SSP0, pdata)
-#define db8500_add_ssp1(pdata) \
-	db8500_add_ssp("ssp1", U8500_SSP1_BASE, IRQ_DB8500_SSP1, pdata)
-
-#define db8500_add_spi0(pdata) \
-	dbx500_add_spi("spi0", U8500_SPI0_BASE, IRQ_DB8500_SPI0, pdata, 0)
-#define db8500_add_spi1(pdata) \
-	dbx500_add_spi("spi1", U8500_SPI1_BASE, IRQ_DB8500_SPI1, pdata, 0)
-#define db8500_add_spi2(pdata) \
-	dbx500_add_spi("spi2", U8500_SPI2_BASE, IRQ_DB8500_SPI2, pdata, 0)
-#define db8500_add_spi3(pdata) \
-	dbx500_add_spi("spi3", U8500_SPI3_BASE, IRQ_DB8500_SPI3, pdata, 0)
-
-#define db8500_add_uart0(pdata) \
-	dbx500_add_uart("uart0", U8500_UART0_BASE, IRQ_DB8500_UART0, pdata)
-#define db8500_add_uart1(pdata) \
-	dbx500_add_uart("uart1", U8500_UART1_BASE, IRQ_DB8500_UART1, pdata)
-#define db8500_add_uart2(pdata) \
-	dbx500_add_uart("uart2", U8500_UART2_BASE, IRQ_DB8500_UART2, pdata)
+#define db8500_add_i2c0(parent, pdata) \
+	dbx500_add_i2c(parent, 0, U8500_I2C0_BASE, IRQ_DB8500_I2C0, pdata)
+#define db8500_add_i2c1(parent, pdata) \
+	dbx500_add_i2c(parent, 1, U8500_I2C1_BASE, IRQ_DB8500_I2C1, pdata)
+#define db8500_add_i2c2(parent, pdata) \
+	dbx500_add_i2c(parent, 2, U8500_I2C2_BASE, IRQ_DB8500_I2C2, pdata)
+#define db8500_add_i2c3(parent, pdata) \
+	dbx500_add_i2c(parent, 3, U8500_I2C3_BASE, IRQ_DB8500_I2C3, pdata)
+#define db8500_add_i2c4(parent, pdata) \
+	dbx500_add_i2c(parent, 4, U8500_I2C4_BASE, IRQ_DB8500_I2C4, pdata)
+
+#define db8500_add_msp0_i2s(parent, pdata) \
+	dbx500_add_msp_i2s(parent, 0, U8500_MSP0_BASE, IRQ_DB8500_MSP0, pdata)
+#define db8500_add_msp1_i2s(parent, pdata) \
+	dbx500_add_msp_i2s(parent, 1, U8500_MSP1_BASE, IRQ_DB8500_MSP1, pdata)
+#define db8500_add_msp2_i2s(parent, pdata) \
+	dbx500_add_msp_i2s(parent, 2, U8500_MSP2_BASE, IRQ_DB8500_MSP2, pdata)
+#define db8500_add_msp3_i2s(parent, pdata) \
+	dbx500_add_msp_i2s(parent, 3, U8500_MSP3_BASE, IRQ_DB8500_MSP1, pdata)
+
+#define db8500_add_msp0_spi(parent, pdata) \
+	dbx500_add_msp_spi(parent, "msp0", U8500_MSP0_BASE, \
+			   IRQ_DB8500_MSP0, pdata)
+#define db8500_add_msp1_spi(parent, pdata) \
+	dbx500_add_msp_spi(parent, "msp1", U8500_MSP1_BASE, \
+			   IRQ_DB8500_MSP1, pdata)
+#define db8500_add_msp2_spi(parent, pdata) \
+	dbx500_add_msp_spi(parent, "msp2", U8500_MSP2_BASE, \
+			   IRQ_DB8500_MSP2, pdata)
+#define db8500_add_msp3_spi(parent, pdata) \
+	dbx500_add_msp_spi(parent, "msp3", U8500_MSP3_BASE, \
+			   IRQ_DB8500_MSP1, pdata)
+
+#define db8500_add_rtc(parent) \
+	dbx500_add_rtc(parent, U8500_RTC_BASE, IRQ_DB8500_RTC);
+
+#define db8500_add_usb(parent, rx_cfg, tx_cfg) \
+	ux500_add_usb(parent, U8500_USBOTG_BASE, \
+		      IRQ_DB8500_USBOTG, rx_cfg, tx_cfg)
+
+#define db8500_add_sdi0(parent, pdata, pid) \
+	dbx500_add_sdi(parent, "sdi0", U8500_SDI0_BASE, \
+		       IRQ_DB8500_SDMMC0, pdata, pid)
+#define db8500_add_sdi1(parent, pdata, pid) \
+	dbx500_add_sdi(parent, "sdi1", U8500_SDI1_BASE, \
+		       IRQ_DB8500_SDMMC1, pdata, pid)
+#define db8500_add_sdi2(parent, pdata, pid) \
+	dbx500_add_sdi(parent, "sdi2", U8500_SDI2_BASE, \
+		       IRQ_DB8500_SDMMC2, pdata, pid)
+#define db8500_add_sdi3(parent, pdata, pid) \
+	dbx500_add_sdi(parent, "sdi3", U8500_SDI3_BASE, \
+		       IRQ_DB8500_SDMMC3, pdata, pid)
+#define db8500_add_sdi4(parent, pdata, pid) \
+	dbx500_add_sdi(parent, "sdi4", U8500_SDI4_BASE, \
+		       IRQ_DB8500_SDMMC4, pdata, pid)
+#define db8500_add_sdi5(parent, pdata, pid) \
+	dbx500_add_sdi(parent, "sdi5", U8500_SDI5_BASE, \
+		       IRQ_DB8500_SDMMC5, pdata, pid)
+
+#define db8500_add_ssp0(parent, pdata) \
+	db8500_add_ssp(parent, "ssp0", U8500_SSP0_BASE, \
+		       IRQ_DB8500_SSP0, pdata)
+#define db8500_add_ssp1(parent, pdata) \
+	db8500_add_ssp(parent, "ssp1", U8500_SSP1_BASE, \
+		       IRQ_DB8500_SSP1, pdata)
+
+#define db8500_add_spi0(parent, pdata) \
+	dbx500_add_spi(parent, "spi0", U8500_SPI0_BASE, \
+		       IRQ_DB8500_SPI0, pdata, 0)
+#define db8500_add_spi1(parent, pdata) \
+	dbx500_add_spi(parent, "spi1", U8500_SPI1_BASE, \
+		       IRQ_DB8500_SPI1, pdata, 0)
+#define db8500_add_spi2(parent, pdata) \
+	dbx500_add_spi(parent, "spi2", U8500_SPI2_BASE, \
+		       IRQ_DB8500_SPI2, pdata, 0)
+#define db8500_add_spi3(parent, pdata) \
+	dbx500_add_spi(parent, "spi3", U8500_SPI3_BASE, \
+		       IRQ_DB8500_SPI3, pdata, 0)
+
+#define db8500_add_uart0(parent, pdata) \
+	dbx500_add_uart(parent, "uart0", U8500_UART0_BASE, \
+			IRQ_DB8500_UART0, pdata)
+#define db8500_add_uart1(parent, pdata) \
+	dbx500_add_uart(parent, "uart1", U8500_UART1_BASE, \
+			IRQ_DB8500_UART1, pdata)
+#define db8500_add_uart2(parent, pdata) \
+	dbx500_add_uart(parent, "uart2", U8500_UART2_BASE, \
+			IRQ_DB8500_UART2, pdata)
 
 #endif
diff --git a/arch/arm/mach-ux500/dma-db5500.c b/arch/arm/mach-ux500/dma-db5500.c
index 1cfab68..41e9470 100644
--- a/arch/arm/mach-ux500/dma-db5500.c
+++ b/arch/arm/mach-ux500/dma-db5500.c
@@ -125,10 +125,11 @@ static struct platform_device dma40_device = {
 	.resource	= dma40_resources
 };
 
-void __init db5500_dma_init(void)
+void __init db5500_dma_init(struct device *parent)
 {
 	int ret;
 
+	dma40_device.dev.parent = parent;
 	ret = platform_device_register(&dma40_device);
 	if (ret)
 		dev_err(&dma40_device.dev, "unable to register device: %d\n", ret);
diff --git a/arch/arm/mach-ux500/include/mach/setup.h b/arch/arm/mach-ux500/include/mach/setup.h
index a7d363f..e46b8b1 100644
--- a/arch/arm/mach-ux500/include/mach/setup.h
+++ b/arch/arm/mach-ux500/include/mach/setup.h
@@ -18,14 +18,14 @@ void __init ux500_map_io(void);
 extern void __init u5500_map_io(void);
 extern void __init u8500_map_io(void);
 
-extern void __init u5500_init_devices(void);
-extern void __init u8500_init_devices(void);
+extern struct device * __init u5500_init_devices(void);
+extern struct device * __init u8500_init_devices(void);
 
 extern void __init ux500_init_irq(void);
 
-extern void __init u5500_sdi_init(void);
+extern void __init u5500_sdi_init(struct device *parent);
 
-extern void __init db5500_dma_init(void);
+extern void __init db5500_dma_init(struct device *parent);
 
 /* We re-use nomadik_timer for this platform */
 extern void nmdk_timer_init(void);
diff --git a/arch/arm/mach-ux500/include/mach/usb.h b/arch/arm/mach-ux500/include/mach/usb.h
index d3739d4..4c1cc50 100644
--- a/arch/arm/mach-ux500/include/mach/usb.h
+++ b/arch/arm/mach-ux500/include/mach/usb.h
@@ -20,6 +20,6 @@ struct ux500_musb_board_data {
 	bool (*dma_filter)(struct dma_chan *chan, void *filter_param);
 };
 
-void ux500_add_usb(resource_size_t base, int irq, int *dma_rx_cfg,
-	int *dma_tx_cfg);
+void ux500_add_usb(struct device *parent, resource_size_t base,
+		   int irq, int *dma_rx_cfg, int *dma_tx_cfg);
 #endif
diff --git a/arch/arm/mach-ux500/usb.c b/arch/arm/mach-ux500/usb.c
index 0a01cbd..bef6a31 100644
--- a/arch/arm/mach-ux500/usb.c
+++ b/arch/arm/mach-ux500/usb.c
@@ -146,8 +146,8 @@ static inline void ux500_usb_dma_update_tx_ch_config(int *dst_dev_type)
 		musb_dma_tx_ch[idx].dst_dev_type = dst_dev_type[idx];
 }
 
-void ux500_add_usb(resource_size_t base, int irq, int *dma_rx_cfg,
-	int *dma_tx_cfg)
+void ux500_add_usb(struct device *parent, resource_size_t base, int irq,
+		   int *dma_rx_cfg, int *dma_tx_cfg)
 {
 	ux500_musb_device.resource[0].start = base;
 	ux500_musb_device.resource[0].end = base + SZ_64K - 1;
-- 
1.7.5.4

[PATCH 0/6] ux500: Export SoC information and some platform clean-up

[Lee Jones]

This patch-set satisfies 4 objectives:
 1. Ensures each platform device can specify a suitable parent
 2. Provides a bus for SoC devices as a means to export information
 3. Allows ux500 to make use of the new SoC bus
 4. Cleans up unnecessary complexity from ux500 code

---
 Documentation/ABI/testing/sysfs-devices-soc    |   58 ++++++++
 arch/arm/mach-ux500/Kconfig                    |    1 +
 arch/arm/mach-ux500/board-mop500-sdi.c         |   31 ++--
 arch/arm/mach-ux500/board-mop500.c             |   74 ++++++----
 arch/arm/mach-ux500/board-mop500.h             |    8 +-
 arch/arm/mach-ux500/board-u5500-sdi.c          |    4 +-
 arch/arm/mach-ux500/board-u5500.c              |   27 ++--
 arch/arm/mach-ux500/cpu-db5500.c               |   36 ++++-
 arch/arm/mach-ux500/cpu-db8500.c               |   44 +++++-
 arch/arm/mach-ux500/cpu.c                      |   75 ++++++++++
 arch/arm/mach-ux500/devices-common.c           |   79 ++--------
 arch/arm/mach-ux500/devices-common.h           |   83 ++++++-----
 arch/arm/mach-ux500/devices-db5500.h           |  116 +++++++++------
 arch/arm/mach-ux500/devices-db8500.h           |  176 +++++++++++++----------
 arch/arm/mach-ux500/dma-db5500.c               |    3 +-
 arch/arm/mach-ux500/include/mach/db8500-regs.h |    3 +
 arch/arm/mach-ux500/include/mach/setup.h       |   10 +-
 arch/arm/mach-ux500/include/mach/usb.h         |    4 +-
 arch/arm/mach-ux500/usb.c                      |    7 +-
 drivers/base/Kconfig                           |    3 +
 drivers/base/Makefile                          |    1 +
 drivers/base/soc.c                             |  186 ++++++++++++++++++++++++
 include/linux/syssoc.h                         |   74 ++++++++++
 23 files changed, 799 insertions(+), 304 deletions(-)

[PATCH 1/6] mach-ux500: pass parent pointer to each platform device

[Lee Jones]

This patch provides a means for any device within ux500
platform code to allocate its own parent. This is particularly
prudent with the introduction of /sys/devices/socX, as a
device can now proclaim to be integral part of an SoC, rather
than a more generic platform device. Latter patches make good
use of this functionality.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 arch/arm/mach-ux500/board-mop500-sdi.c   |   31 +++---
 arch/arm/mach-ux500/board-mop500.c       |   62 ++++++-----
 arch/arm/mach-ux500/board-mop500.h       |    8 +-
 arch/arm/mach-ux500/board-u5500-sdi.c    |    4 +-
 arch/arm/mach-ux500/board-u5500.c        |   23 +++--
 arch/arm/mach-ux500/cpu-db5500.c         |   18 ++--
 arch/arm/mach-ux500/cpu-db8500.c         |   15 ++--
 arch/arm/mach-ux500/devices-common.c     |   13 ++-
 arch/arm/mach-ux500/devices-common.h     |   39 ++++---
 arch/arm/mach-ux500/devices-db5500.h     |  116 ++++++++++++---------
 arch/arm/mach-ux500/devices-db8500.h     |  166 +++++++++++++++++-------------
 arch/arm/mach-ux500/dma-db5500.c         |    3 +-
 arch/arm/mach-ux500/include/mach/setup.h |    8 +-
 arch/arm/mach-ux500/include/mach/usb.h   |    4 +-
 arch/arm/mach-ux500/usb.c                |    4 +-
 15 files changed, 289 insertions(+), 225 deletions(-)

diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c
index 23be34b..163c083 100644
--- a/arch/arm/mach-ux500/board-mop500-sdi.c
+++ b/arch/arm/mach-ux500/board-mop500-sdi.c
@@ -104,7 +104,7 @@ static struct mmci_platform_data mop500_sdi0_data = {
 #endif
 };
 
-static void sdi0_configure(void)
+static void sdi0_configure(struct device *parent)
 {
 	int ret;
 
@@ -123,15 +123,15 @@ static void sdi0_configure(void)
 	gpio_direction_output(sdi0_en, 1);
 
 	/* Add the device, force v2 to subrevision 1 */
-	db8500_add_sdi0(&mop500_sdi0_data, U8500_SDI_V2_PERIPHID);
+	db8500_add_sdi0(parent, &mop500_sdi0_data, U8500_SDI_V2_PERIPHID);
 }
 
-void mop500_sdi_tc35892_init(void)
+void mop500_sdi_tc35892_init(struct device *parent)
 {
 	mop500_sdi0_data.gpio_cd = GPIO_SDMMC_CD;
 	sdi0_en = GPIO_SDMMC_EN;
 	sdi0_vsel = GPIO_SDMMC_1V8_3V_SEL;
-	sdi0_configure();
+	sdi0_configure(parent);
 }
 
 /*
@@ -246,12 +246,13 @@ static struct mmci_platform_data mop500_sdi4_data = {
 #endif
 };
 
-void __init mop500_sdi_init(void)
+void __init mop500_sdi_init(struct device *parent)
 {
 	/* PoP:ed eMMC */
-	db8500_add_sdi2(&mop500_sdi2_data, U8500_SDI_V2_PERIPHID);
+	db8500_add_sdi2(parent, &mop500_sdi2_data, U8500_SDI_V2_PERIPHID);
 	/* On-board eMMC */
-	db8500_add_sdi4(&mop500_sdi4_data, U8500_SDI_V2_PERIPHID);
+	db8500_add_sdi4(parent, &mop500_sdi4_data, U8500_SDI_V2_PERIPHID);
+
 	/*
 	 * On boards with the TC35892 GPIO expander, sdi0 will finally
 	 * be added when the TC35892 initializes and calls
@@ -259,29 +260,29 @@ void __init mop500_sdi_init(void)
 	 */
 }
 
-void __init snowball_sdi_init(void)
+void __init snowball_sdi_init(struct device *parent)
 {
 	/* On-board eMMC */
-	db8500_add_sdi4(&mop500_sdi4_data, U8500_SDI_V2_PERIPHID);
+	db8500_add_sdi4(parent, &mop500_sdi4_data, U8500_SDI_V2_PERIPHID);
 	/* External Micro SD slot */
 	mop500_sdi0_data.gpio_cd = SNOWBALL_SDMMC_CD_GPIO;
 	mop500_sdi0_data.cd_invert = true;
 	sdi0_en = SNOWBALL_SDMMC_EN_GPIO;
 	sdi0_vsel = SNOWBALL_SDMMC_1V8_3V_GPIO;
-	sdi0_configure();
+	sdi0_configure(parent);
 }
 
-void __init hrefv60_sdi_init(void)
+void __init hrefv60_sdi_init(struct device *parent)
 {
 	/* PoP:ed eMMC */
-	db8500_add_sdi2(&mop500_sdi2_data, U8500_SDI_V2_PERIPHID);
+	db8500_add_sdi2(parent, &mop500_sdi2_data, U8500_SDI_V2_PERIPHID);
 	/* On-board eMMC */
-	db8500_add_sdi4(&mop500_sdi4_data, U8500_SDI_V2_PERIPHID);
+	db8500_add_sdi4(parent, &mop500_sdi4_data, U8500_SDI_V2_PERIPHID);
 	/* External Micro SD slot */
 	mop500_sdi0_data.gpio_cd = HREFV60_SDMMC_CD_GPIO;
 	sdi0_en = HREFV60_SDMMC_EN_GPIO;
 	sdi0_vsel = HREFV60_SDMMC_1V8_3V_GPIO;
-	sdi0_configure();
+	sdi0_configure(parent);
 	/* WLAN SDIO channel */
-	db8500_add_sdi1(&mop500_sdi1_data, U8500_SDI_V2_PERIPHID);
+	db8500_add_sdi1(parent, &mop500_sdi1_data, U8500_SDI_V2_PERIPHID);
 }
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index 5c00712..f9ce2a1 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -226,7 +226,12 @@ static struct tps6105x_platform_data mop500_tps61052_data = {
 
 static void mop500_tc35892_init(struct tc3589x *tc3589x, unsigned int base)
 {
-	mop500_sdi_tc35892_init();
+	struct device *parent = NULL;
+#if 0
+	/* FIXME: Is the sdi actually part of tc3589x? */
+	parent = tc3589x->dev;
+#endif
+	mop500_sdi_tc35892_init(parent);
 }
 
 static struct tc3589x_gpio_platform_data mop500_tc35892_gpio_data = {
@@ -353,12 +358,12 @@ U8500_I2C_CONTROLLER(1, 0xe, 1, 8, 100000, 200, I2C_FREQ_MODE_FAST);
 U8500_I2C_CONTROLLER(2,	0xe, 1, 8, 100000, 200, I2C_FREQ_MODE_FAST);
 U8500_I2C_CONTROLLER(3,	0xe, 1, 8, 100000, 200, I2C_FREQ_MODE_FAST);
 
-static void __init mop500_i2c_init(void)
+static void __init mop500_i2c_init(struct device *parent)
 {
-	db8500_add_i2c0(&u8500_i2c0_data);
-	db8500_add_i2c1(&u8500_i2c1_data);
-	db8500_add_i2c2(&u8500_i2c2_data);
-	db8500_add_i2c3(&u8500_i2c3_data);
+	db8500_add_i2c0(parent, &u8500_i2c0_data);
+	db8500_add_i2c1(parent, &u8500_i2c1_data);
+	db8500_add_i2c2(parent, &u8500_i2c2_data);
+	db8500_add_i2c3(parent, &u8500_i2c3_data);
 }
 
 static struct gpio_keys_button mop500_gpio_keys[] = {
@@ -451,9 +456,9 @@ static struct pl022_ssp_controller ssp0_platform_data = {
 	.num_chipselect = 5,
 };
 
-static void __init mop500_spi_init(void)
+static void __init mop500_spi_init(struct device *parent)
 {
-	db8500_add_ssp0(&ssp0_platform_data);
+	db8500_add_ssp0(parent, &ssp0_platform_data);
 }
 
 #ifdef CONFIG_STE_DMA40
@@ -587,11 +592,11 @@ static struct amba_pl011_data uart2_plat = {
 #endif
 };
 
-static void __init mop500_uart_init(void)
+static void __init mop500_uart_init(struct device *parent)
 {
-	db8500_add_uart0(&uart0_plat);
-	db8500_add_uart1(&uart1_plat);
-	db8500_add_uart2(&uart2_plat);
+	db8500_add_uart0(parent, &uart0_plat);
+	db8500_add_uart1(parent, &uart1_plat);
+	db8500_add_uart2(parent, &uart2_plat);
 }
 
 static struct platform_device *snowball_platform_devs[] __initdata = {
@@ -603,21 +608,22 @@ static struct platform_device *snowball_platform_devs[] __initdata = {
 
 static void __init mop500_init_machine(void)
 {
+	struct device *parent = NULL;
 	int i2c0_devs;
 
 	mop500_gpio_keys[0].gpio = GPIO_PROX_SENSOR;
 
-	u8500_init_devices();
+	parent = u8500_init_devices();
 
 	mop500_pins_init();
 
 	platform_add_devices(mop500_platform_devs,
 			ARRAY_SIZE(mop500_platform_devs));
 
-	mop500_i2c_init();
-	mop500_sdi_init();
-	mop500_spi_init();
-	mop500_uart_init();
+	mop500_i2c_init(parent);
+	mop500_sdi_init(parent);
+	mop500_spi_init(parent);
+	mop500_uart_init(parent);
 
 	i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
 
@@ -631,19 +637,20 @@ static void __init mop500_init_machine(void)
 
 static void __init snowball_init_machine(void)
 {
+	struct device *parent = NULL;
 	int i2c0_devs;
 
-	u8500_init_devices();
+	parent = u8500_init_devices();
 
 	snowball_pins_init();
 
 	platform_add_devices(snowball_platform_devs,
 			ARRAY_SIZE(snowball_platform_devs));
 
-	mop500_i2c_init();
-	snowball_sdi_init();
-	mop500_spi_init();
-	mop500_uart_init();
+	mop500_i2c_init(parent);
+	snowball_sdi_init(parent);
+	mop500_spi_init(parent);
+	mop500_uart_init(parent);
 
 	i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
 	i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs);
@@ -656,6 +663,7 @@ static void __init snowball_init_machine(void)
 
 static void __init hrefv60_init_machine(void)
 {
+	struct device *parent = NULL;
 	int i2c0_devs;
 
 	/*
@@ -665,17 +673,17 @@ static void __init hrefv60_init_machine(void)
 	 */
 	mop500_gpio_keys[0].gpio = HREFV60_PROX_SENSE_GPIO;
 
-	u8500_init_devices();
+	parent = u8500_init_devices();
 
 	hrefv60_pins_init();
 
 	platform_add_devices(mop500_platform_devs,
 			ARRAY_SIZE(mop500_platform_devs));
 
-	mop500_i2c_init();
-	hrefv60_sdi_init();
-	mop500_spi_init();
-	mop500_uart_init();
+	mop500_i2c_init(parent);
+	hrefv60_sdi_init(parent);
+	mop500_spi_init(parent);
+	mop500_uart_init(parent);
 
 	i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
 
diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h
index f926d3d..3d594c2 100644
--- a/arch/arm/mach-ux500/board-mop500.h
+++ b/arch/arm/mach-ux500/board-mop500.h
@@ -75,10 +75,10 @@
 
 struct i2c_board_info;
 
-extern void mop500_sdi_init(void);
-extern void snowball_sdi_init(void);
-extern void hrefv60_sdi_init(void);
-extern void mop500_sdi_tc35892_init(void);
+extern void mop500_sdi_init(struct device *parent);
+extern void snowball_sdi_init(struct device *parent);
+extern void hrefv60_sdi_init(struct device *parent);
+extern void mop500_sdi_tc35892_init(struct device *parent);
 void __init mop500_u8500uib_init(void);
 void __init mop500_stuib_init(void);
 void __init mop500_pins_init(void);
diff --git a/arch/arm/mach-ux500/board-u5500-sdi.c b/arch/arm/mach-ux500/board-u5500-sdi.c
index 63c3f80..836112e 100644
--- a/arch/arm/mach-ux500/board-u5500-sdi.c
+++ b/arch/arm/mach-ux500/board-u5500-sdi.c
@@ -66,9 +66,9 @@ static struct mmci_platform_data u5500_sdi0_data = {
 #endif
 };
 
-void __init u5500_sdi_init(void)
+void __init u5500_sdi_init(struct device *parent)
 {
 	nmk_config_pins(u5500_sdi_pins, ARRAY_SIZE(u5500_sdi_pins));
 
-	db5500_add_sdi0(&u5500_sdi0_data);
+	db5500_add_sdi0(parent, &u5500_sdi0_data);
 }
diff --git a/arch/arm/mach-ux500/board-u5500.c b/arch/arm/mach-ux500/board-u5500.c
index 9de9e9c..d7a9596 100644
--- a/arch/arm/mach-ux500/board-u5500.c
+++ b/arch/arm/mach-ux500/board-u5500.c
@@ -97,9 +97,9 @@ static struct i2c_board_info __initdata u5500_i2c2_devices[] = {
 	},
 };
 
-static void __init u5500_i2c_init(void)
+static void __init u5500_i2c_init(struct device *parent)
 {
-	db5500_add_i2c2(&u5500_i2c2_data);
+	db5500_add_i2c2(parent, &u5500_i2c2_data);
 	i2c_register_board_info(2, ARRAY_AND_SIZE(u5500_i2c2_devices));
 }
 
@@ -126,20 +126,23 @@ static struct platform_device *u5500_platform_devices[] __initdata = {
 	&ab5500_device,
 };
 
-static void __init u5500_uart_init(void)
+static void __init u5500_uart_init(struct device *parent)
 {
-	db5500_add_uart0(NULL);
-	db5500_add_uart1(NULL);
-	db5500_add_uart2(NULL);
+	db5500_add_uart0(parent, NULL);
+	db5500_add_uart1(parent, NULL);
+	db5500_add_uart2(parent, NULL);
 }
 
 static void __init u5500_init_machine(void)
 {
-	u5500_init_devices();
+	struct device *parent = NULL;
+
+	parent = u5500_init_devices();
 	nmk_config_pins(u5500_pins, ARRAY_SIZE(u5500_pins));
-	u5500_i2c_init();
-	u5500_sdi_init();
-	u5500_uart_init();
+
+	u5500_i2c_init(parent);
+	u5500_sdi_init(parent);
+	u5500_uart_init(parent);
 
 	platform_add_devices(u5500_platform_devices,
 		ARRAY_SIZE(u5500_platform_devices));
diff --git a/arch/arm/mach-ux500/cpu-db5500.c b/arch/arm/mach-ux500/cpu-db5500.c
index 18aa5c0..c402fd6 100644
--- a/arch/arm/mach-ux500/cpu-db5500.c
+++ b/arch/arm/mach-ux500/cpu-db5500.c
@@ -147,13 +147,13 @@ static resource_size_t __initdata db5500_gpio_base[] = {
 	U5500_GPIOBANK7_BASE,
 };
 
-static void __init db5500_add_gpios(void)
+static void __init db5500_add_gpios(struct device *parent)
 {
 	struct nmk_gpio_platform_data pdata = {
 		/* No custom data yet */
 	};
 
-	dbx500_add_gpios(ARRAY_AND_SIZE(db5500_gpio_base),
+	dbx500_add_gpios(parent, ARRAY_AND_SIZE(db5500_gpio_base),
 			 IRQ_DB5500_GPIO0, &pdata);
 }
 
@@ -212,14 +212,18 @@ static int usb_db5500_tx_dma_cfg[] = {
 	DB5500_DMA_DEV38_USB_OTG_OEP_8
 };
 
-void __init u5500_init_devices(void)
+struct device* __init u5500_init_devices(void)
 {
-	db5500_add_gpios();
+	/* FIXME: First parameter to be a real parent. */
+	db5500_add_gpios(NULL);
 	db5500_pmu_init();
-	db5500_dma_init();
-	db5500_add_rtc();
-	db5500_add_usb(usb_db5500_rx_dma_cfg, usb_db5500_tx_dma_cfg);
+	db5500_dma_init(NULL);
+	db5500_add_rtc(NULL);
+	db5500_add_usb(NULL, usb_db5500_rx_dma_cfg, usb_db5500_tx_dma_cfg);
 
 	platform_add_devices(db5500_platform_devs,
 			     ARRAY_SIZE(db5500_platform_devs));
+
+	/* FIXME: Return value to be a real parent. */
+	return NULL;
 }
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index 7176ee7..1e8a2cb 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -132,13 +132,13 @@ static resource_size_t __initdata db8500_gpio_base[] = {
 	U8500_GPIOBANK8_BASE,
 };
 
-static void __init db8500_add_gpios(void)
+static void __init db8500_add_gpios(struct device *parent)
 {
 	struct nmk_gpio_platform_data pdata = {
 		.supports_sleepmode = true,
 	};
 
-	dbx500_add_gpios(ARRAY_AND_SIZE(db8500_gpio_base),
+	dbx500_add_gpios(parent, ARRAY_AND_SIZE(db8500_gpio_base),
 			 IRQ_DB8500_GPIO0, &pdata);
 }
 
@@ -167,14 +167,15 @@ static int usb_db8500_tx_dma_cfg[] = {
 /*
  * This function is called from the board init
  */
-void __init u8500_init_devices(void)
+struct device* __init u8500_init_devices(void)
 {
-	db8500_add_rtc();
-	db8500_add_gpios();
-	db8500_add_usb(usb_db8500_rx_dma_cfg, usb_db8500_tx_dma_cfg);
+	db8500_add_rtc(NULL);
+	db8500_add_gpios(NULL);
+	db8500_add_usb(NULL, usb_db8500_rx_dma_cfg, usb_db8500_tx_dma_cfg);
 
 	platform_device_register_simple("cpufreq-u8500", -1, NULL, 0);
 	platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs));
 
-	return ;
+	/* FIXME: Return value to be a real parent. */
+	return NULL;
 }
diff --git a/arch/arm/mach-ux500/devices-common.c b/arch/arm/mach-ux500/devices-common.c
index c563e54..96be248 100644
--- a/arch/arm/mach-ux500/devices-common.c
+++ b/arch/arm/mach-ux500/devices-common.c
@@ -20,8 +20,9 @@
 #include "devices-common.h"
 
 struct amba_device *
-dbx500_add_amba_device(const char *name, resource_size_t base,
-		       int irq, void *pdata, unsigned int periphid)
+dbx500_add_amba_device(struct device *parent, const char *name,
+		       resource_size_t base, int irq, void *pdata,
+		       unsigned int periphid)
 {
 	struct amba_device *dev;
 	int ret;
@@ -109,7 +110,7 @@ dbx500_add_platform_device_4k1irq(const char *name, int id,
 }
 
 static struct platform_device *
-dbx500_add_gpio(int id, resource_size_t addr, int irq,
+dbx500_add_gpio(struct device *parent, int id, resource_size_t addr, int irq,
 		struct nmk_gpio_platform_data *pdata)
 {
 	struct resource resources[] = {
@@ -130,8 +131,8 @@ dbx500_add_gpio(int id, resource_size_t addr, int irq,
 				pdata, sizeof(*pdata));
 }
 
-void dbx500_add_gpios(resource_size_t *base, int num, int irq,
-		      struct nmk_gpio_platform_data *pdata)
+void dbx500_add_gpios(struct device *parent, resource_size_t *base, int num,
+		      int irq, struct nmk_gpio_platform_data *pdata)
 {
 	int first = 0;
 	int i;
@@ -141,6 +142,6 @@ void dbx500_add_gpios(resource_size_t *base, int num, int irq,
 		pdata->first_irq = NOMADIK_GPIO_TO_IRQ(first);
 		pdata->num_gpio = 32;
 
-		dbx500_add_gpio(i, base[i], irq, pdata);
+		dbx500_add_gpio(parent, i, base[i], irq, pdata);
 	}
 }
diff --git a/arch/arm/mach-ux500/devices-common.h b/arch/arm/mach-ux500/devices-common.h
index 7825705..f8adff8 100644
--- a/arch/arm/mach-ux500/devices-common.h
+++ b/arch/arm/mach-ux500/devices-common.h
@@ -9,7 +9,7 @@
 #define __DEVICES_COMMON_H
 
 extern struct amba_device *
-dbx500_add_amba_device(const char *name, resource_size_t base,
+dbx500_add_amba_device(struct device *parent, const char *name, resource_size_t base,
 		       int irq, void *pdata, unsigned int periphid);
 
 extern struct platform_device *
@@ -20,43 +20,46 @@ dbx500_add_platform_device_4k1irq(const char *name, int id,
 struct spi_master_cntlr;
 
 static inline struct amba_device *
-dbx500_add_msp_spi(const char *name, resource_size_t base, int irq,
+dbx500_add_msp_spi(struct device *parent, const char *name,
+		   resource_size_t base, int irq,
 		   struct spi_master_cntlr *pdata)
 {
-	return dbx500_add_amba_device(name, base, irq, pdata, 0);
+	return dbx500_add_amba_device(parent, name, base, irq,
+				      pdata, 0);
 }
 
 static inline struct amba_device *
-dbx500_add_spi(const char *name, resource_size_t base, int irq,
-	       struct spi_master_cntlr *pdata,
+dbx500_add_spi(struct device *parent, const char *name, resource_size_t base,
+	       int irq, struct spi_master_cntlr *pdata,
 	       u32 periphid)
 {
-	return dbx500_add_amba_device(name, base, irq, pdata, periphid);
+	return dbx500_add_amba_device(parent, name, base, irq,
+				      pdata, periphid);
 }
 
 struct mmci_platform_data;
 
 static inline struct amba_device *
-dbx500_add_sdi(const char *name, resource_size_t base, int irq,
-	       struct mmci_platform_data *pdata,
-	       u32 periphid)
+dbx500_add_sdi(struct device *parent, const char *name, resource_size_t base,
+	       int irq, struct mmci_platform_data *pdata, u32 periphid)
 {
-	return dbx500_add_amba_device(name, base, irq, pdata, periphid);
+	return dbx500_add_amba_device(parent, name, base, irq,
+				      pdata, periphid);
 }
 
 struct amba_pl011_data;
 
 static inline struct amba_device *
-dbx500_add_uart(const char *name, resource_size_t base, int irq,
-		struct amba_pl011_data *pdata)
+dbx500_add_uart(struct device *parent, const char *name, resource_size_t base,
+		int irq, struct amba_pl011_data *pdata)
 {
-	return dbx500_add_amba_device(name, base, irq, pdata, 0);
+	return dbx500_add_amba_device(parent, name, base, irq, pdata, 0);
 }
 
 struct nmk_i2c_controller;
 
 static inline struct platform_device *
-dbx500_add_i2c(int id, resource_size_t base, int irq,
+dbx500_add_i2c(struct device *parent, int id, resource_size_t base, int irq,
 	       struct nmk_i2c_controller *pdata)
 {
 	return dbx500_add_platform_device_4k1irq("nmk-i2c", id, base, irq,
@@ -74,14 +77,14 @@ dbx500_add_msp_i2s(int id, resource_size_t base, int irq,
 }
 
 static inline struct amba_device *
-dbx500_add_rtc(resource_size_t base, int irq)
+dbx500_add_rtc(struct device *parent, resource_size_t base, int irq)
 {
-	return dbx500_add_amba_device("rtc-pl031", base, irq, NULL, 0);
+	return dbx500_add_amba_device(parent, "rtc-pl031", base, irq, NULL, 0);
 }
 
 struct nmk_gpio_platform_data;
 
-void dbx500_add_gpios(resource_size_t *base, int num, int irq,
-		      struct nmk_gpio_platform_data *pdata);
+void dbx500_add_gpios(struct device *parent, resource_size_t *base, int num,
+		      int irq, struct nmk_gpio_platform_data *pdata);
 
 #endif
diff --git a/arch/arm/mach-ux500/devices-db5500.h b/arch/arm/mach-ux500/devices-db5500.h
index 0c4bccd..e709555 100644
--- a/arch/arm/mach-ux500/devices-db5500.h
+++ b/arch/arm/mach-ux500/devices-db5500.h
@@ -10,70 +10,90 @@
 
 #include "devices-common.h"
 
-#define db5500_add_i2c1(pdata) \
-	dbx500_add_i2c(1, U5500_I2C1_BASE, IRQ_DB5500_I2C1, pdata)
-#define db5500_add_i2c2(pdata) \
-	dbx500_add_i2c(2, U5500_I2C2_BASE, IRQ_DB5500_I2C2, pdata)
-#define db5500_add_i2c3(pdata) \
-	dbx500_add_i2c(3, U5500_I2C3_BASE, IRQ_DB5500_I2C3, pdata)
+#define db5500_add_i2c1(parent, pdata) \
+	dbx500_add_i2c(parent, 1, U5500_I2C1_BASE, IRQ_DB5500_I2C1, pdata)
+#define db5500_add_i2c2(parent, pdata) \
+	dbx500_add_i2c(parent, 2, U5500_I2C2_BASE, IRQ_DB5500_I2C2, pdata)
+#define db5500_add_i2c3(parent, pdata) \
+	dbx500_add_i2c(parent, 3, U5500_I2C3_BASE, IRQ_DB5500_I2C3, pdata)
 
-#define db5500_add_msp0_i2s(pdata) \
-	dbx500_add_msp_i2s(0, U5500_MSP0_BASE, IRQ_DB5500_MSP0, pdata)
-#define db5500_add_msp1_i2s(pdata) \
-	dbx500_add_msp_i2s(1, U5500_MSP1_BASE, IRQ_DB5500_MSP1, pdata)
-#define db5500_add_msp2_i2s(pdata) \
-	dbx500_add_msp_i2s(2, U5500_MSP2_BASE, IRQ_DB5500_MSP2, pdata)
+#define db5500_add_msp0_spi(parent, pdata) \
+	dbx500_add_msp_spi(parent, "msp0", U5500_MSP0_BASE, \
+			   IRQ_DB5500_MSP0, pdata)
+#define db5500_add_msp1_spi(parent, pdata) \
+	dbx500_add_msp_spi(parent, "msp1", U5500_MSP1_BASE, \
+			   IRQ_DB5500_MSP1, pdata)
+#define db5500_add_msp2_spi(parent, pdata) \
+	dbx500_add_msp_spi(parent, "msp2", U5500_MSP2_BASE, \
+			   IRQ_DB5500_MSP2, pdata)
 
-#define db5500_add_msp0_spi(pdata) \
-	dbx500_add_msp_spi("msp0", U5500_MSP0_BASE, IRQ_DB5500_MSP0, pdata)
-#define db5500_add_msp1_spi(pdata) \
-	dbx500_add_msp_spi("msp1", U5500_MSP1_BASE, IRQ_DB5500_MSP1, pdata)
-#define db5500_add_msp2_spi(pdata) \
-	dbx500_add_msp_spi("msp2", U5500_MSP2_BASE, IRQ_DB5500_MSP2, pdata)
+#define db5500_add_msp0_spi(parent, pdata) \
+	dbx500_add_msp_spi(parent, "msp0", U5500_MSP0_BASE, \
+			  IRQ_DB5500_MSP0, pdata)
+#define db5500_add_msp1_spi(parent, pdata) \
+	dbx500_add_msp_spi(parent, "msp1", U5500_MSP1_BASE, \
+			  IRQ_DB5500_MSP1, pdata)
+#define db5500_add_msp2_spi(parent, pdata) \
+	dbx500_add_msp_spi(parent, "msp2", U5500_MSP2_BASE, \
+			  IRQ_DB5500_MSP2, pdata)
 
-#define db5500_add_rtc() \
-	dbx500_add_rtc(U5500_RTC_BASE, IRQ_DB5500_RTC);
+#define db5500_add_rtc(parent) \
+	dbx500_add_rtc(parent, U5500_RTC_BASE, IRQ_DB5500_RTC);
 
-#define db5500_add_usb(rx_cfg, tx_cfg) \
-	ux500_add_usb(U5500_USBOTG_BASE, IRQ_DB5500_USBOTG, rx_cfg, tx_cfg)
+#define db5500_add_usb(parent, rx_cfg, tx_cfg) \
+	ux500_add_usb(parent, U5500_USBOTG_BASE, \
+		      IRQ_DB5500_USBOTG, rx_cfg, tx_cfg)
 
-#define db5500_add_sdi0(pdata) \
-	dbx500_add_sdi("sdi0", U5500_SDI0_BASE, IRQ_DB5500_SDMMC0, pdata, \
+#define db5500_add_sdi0(parent, pdata) \
+	dbx500_add_sdi(parent, "sdi0", U5500_SDI0_BASE, \
+		       IRQ_DB5500_SDMMC0, pdata,	\
 		       0x10480180)
-#define db5500_add_sdi1(pdata) \
-	dbx500_add_sdi("sdi1", U5500_SDI1_BASE, IRQ_DB5500_SDMMC1, pdata, \
+#define db5500_add_sdi1(parent, pdata) \
+	dbx500_add_sdi(parent, "sdi1", U5500_SDI1_BASE, \
+		       IRQ_DB5500_SDMMC1, pdata,	\
 		       0x10480180)
-#define db5500_add_sdi2(pdata) \
-	dbx500_add_sdi("sdi2", U5500_SDI2_BASE, IRQ_DB5500_SDMMC2, pdata \
+#define db5500_add_sdi2(parent, pdata) \
+	dbx500_add_sdi(parent, "sdi2", U5500_SDI2_BASE, \
+		       IRQ_DB5500_SDMMC2, pdata		\
 		       0x10480180)
-#define db5500_add_sdi3(pdata) \
-	dbx500_add_sdi("sdi3", U5500_SDI3_BASE, IRQ_DB5500_SDMMC3, pdata \
+#define db5500_add_sdi3(parent, pdata) \
+	dbx500_add_sdi(parent, "sdi3", U5500_SDI3_BASE, \
+		       IRQ_DB5500_SDMMC3, pdata		\
 		       0x10480180)
-#define db5500_add_sdi4(pdata) \
-	dbx500_add_sdi("sdi4", U5500_SDI4_BASE, IRQ_DB5500_SDMMC4, pdata \
+#define db5500_add_sdi4(parent, pdata) \
+	dbx500_add_sdi(parent, "sdi4", U5500_SDI4_BASE, \
+		       IRQ_DB5500_SDMMC4, pdata		\
 		       0x10480180)
 
 /* This one has a bad peripheral ID in the U5500 silicon */
-#define db5500_add_spi0(pdata) \
-	dbx500_add_spi("spi0", U5500_SPI0_BASE, IRQ_DB5500_SPI0, pdata, \
+#define db5500_add_spi0(parent, pdata) \
+	dbx500_add_spi(parent, "spi0", U5500_SPI0_BASE, \
+		       IRQ_DB5500_SPI0, pdata,		\
 		       0x10080023)
-#define db5500_add_spi1(pdata) \
-	dbx500_add_spi("spi1", U5500_SPI1_BASE, IRQ_DB5500_SPI1, pdata, \
+#define db5500_add_spi1(parent, pdata) \
+	dbx500_add_spi(parent, "spi1", U5500_SPI1_BASE, \
+		       IRQ_DB5500_SPI1, pdata,		\
 		       0x10080023)
-#define db5500_add_spi2(pdata) \
-	dbx500_add_spi("spi2", U5500_SPI2_BASE, IRQ_DB5500_SPI2, pdata \
+#define db5500_add_spi2(parent, pdata) \
+	dbx500_add_spi(parent, "spi2", U5500_SPI2_BASE, \
+		       IRQ_DB5500_SPI2, pdata		\
 		       0x10080023)
-#define db5500_add_spi3(pdata) \
-	dbx500_add_spi("spi3", U5500_SPI3_BASE, IRQ_DB5500_SPI3, pdata \
+#define db5500_add_spi3(parent, pdata) \
+	dbx500_add_spi(parent, "spi3", U5500_SPI3_BASE, \
+		       IRQ_DB5500_SPI3, pdata		\
 		       0x10080023)
 
-#define db5500_add_uart0(plat) \
-	dbx500_add_uart("uart0", U5500_UART0_BASE, IRQ_DB5500_UART0, plat)
-#define db5500_add_uart1(plat) \
-	dbx500_add_uart("uart1", U5500_UART1_BASE, IRQ_DB5500_UART1, plat)
-#define db5500_add_uart2(plat) \
-	dbx500_add_uart("uart2", U5500_UART2_BASE, IRQ_DB5500_UART2, plat)
-#define db5500_add_uart3(plat) \
-	dbx500_add_uart("uart3", U5500_UART3_BASE, IRQ_DB5500_UART3, plat)
+#define db5500_add_uart0(parent, plat) \
+	dbx500_add_uart(parent, "uart0", U5500_UART0_BASE, \
+			IRQ_DB5500_UART0, plat)
+#define db5500_add_uart1(parent, plat) \
+	dbx500_add_uart(parent, "uart1", U5500_UART1_BASE, \
+			IRQ_DB5500_UART1, plat)
+#define db5500_add_uart2(parent, plat) \
+	dbx500_add_uart(parent, "uart2", U5500_UART2_BASE, \
+			IRQ_DB5500_UART2, plat)
+#define db5500_add_uart3(parent, plat) \
+	dbx500_add_uart(parent, "uart3", U5500_UART3_BASE, \
+			IRQ_DB5500_UART3, plat)
 
 #endif
diff --git a/arch/arm/mach-ux500/devices-db8500.h b/arch/arm/mach-ux500/devices-db8500.h
index cbd4a9a..9bd08ad 100644
--- a/arch/arm/mach-ux500/devices-db8500.h
+++ b/arch/arm/mach-ux500/devices-db8500.h
@@ -14,7 +14,9 @@ struct ske_keypad_platform_data;
 struct pl022_ssp_controller;
 
 static inline struct platform_device *
-db8500_add_ske_keypad(struct ske_keypad_platform_data *pdata)
+db8500_add_ske_keypad(struct device *parent,
+		      struct ske_keypad_platform_data *pdata,
+		      size_t size)
 {
 	return dbx500_add_platform_device_4k1irq("nmk-ske-keypad", -1,
 						 U8500_SKE_BASE,
@@ -22,80 +24,100 @@ db8500_add_ske_keypad(struct ske_keypad_platform_data *pdata)
 }
 
 static inline struct amba_device *
-db8500_add_ssp(const char *name, resource_size_t base, int irq,
-	       struct pl022_ssp_controller *pdata)
+db8500_add_ssp(struct device *parent, const char *name, resource_size_t base,
+	       int irq, struct pl022_ssp_controller *pdata)
 {
-	return dbx500_add_amba_device(name, base, irq, pdata, 0);
+	return dbx500_add_amba_device(parent, name, base, irq, pdata, 0);
 }
 
 
-#define db8500_add_i2c0(pdata) \
-	dbx500_add_i2c(0, U8500_I2C0_BASE, IRQ_DB8500_I2C0, pdata)
-#define db8500_add_i2c1(pdata) \
-	dbx500_add_i2c(1, U8500_I2C1_BASE, IRQ_DB8500_I2C1, pdata)
-#define db8500_add_i2c2(pdata) \
-	dbx500_add_i2c(2, U8500_I2C2_BASE, IRQ_DB8500_I2C2, pdata)
-#define db8500_add_i2c3(pdata) \
-	dbx500_add_i2c(3, U8500_I2C3_BASE, IRQ_DB8500_I2C3, pdata)
-#define db8500_add_i2c4(pdata) \
-	dbx500_add_i2c(4, U8500_I2C4_BASE, IRQ_DB8500_I2C4, pdata)
-
-#define db8500_add_msp0_i2s(pdata) \
-	dbx500_add_msp_i2s(0, U8500_MSP0_BASE, IRQ_DB8500_MSP0, pdata)
-#define db8500_add_msp1_i2s(pdata) \
-	dbx500_add_msp_i2s(1, U8500_MSP1_BASE, IRQ_DB8500_MSP1, pdata)
-#define db8500_add_msp2_i2s(pdata) \
-	dbx500_add_msp_i2s(2, U8500_MSP2_BASE, IRQ_DB8500_MSP2, pdata)
-#define db8500_add_msp3_i2s(pdata) \
-	dbx500_add_msp_i2s(3, U8500_MSP3_BASE, IRQ_DB8500_MSP1, pdata)
-
-#define db8500_add_msp0_spi(pdata) \
-	dbx500_add_msp_spi("msp0", U8500_MSP0_BASE, IRQ_DB8500_MSP0, pdata)
-#define db8500_add_msp1_spi(pdata) \
-	dbx500_add_msp_spi("msp1", U8500_MSP1_BASE, IRQ_DB8500_MSP1, pdata)
-#define db8500_add_msp2_spi(pdata) \
-	dbx500_add_msp_spi("msp2", U8500_MSP2_BASE, IRQ_DB8500_MSP2, pdata)
-#define db8500_add_msp3_spi(pdata) \
-	dbx500_add_msp_spi("msp3", U8500_MSP3_BASE, IRQ_DB8500_MSP1, pdata)
-
-#define db8500_add_rtc() \
-	dbx500_add_rtc(U8500_RTC_BASE, IRQ_DB8500_RTC);
-
-#define db8500_add_usb(rx_cfg, tx_cfg) \
-	ux500_add_usb(U8500_USBOTG_BASE, IRQ_DB8500_USBOTG, rx_cfg, tx_cfg)
-
-#define db8500_add_sdi0(pdata, pid) \
-	dbx500_add_sdi("sdi0", U8500_SDI0_BASE, IRQ_DB8500_SDMMC0, pdata, pid)
-#define db8500_add_sdi1(pdata, pid) \
-	dbx500_add_sdi("sdi1", U8500_SDI1_BASE, IRQ_DB8500_SDMMC1, pdata, pid)
-#define db8500_add_sdi2(pdata, pid) \
-	dbx500_add_sdi("sdi2", U8500_SDI2_BASE, IRQ_DB8500_SDMMC2, pdata, pid)
-#define db8500_add_sdi3(pdata, pid) \
-	dbx500_add_sdi("sdi3", U8500_SDI3_BASE, IRQ_DB8500_SDMMC3, pdata, pid)
-#define db8500_add_sdi4(pdata, pid) \
-	dbx500_add_sdi("sdi4", U8500_SDI4_BASE, IRQ_DB8500_SDMMC4, pdata, pid)
-#define db8500_add_sdi5(pdata, pid) \
-	dbx500_add_sdi("sdi5", U8500_SDI5_BASE, IRQ_DB8500_SDMMC5, pdata, pid)
-
-#define db8500_add_ssp0(pdata) \
-	db8500_add_ssp("ssp0", U8500_SSP0_BASE, IRQ_DB8500_SSP0, pdata)
-#define db8500_add_ssp1(pdata) \
-	db8500_add_ssp("ssp1", U8500_SSP1_BASE, IRQ_DB8500_SSP1, pdata)
-
-#define db8500_add_spi0(pdata) \
-	dbx500_add_spi("spi0", U8500_SPI0_BASE, IRQ_DB8500_SPI0, pdata, 0)
-#define db8500_add_spi1(pdata) \
-	dbx500_add_spi("spi1", U8500_SPI1_BASE, IRQ_DB8500_SPI1, pdata, 0)
-#define db8500_add_spi2(pdata) \
-	dbx500_add_spi("spi2", U8500_SPI2_BASE, IRQ_DB8500_SPI2, pdata, 0)
-#define db8500_add_spi3(pdata) \
-	dbx500_add_spi("spi3", U8500_SPI3_BASE, IRQ_DB8500_SPI3, pdata, 0)
-
-#define db8500_add_uart0(pdata) \
-	dbx500_add_uart("uart0", U8500_UART0_BASE, IRQ_DB8500_UART0, pdata)
-#define db8500_add_uart1(pdata) \
-	dbx500_add_uart("uart1", U8500_UART1_BASE, IRQ_DB8500_UART1, pdata)
-#define db8500_add_uart2(pdata) \
-	dbx500_add_uart("uart2", U8500_UART2_BASE, IRQ_DB8500_UART2, pdata)
+#define db8500_add_i2c0(parent, pdata) \
+	dbx500_add_i2c(parent, 0, U8500_I2C0_BASE, IRQ_DB8500_I2C0, pdata)
+#define db8500_add_i2c1(parent, pdata) \
+	dbx500_add_i2c(parent, 1, U8500_I2C1_BASE, IRQ_DB8500_I2C1, pdata)
+#define db8500_add_i2c2(parent, pdata) \
+	dbx500_add_i2c(parent, 2, U8500_I2C2_BASE, IRQ_DB8500_I2C2, pdata)
+#define db8500_add_i2c3(parent, pdata) \
+	dbx500_add_i2c(parent, 3, U8500_I2C3_BASE, IRQ_DB8500_I2C3, pdata)
+#define db8500_add_i2c4(parent, pdata) \
+	dbx500_add_i2c(parent, 4, U8500_I2C4_BASE, IRQ_DB8500_I2C4, pdata)
+
+#define db8500_add_msp0_i2s(parent, pdata) \
+	dbx500_add_msp_i2s(parent, 0, U8500_MSP0_BASE, IRQ_DB8500_MSP0, pdata)
+#define db8500_add_msp1_i2s(parent, pdata) \
+	dbx500_add_msp_i2s(parent, 1, U8500_MSP1_BASE, IRQ_DB8500_MSP1, pdata)
+#define db8500_add_msp2_i2s(parent, pdata) \
+	dbx500_add_msp_i2s(parent, 2, U8500_MSP2_BASE, IRQ_DB8500_MSP2, pdata)
+#define db8500_add_msp3_i2s(parent, pdata) \
+	dbx500_add_msp_i2s(parent, 3, U8500_MSP3_BASE, IRQ_DB8500_MSP1, pdata)
+
+#define db8500_add_msp0_spi(parent, pdata) \
+	dbx500_add_msp_spi(parent, "msp0", U8500_MSP0_BASE, \
+			   IRQ_DB8500_MSP0, pdata)
+#define db8500_add_msp1_spi(parent, pdata) \
+	dbx500_add_msp_spi(parent, "msp1", U8500_MSP1_BASE, \
+			   IRQ_DB8500_MSP1, pdata)
+#define db8500_add_msp2_spi(parent, pdata) \
+	dbx500_add_msp_spi(parent, "msp2", U8500_MSP2_BASE, \
+			   IRQ_DB8500_MSP2, pdata)
+#define db8500_add_msp3_spi(parent, pdata) \
+	dbx500_add_msp_spi(parent, "msp3", U8500_MSP3_BASE, \
+			   IRQ_DB8500_MSP1, pdata)
+
+#define db8500_add_rtc(parent) \
+	dbx500_add_rtc(parent, U8500_RTC_BASE, IRQ_DB8500_RTC);
+
+#define db8500_add_usb(parent, rx_cfg, tx_cfg) \
+	ux500_add_usb(parent, U8500_USBOTG_BASE, \
+		      IRQ_DB8500_USBOTG, rx_cfg, tx_cfg)
+
+#define db8500_add_sdi0(parent, pdata, pid) \
+	dbx500_add_sdi(parent, "sdi0", U8500_SDI0_BASE, \
+		       IRQ_DB8500_SDMMC0, pdata, pid)
+#define db8500_add_sdi1(parent, pdata, pid) \
+	dbx500_add_sdi(parent, "sdi1", U8500_SDI1_BASE, \
+		       IRQ_DB8500_SDMMC1, pdata, pid)
+#define db8500_add_sdi2(parent, pdata, pid) \
+	dbx500_add_sdi(parent, "sdi2", U8500_SDI2_BASE, \
+		       IRQ_DB8500_SDMMC2, pdata, pid)
+#define db8500_add_sdi3(parent, pdata, pid) \
+	dbx500_add_sdi(parent, "sdi3", U8500_SDI3_BASE, \
+		       IRQ_DB8500_SDMMC3, pdata, pid)
+#define db8500_add_sdi4(parent, pdata, pid) \
+	dbx500_add_sdi(parent, "sdi4", U8500_SDI4_BASE, \
+		       IRQ_DB8500_SDMMC4, pdata, pid)
+#define db8500_add_sdi5(parent, pdata, pid) \
+	dbx500_add_sdi(parent, "sdi5", U8500_SDI5_BASE, \
+		       IRQ_DB8500_SDMMC5, pdata, pid)
+
+#define db8500_add_ssp0(parent, pdata) \
+	db8500_add_ssp(parent, "ssp0", U8500_SSP0_BASE, \
+		       IRQ_DB8500_SSP0, pdata)
+#define db8500_add_ssp1(parent, pdata) \
+	db8500_add_ssp(parent, "ssp1", U8500_SSP1_BASE, \
+		       IRQ_DB8500_SSP1, pdata)
+
+#define db8500_add_spi0(parent, pdata) \
+	dbx500_add_spi(parent, "spi0", U8500_SPI0_BASE, \
+		       IRQ_DB8500_SPI0, pdata, 0)
+#define db8500_add_spi1(parent, pdata) \
+	dbx500_add_spi(parent, "spi1", U8500_SPI1_BASE, \
+		       IRQ_DB8500_SPI1, pdata, 0)
+#define db8500_add_spi2(parent, pdata) \
+	dbx500_add_spi(parent, "spi2", U8500_SPI2_BASE, \
+		       IRQ_DB8500_SPI2, pdata, 0)
+#define db8500_add_spi3(parent, pdata) \
+	dbx500_add_spi(parent, "spi3", U8500_SPI3_BASE, \
+		       IRQ_DB8500_SPI3, pdata, 0)
+
+#define db8500_add_uart0(parent, pdata) \
+	dbx500_add_uart(parent, "uart0", U8500_UART0_BASE, \
+			IRQ_DB8500_UART0, pdata)
+#define db8500_add_uart1(parent, pdata) \
+	dbx500_add_uart(parent, "uart1", U8500_UART1_BASE, \
+			IRQ_DB8500_UART1, pdata)
+#define db8500_add_uart2(parent, pdata) \
+	dbx500_add_uart(parent, "uart2", U8500_UART2_BASE, \
+			IRQ_DB8500_UART2, pdata)
 
 #endif
diff --git a/arch/arm/mach-ux500/dma-db5500.c b/arch/arm/mach-ux500/dma-db5500.c
index 1cfab68..41e9470 100644
--- a/arch/arm/mach-ux500/dma-db5500.c
+++ b/arch/arm/mach-ux500/dma-db5500.c
@@ -125,10 +125,11 @@ static struct platform_device dma40_device = {
 	.resource	= dma40_resources
 };
 
-void __init db5500_dma_init(void)
+void __init db5500_dma_init(struct device *parent)
 {
 	int ret;
 
+	dma40_device.dev.parent = parent;
 	ret = platform_device_register(&dma40_device);
 	if (ret)
 		dev_err(&dma40_device.dev, "unable to register device: %d\n", ret);
diff --git a/arch/arm/mach-ux500/include/mach/setup.h b/arch/arm/mach-ux500/include/mach/setup.h
index a7d363f..e46b8b1 100644
--- a/arch/arm/mach-ux500/include/mach/setup.h
+++ b/arch/arm/mach-ux500/include/mach/setup.h
@@ -18,14 +18,14 @@ void __init ux500_map_io(void);
 extern void __init u5500_map_io(void);
 extern void __init u8500_map_io(void);
 
-extern void __init u5500_init_devices(void);
-extern void __init u8500_init_devices(void);
+extern struct device * __init u5500_init_devices(void);
+extern struct device * __init u8500_init_devices(void);
 
 extern void __init ux500_init_irq(void);
 
-extern void __init u5500_sdi_init(void);
+extern void __init u5500_sdi_init(struct device *parent);
 
-extern void __init db5500_dma_init(void);
+extern void __init db5500_dma_init(struct device *parent);
 
 /* We re-use nomadik_timer for this platform */
 extern void nmdk_timer_init(void);
diff --git a/arch/arm/mach-ux500/include/mach/usb.h b/arch/arm/mach-ux500/include/mach/usb.h
index d3739d4..4c1cc50 100644
--- a/arch/arm/mach-ux500/include/mach/usb.h
+++ b/arch/arm/mach-ux500/include/mach/usb.h
@@ -20,6 +20,6 @@ struct ux500_musb_board_data {
 	bool (*dma_filter)(struct dma_chan *chan, void *filter_param);
 };
 
-void ux500_add_usb(resource_size_t base, int irq, int *dma_rx_cfg,
-	int *dma_tx_cfg);
+void ux500_add_usb(struct device *parent, resource_size_t base,
+		   int irq, int *dma_rx_cfg, int *dma_tx_cfg);
 #endif
diff --git a/arch/arm/mach-ux500/usb.c b/arch/arm/mach-ux500/usb.c
index 0a01cbd..bef6a31 100644
--- a/arch/arm/mach-ux500/usb.c
+++ b/arch/arm/mach-ux500/usb.c
@@ -146,8 +146,8 @@ static inline void ux500_usb_dma_update_tx_ch_config(int *dst_dev_type)
 		musb_dma_tx_ch[idx].dst_dev_type = dst_dev_type[idx];
 }
 
-void ux500_add_usb(resource_size_t base, int irq, int *dma_rx_cfg,
-	int *dma_tx_cfg)
+void ux500_add_usb(struct device *parent, resource_size_t base, int irq,
+		   int *dma_rx_cfg, int *dma_tx_cfg)
 {
 	ux500_musb_device.resource[0].start = base;
 	ux500_musb_device.resource[0].end = base + SZ_64K - 1;
-- 
1.7.5.4

[PATCH 0/6] ux500: Export SoC information and some platform clean-up

[Lee Jones]

This patch-set satisfies 4 objectives:
 1. Ensures each platform device can specify a suitable parent
 2. Provides a bus for SoC devices as a means to export information
 3. Allows ux500 to make use of the new SoC bus
 4. Cleans up unnecessary complexity from ux500 code

 Documentation/ABI/testing/sysfs-devices-soc    |   58 ++++++++
 arch/arm/mach-ux500/Kconfig                    |    1 +
 arch/arm/mach-ux500/board-mop500-sdi.c         |   31 ++--
 arch/arm/mach-ux500/board-mop500.c             |   74 +++++++----
 arch/arm/mach-ux500/board-mop500.h             |    8 +-
 arch/arm/mach-ux500/board-u5500-sdi.c          |    4 +-
 arch/arm/mach-ux500/board-u5500.c              |   27 +++--
 arch/arm/mach-ux500/cpu-db5500.c               |   36 ++++-
 arch/arm/mach-ux500/cpu-db8500.c               |   44 +++++-
 arch/arm/mach-ux500/cpu.c                      |   70 ++++++++++
 arch/arm/mach-ux500/devices-common.c           |   79 +++---------
 arch/arm/mach-ux500/devices-common.h           |   83 ++++++-----
 arch/arm/mach-ux500/devices-db5500.h           |  116 +++++++++-------
 arch/arm/mach-ux500/devices-db8500.h           |  176 ++++++++++++++----------
 arch/arm/mach-ux500/dma-db5500.c               |    3 +-
 arch/arm/mach-ux500/include/mach/db8500-regs.h |    3 +
 arch/arm/mach-ux500/include/mach/setup.h       |   10 +-
 arch/arm/mach-ux500/include/mach/usb.h         |    4 +-
 arch/arm/mach-ux500/usb.c                      |    7 +-
 drivers/base/Kconfig                           |    3 +
 drivers/base/Makefile                          |    1 +
 drivers/base/soc.c                             |  175 +++++++++++++++++++++++
 include/linux/sys_soc.h                        |   37 +++++
 23 files changed, 746 insertions(+), 304 deletions(-)

[PATCH 1/6] mach-ux500: pass parent pointer to each platform device

[Lee Jones]

This patch provides a means for any device within ux500
platform code to allocate its own parent. This is particularly
prudent with the introduction of /sys/devices/socX, as a
device can now proclaim to be integral part of an SoC, rather
than a more generic platform device. Latter patches make good
use of this functionality.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 arch/arm/mach-ux500/board-mop500-sdi.c   |   31 +++---
 arch/arm/mach-ux500/board-mop500.c       |   62 ++++++-----
 arch/arm/mach-ux500/board-mop500.h       |    8 +-
 arch/arm/mach-ux500/board-u5500-sdi.c    |    4 +-
 arch/arm/mach-ux500/board-u5500.c        |   23 +++--
 arch/arm/mach-ux500/cpu-db5500.c         |   18 ++--
 arch/arm/mach-ux500/cpu-db8500.c         |   15 ++--
 arch/arm/mach-ux500/devices-common.c     |   13 ++-
 arch/arm/mach-ux500/devices-common.h     |   39 ++++---
 arch/arm/mach-ux500/devices-db5500.h     |  116 ++++++++++++---------
 arch/arm/mach-ux500/devices-db8500.h     |  166 +++++++++++++++++-------------
 arch/arm/mach-ux500/dma-db5500.c         |    3 +-
 arch/arm/mach-ux500/include/mach/setup.h |    8 +-
 arch/arm/mach-ux500/include/mach/usb.h   |    4 +-
 arch/arm/mach-ux500/usb.c                |    4 +-
 15 files changed, 289 insertions(+), 225 deletions(-)

diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c
index 23be34b..163c083 100644
--- a/arch/arm/mach-ux500/board-mop500-sdi.c
+++ b/arch/arm/mach-ux500/board-mop500-sdi.c
@@ -104,7 +104,7 @@ static struct mmci_platform_data mop500_sdi0_data = {
 #endif
 };
 
-static void sdi0_configure(void)
+static void sdi0_configure(struct device *parent)
 {
 	int ret;
 
@@ -123,15 +123,15 @@ static void sdi0_configure(void)
 	gpio_direction_output(sdi0_en, 1);
 
 	/* Add the device, force v2 to subrevision 1 */
-	db8500_add_sdi0(&mop500_sdi0_data, U8500_SDI_V2_PERIPHID);
+	db8500_add_sdi0(parent, &mop500_sdi0_data, U8500_SDI_V2_PERIPHID);
 }
 
-void mop500_sdi_tc35892_init(void)
+void mop500_sdi_tc35892_init(struct device *parent)
 {
 	mop500_sdi0_data.gpio_cd = GPIO_SDMMC_CD;
 	sdi0_en = GPIO_SDMMC_EN;
 	sdi0_vsel = GPIO_SDMMC_1V8_3V_SEL;
-	sdi0_configure();
+	sdi0_configure(parent);
 }
 
 /*
@@ -246,12 +246,13 @@ static struct mmci_platform_data mop500_sdi4_data = {
 #endif
 };
 
-void __init mop500_sdi_init(void)
+void __init mop500_sdi_init(struct device *parent)
 {
 	/* PoP:ed eMMC */
-	db8500_add_sdi2(&mop500_sdi2_data, U8500_SDI_V2_PERIPHID);
+	db8500_add_sdi2(parent, &mop500_sdi2_data, U8500_SDI_V2_PERIPHID);
 	/* On-board eMMC */
-	db8500_add_sdi4(&mop500_sdi4_data, U8500_SDI_V2_PERIPHID);
+	db8500_add_sdi4(parent, &mop500_sdi4_data, U8500_SDI_V2_PERIPHID);
+
 	/*
 	 * On boards with the TC35892 GPIO expander, sdi0 will finally
 	 * be added when the TC35892 initializes and calls
@@ -259,29 +260,29 @@ void __init mop500_sdi_init(void)
 	 */
 }
 
-void __init snowball_sdi_init(void)
+void __init snowball_sdi_init(struct device *parent)
 {
 	/* On-board eMMC */
-	db8500_add_sdi4(&mop500_sdi4_data, U8500_SDI_V2_PERIPHID);
+	db8500_add_sdi4(parent, &mop500_sdi4_data, U8500_SDI_V2_PERIPHID);
 	/* External Micro SD slot */
 	mop500_sdi0_data.gpio_cd = SNOWBALL_SDMMC_CD_GPIO;
 	mop500_sdi0_data.cd_invert = true;
 	sdi0_en = SNOWBALL_SDMMC_EN_GPIO;
 	sdi0_vsel = SNOWBALL_SDMMC_1V8_3V_GPIO;
-	sdi0_configure();
+	sdi0_configure(parent);
 }
 
-void __init hrefv60_sdi_init(void)
+void __init hrefv60_sdi_init(struct device *parent)
 {
 	/* PoP:ed eMMC */
-	db8500_add_sdi2(&mop500_sdi2_data, U8500_SDI_V2_PERIPHID);
+	db8500_add_sdi2(parent, &mop500_sdi2_data, U8500_SDI_V2_PERIPHID);
 	/* On-board eMMC */
-	db8500_add_sdi4(&mop500_sdi4_data, U8500_SDI_V2_PERIPHID);
+	db8500_add_sdi4(parent, &mop500_sdi4_data, U8500_SDI_V2_PERIPHID);
 	/* External Micro SD slot */
 	mop500_sdi0_data.gpio_cd = HREFV60_SDMMC_CD_GPIO;
 	sdi0_en = HREFV60_SDMMC_EN_GPIO;
 	sdi0_vsel = HREFV60_SDMMC_1V8_3V_GPIO;
-	sdi0_configure();
+	sdi0_configure(parent);
 	/* WLAN SDIO channel */
-	db8500_add_sdi1(&mop500_sdi1_data, U8500_SDI_V2_PERIPHID);
+	db8500_add_sdi1(parent, &mop500_sdi1_data, U8500_SDI_V2_PERIPHID);
 }
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index 5c00712..f9ce2a1 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -226,7 +226,12 @@ static struct tps6105x_platform_data mop500_tps61052_data = {
 
 static void mop500_tc35892_init(struct tc3589x *tc3589x, unsigned int base)
 {
-	mop500_sdi_tc35892_init();
+	struct device *parent = NULL;
+#if 0
+	/* FIXME: Is the sdi actually part of tc3589x? */
+	parent = tc3589x->dev;
+#endif
+	mop500_sdi_tc35892_init(parent);
 }
 
 static struct tc3589x_gpio_platform_data mop500_tc35892_gpio_data = {
@@ -353,12 +358,12 @@ U8500_I2C_CONTROLLER(1, 0xe, 1, 8, 100000, 200, I2C_FREQ_MODE_FAST);
 U8500_I2C_CONTROLLER(2,	0xe, 1, 8, 100000, 200, I2C_FREQ_MODE_FAST);
 U8500_I2C_CONTROLLER(3,	0xe, 1, 8, 100000, 200, I2C_FREQ_MODE_FAST);
 
-static void __init mop500_i2c_init(void)
+static void __init mop500_i2c_init(struct device *parent)
 {
-	db8500_add_i2c0(&u8500_i2c0_data);
-	db8500_add_i2c1(&u8500_i2c1_data);
-	db8500_add_i2c2(&u8500_i2c2_data);
-	db8500_add_i2c3(&u8500_i2c3_data);
+	db8500_add_i2c0(parent, &u8500_i2c0_data);
+	db8500_add_i2c1(parent, &u8500_i2c1_data);
+	db8500_add_i2c2(parent, &u8500_i2c2_data);
+	db8500_add_i2c3(parent, &u8500_i2c3_data);
 }
 
 static struct gpio_keys_button mop500_gpio_keys[] = {
@@ -451,9 +456,9 @@ static struct pl022_ssp_controller ssp0_platform_data = {
 	.num_chipselect = 5,
 };
 
-static void __init mop500_spi_init(void)
+static void __init mop500_spi_init(struct device *parent)
 {
-	db8500_add_ssp0(&ssp0_platform_data);
+	db8500_add_ssp0(parent, &ssp0_platform_data);
 }
 
 #ifdef CONFIG_STE_DMA40
@@ -587,11 +592,11 @@ static struct amba_pl011_data uart2_plat = {
 #endif
 };
 
-static void __init mop500_uart_init(void)
+static void __init mop500_uart_init(struct device *parent)
 {
-	db8500_add_uart0(&uart0_plat);
-	db8500_add_uart1(&uart1_plat);
-	db8500_add_uart2(&uart2_plat);
+	db8500_add_uart0(parent, &uart0_plat);
+	db8500_add_uart1(parent, &uart1_plat);
+	db8500_add_uart2(parent, &uart2_plat);
 }
 
 static struct platform_device *snowball_platform_devs[] __initdata = {
@@ -603,21 +608,22 @@ static struct platform_device *snowball_platform_devs[] __initdata = {
 
 static void __init mop500_init_machine(void)
 {
+	struct device *parent = NULL;
 	int i2c0_devs;
 
 	mop500_gpio_keys[0].gpio = GPIO_PROX_SENSOR;
 
-	u8500_init_devices();
+	parent = u8500_init_devices();
 
 	mop500_pins_init();
 
 	platform_add_devices(mop500_platform_devs,
 			ARRAY_SIZE(mop500_platform_devs));
 
-	mop500_i2c_init();
-	mop500_sdi_init();
-	mop500_spi_init();
-	mop500_uart_init();
+	mop500_i2c_init(parent);
+	mop500_sdi_init(parent);
+	mop500_spi_init(parent);
+	mop500_uart_init(parent);
 
 	i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
 
@@ -631,19 +637,20 @@ static void __init mop500_init_machine(void)
 
 static void __init snowball_init_machine(void)
 {
+	struct device *parent = NULL;
 	int i2c0_devs;
 
-	u8500_init_devices();
+	parent = u8500_init_devices();
 
 	snowball_pins_init();
 
 	platform_add_devices(snowball_platform_devs,
 			ARRAY_SIZE(snowball_platform_devs));
 
-	mop500_i2c_init();
-	snowball_sdi_init();
-	mop500_spi_init();
-	mop500_uart_init();
+	mop500_i2c_init(parent);
+	snowball_sdi_init(parent);
+	mop500_spi_init(parent);
+	mop500_uart_init(parent);
 
 	i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
 	i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs);
@@ -656,6 +663,7 @@ static void __init snowball_init_machine(void)
 
 static void __init hrefv60_init_machine(void)
 {
+	struct device *parent = NULL;
 	int i2c0_devs;
 
 	/*
@@ -665,17 +673,17 @@ static void __init hrefv60_init_machine(void)
 	 */
 	mop500_gpio_keys[0].gpio = HREFV60_PROX_SENSE_GPIO;
 
-	u8500_init_devices();
+	parent = u8500_init_devices();
 
 	hrefv60_pins_init();
 
 	platform_add_devices(mop500_platform_devs,
 			ARRAY_SIZE(mop500_platform_devs));
 
-	mop500_i2c_init();
-	hrefv60_sdi_init();
-	mop500_spi_init();
-	mop500_uart_init();
+	mop500_i2c_init(parent);
+	hrefv60_sdi_init(parent);
+	mop500_spi_init(parent);
+	mop500_uart_init(parent);
 
 	i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
 
diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h
index f926d3d..3d594c2 100644
--- a/arch/arm/mach-ux500/board-mop500.h
+++ b/arch/arm/mach-ux500/board-mop500.h
@@ -75,10 +75,10 @@
 
 struct i2c_board_info;
 
-extern void mop500_sdi_init(void);
-extern void snowball_sdi_init(void);
-extern void hrefv60_sdi_init(void);
-extern void mop500_sdi_tc35892_init(void);
+extern void mop500_sdi_init(struct device *parent);
+extern void snowball_sdi_init(struct device *parent);
+extern void hrefv60_sdi_init(struct device *parent);
+extern void mop500_sdi_tc35892_init(struct device *parent);
 void __init mop500_u8500uib_init(void);
 void __init mop500_stuib_init(void);
 void __init mop500_pins_init(void);
diff --git a/arch/arm/mach-ux500/board-u5500-sdi.c b/arch/arm/mach-ux500/board-u5500-sdi.c
index 63c3f80..836112e 100644
--- a/arch/arm/mach-ux500/board-u5500-sdi.c
+++ b/arch/arm/mach-ux500/board-u5500-sdi.c
@@ -66,9 +66,9 @@ static struct mmci_platform_data u5500_sdi0_data = {
 #endif
 };
 
-void __init u5500_sdi_init(void)
+void __init u5500_sdi_init(struct device *parent)
 {
 	nmk_config_pins(u5500_sdi_pins, ARRAY_SIZE(u5500_sdi_pins));
 
-	db5500_add_sdi0(&u5500_sdi0_data);
+	db5500_add_sdi0(parent, &u5500_sdi0_data);
 }
diff --git a/arch/arm/mach-ux500/board-u5500.c b/arch/arm/mach-ux500/board-u5500.c
index 9de9e9c..d7a9596 100644
--- a/arch/arm/mach-ux500/board-u5500.c
+++ b/arch/arm/mach-ux500/board-u5500.c
@@ -97,9 +97,9 @@ static struct i2c_board_info __initdata u5500_i2c2_devices[] = {
 	},
 };
 
-static void __init u5500_i2c_init(void)
+static void __init u5500_i2c_init(struct device *parent)
 {
-	db5500_add_i2c2(&u5500_i2c2_data);
+	db5500_add_i2c2(parent, &u5500_i2c2_data);
 	i2c_register_board_info(2, ARRAY_AND_SIZE(u5500_i2c2_devices));
 }
 
@@ -126,20 +126,23 @@ static struct platform_device *u5500_platform_devices[] __initdata = {
 	&ab5500_device,
 };
 
-static void __init u5500_uart_init(void)
+static void __init u5500_uart_init(struct device *parent)
 {
-	db5500_add_uart0(NULL);
-	db5500_add_uart1(NULL);
-	db5500_add_uart2(NULL);
+	db5500_add_uart0(parent, NULL);
+	db5500_add_uart1(parent, NULL);
+	db5500_add_uart2(parent, NULL);
 }
 
 static void __init u5500_init_machine(void)
 {
-	u5500_init_devices();
+	struct device *parent = NULL;
+
+	parent = u5500_init_devices();
 	nmk_config_pins(u5500_pins, ARRAY_SIZE(u5500_pins));
-	u5500_i2c_init();
-	u5500_sdi_init();
-	u5500_uart_init();
+
+	u5500_i2c_init(parent);
+	u5500_sdi_init(parent);
+	u5500_uart_init(parent);
 
 	platform_add_devices(u5500_platform_devices,
 		ARRAY_SIZE(u5500_platform_devices));
diff --git a/arch/arm/mach-ux500/cpu-db5500.c b/arch/arm/mach-ux500/cpu-db5500.c
index 18aa5c0..c402fd6 100644
--- a/arch/arm/mach-ux500/cpu-db5500.c
+++ b/arch/arm/mach-ux500/cpu-db5500.c
@@ -147,13 +147,13 @@ static resource_size_t __initdata db5500_gpio_base[] = {
 	U5500_GPIOBANK7_BASE,
 };
 
-static void __init db5500_add_gpios(void)
+static void __init db5500_add_gpios(struct device *parent)
 {
 	struct nmk_gpio_platform_data pdata = {
 		/* No custom data yet */
 	};
 
-	dbx500_add_gpios(ARRAY_AND_SIZE(db5500_gpio_base),
+	dbx500_add_gpios(parent, ARRAY_AND_SIZE(db5500_gpio_base),
 			 IRQ_DB5500_GPIO0, &pdata);
 }
 
@@ -212,14 +212,18 @@ static int usb_db5500_tx_dma_cfg[] = {
 	DB5500_DMA_DEV38_USB_OTG_OEP_8
 };
 
-void __init u5500_init_devices(void)
+struct device* __init u5500_init_devices(void)
 {
-	db5500_add_gpios();
+	/* FIXME: First parameter to be a real parent. */
+	db5500_add_gpios(NULL);
 	db5500_pmu_init();
-	db5500_dma_init();
-	db5500_add_rtc();
-	db5500_add_usb(usb_db5500_rx_dma_cfg, usb_db5500_tx_dma_cfg);
+	db5500_dma_init(NULL);
+	db5500_add_rtc(NULL);
+	db5500_add_usb(NULL, usb_db5500_rx_dma_cfg, usb_db5500_tx_dma_cfg);
 
 	platform_add_devices(db5500_platform_devs,
 			     ARRAY_SIZE(db5500_platform_devs));
+
+	/* FIXME: Return value to be a real parent. */
+	return NULL;
 }
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index 7176ee7..1e8a2cb 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -132,13 +132,13 @@ static resource_size_t __initdata db8500_gpio_base[] = {
 	U8500_GPIOBANK8_BASE,
 };
 
-static void __init db8500_add_gpios(void)
+static void __init db8500_add_gpios(struct device *parent)
 {
 	struct nmk_gpio_platform_data pdata = {
 		.supports_sleepmode = true,
 	};
 
-	dbx500_add_gpios(ARRAY_AND_SIZE(db8500_gpio_base),
+	dbx500_add_gpios(parent, ARRAY_AND_SIZE(db8500_gpio_base),
 			 IRQ_DB8500_GPIO0, &pdata);
 }
 
@@ -167,14 +167,15 @@ static int usb_db8500_tx_dma_cfg[] = {
 /*
  * This function is called from the board init
  */
-void __init u8500_init_devices(void)
+struct device* __init u8500_init_devices(void)
 {
-	db8500_add_rtc();
-	db8500_add_gpios();
-	db8500_add_usb(usb_db8500_rx_dma_cfg, usb_db8500_tx_dma_cfg);
+	db8500_add_rtc(NULL);
+	db8500_add_gpios(NULL);
+	db8500_add_usb(NULL, usb_db8500_rx_dma_cfg, usb_db8500_tx_dma_cfg);
 
 	platform_device_register_simple("cpufreq-u8500", -1, NULL, 0);
 	platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs));
 
-	return ;
+	/* FIXME: Return value to be a real parent. */
+	return NULL;
 }
diff --git a/arch/arm/mach-ux500/devices-common.c b/arch/arm/mach-ux500/devices-common.c
index c563e54..96be248 100644
--- a/arch/arm/mach-ux500/devices-common.c
+++ b/arch/arm/mach-ux500/devices-common.c
@@ -20,8 +20,9 @@
 #include "devices-common.h"
 
 struct amba_device *
-dbx500_add_amba_device(const char *name, resource_size_t base,
-		       int irq, void *pdata, unsigned int periphid)
+dbx500_add_amba_device(struct device *parent, const char *name,
+		       resource_size_t base, int irq, void *pdata,
+		       unsigned int periphid)
 {
 	struct amba_device *dev;
 	int ret;
@@ -109,7 +110,7 @@ dbx500_add_platform_device_4k1irq(const char *name, int id,
 }
 
 static struct platform_device *
-dbx500_add_gpio(int id, resource_size_t addr, int irq,
+dbx500_add_gpio(struct device *parent, int id, resource_size_t addr, int irq,
 		struct nmk_gpio_platform_data *pdata)
 {
 	struct resource resources[] = {
@@ -130,8 +131,8 @@ dbx500_add_gpio(int id, resource_size_t addr, int irq,
 				pdata, sizeof(*pdata));
 }
 
-void dbx500_add_gpios(resource_size_t *base, int num, int irq,
-		      struct nmk_gpio_platform_data *pdata)
+void dbx500_add_gpios(struct device *parent, resource_size_t *base, int num,
+		      int irq, struct nmk_gpio_platform_data *pdata)
 {
 	int first = 0;
 	int i;
@@ -141,6 +142,6 @@ void dbx500_add_gpios(resource_size_t *base, int num, int irq,
 		pdata->first_irq = NOMADIK_GPIO_TO_IRQ(first);
 		pdata->num_gpio = 32;
 
-		dbx500_add_gpio(i, base[i], irq, pdata);
+		dbx500_add_gpio(parent, i, base[i], irq, pdata);
 	}
 }
diff --git a/arch/arm/mach-ux500/devices-common.h b/arch/arm/mach-ux500/devices-common.h
index 7825705..f8adff8 100644
--- a/arch/arm/mach-ux500/devices-common.h
+++ b/arch/arm/mach-ux500/devices-common.h
@@ -9,7 +9,7 @@
 #define __DEVICES_COMMON_H
 
 extern struct amba_device *
-dbx500_add_amba_device(const char *name, resource_size_t base,
+dbx500_add_amba_device(struct device *parent, const char *name, resource_size_t base,
 		       int irq, void *pdata, unsigned int periphid);
 
 extern struct platform_device *
@@ -20,43 +20,46 @@ dbx500_add_platform_device_4k1irq(const char *name, int id,
 struct spi_master_cntlr;
 
 static inline struct amba_device *
-dbx500_add_msp_spi(const char *name, resource_size_t base, int irq,
+dbx500_add_msp_spi(struct device *parent, const char *name,
+		   resource_size_t base, int irq,
 		   struct spi_master_cntlr *pdata)
 {
-	return dbx500_add_amba_device(name, base, irq, pdata, 0);
+	return dbx500_add_amba_device(parent, name, base, irq,
+				      pdata, 0);
 }
 
 static inline struct amba_device *
-dbx500_add_spi(const char *name, resource_size_t base, int irq,
-	       struct spi_master_cntlr *pdata,
+dbx500_add_spi(struct device *parent, const char *name, resource_size_t base,
+	       int irq, struct spi_master_cntlr *pdata,
 	       u32 periphid)
 {
-	return dbx500_add_amba_device(name, base, irq, pdata, periphid);
+	return dbx500_add_amba_device(parent, name, base, irq,
+				      pdata, periphid);
 }
 
 struct mmci_platform_data;
 
 static inline struct amba_device *
-dbx500_add_sdi(const char *name, resource_size_t base, int irq,
-	       struct mmci_platform_data *pdata,
-	       u32 periphid)
+dbx500_add_sdi(struct device *parent, const char *name, resource_size_t base,
+	       int irq, struct mmci_platform_data *pdata, u32 periphid)
 {
-	return dbx500_add_amba_device(name, base, irq, pdata, periphid);
+	return dbx500_add_amba_device(parent, name, base, irq,
+				      pdata, periphid);
 }
 
 struct amba_pl011_data;
 
 static inline struct amba_device *
-dbx500_add_uart(const char *name, resource_size_t base, int irq,
-		struct amba_pl011_data *pdata)
+dbx500_add_uart(struct device *parent, const char *name, resource_size_t base,
+		int irq, struct amba_pl011_data *pdata)
 {
-	return dbx500_add_amba_device(name, base, irq, pdata, 0);
+	return dbx500_add_amba_device(parent, name, base, irq, pdata, 0);
 }
 
 struct nmk_i2c_controller;
 
 static inline struct platform_device *
-dbx500_add_i2c(int id, resource_size_t base, int irq,
+dbx500_add_i2c(struct device *parent, int id, resource_size_t base, int irq,
 	       struct nmk_i2c_controller *pdata)
 {
 	return dbx500_add_platform_device_4k1irq("nmk-i2c", id, base, irq,
@@ -74,14 +77,14 @@ dbx500_add_msp_i2s(int id, resource_size_t base, int irq,
 }
 
 static inline struct amba_device *
-dbx500_add_rtc(resource_size_t base, int irq)
+dbx500_add_rtc(struct device *parent, resource_size_t base, int irq)
 {
-	return dbx500_add_amba_device("rtc-pl031", base, irq, NULL, 0);
+	return dbx500_add_amba_device(parent, "rtc-pl031", base, irq, NULL, 0);
 }
 
 struct nmk_gpio_platform_data;
 
-void dbx500_add_gpios(resource_size_t *base, int num, int irq,
-		      struct nmk_gpio_platform_data *pdata);
+void dbx500_add_gpios(struct device *parent, resource_size_t *base, int num,
+		      int irq, struct nmk_gpio_platform_data *pdata);
 
 #endif
diff --git a/arch/arm/mach-ux500/devices-db5500.h b/arch/arm/mach-ux500/devices-db5500.h
index 0c4bccd..e709555 100644
--- a/arch/arm/mach-ux500/devices-db5500.h
+++ b/arch/arm/mach-ux500/devices-db5500.h
@@ -10,70 +10,90 @@
 
 #include "devices-common.h"
 
-#define db5500_add_i2c1(pdata) \
-	dbx500_add_i2c(1, U5500_I2C1_BASE, IRQ_DB5500_I2C1, pdata)
-#define db5500_add_i2c2(pdata) \
-	dbx500_add_i2c(2, U5500_I2C2_BASE, IRQ_DB5500_I2C2, pdata)
-#define db5500_add_i2c3(pdata) \
-	dbx500_add_i2c(3, U5500_I2C3_BASE, IRQ_DB5500_I2C3, pdata)
+#define db5500_add_i2c1(parent, pdata) \
+	dbx500_add_i2c(parent, 1, U5500_I2C1_BASE, IRQ_DB5500_I2C1, pdata)
+#define db5500_add_i2c2(parent, pdata) \
+	dbx500_add_i2c(parent, 2, U5500_I2C2_BASE, IRQ_DB5500_I2C2, pdata)
+#define db5500_add_i2c3(parent, pdata) \
+	dbx500_add_i2c(parent, 3, U5500_I2C3_BASE, IRQ_DB5500_I2C3, pdata)
 
-#define db5500_add_msp0_i2s(pdata) \
-	dbx500_add_msp_i2s(0, U5500_MSP0_BASE, IRQ_DB5500_MSP0, pdata)
-#define db5500_add_msp1_i2s(pdata) \
-	dbx500_add_msp_i2s(1, U5500_MSP1_BASE, IRQ_DB5500_MSP1, pdata)
-#define db5500_add_msp2_i2s(pdata) \
-	dbx500_add_msp_i2s(2, U5500_MSP2_BASE, IRQ_DB5500_MSP2, pdata)
+#define db5500_add_msp0_spi(parent, pdata) \
+	dbx500_add_msp_spi(parent, "msp0", U5500_MSP0_BASE, \
+			   IRQ_DB5500_MSP0, pdata)
+#define db5500_add_msp1_spi(parent, pdata) \
+	dbx500_add_msp_spi(parent, "msp1", U5500_MSP1_BASE, \
+			   IRQ_DB5500_MSP1, pdata)
+#define db5500_add_msp2_spi(parent, pdata) \
+	dbx500_add_msp_spi(parent, "msp2", U5500_MSP2_BASE, \
+			   IRQ_DB5500_MSP2, pdata)
 
-#define db5500_add_msp0_spi(pdata) \
-	dbx500_add_msp_spi("msp0", U5500_MSP0_BASE, IRQ_DB5500_MSP0, pdata)
-#define db5500_add_msp1_spi(pdata) \
-	dbx500_add_msp_spi("msp1", U5500_MSP1_BASE, IRQ_DB5500_MSP1, pdata)
-#define db5500_add_msp2_spi(pdata) \
-	dbx500_add_msp_spi("msp2", U5500_MSP2_BASE, IRQ_DB5500_MSP2, pdata)
+#define db5500_add_msp0_spi(parent, pdata) \
+	dbx500_add_msp_spi(parent, "msp0", U5500_MSP0_BASE, \
+			  IRQ_DB5500_MSP0, pdata)
+#define db5500_add_msp1_spi(parent, pdata) \
+	dbx500_add_msp_spi(parent, "msp1", U5500_MSP1_BASE, \
+			  IRQ_DB5500_MSP1, pdata)
+#define db5500_add_msp2_spi(parent, pdata) \
+	dbx500_add_msp_spi(parent, "msp2", U5500_MSP2_BASE, \
+			  IRQ_DB5500_MSP2, pdata)
 
-#define db5500_add_rtc() \
-	dbx500_add_rtc(U5500_RTC_BASE, IRQ_DB5500_RTC);
+#define db5500_add_rtc(parent) \
+	dbx500_add_rtc(parent, U5500_RTC_BASE, IRQ_DB5500_RTC);
 
-#define db5500_add_usb(rx_cfg, tx_cfg) \
-	ux500_add_usb(U5500_USBOTG_BASE, IRQ_DB5500_USBOTG, rx_cfg, tx_cfg)
+#define db5500_add_usb(parent, rx_cfg, tx_cfg) \
+	ux500_add_usb(parent, U5500_USBOTG_BASE, \
+		      IRQ_DB5500_USBOTG, rx_cfg, tx_cfg)
 
-#define db5500_add_sdi0(pdata) \
-	dbx500_add_sdi("sdi0", U5500_SDI0_BASE, IRQ_DB5500_SDMMC0, pdata, \
+#define db5500_add_sdi0(parent, pdata) \
+	dbx500_add_sdi(parent, "sdi0", U5500_SDI0_BASE, \
+		       IRQ_DB5500_SDMMC0, pdata,	\
 		       0x10480180)
-#define db5500_add_sdi1(pdata) \
-	dbx500_add_sdi("sdi1", U5500_SDI1_BASE, IRQ_DB5500_SDMMC1, pdata, \
+#define db5500_add_sdi1(parent, pdata) \
+	dbx500_add_sdi(parent, "sdi1", U5500_SDI1_BASE, \
+		       IRQ_DB5500_SDMMC1, pdata,	\
 		       0x10480180)
-#define db5500_add_sdi2(pdata) \
-	dbx500_add_sdi("sdi2", U5500_SDI2_BASE, IRQ_DB5500_SDMMC2, pdata \
+#define db5500_add_sdi2(parent, pdata) \
+	dbx500_add_sdi(parent, "sdi2", U5500_SDI2_BASE, \
+		       IRQ_DB5500_SDMMC2, pdata		\
 		       0x10480180)
-#define db5500_add_sdi3(pdata) \
-	dbx500_add_sdi("sdi3", U5500_SDI3_BASE, IRQ_DB5500_SDMMC3, pdata \
+#define db5500_add_sdi3(parent, pdata) \
+	dbx500_add_sdi(parent, "sdi3", U5500_SDI3_BASE, \
+		       IRQ_DB5500_SDMMC3, pdata		\
 		       0x10480180)
-#define db5500_add_sdi4(pdata) \
-	dbx500_add_sdi("sdi4", U5500_SDI4_BASE, IRQ_DB5500_SDMMC4, pdata \
+#define db5500_add_sdi4(parent, pdata) \
+	dbx500_add_sdi(parent, "sdi4", U5500_SDI4_BASE, \
+		       IRQ_DB5500_SDMMC4, pdata		\
 		       0x10480180)
 
 /* This one has a bad peripheral ID in the U5500 silicon */
-#define db5500_add_spi0(pdata) \
-	dbx500_add_spi("spi0", U5500_SPI0_BASE, IRQ_DB5500_SPI0, pdata, \
+#define db5500_add_spi0(parent, pdata) \
+	dbx500_add_spi(parent, "spi0", U5500_SPI0_BASE, \
+		       IRQ_DB5500_SPI0, pdata,		\
 		       0x10080023)
-#define db5500_add_spi1(pdata) \
-	dbx500_add_spi("spi1", U5500_SPI1_BASE, IRQ_DB5500_SPI1, pdata, \
+#define db5500_add_spi1(parent, pdata) \
+	dbx500_add_spi(parent, "spi1", U5500_SPI1_BASE, \
+		       IRQ_DB5500_SPI1, pdata,		\
 		       0x10080023)
-#define db5500_add_spi2(pdata) \
-	dbx500_add_spi("spi2", U5500_SPI2_BASE, IRQ_DB5500_SPI2, pdata \
+#define db5500_add_spi2(parent, pdata) \
+	dbx500_add_spi(parent, "spi2", U5500_SPI2_BASE, \
+		       IRQ_DB5500_SPI2, pdata		\
 		       0x10080023)
-#define db5500_add_spi3(pdata) \
-	dbx500_add_spi("spi3", U5500_SPI3_BASE, IRQ_DB5500_SPI3, pdata \
+#define db5500_add_spi3(parent, pdata) \
+	dbx500_add_spi(parent, "spi3", U5500_SPI3_BASE, \
+		       IRQ_DB5500_SPI3, pdata		\
 		       0x10080023)
 
-#define db5500_add_uart0(plat) \
-	dbx500_add_uart("uart0", U5500_UART0_BASE, IRQ_DB5500_UART0, plat)
-#define db5500_add_uart1(plat) \
-	dbx500_add_uart("uart1", U5500_UART1_BASE, IRQ_DB5500_UART1, plat)
-#define db5500_add_uart2(plat) \
-	dbx500_add_uart("uart2", U5500_UART2_BASE, IRQ_DB5500_UART2, plat)
-#define db5500_add_uart3(plat) \
-	dbx500_add_uart("uart3", U5500_UART3_BASE, IRQ_DB5500_UART3, plat)
+#define db5500_add_uart0(parent, plat) \
+	dbx500_add_uart(parent, "uart0", U5500_UART0_BASE, \
+			IRQ_DB5500_UART0, plat)
+#define db5500_add_uart1(parent, plat) \
+	dbx500_add_uart(parent, "uart1", U5500_UART1_BASE, \
+			IRQ_DB5500_UART1, plat)
+#define db5500_add_uart2(parent, plat) \
+	dbx500_add_uart(parent, "uart2", U5500_UART2_BASE, \
+			IRQ_DB5500_UART2, plat)
+#define db5500_add_uart3(parent, plat) \
+	dbx500_add_uart(parent, "uart3", U5500_UART3_BASE, \
+			IRQ_DB5500_UART3, plat)
 
 #endif
diff --git a/arch/arm/mach-ux500/devices-db8500.h b/arch/arm/mach-ux500/devices-db8500.h
index cbd4a9a..9bd08ad 100644
--- a/arch/arm/mach-ux500/devices-db8500.h
+++ b/arch/arm/mach-ux500/devices-db8500.h
@@ -14,7 +14,9 @@ struct ske_keypad_platform_data;
 struct pl022_ssp_controller;
 
 static inline struct platform_device *
-db8500_add_ske_keypad(struct ske_keypad_platform_data *pdata)
+db8500_add_ske_keypad(struct device *parent,
+		      struct ske_keypad_platform_data *pdata,
+		      size_t size)
 {
 	return dbx500_add_platform_device_4k1irq("nmk-ske-keypad", -1,
 						 U8500_SKE_BASE,
@@ -22,80 +24,100 @@ db8500_add_ske_keypad(struct ske_keypad_platform_data *pdata)
 }
 
 static inline struct amba_device *
-db8500_add_ssp(const char *name, resource_size_t base, int irq,
-	       struct pl022_ssp_controller *pdata)
+db8500_add_ssp(struct device *parent, const char *name, resource_size_t base,
+	       int irq, struct pl022_ssp_controller *pdata)
 {
-	return dbx500_add_amba_device(name, base, irq, pdata, 0);
+	return dbx500_add_amba_device(parent, name, base, irq, pdata, 0);
 }
 
 
-#define db8500_add_i2c0(pdata) \
-	dbx500_add_i2c(0, U8500_I2C0_BASE, IRQ_DB8500_I2C0, pdata)
-#define db8500_add_i2c1(pdata) \
-	dbx500_add_i2c(1, U8500_I2C1_BASE, IRQ_DB8500_I2C1, pdata)
-#define db8500_add_i2c2(pdata) \
-	dbx500_add_i2c(2, U8500_I2C2_BASE, IRQ_DB8500_I2C2, pdata)
-#define db8500_add_i2c3(pdata) \
-	dbx500_add_i2c(3, U8500_I2C3_BASE, IRQ_DB8500_I2C3, pdata)
-#define db8500_add_i2c4(pdata) \
-	dbx500_add_i2c(4, U8500_I2C4_BASE, IRQ_DB8500_I2C4, pdata)
-
-#define db8500_add_msp0_i2s(pdata) \
-	dbx500_add_msp_i2s(0, U8500_MSP0_BASE, IRQ_DB8500_MSP0, pdata)
-#define db8500_add_msp1_i2s(pdata) \
-	dbx500_add_msp_i2s(1, U8500_MSP1_BASE, IRQ_DB8500_MSP1, pdata)
-#define db8500_add_msp2_i2s(pdata) \
-	dbx500_add_msp_i2s(2, U8500_MSP2_BASE, IRQ_DB8500_MSP2, pdata)
-#define db8500_add_msp3_i2s(pdata) \
-	dbx500_add_msp_i2s(3, U8500_MSP3_BASE, IRQ_DB8500_MSP1, pdata)
-
-#define db8500_add_msp0_spi(pdata) \
-	dbx500_add_msp_spi("msp0", U8500_MSP0_BASE, IRQ_DB8500_MSP0, pdata)
-#define db8500_add_msp1_spi(pdata) \
-	dbx500_add_msp_spi("msp1", U8500_MSP1_BASE, IRQ_DB8500_MSP1, pdata)
-#define db8500_add_msp2_spi(pdata) \
-	dbx500_add_msp_spi("msp2", U8500_MSP2_BASE, IRQ_DB8500_MSP2, pdata)
-#define db8500_add_msp3_spi(pdata) \
-	dbx500_add_msp_spi("msp3", U8500_MSP3_BASE, IRQ_DB8500_MSP1, pdata)
-
-#define db8500_add_rtc() \
-	dbx500_add_rtc(U8500_RTC_BASE, IRQ_DB8500_RTC);
-
-#define db8500_add_usb(rx_cfg, tx_cfg) \
-	ux500_add_usb(U8500_USBOTG_BASE, IRQ_DB8500_USBOTG, rx_cfg, tx_cfg)
-
-#define db8500_add_sdi0(pdata, pid) \
-	dbx500_add_sdi("sdi0", U8500_SDI0_BASE, IRQ_DB8500_SDMMC0, pdata, pid)
-#define db8500_add_sdi1(pdata, pid) \
-	dbx500_add_sdi("sdi1", U8500_SDI1_BASE, IRQ_DB8500_SDMMC1, pdata, pid)
-#define db8500_add_sdi2(pdata, pid) \
-	dbx500_add_sdi("sdi2", U8500_SDI2_BASE, IRQ_DB8500_SDMMC2, pdata, pid)
-#define db8500_add_sdi3(pdata, pid) \
-	dbx500_add_sdi("sdi3", U8500_SDI3_BASE, IRQ_DB8500_SDMMC3, pdata, pid)
-#define db8500_add_sdi4(pdata, pid) \
-	dbx500_add_sdi("sdi4", U8500_SDI4_BASE, IRQ_DB8500_SDMMC4, pdata, pid)
-#define db8500_add_sdi5(pdata, pid) \
-	dbx500_add_sdi("sdi5", U8500_SDI5_BASE, IRQ_DB8500_SDMMC5, pdata, pid)
-
-#define db8500_add_ssp0(pdata) \
-	db8500_add_ssp("ssp0", U8500_SSP0_BASE, IRQ_DB8500_SSP0, pdata)
-#define db8500_add_ssp1(pdata) \
-	db8500_add_ssp("ssp1", U8500_SSP1_BASE, IRQ_DB8500_SSP1, pdata)
-
-#define db8500_add_spi0(pdata) \
-	dbx500_add_spi("spi0", U8500_SPI0_BASE, IRQ_DB8500_SPI0, pdata, 0)
-#define db8500_add_spi1(pdata) \
-	dbx500_add_spi("spi1", U8500_SPI1_BASE, IRQ_DB8500_SPI1, pdata, 0)
-#define db8500_add_spi2(pdata) \
-	dbx500_add_spi("spi2", U8500_SPI2_BASE, IRQ_DB8500_SPI2, pdata, 0)
-#define db8500_add_spi3(pdata) \
-	dbx500_add_spi("spi3", U8500_SPI3_BASE, IRQ_DB8500_SPI3, pdata, 0)
-
-#define db8500_add_uart0(pdata) \
-	dbx500_add_uart("uart0", U8500_UART0_BASE, IRQ_DB8500_UART0, pdata)
-#define db8500_add_uart1(pdata) \
-	dbx500_add_uart("uart1", U8500_UART1_BASE, IRQ_DB8500_UART1, pdata)
-#define db8500_add_uart2(pdata) \
-	dbx500_add_uart("uart2", U8500_UART2_BASE, IRQ_DB8500_UART2, pdata)
+#define db8500_add_i2c0(parent, pdata) \
+	dbx500_add_i2c(parent, 0, U8500_I2C0_BASE, IRQ_DB8500_I2C0, pdata)
+#define db8500_add_i2c1(parent, pdata) \
+	dbx500_add_i2c(parent, 1, U8500_I2C1_BASE, IRQ_DB8500_I2C1, pdata)
+#define db8500_add_i2c2(parent, pdata) \
+	dbx500_add_i2c(parent, 2, U8500_I2C2_BASE, IRQ_DB8500_I2C2, pdata)
+#define db8500_add_i2c3(parent, pdata) \
+	dbx500_add_i2c(parent, 3, U8500_I2C3_BASE, IRQ_DB8500_I2C3, pdata)
+#define db8500_add_i2c4(parent, pdata) \
+	dbx500_add_i2c(parent, 4, U8500_I2C4_BASE, IRQ_DB8500_I2C4, pdata)
+
+#define db8500_add_msp0_i2s(parent, pdata) \
+	dbx500_add_msp_i2s(parent, 0, U8500_MSP0_BASE, IRQ_DB8500_MSP0, pdata)
+#define db8500_add_msp1_i2s(parent, pdata) \
+	dbx500_add_msp_i2s(parent, 1, U8500_MSP1_BASE, IRQ_DB8500_MSP1, pdata)
+#define db8500_add_msp2_i2s(parent, pdata) \
+	dbx500_add_msp_i2s(parent, 2, U8500_MSP2_BASE, IRQ_DB8500_MSP2, pdata)
+#define db8500_add_msp3_i2s(parent, pdata) \
+	dbx500_add_msp_i2s(parent, 3, U8500_MSP3_BASE, IRQ_DB8500_MSP1, pdata)
+
+#define db8500_add_msp0_spi(parent, pdata) \
+	dbx500_add_msp_spi(parent, "msp0", U8500_MSP0_BASE, \
+			   IRQ_DB8500_MSP0, pdata)
+#define db8500_add_msp1_spi(parent, pdata) \
+	dbx500_add_msp_spi(parent, "msp1", U8500_MSP1_BASE, \
+			   IRQ_DB8500_MSP1, pdata)
+#define db8500_add_msp2_spi(parent, pdata) \
+	dbx500_add_msp_spi(parent, "msp2", U8500_MSP2_BASE, \
+			   IRQ_DB8500_MSP2, pdata)
+#define db8500_add_msp3_spi(parent, pdata) \
+	dbx500_add_msp_spi(parent, "msp3", U8500_MSP3_BASE, \
+			   IRQ_DB8500_MSP1, pdata)
+
+#define db8500_add_rtc(parent) \
+	dbx500_add_rtc(parent, U8500_RTC_BASE, IRQ_DB8500_RTC);
+
+#define db8500_add_usb(parent, rx_cfg, tx_cfg) \
+	ux500_add_usb(parent, U8500_USBOTG_BASE, \
+		      IRQ_DB8500_USBOTG, rx_cfg, tx_cfg)
+
+#define db8500_add_sdi0(parent, pdata, pid) \
+	dbx500_add_sdi(parent, "sdi0", U8500_SDI0_BASE, \
+		       IRQ_DB8500_SDMMC0, pdata, pid)
+#define db8500_add_sdi1(parent, pdata, pid) \
+	dbx500_add_sdi(parent, "sdi1", U8500_SDI1_BASE, \
+		       IRQ_DB8500_SDMMC1, pdata, pid)
+#define db8500_add_sdi2(parent, pdata, pid) \
+	dbx500_add_sdi(parent, "sdi2", U8500_SDI2_BASE, \
+		       IRQ_DB8500_SDMMC2, pdata, pid)
+#define db8500_add_sdi3(parent, pdata, pid) \
+	dbx500_add_sdi(parent, "sdi3", U8500_SDI3_BASE, \
+		       IRQ_DB8500_SDMMC3, pdata, pid)
+#define db8500_add_sdi4(parent, pdata, pid) \
+	dbx500_add_sdi(parent, "sdi4", U8500_SDI4_BASE, \
+		       IRQ_DB8500_SDMMC4, pdata, pid)
+#define db8500_add_sdi5(parent, pdata, pid) \
+	dbx500_add_sdi(parent, "sdi5", U8500_SDI5_BASE, \
+		       IRQ_DB8500_SDMMC5, pdata, pid)
+
+#define db8500_add_ssp0(parent, pdata) \
+	db8500_add_ssp(parent, "ssp0", U8500_SSP0_BASE, \
+		       IRQ_DB8500_SSP0, pdata)
+#define db8500_add_ssp1(parent, pdata) \
+	db8500_add_ssp(parent, "ssp1", U8500_SSP1_BASE, \
+		       IRQ_DB8500_SSP1, pdata)
+
+#define db8500_add_spi0(parent, pdata) \
+	dbx500_add_spi(parent, "spi0", U8500_SPI0_BASE, \
+		       IRQ_DB8500_SPI0, pdata, 0)
+#define db8500_add_spi1(parent, pdata) \
+	dbx500_add_spi(parent, "spi1", U8500_SPI1_BASE, \
+		       IRQ_DB8500_SPI1, pdata, 0)
+#define db8500_add_spi2(parent, pdata) \
+	dbx500_add_spi(parent, "spi2", U8500_SPI2_BASE, \
+		       IRQ_DB8500_SPI2, pdata, 0)
+#define db8500_add_spi3(parent, pdata) \
+	dbx500_add_spi(parent, "spi3", U8500_SPI3_BASE, \
+		       IRQ_DB8500_SPI3, pdata, 0)
+
+#define db8500_add_uart0(parent, pdata) \
+	dbx500_add_uart(parent, "uart0", U8500_UART0_BASE, \
+			IRQ_DB8500_UART0, pdata)
+#define db8500_add_uart1(parent, pdata) \
+	dbx500_add_uart(parent, "uart1", U8500_UART1_BASE, \
+			IRQ_DB8500_UART1, pdata)
+#define db8500_add_uart2(parent, pdata) \
+	dbx500_add_uart(parent, "uart2", U8500_UART2_BASE, \
+			IRQ_DB8500_UART2, pdata)
 
 #endif
diff --git a/arch/arm/mach-ux500/dma-db5500.c b/arch/arm/mach-ux500/dma-db5500.c
index 1cfab68..41e9470 100644
--- a/arch/arm/mach-ux500/dma-db5500.c
+++ b/arch/arm/mach-ux500/dma-db5500.c
@@ -125,10 +125,11 @@ static struct platform_device dma40_device = {
 	.resource	= dma40_resources
 };
 
-void __init db5500_dma_init(void)
+void __init db5500_dma_init(struct device *parent)
 {
 	int ret;
 
+	dma40_device.dev.parent = parent;
 	ret = platform_device_register(&dma40_device);
 	if (ret)
 		dev_err(&dma40_device.dev, "unable to register device: %d\n", ret);
diff --git a/arch/arm/mach-ux500/include/mach/setup.h b/arch/arm/mach-ux500/include/mach/setup.h
index a7d363f..e46b8b1 100644
--- a/arch/arm/mach-ux500/include/mach/setup.h
+++ b/arch/arm/mach-ux500/include/mach/setup.h
@@ -18,14 +18,14 @@ void __init ux500_map_io(void);
 extern void __init u5500_map_io(void);
 extern void __init u8500_map_io(void);
 
-extern void __init u5500_init_devices(void);
-extern void __init u8500_init_devices(void);
+extern struct device * __init u5500_init_devices(void);
+extern struct device * __init u8500_init_devices(void);
 
 extern void __init ux500_init_irq(void);
 
-extern void __init u5500_sdi_init(void);
+extern void __init u5500_sdi_init(struct device *parent);
 
-extern void __init db5500_dma_init(void);
+extern void __init db5500_dma_init(struct device *parent);
 
 /* We re-use nomadik_timer for this platform */
 extern void nmdk_timer_init(void);
diff --git a/arch/arm/mach-ux500/include/mach/usb.h b/arch/arm/mach-ux500/include/mach/usb.h
index d3739d4..4c1cc50 100644
--- a/arch/arm/mach-ux500/include/mach/usb.h
+++ b/arch/arm/mach-ux500/include/mach/usb.h
@@ -20,6 +20,6 @@ struct ux500_musb_board_data {
 	bool (*dma_filter)(struct dma_chan *chan, void *filter_param);
 };
 
-void ux500_add_usb(resource_size_t base, int irq, int *dma_rx_cfg,
-	int *dma_tx_cfg);
+void ux500_add_usb(struct device *parent, resource_size_t base,
+		   int irq, int *dma_rx_cfg, int *dma_tx_cfg);
 #endif
diff --git a/arch/arm/mach-ux500/usb.c b/arch/arm/mach-ux500/usb.c
index 0a01cbd..bef6a31 100644
--- a/arch/arm/mach-ux500/usb.c
+++ b/arch/arm/mach-ux500/usb.c
@@ -146,8 +146,8 @@ static inline void ux500_usb_dma_update_tx_ch_config(int *dst_dev_type)
 		musb_dma_tx_ch[idx].dst_dev_type = dst_dev_type[idx];
 }
 
-void ux500_add_usb(resource_size_t base, int irq, int *dma_rx_cfg,
-	int *dma_tx_cfg)
+void ux500_add_usb(struct device *parent, resource_size_t base, int irq,
+		   int *dma_rx_cfg, int *dma_tx_cfg)
 {
 	ux500_musb_device.resource[0].start = base;
 	ux500_musb_device.resource[0].end = base + SZ_64K - 1;
-- 
1.7.5.4

[PATCH 0/6] ux500: Export SoC information and some platform clean-up

[Lee Jones]

This patch-set satisfies 4 objectives:
  1. Ensures each platform device can specify a suitable parent
  2. Provides a bus for SoC devices as a means to export information
  3. Allows ux500 to make use of the new SoC bus
  4. Cleans up unnecessary complexity from ux500 code 

 Documentation/ABI/testing/sysfs-devices-soc    |   24 ++++
 arch/arm/mach-ux500/Kconfig                    |    1 +
 arch/arm/mach-ux500/board-mop500-sdi.c         |   30 ++--
 arch/arm/mach-ux500/board-mop500.c             |   74 +++++++----
 arch/arm/mach-ux500/board-mop500.h             |    6 +-
 arch/arm/mach-ux500/board-u5500-sdi.c          |    4 +-
 arch/arm/mach-ux500/board-u5500.c              |   27 +++--
 arch/arm/mach-ux500/cpu-db5500.c               |   37 ++++-
 arch/arm/mach-ux500/cpu-db8500.c               |   45 +++++-
 arch/arm/mach-ux500/cpu.c                      |   67 +++++++++
 arch/arm/mach-ux500/devices-common.c           |   79 +++---------
 arch/arm/mach-ux500/devices-common.h           |   71 +++++-----
 arch/arm/mach-ux500/devices-db5500.h           |  116 +++++++++-------
 arch/arm/mach-ux500/devices-db8500.h           |  176 ++++++++++++++----------
 arch/arm/mach-ux500/dma-db5500.c               |    3 +-
 arch/arm/mach-ux500/include/mach/db8500-regs.h |    3 +
 arch/arm/mach-ux500/include/mach/setup.h       |   10 +-
 arch/arm/mach-ux500/include/mach/usb.h         |    4 +-
 arch/arm/mach-ux500/usb.c                      |    7 +-
 drivers/base/Kconfig                           |    3 +
 drivers/base/Makefile                          |    1 +
 drivers/base/soc.c                             |  115 +++++++++++++++
 include/linux/sys_soc.h                        |   38 +++++
 23 files changed, 639 insertions(+), 302 deletions(-)

[PATCH 1/6] mach-ux500: pass parent pointer to each platform device

[Lee Jones]

This patch provides a means for any device within ux500
platform code to allocate its own parent. This is particularly
prudent with the introduction of /sys/devices/socX, as a
device can now proclaim to be integral part of an SoC, rather
than a more generic platform device. Latter patches make good
use of this functionality.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 arch/arm/mach-ux500/board-mop500-sdi.c   |   30 +++---
 arch/arm/mach-ux500/board-mop500.c       |   62 ++++++-----
 arch/arm/mach-ux500/board-mop500.h       |    6 +-
 arch/arm/mach-ux500/board-u5500-sdi.c    |    4 +-
 arch/arm/mach-ux500/board-u5500.c        |   23 +++--
 arch/arm/mach-ux500/cpu-db5500.c         |   18 ++--
 arch/arm/mach-ux500/cpu-db8500.c         |   16 ++--
 arch/arm/mach-ux500/devices-common.c     |   13 ++-
 arch/arm/mach-ux500/devices-common.h     |   39 ++++---
 arch/arm/mach-ux500/devices-db5500.h     |  116 ++++++++++++---------
 arch/arm/mach-ux500/devices-db8500.h     |  166 +++++++++++++++++-------------
 arch/arm/mach-ux500/dma-db5500.c         |    3 +-
 arch/arm/mach-ux500/include/mach/setup.h |    4 +-
 arch/arm/mach-ux500/include/mach/usb.h   |    4 +-
 arch/arm/mach-ux500/usb.c                |    4 +-
 15 files changed, 286 insertions(+), 222 deletions(-)

diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c
index 6826fae..a36f00d 100644
--- a/arch/arm/mach-ux500/board-mop500-sdi.c
+++ b/arch/arm/mach-ux500/board-mop500-sdi.c
@@ -98,7 +98,7 @@ static struct mmci_platform_data mop500_sdi0_data = {
 #endif
 };
 
-static void sdi0_configure(void)
+static void sdi0_configure(struct device *parent)
 {
 	int ret;
 
@@ -118,17 +118,17 @@ static void sdi0_configure(void)
 
 	/* Add the device, force v2 to subrevision 1 */
 	if (cpu_is_u8500v2())
-		db8500_add_sdi0(&mop500_sdi0_data, 0x10480180);
+		db8500_add_sdi0(parent, &mop500_sdi0_data, 0x10480180);
 	else
-		db8500_add_sdi0(&mop500_sdi0_data, 0);
+		db8500_add_sdi0(parent, &mop500_sdi0_data, 0);
 }
 
-void mop500_sdi_tc35892_init(void)
+void mop500_sdi_tc35892_init(struct device *parent)
 {
 	mop500_sdi0_data.gpio_cd = GPIO_SDMMC_CD;
 	sdi0_en = GPIO_SDMMC_EN;
 	sdi0_vsel = GPIO_SDMMC_1V8_3V_SEL;
-	sdi0_configure();
+	sdi0_configure(parent);
 }
 
 /*
@@ -206,7 +206,7 @@ static struct mmci_platform_data mop500_sdi4_data = {
 #endif
 };
 
-void __init mop500_sdi_init(void)
+void __init mop500_sdi_init(struct device *parent)
 {
 	u32 periphid = 0;
 
@@ -217,10 +217,10 @@ void __init mop500_sdi_init(void)
 	if (!cpu_is_u8500v10())
 		mop500_sdi2_data.capabilities |= MMC_CAP_MMC_HIGHSPEED;
 
-	db8500_add_sdi2(&mop500_sdi2_data, periphid);
+	db8500_add_sdi2(parent, &mop500_sdi2_data, periphid);
 
 	/* On-board eMMC */
-	db8500_add_sdi4(&mop500_sdi4_data, periphid);
+	db8500_add_sdi4(parent, &mop500_sdi4_data, periphid);
 
 	/*
 	 * On boards with the TC35892 GPIO expander, sdi0 will finally
@@ -229,35 +229,35 @@ void __init mop500_sdi_init(void)
 	 */
 }
 
-void __init snowball_sdi_init(void)
+void __init snowball_sdi_init(struct device *parent)
 {
 	u32 periphid = 0x10480180;
 
 	mop500_sdi2_data.capabilities |= MMC_CAP_MMC_HIGHSPEED;
 
 	/* On-board eMMC */
-	db8500_add_sdi4(&mop500_sdi4_data, periphid);
+	db8500_add_sdi4(parent, &mop500_sdi4_data, periphid);
 
 	mop500_sdi0_data.gpio_cd = SNOWBALL_SDMMC_CD_GPIO;
 	mop500_sdi0_data.cd_invert = true;
 	sdi0_en = SNOWBALL_SDMMC_EN_GPIO;
 	sdi0_vsel = SNOWBALL_SDMMC_1V8_3V_GPIO;
-	sdi0_configure();
+	sdi0_configure(parent);
 }
 
-void __init hrefv60_sdi_init(void)
+void __init hrefv60_sdi_init(struct device *parent)
 {
 	u32 periphid = 0x10480180;
 
 	mop500_sdi2_data.capabilities |= MMC_CAP_MMC_HIGHSPEED;
 
-	db8500_add_sdi2(&mop500_sdi2_data, periphid);
+	db8500_add_sdi2(parent, &mop500_sdi2_data, periphid);
 
 	/* On-board eMMC */
-	db8500_add_sdi4(&mop500_sdi4_data, periphid);
+	db8500_add_sdi4(parent, &mop500_sdi4_data, periphid);
 
 	mop500_sdi0_data.gpio_cd = HREFV60_SDMMC_CD_GPIO;
 	sdi0_en = HREFV60_SDMMC_EN_GPIO;
 	sdi0_vsel = HREFV60_SDMMC_1V8_3V_GPIO;
-	sdi0_configure();
+	sdi0_configure(parent);
 }
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index 4d75b0d..2d4a7de 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -224,7 +224,12 @@ static struct tps6105x_platform_data mop500_tps61052_data = {
 
 static void mop500_tc35892_init(struct tc3589x *tc3589x, unsigned int base)
 {
-	mop500_sdi_tc35892_init();
+	struct device *parent = NULL;
+#if 0
+	/* FIXME: Is the sdi actually part of tc3589x? */
+	parent = tc3589x->dev;
+#endif
+	mop500_sdi_tc35892_init(parent);
 }
 
 static struct tc3589x_gpio_platform_data mop500_tc35892_gpio_data = {
@@ -351,12 +356,12 @@ U8500_I2C_CONTROLLER(1, 0xe, 1, 8, 100000, 200, I2C_FREQ_MODE_FAST);
 U8500_I2C_CONTROLLER(2,	0xe, 1, 8, 100000, 200, I2C_FREQ_MODE_FAST);
 U8500_I2C_CONTROLLER(3,	0xe, 1, 8, 100000, 200, I2C_FREQ_MODE_FAST);
 
-static void __init mop500_i2c_init(void)
+static void __init mop500_i2c_init(struct device *parent)
 {
-	db8500_add_i2c0(&u8500_i2c0_data);
-	db8500_add_i2c1(&u8500_i2c1_data);
-	db8500_add_i2c2(&u8500_i2c2_data);
-	db8500_add_i2c3(&u8500_i2c3_data);
+	db8500_add_i2c0(parent, &u8500_i2c0_data);
+	db8500_add_i2c1(parent, &u8500_i2c1_data);
+	db8500_add_i2c2(parent, &u8500_i2c2_data);
+	db8500_add_i2c3(parent, &u8500_i2c3_data);
 }
 
 static struct gpio_keys_button mop500_gpio_keys[] = {
@@ -449,9 +454,9 @@ static struct pl022_ssp_controller ssp0_platform_data = {
 	.num_chipselect = 5,
 };
 
-static void __init mop500_spi_init(void)
+static void __init mop500_spi_init(struct device *parent)
 {
-	db8500_add_ssp0(&ssp0_platform_data);
+	db8500_add_ssp0(parent, &ssp0_platform_data);
 }
 
 #ifdef CONFIG_STE_DMA40
@@ -585,11 +590,11 @@ static struct amba_pl011_data uart2_plat = {
 #endif
 };
 
-static void __init mop500_uart_init(void)
+static void __init mop500_uart_init(struct device *parent)
 {
-	db8500_add_uart0(&uart0_plat);
-	db8500_add_uart1(&uart1_plat);
-	db8500_add_uart2(&uart2_plat);
+	db8500_add_uart0(parent, &uart0_plat);
+	db8500_add_uart1(parent, &uart1_plat);
+	db8500_add_uart2(parent, &uart2_plat);
 }
 
 static struct platform_device *snowball_platform_devs[] __initdata = {
@@ -601,21 +606,22 @@ static struct platform_device *snowball_platform_devs[] __initdata = {
 
 static void __init mop500_init_machine(void)
 {
+	struct device *parent = NULL;
 	int i2c0_devs;
 
 	mop500_gpio_keys[0].gpio = GPIO_PROX_SENSOR;
 
-	u8500_init_devices();
+	parent = u8500_init_devices();
 
 	mop500_pins_init();
 
 	platform_add_devices(mop500_platform_devs,
 			ARRAY_SIZE(mop500_platform_devs));
 
-	mop500_i2c_init();
-	mop500_sdi_init();
-	mop500_spi_init();
-	mop500_uart_init();
+	mop500_i2c_init(parent);
+	mop500_sdi_init(parent);
+	mop500_spi_init(parent);
+	mop500_uart_init(parent);
 
 	i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
 
@@ -629,19 +635,20 @@ static void __init mop500_init_machine(void)
 
 static void __init snowball_init_machine(void)
 {
+	struct device *parent = NULL;
 	int i2c0_devs;
 
-	u8500_init_devices();
+	parent = u8500_init_devices();
 
 	snowball_pins_init();
 
 	platform_add_devices(snowball_platform_devs,
 			ARRAY_SIZE(snowball_platform_devs));
 
-	mop500_i2c_init();
-	snowball_sdi_init();
-	mop500_spi_init();
-	mop500_uart_init();
+	mop500_i2c_init(parent);
+	snowball_sdi_init(parent);
+	mop500_spi_init(parent);
+	mop500_uart_init(parent);
 
 	i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
 	i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs);
@@ -654,6 +661,7 @@ static void __init snowball_init_machine(void)
 
 static void __init hrefv60_init_machine(void)
 {
+	struct device *parent = NULL;
 	int i2c0_devs;
 
 	/*
@@ -663,17 +671,17 @@ static void __init hrefv60_init_machine(void)
 	 */
 	mop500_gpio_keys[0].gpio = HREFV60_PROX_SENSE_GPIO;
 
-	u8500_init_devices();
+	parent = u8500_init_devices();
 
 	hrefv60_pins_init();
 
 	platform_add_devices(mop500_platform_devs,
 			ARRAY_SIZE(mop500_platform_devs));
 
-	mop500_i2c_init();
-	mop500_sdi_init();
-	mop500_spi_init();
-	mop500_uart_init();
+	mop500_i2c_init(parent);
+	mop500_sdi_init(parent);
+	mop500_spi_init(parent);
+	mop500_uart_init(parent);
 
 	i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
 
diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h
index de18a2a..d011da2 100644
--- a/arch/arm/mach-ux500/board-mop500.h
+++ b/arch/arm/mach-ux500/board-mop500.h
@@ -39,9 +39,9 @@
 
 struct i2c_board_info;
 
-extern void mop500_sdi_init(void);
-extern void snowball_sdi_init(void);
-extern void mop500_sdi_tc35892_init(void);
+extern void mop500_sdi_init(struct device *parent);
+extern void snowball_sdi_init(struct device *parent);
+extern void mop500_sdi_tc35892_init(struct device *parent);
 void __init mop500_u8500uib_init(void);
 void __init mop500_stuib_init(void);
 void __init mop500_pins_init(void);
diff --git a/arch/arm/mach-ux500/board-u5500-sdi.c b/arch/arm/mach-ux500/board-u5500-sdi.c
index 739fb4c..3c70e97 100644
--- a/arch/arm/mach-ux500/board-u5500-sdi.c
+++ b/arch/arm/mach-ux500/board-u5500-sdi.c
@@ -66,9 +66,9 @@ static struct mmci_platform_data u5500_sdi0_data = {
 #endif
 };
 
-void __init u5500_sdi_init(void)
+void __init u5500_sdi_init(struct device *parent)
 {
 	nmk_config_pins(u5500_sdi_pins, ARRAY_SIZE(u5500_sdi_pins));
 
-	db5500_add_sdi0(&u5500_sdi0_data);
+	db5500_add_sdi0(parent, &u5500_sdi0_data);
 }
diff --git a/arch/arm/mach-ux500/board-u5500.c b/arch/arm/mach-ux500/board-u5500.c
index 5c9e665..3196b40a 100644
--- a/arch/arm/mach-ux500/board-u5500.c
+++ b/arch/arm/mach-ux500/board-u5500.c
@@ -96,9 +96,9 @@ static struct i2c_board_info __initdata u5500_i2c2_devices[] = {
 	},
 };
 
-static void __init u5500_i2c_init(void)
+static void __init u5500_i2c_init(struct device *parent)
 {
-	db5500_add_i2c2(&u5500_i2c2_data);
+	db5500_add_i2c2(parent, &u5500_i2c2_data);
 	i2c_register_board_info(2, ARRAY_AND_SIZE(u5500_i2c2_devices));
 }
 
@@ -125,20 +125,23 @@ static struct platform_device *u5500_platform_devices[] __initdata = {
 	&ab5500_device,
 };
 
-static void __init u5500_uart_init(void)
+static void __init u5500_uart_init(struct device *parent)
 {
-	db5500_add_uart0(NULL);
-	db5500_add_uart1(NULL);
-	db5500_add_uart2(NULL);
+	db5500_add_uart0(parent, NULL);
+	db5500_add_uart1(parent, NULL);
+	db5500_add_uart2(parent, NULL);
 }
 
 static void __init u5500_init_machine(void)
 {
-	u5500_init_devices();
+	struct device *parent = NULL;
+
+	parent = u5500_init_devices();
 	nmk_config_pins(u5500_pins, ARRAY_SIZE(u5500_pins));
-	u5500_i2c_init();
-	u5500_sdi_init();
-	u5500_uart_init();
+
+	u5500_i2c_init(parent);
+	u5500_sdi_init(parent);
+	u5500_uart_init(parent);
 
 	platform_add_devices(u5500_platform_devices,
 		ARRAY_SIZE(u5500_platform_devices));
diff --git a/arch/arm/mach-ux500/cpu-db5500.c b/arch/arm/mach-ux500/cpu-db5500.c
index e532c32..3995284 100644
--- a/arch/arm/mach-ux500/cpu-db5500.c
+++ b/arch/arm/mach-ux500/cpu-db5500.c
@@ -174,13 +174,13 @@ static resource_size_t __initdata db5500_gpio_base[] = {
 	U5500_GPIOBANK7_BASE,
 };
 
-static void __init db5500_add_gpios(void)
+static void __init db5500_add_gpios(struct device *parent)
 {
 	struct nmk_gpio_platform_data pdata = {
 		/* No custom data yet */
 	};
 
-	dbx500_add_gpios(ARRAY_AND_SIZE(db5500_gpio_base),
+	dbx500_add_gpios(parent, ARRAY_AND_SIZE(db5500_gpio_base),
 			 IRQ_DB5500_GPIO0, &pdata);
 }
 
@@ -220,13 +220,17 @@ static int usb_db5500_tx_dma_cfg[] = {
 	DB5500_DMA_DEV38_USB_OTG_OEP_8
 };
 
-void __init u5500_init_devices(void)
+struct device* __init u5500_init_devices(void)
 {
-	db5500_add_gpios();
-	db5500_dma_init();
-	db5500_add_rtc();
-	db5500_add_usb(usb_db5500_rx_dma_cfg, usb_db5500_tx_dma_cfg);
+	/* FIXME: First parameter to be a real parent. */
+	db5500_add_gpios(NULL);
+	db5500_dma_init(NULL);
+	db5500_add_rtc(NULL);
+	db5500_add_usb(NULL, usb_db5500_rx_dma_cfg, usb_db5500_tx_dma_cfg);
 
 	platform_add_devices(db5500_platform_devs,
 			     ARRAY_SIZE(db5500_platform_devs));
+
+	/* FIXME: Return value to be a real parent. */
+	return NULL;
 }
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index 4598b06..375171e 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -153,7 +153,7 @@ static resource_size_t __initdata db8500_gpio_base[] = {
 	U8500_GPIOBANK8_BASE,
 };
 
-static void __init db8500_add_gpios(void)
+static void __init db8500_add_gpios(struct device *parent)
 {
 	struct nmk_gpio_platform_data pdata = {
 		/* No custom data yet */
@@ -162,7 +162,7 @@ static void __init db8500_add_gpios(void)
 	if (cpu_is_u8500v2())
 		pdata.supports_sleepmode = true;
 
-	dbx500_add_gpios(ARRAY_AND_SIZE(db8500_gpio_base),
+	dbx500_add_gpios(parent, ARRAY_AND_SIZE(db8500_gpio_base),
 			 IRQ_DB8500_GPIO0, &pdata);
 }
 
@@ -191,17 +191,19 @@ static int usb_db8500_tx_dma_cfg[] = {
 /*
  * This function is called from the board init
  */
-void __init u8500_init_devices(void)
+struct device* __init u8500_init_devices(void)
 {
 	if (cpu_is_u8500ed())
 		dma40_u8500ed_fixup();
 
-	db8500_add_rtc();
-	db8500_add_gpios();
-	db8500_add_usb(usb_db8500_rx_dma_cfg, usb_db8500_tx_dma_cfg);
+	/* FIXME: First parameter to be a real parent. */
+	db8500_add_rtc(NULL);
+	db8500_add_gpios(NULL);
+	db8500_add_usb(NULL, usb_db8500_rx_dma_cfg, usb_db8500_tx_dma_cfg);
 
 	platform_device_register_simple("cpufreq-u8500", -1, NULL, 0);
 	platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs));
 
-	return ;
+	/* FIXME: Return value to be a real parent. */
+	return NULL;
 }
diff --git a/arch/arm/mach-ux500/devices-common.c b/arch/arm/mach-ux500/devices-common.c
index 13a4ce0..51fd658 100644
--- a/arch/arm/mach-ux500/devices-common.c
+++ b/arch/arm/mach-ux500/devices-common.c
@@ -20,8 +20,9 @@
 #include "devices-common.h"
 
 struct amba_device *
-dbx500_add_amba_device(const char *name, resource_size_t base,
-		       int irq, void *pdata, unsigned int periphid)
+dbx500_add_amba_device(struct device *parent, const char *name,
+		       resource_size_t base, int irq, void *pdata,
+		       unsigned int periphid)
 {
 	struct amba_device *dev;
 	int ret;
@@ -109,7 +110,7 @@ dbx500_add_platform_device_4k1irq(const char *name, int id,
 }
 
 static struct platform_device *
-dbx500_add_gpio(int id, resource_size_t addr, int irq,
+dbx500_add_gpio(struct device *parent, int id, resource_size_t addr, int irq,
 		struct nmk_gpio_platform_data *pdata)
 {
 	struct resource resources[] = {
@@ -130,8 +131,8 @@ dbx500_add_gpio(int id, resource_size_t addr, int irq,
 				pdata, sizeof(*pdata));
 }
 
-void dbx500_add_gpios(resource_size_t *base, int num, int irq,
-		      struct nmk_gpio_platform_data *pdata)
+void dbx500_add_gpios(struct device *parent, resource_size_t *base, int num,
+		      int irq, struct nmk_gpio_platform_data *pdata)
 {
 	int first = 0;
 	int i;
@@ -141,6 +142,6 @@ void dbx500_add_gpios(resource_size_t *base, int num, int irq,
 		pdata->first_irq = NOMADIK_GPIO_TO_IRQ(first);
 		pdata->num_gpio = 32;
 
-		dbx500_add_gpio(i, base[i], irq, pdata);
+		dbx500_add_gpio(parent, i, base[i], irq, pdata);
 	}
 }
diff --git a/arch/arm/mach-ux500/devices-common.h b/arch/arm/mach-ux500/devices-common.h
index 7825705..f8adff8 100644
--- a/arch/arm/mach-ux500/devices-common.h
+++ b/arch/arm/mach-ux500/devices-common.h
@@ -9,7 +9,7 @@
 #define __DEVICES_COMMON_H
 
 extern struct amba_device *
-dbx500_add_amba_device(const char *name, resource_size_t base,
+dbx500_add_amba_device(struct device *parent, const char *name, resource_size_t base,
 		       int irq, void *pdata, unsigned int periphid);
 
 extern struct platform_device *
@@ -20,43 +20,46 @@ dbx500_add_platform_device_4k1irq(const char *name, int id,
 struct spi_master_cntlr;
 
 static inline struct amba_device *
-dbx500_add_msp_spi(const char *name, resource_size_t base, int irq,
+dbx500_add_msp_spi(struct device *parent, const char *name,
+		   resource_size_t base, int irq,
 		   struct spi_master_cntlr *pdata)
 {
-	return dbx500_add_amba_device(name, base, irq, pdata, 0);
+	return dbx500_add_amba_device(parent, name, base, irq,
+				      pdata, 0);
 }
 
 static inline struct amba_device *
-dbx500_add_spi(const char *name, resource_size_t base, int irq,
-	       struct spi_master_cntlr *pdata,
+dbx500_add_spi(struct device *parent, const char *name, resource_size_t base,
+	       int irq, struct spi_master_cntlr *pdata,
 	       u32 periphid)
 {
-	return dbx500_add_amba_device(name, base, irq, pdata, periphid);
+	return dbx500_add_amba_device(parent, name, base, irq,
+				      pdata, periphid);
 }
 
 struct mmci_platform_data;
 
 static inline struct amba_device *
-dbx500_add_sdi(const char *name, resource_size_t base, int irq,
-	       struct mmci_platform_data *pdata,
-	       u32 periphid)
+dbx500_add_sdi(struct device *parent, const char *name, resource_size_t base,
+	       int irq, struct mmci_platform_data *pdata, u32 periphid)
 {
-	return dbx500_add_amba_device(name, base, irq, pdata, periphid);
+	return dbx500_add_amba_device(parent, name, base, irq,
+				      pdata, periphid);
 }
 
 struct amba_pl011_data;
 
 static inline struct amba_device *
-dbx500_add_uart(const char *name, resource_size_t base, int irq,
-		struct amba_pl011_data *pdata)
+dbx500_add_uart(struct device *parent, const char *name, resource_size_t base,
+		int irq, struct amba_pl011_data *pdata)
 {
-	return dbx500_add_amba_device(name, base, irq, pdata, 0);
+	return dbx500_add_amba_device(parent, name, base, irq, pdata, 0);
 }
 
 struct nmk_i2c_controller;
 
 static inline struct platform_device *
-dbx500_add_i2c(int id, resource_size_t base, int irq,
+dbx500_add_i2c(struct device *parent, int id, resource_size_t base, int irq,
 	       struct nmk_i2c_controller *pdata)
 {
 	return dbx500_add_platform_device_4k1irq("nmk-i2c", id, base, irq,
@@ -74,14 +77,14 @@ dbx500_add_msp_i2s(int id, resource_size_t base, int irq,
 }
 
 static inline struct amba_device *
-dbx500_add_rtc(resource_size_t base, int irq)
+dbx500_add_rtc(struct device *parent, resource_size_t base, int irq)
 {
-	return dbx500_add_amba_device("rtc-pl031", base, irq, NULL, 0);
+	return dbx500_add_amba_device(parent, "rtc-pl031", base, irq, NULL, 0);
 }
 
 struct nmk_gpio_platform_data;
 
-void dbx500_add_gpios(resource_size_t *base, int num, int irq,
-		      struct nmk_gpio_platform_data *pdata);
+void dbx500_add_gpios(struct device *parent, resource_size_t *base, int num,
+		      int irq, struct nmk_gpio_platform_data *pdata);
 
 #endif
diff --git a/arch/arm/mach-ux500/devices-db5500.h b/arch/arm/mach-ux500/devices-db5500.h
index 0c4bccd..e709555 100644
--- a/arch/arm/mach-ux500/devices-db5500.h
+++ b/arch/arm/mach-ux500/devices-db5500.h
@@ -10,70 +10,90 @@
 
 #include "devices-common.h"
 
-#define db5500_add_i2c1(pdata) \
-	dbx500_add_i2c(1, U5500_I2C1_BASE, IRQ_DB5500_I2C1, pdata)
-#define db5500_add_i2c2(pdata) \
-	dbx500_add_i2c(2, U5500_I2C2_BASE, IRQ_DB5500_I2C2, pdata)
-#define db5500_add_i2c3(pdata) \
-	dbx500_add_i2c(3, U5500_I2C3_BASE, IRQ_DB5500_I2C3, pdata)
+#define db5500_add_i2c1(parent, pdata) \
+	dbx500_add_i2c(parent, 1, U5500_I2C1_BASE, IRQ_DB5500_I2C1, pdata)
+#define db5500_add_i2c2(parent, pdata) \
+	dbx500_add_i2c(parent, 2, U5500_I2C2_BASE, IRQ_DB5500_I2C2, pdata)
+#define db5500_add_i2c3(parent, pdata) \
+	dbx500_add_i2c(parent, 3, U5500_I2C3_BASE, IRQ_DB5500_I2C3, pdata)
 
-#define db5500_add_msp0_i2s(pdata) \
-	dbx500_add_msp_i2s(0, U5500_MSP0_BASE, IRQ_DB5500_MSP0, pdata)
-#define db5500_add_msp1_i2s(pdata) \
-	dbx500_add_msp_i2s(1, U5500_MSP1_BASE, IRQ_DB5500_MSP1, pdata)
-#define db5500_add_msp2_i2s(pdata) \
-	dbx500_add_msp_i2s(2, U5500_MSP2_BASE, IRQ_DB5500_MSP2, pdata)
+#define db5500_add_msp0_spi(parent, pdata) \
+	dbx500_add_msp_spi(parent, "msp0", U5500_MSP0_BASE, \
+			   IRQ_DB5500_MSP0, pdata)
+#define db5500_add_msp1_spi(parent, pdata) \
+	dbx500_add_msp_spi(parent, "msp1", U5500_MSP1_BASE, \
+			   IRQ_DB5500_MSP1, pdata)
+#define db5500_add_msp2_spi(parent, pdata) \
+	dbx500_add_msp_spi(parent, "msp2", U5500_MSP2_BASE, \
+			   IRQ_DB5500_MSP2, pdata)
 
-#define db5500_add_msp0_spi(pdata) \
-	dbx500_add_msp_spi("msp0", U5500_MSP0_BASE, IRQ_DB5500_MSP0, pdata)
-#define db5500_add_msp1_spi(pdata) \
-	dbx500_add_msp_spi("msp1", U5500_MSP1_BASE, IRQ_DB5500_MSP1, pdata)
-#define db5500_add_msp2_spi(pdata) \
-	dbx500_add_msp_spi("msp2", U5500_MSP2_BASE, IRQ_DB5500_MSP2, pdata)
+#define db5500_add_msp0_spi(parent, pdata) \
+	dbx500_add_msp_spi(parent, "msp0", U5500_MSP0_BASE, \
+			  IRQ_DB5500_MSP0, pdata)
+#define db5500_add_msp1_spi(parent, pdata) \
+	dbx500_add_msp_spi(parent, "msp1", U5500_MSP1_BASE, \
+			  IRQ_DB5500_MSP1, pdata)
+#define db5500_add_msp2_spi(parent, pdata) \
+	dbx500_add_msp_spi(parent, "msp2", U5500_MSP2_BASE, \
+			  IRQ_DB5500_MSP2, pdata)
 
-#define db5500_add_rtc() \
-	dbx500_add_rtc(U5500_RTC_BASE, IRQ_DB5500_RTC);
+#define db5500_add_rtc(parent) \
+	dbx500_add_rtc(parent, U5500_RTC_BASE, IRQ_DB5500_RTC);
 
-#define db5500_add_usb(rx_cfg, tx_cfg) \
-	ux500_add_usb(U5500_USBOTG_BASE, IRQ_DB5500_USBOTG, rx_cfg, tx_cfg)
+#define db5500_add_usb(parent, rx_cfg, tx_cfg) \
+	ux500_add_usb(parent, U5500_USBOTG_BASE, \
+		      IRQ_DB5500_USBOTG, rx_cfg, tx_cfg)
 
-#define db5500_add_sdi0(pdata) \
-	dbx500_add_sdi("sdi0", U5500_SDI0_BASE, IRQ_DB5500_SDMMC0, pdata, \
+#define db5500_add_sdi0(parent, pdata) \
+	dbx500_add_sdi(parent, "sdi0", U5500_SDI0_BASE, \
+		       IRQ_DB5500_SDMMC0, pdata,	\
 		       0x10480180)
-#define db5500_add_sdi1(pdata) \
-	dbx500_add_sdi("sdi1", U5500_SDI1_BASE, IRQ_DB5500_SDMMC1, pdata, \
+#define db5500_add_sdi1(parent, pdata) \
+	dbx500_add_sdi(parent, "sdi1", U5500_SDI1_BASE, \
+		       IRQ_DB5500_SDMMC1, pdata,	\
 		       0x10480180)
-#define db5500_add_sdi2(pdata) \
-	dbx500_add_sdi("sdi2", U5500_SDI2_BASE, IRQ_DB5500_SDMMC2, pdata \
+#define db5500_add_sdi2(parent, pdata) \
+	dbx500_add_sdi(parent, "sdi2", U5500_SDI2_BASE, \
+		       IRQ_DB5500_SDMMC2, pdata		\
 		       0x10480180)
-#define db5500_add_sdi3(pdata) \
-	dbx500_add_sdi("sdi3", U5500_SDI3_BASE, IRQ_DB5500_SDMMC3, pdata \
+#define db5500_add_sdi3(parent, pdata) \
+	dbx500_add_sdi(parent, "sdi3", U5500_SDI3_BASE, \
+		       IRQ_DB5500_SDMMC3, pdata		\
 		       0x10480180)
-#define db5500_add_sdi4(pdata) \
-	dbx500_add_sdi("sdi4", U5500_SDI4_BASE, IRQ_DB5500_SDMMC4, pdata \
+#define db5500_add_sdi4(parent, pdata) \
+	dbx500_add_sdi(parent, "sdi4", U5500_SDI4_BASE, \
+		       IRQ_DB5500_SDMMC4, pdata		\
 		       0x10480180)
 
 /* This one has a bad peripheral ID in the U5500 silicon */
-#define db5500_add_spi0(pdata) \
-	dbx500_add_spi("spi0", U5500_SPI0_BASE, IRQ_DB5500_SPI0, pdata, \
+#define db5500_add_spi0(parent, pdata) \
+	dbx500_add_spi(parent, "spi0", U5500_SPI0_BASE, \
+		       IRQ_DB5500_SPI0, pdata,		\
 		       0x10080023)
-#define db5500_add_spi1(pdata) \
-	dbx500_add_spi("spi1", U5500_SPI1_BASE, IRQ_DB5500_SPI1, pdata, \
+#define db5500_add_spi1(parent, pdata) \
+	dbx500_add_spi(parent, "spi1", U5500_SPI1_BASE, \
+		       IRQ_DB5500_SPI1, pdata,		\
 		       0x10080023)
-#define db5500_add_spi2(pdata) \
-	dbx500_add_spi("spi2", U5500_SPI2_BASE, IRQ_DB5500_SPI2, pdata \
+#define db5500_add_spi2(parent, pdata) \
+	dbx500_add_spi(parent, "spi2", U5500_SPI2_BASE, \
+		       IRQ_DB5500_SPI2, pdata		\
 		       0x10080023)
-#define db5500_add_spi3(pdata) \
-	dbx500_add_spi("spi3", U5500_SPI3_BASE, IRQ_DB5500_SPI3, pdata \
+#define db5500_add_spi3(parent, pdata) \
+	dbx500_add_spi(parent, "spi3", U5500_SPI3_BASE, \
+		       IRQ_DB5500_SPI3, pdata		\
 		       0x10080023)
 
-#define db5500_add_uart0(plat) \
-	dbx500_add_uart("uart0", U5500_UART0_BASE, IRQ_DB5500_UART0, plat)
-#define db5500_add_uart1(plat) \
-	dbx500_add_uart("uart1", U5500_UART1_BASE, IRQ_DB5500_UART1, plat)
-#define db5500_add_uart2(plat) \
-	dbx500_add_uart("uart2", U5500_UART2_BASE, IRQ_DB5500_UART2, plat)
-#define db5500_add_uart3(plat) \
-	dbx500_add_uart("uart3", U5500_UART3_BASE, IRQ_DB5500_UART3, plat)
+#define db5500_add_uart0(parent, plat) \
+	dbx500_add_uart(parent, "uart0", U5500_UART0_BASE, \
+			IRQ_DB5500_UART0, plat)
+#define db5500_add_uart1(parent, plat) \
+	dbx500_add_uart(parent, "uart1", U5500_UART1_BASE, \
+			IRQ_DB5500_UART1, plat)
+#define db5500_add_uart2(parent, plat) \
+	dbx500_add_uart(parent, "uart2", U5500_UART2_BASE, \
+			IRQ_DB5500_UART2, plat)
+#define db5500_add_uart3(parent, plat) \
+	dbx500_add_uart(parent, "uart3", U5500_UART3_BASE, \
+			IRQ_DB5500_UART3, plat)
 
 #endif
diff --git a/arch/arm/mach-ux500/devices-db8500.h b/arch/arm/mach-ux500/devices-db8500.h
index cbd4a9a..9bd08ad 100644
--- a/arch/arm/mach-ux500/devices-db8500.h
+++ b/arch/arm/mach-ux500/devices-db8500.h
@@ -14,7 +14,9 @@ struct ske_keypad_platform_data;
 struct pl022_ssp_controller;
 
 static inline struct platform_device *
-db8500_add_ske_keypad(struct ske_keypad_platform_data *pdata)
+db8500_add_ske_keypad(struct device *parent,
+		      struct ske_keypad_platform_data *pdata,
+		      size_t size)
 {
 	return dbx500_add_platform_device_4k1irq("nmk-ske-keypad", -1,
 						 U8500_SKE_BASE,
@@ -22,80 +24,100 @@ db8500_add_ske_keypad(struct ske_keypad_platform_data *pdata)
 }
 
 static inline struct amba_device *
-db8500_add_ssp(const char *name, resource_size_t base, int irq,
-	       struct pl022_ssp_controller *pdata)
+db8500_add_ssp(struct device *parent, const char *name, resource_size_t base,
+	       int irq, struct pl022_ssp_controller *pdata)
 {
-	return dbx500_add_amba_device(name, base, irq, pdata, 0);
+	return dbx500_add_amba_device(parent, name, base, irq, pdata, 0);
 }
 
 
-#define db8500_add_i2c0(pdata) \
-	dbx500_add_i2c(0, U8500_I2C0_BASE, IRQ_DB8500_I2C0, pdata)
-#define db8500_add_i2c1(pdata) \
-	dbx500_add_i2c(1, U8500_I2C1_BASE, IRQ_DB8500_I2C1, pdata)
-#define db8500_add_i2c2(pdata) \
-	dbx500_add_i2c(2, U8500_I2C2_BASE, IRQ_DB8500_I2C2, pdata)
-#define db8500_add_i2c3(pdata) \
-	dbx500_add_i2c(3, U8500_I2C3_BASE, IRQ_DB8500_I2C3, pdata)
-#define db8500_add_i2c4(pdata) \
-	dbx500_add_i2c(4, U8500_I2C4_BASE, IRQ_DB8500_I2C4, pdata)
-
-#define db8500_add_msp0_i2s(pdata) \
-	dbx500_add_msp_i2s(0, U8500_MSP0_BASE, IRQ_DB8500_MSP0, pdata)
-#define db8500_add_msp1_i2s(pdata) \
-	dbx500_add_msp_i2s(1, U8500_MSP1_BASE, IRQ_DB8500_MSP1, pdata)
-#define db8500_add_msp2_i2s(pdata) \
-	dbx500_add_msp_i2s(2, U8500_MSP2_BASE, IRQ_DB8500_MSP2, pdata)
-#define db8500_add_msp3_i2s(pdata) \
-	dbx500_add_msp_i2s(3, U8500_MSP3_BASE, IRQ_DB8500_MSP1, pdata)
-
-#define db8500_add_msp0_spi(pdata) \
-	dbx500_add_msp_spi("msp0", U8500_MSP0_BASE, IRQ_DB8500_MSP0, pdata)
-#define db8500_add_msp1_spi(pdata) \
-	dbx500_add_msp_spi("msp1", U8500_MSP1_BASE, IRQ_DB8500_MSP1, pdata)
-#define db8500_add_msp2_spi(pdata) \
-	dbx500_add_msp_spi("msp2", U8500_MSP2_BASE, IRQ_DB8500_MSP2, pdata)
-#define db8500_add_msp3_spi(pdata) \
-	dbx500_add_msp_spi("msp3", U8500_MSP3_BASE, IRQ_DB8500_MSP1, pdata)
-
-#define db8500_add_rtc() \
-	dbx500_add_rtc(U8500_RTC_BASE, IRQ_DB8500_RTC);
-
-#define db8500_add_usb(rx_cfg, tx_cfg) \
-	ux500_add_usb(U8500_USBOTG_BASE, IRQ_DB8500_USBOTG, rx_cfg, tx_cfg)
-
-#define db8500_add_sdi0(pdata, pid) \
-	dbx500_add_sdi("sdi0", U8500_SDI0_BASE, IRQ_DB8500_SDMMC0, pdata, pid)
-#define db8500_add_sdi1(pdata, pid) \
-	dbx500_add_sdi("sdi1", U8500_SDI1_BASE, IRQ_DB8500_SDMMC1, pdata, pid)
-#define db8500_add_sdi2(pdata, pid) \
-	dbx500_add_sdi("sdi2", U8500_SDI2_BASE, IRQ_DB8500_SDMMC2, pdata, pid)
-#define db8500_add_sdi3(pdata, pid) \
-	dbx500_add_sdi("sdi3", U8500_SDI3_BASE, IRQ_DB8500_SDMMC3, pdata, pid)
-#define db8500_add_sdi4(pdata, pid) \
-	dbx500_add_sdi("sdi4", U8500_SDI4_BASE, IRQ_DB8500_SDMMC4, pdata, pid)
-#define db8500_add_sdi5(pdata, pid) \
-	dbx500_add_sdi("sdi5", U8500_SDI5_BASE, IRQ_DB8500_SDMMC5, pdata, pid)
-
-#define db8500_add_ssp0(pdata) \
-	db8500_add_ssp("ssp0", U8500_SSP0_BASE, IRQ_DB8500_SSP0, pdata)
-#define db8500_add_ssp1(pdata) \
-	db8500_add_ssp("ssp1", U8500_SSP1_BASE, IRQ_DB8500_SSP1, pdata)
-
-#define db8500_add_spi0(pdata) \
-	dbx500_add_spi("spi0", U8500_SPI0_BASE, IRQ_DB8500_SPI0, pdata, 0)
-#define db8500_add_spi1(pdata) \
-	dbx500_add_spi("spi1", U8500_SPI1_BASE, IRQ_DB8500_SPI1, pdata, 0)
-#define db8500_add_spi2(pdata) \
-	dbx500_add_spi("spi2", U8500_SPI2_BASE, IRQ_DB8500_SPI2, pdata, 0)
-#define db8500_add_spi3(pdata) \
-	dbx500_add_spi("spi3", U8500_SPI3_BASE, IRQ_DB8500_SPI3, pdata, 0)
-
-#define db8500_add_uart0(pdata) \
-	dbx500_add_uart("uart0", U8500_UART0_BASE, IRQ_DB8500_UART0, pdata)
-#define db8500_add_uart1(pdata) \
-	dbx500_add_uart("uart1", U8500_UART1_BASE, IRQ_DB8500_UART1, pdata)
-#define db8500_add_uart2(pdata) \
-	dbx500_add_uart("uart2", U8500_UART2_BASE, IRQ_DB8500_UART2, pdata)
+#define db8500_add_i2c0(parent, pdata) \
+	dbx500_add_i2c(parent, 0, U8500_I2C0_BASE, IRQ_DB8500_I2C0, pdata)
+#define db8500_add_i2c1(parent, pdata) \
+	dbx500_add_i2c(parent, 1, U8500_I2C1_BASE, IRQ_DB8500_I2C1, pdata)
+#define db8500_add_i2c2(parent, pdata) \
+	dbx500_add_i2c(parent, 2, U8500_I2C2_BASE, IRQ_DB8500_I2C2, pdata)
+#define db8500_add_i2c3(parent, pdata) \
+	dbx500_add_i2c(parent, 3, U8500_I2C3_BASE, IRQ_DB8500_I2C3, pdata)
+#define db8500_add_i2c4(parent, pdata) \
+	dbx500_add_i2c(parent, 4, U8500_I2C4_BASE, IRQ_DB8500_I2C4, pdata)
+
+#define db8500_add_msp0_i2s(parent, pdata) \
+	dbx500_add_msp_i2s(parent, 0, U8500_MSP0_BASE, IRQ_DB8500_MSP0, pdata)
+#define db8500_add_msp1_i2s(parent, pdata) \
+	dbx500_add_msp_i2s(parent, 1, U8500_MSP1_BASE, IRQ_DB8500_MSP1, pdata)
+#define db8500_add_msp2_i2s(parent, pdata) \
+	dbx500_add_msp_i2s(parent, 2, U8500_MSP2_BASE, IRQ_DB8500_MSP2, pdata)
+#define db8500_add_msp3_i2s(parent, pdata) \
+	dbx500_add_msp_i2s(parent, 3, U8500_MSP3_BASE, IRQ_DB8500_MSP1, pdata)
+
+#define db8500_add_msp0_spi(parent, pdata) \
+	dbx500_add_msp_spi(parent, "msp0", U8500_MSP0_BASE, \
+			   IRQ_DB8500_MSP0, pdata)
+#define db8500_add_msp1_spi(parent, pdata) \
+	dbx500_add_msp_spi(parent, "msp1", U8500_MSP1_BASE, \
+			   IRQ_DB8500_MSP1, pdata)
+#define db8500_add_msp2_spi(parent, pdata) \
+	dbx500_add_msp_spi(parent, "msp2", U8500_MSP2_BASE, \
+			   IRQ_DB8500_MSP2, pdata)
+#define db8500_add_msp3_spi(parent, pdata) \
+	dbx500_add_msp_spi(parent, "msp3", U8500_MSP3_BASE, \
+			   IRQ_DB8500_MSP1, pdata)
+
+#define db8500_add_rtc(parent) \
+	dbx500_add_rtc(parent, U8500_RTC_BASE, IRQ_DB8500_RTC);
+
+#define db8500_add_usb(parent, rx_cfg, tx_cfg) \
+	ux500_add_usb(parent, U8500_USBOTG_BASE, \
+		      IRQ_DB8500_USBOTG, rx_cfg, tx_cfg)
+
+#define db8500_add_sdi0(parent, pdata, pid) \
+	dbx500_add_sdi(parent, "sdi0", U8500_SDI0_BASE, \
+		       IRQ_DB8500_SDMMC0, pdata, pid)
+#define db8500_add_sdi1(parent, pdata, pid) \
+	dbx500_add_sdi(parent, "sdi1", U8500_SDI1_BASE, \
+		       IRQ_DB8500_SDMMC1, pdata, pid)
+#define db8500_add_sdi2(parent, pdata, pid) \
+	dbx500_add_sdi(parent, "sdi2", U8500_SDI2_BASE, \
+		       IRQ_DB8500_SDMMC2, pdata, pid)
+#define db8500_add_sdi3(parent, pdata, pid) \
+	dbx500_add_sdi(parent, "sdi3", U8500_SDI3_BASE, \
+		       IRQ_DB8500_SDMMC3, pdata, pid)
+#define db8500_add_sdi4(parent, pdata, pid) \
+	dbx500_add_sdi(parent, "sdi4", U8500_SDI4_BASE, \
+		       IRQ_DB8500_SDMMC4, pdata, pid)
+#define db8500_add_sdi5(parent, pdata, pid) \
+	dbx500_add_sdi(parent, "sdi5", U8500_SDI5_BASE, \
+		       IRQ_DB8500_SDMMC5, pdata, pid)
+
+#define db8500_add_ssp0(parent, pdata) \
+	db8500_add_ssp(parent, "ssp0", U8500_SSP0_BASE, \
+		       IRQ_DB8500_SSP0, pdata)
+#define db8500_add_ssp1(parent, pdata) \
+	db8500_add_ssp(parent, "ssp1", U8500_SSP1_BASE, \
+		       IRQ_DB8500_SSP1, pdata)
+
+#define db8500_add_spi0(parent, pdata) \
+	dbx500_add_spi(parent, "spi0", U8500_SPI0_BASE, \
+		       IRQ_DB8500_SPI0, pdata, 0)
+#define db8500_add_spi1(parent, pdata) \
+	dbx500_add_spi(parent, "spi1", U8500_SPI1_BASE, \
+		       IRQ_DB8500_SPI1, pdata, 0)
+#define db8500_add_spi2(parent, pdata) \
+	dbx500_add_spi(parent, "spi2", U8500_SPI2_BASE, \
+		       IRQ_DB8500_SPI2, pdata, 0)
+#define db8500_add_spi3(parent, pdata) \
+	dbx500_add_spi(parent, "spi3", U8500_SPI3_BASE, \
+		       IRQ_DB8500_SPI3, pdata, 0)
+
+#define db8500_add_uart0(parent, pdata) \
+	dbx500_add_uart(parent, "uart0", U8500_UART0_BASE, \
+			IRQ_DB8500_UART0, pdata)
+#define db8500_add_uart1(parent, pdata) \
+	dbx500_add_uart(parent, "uart1", U8500_UART1_BASE, \
+			IRQ_DB8500_UART1, pdata)
+#define db8500_add_uart2(parent, pdata) \
+	dbx500_add_uart(parent, "uart2", U8500_UART2_BASE, \
+			IRQ_DB8500_UART2, pdata)
 
 #endif
diff --git a/arch/arm/mach-ux500/dma-db5500.c b/arch/arm/mach-ux500/dma-db5500.c
index 1cfab68..41e9470 100644
--- a/arch/arm/mach-ux500/dma-db5500.c
+++ b/arch/arm/mach-ux500/dma-db5500.c
@@ -125,10 +125,11 @@ static struct platform_device dma40_device = {
 	.resource	= dma40_resources
 };
 
-void __init db5500_dma_init(void)
+void __init db5500_dma_init(struct device *parent)
 {
 	int ret;
 
+	dma40_device.dev.parent = parent;
 	ret = platform_device_register(&dma40_device);
 	if (ret)
 		dev_err(&dma40_device.dev, "unable to register device: %d\n", ret);
diff --git a/arch/arm/mach-ux500/include/mach/setup.h b/arch/arm/mach-ux500/include/mach/setup.h
index a7d363f..88e8d6b 100644
--- a/arch/arm/mach-ux500/include/mach/setup.h
+++ b/arch/arm/mach-ux500/include/mach/setup.h
@@ -23,9 +23,9 @@ extern void __init u8500_init_devices(void);
 
 extern void __init ux500_init_irq(void);
 
-extern void __init u5500_sdi_init(void);
+extern void __init u5500_sdi_init(struct device *parent);
 
-extern void __init db5500_dma_init(void);
+extern void __init db5500_dma_init(struct device *parent);
 
 /* We re-use nomadik_timer for this platform */
 extern void nmdk_timer_init(void);
diff --git a/arch/arm/mach-ux500/include/mach/usb.h b/arch/arm/mach-ux500/include/mach/usb.h
index d3739d4..4c1cc50 100644
--- a/arch/arm/mach-ux500/include/mach/usb.h
+++ b/arch/arm/mach-ux500/include/mach/usb.h
@@ -20,6 +20,6 @@ struct ux500_musb_board_data {
 	bool (*dma_filter)(struct dma_chan *chan, void *filter_param);
 };
 
-void ux500_add_usb(resource_size_t base, int irq, int *dma_rx_cfg,
-	int *dma_tx_cfg);
+void ux500_add_usb(struct device *parent, resource_size_t base,
+		   int irq, int *dma_rx_cfg, int *dma_tx_cfg);
 #endif
diff --git a/arch/arm/mach-ux500/usb.c b/arch/arm/mach-ux500/usb.c
index 0a01cbd..bef6a31 100644
--- a/arch/arm/mach-ux500/usb.c
+++ b/arch/arm/mach-ux500/usb.c
@@ -146,8 +146,8 @@ static inline void ux500_usb_dma_update_tx_ch_config(int *dst_dev_type)
 		musb_dma_tx_ch[idx].dst_dev_type = dst_dev_type[idx];
 }
 
-void ux500_add_usb(resource_size_t base, int irq, int *dma_rx_cfg,
-	int *dma_tx_cfg)
+void ux500_add_usb(struct device *parent, resource_size_t base, int irq,
+		   int *dma_rx_cfg, int *dma_tx_cfg)
 {
 	ux500_musb_device.resource[0].start = base;
 	ux500_musb_device.resource[0].end = base + SZ_64K - 1;
-- 
1.7.5.4