From: aneesh@ti.com (Aneesh V)
To: linux-arm-kernel@lists.infradead.org
Subject: [RFC v4 PATCH 3/4] arm: dts: EMIF and LPDDR2 device tree data for OMAP4 boards
Date: Sat, 4 Feb 2012 18:12:08 +0530 [thread overview]
Message-ID: <1328359329-685-4-git-send-email-aneesh@ti.com> (raw)
In-Reply-To: <1328359329-685-1-git-send-email-aneesh@ti.com>
Device tree data for the EMIF sdram controllers in OMAP4
and LPDDR2 memory devices attached to OMAP4 boards.
Cc: Rajendra Nayak <rnayak@ti.com>
Cc: Benoit Cousson <b-cousson@ti.com>
Signed-off-by: Aneesh V <aneesh@ti.com>
---
arch/arm/boot/dts/elpida_ecb240abacn.dtsi | 71 +++++++++++++++++++++++++++++
arch/arm/boot/dts/omap4-panda.dts | 13 +++++
arch/arm/boot/dts/omap4-sdp.dts | 13 +++++
arch/arm/boot/dts/omap4.dtsi | 18 +++++++
4 files changed, 115 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/boot/dts/elpida_ecb240abacn.dtsi
diff --git a/arch/arm/boot/dts/elpida_ecb240abacn.dtsi b/arch/arm/boot/dts/elpida_ecb240abacn.dtsi
new file mode 100644
index 0000000..b384861
--- /dev/null
+++ b/arch/arm/boot/dts/elpida_ecb240abacn.dtsi
@@ -0,0 +1,71 @@
+/*
+ * Common devices used in different OMAP boards
+ */
+
+/ {
+ elpida_ECB240ABACN: lpddr2 {
+ compatible = "Elpida,ECB240ABACN","jedec,lpddr2-s4";
+ density = <2048>;
+ io-width = <32>;
+
+ tRPab-min-tck = <3>;
+ tRCD-min-tck = <3>;
+ tWR-min-tck = <3>;
+ tRASmin-min-tck = <3>;
+ tRRD-min-tck = <2>;
+ tWTR-min-tck = <2>;
+ tXP-min-tck = <2>;
+ tRTP-min-tck = <2>;
+ tCKE-min-tck = <3>;
+ tCKESR-min-tck = <3>;
+ tFAW-min-tck = <8>;
+
+ timings_elpida_ECB240ABACN_400mhz: lpddr2-timings at 0 {
+ compatible = "jedec,lpddr2-timings";
+ min-freq = <10000000>;
+ max-freq = <400000000>;
+ tRPab = <21000>;
+ tRCD = <18000>;
+ tWR = <15000>;
+ tRAS-min = <42000>;
+ tRRD = <10000>;
+ tWTR = <7500>;
+ tXP = <7500>;
+ tRTP = <7500>;
+ tCKESR = <15000>;
+ tDQSCK-max = <5500>;
+ tFAW = <50000>;
+ tZQCS = <90000>;
+ tZQCL = <360000>;
+ tZQinit = <1000000>;
+ tRAS-max-ns = <70000>;
+ tRTW = <7500>;
+ tAONPD = <1000>;
+ tDQSCK-max-derated = <6000>;
+ };
+
+ timings_elpida_ECB240ABACN_200mhz: lpddr2-timings at 1 {
+ compatible = "jedec,lpddr2-timings";
+ min-freq = <10000000>;
+ max-freq = <200000000>;
+ tRPab = <21000>;
+ tRCD = <18000>;
+ tWR = <15000>;
+ tRAS-min = <42000>;
+ tRRD = <10000>;
+ tWTR = <10000>;
+ tXP = <7500>;
+ tRTP = <7500>;
+ tCKESR = <15000>;
+ tDQSCK-max = <5500>;
+ tFAW = <50000>;
+ tZQCS = <90000>;
+ tZQCL = <360000>;
+ tZQinit = <1000000>;
+ tRAS-max-ns = <70000>;
+ tRTW = <7500>;
+ tAONPD = <1000>;
+ tDQSCK-max-derated = <6000>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/omap4-panda.dts b/arch/arm/boot/dts/omap4-panda.dts
index 9755ad5..f548523 100644
--- a/arch/arm/boot/dts/omap4-panda.dts
+++ b/arch/arm/boot/dts/omap4-panda.dts
@@ -8,6 +8,7 @@
/dts-v1/;
/include/ "omap4.dtsi"
+/include/ "elpida_ecb240abacn.dtsi"
/ {
model = "TI OMAP4 PandaBoard";
@@ -17,4 +18,16 @@
device_type = "memory";
reg = <0x80000000 0x40000000>; /* 1 GB */
};
+
+ ocp {
+ emif1: emif at 0x4c000000 {
+ cs1-used;
+ device-handle = <&elpida_ECB240ABACN>;
+ };
+
+ emif2: emif at 0x4d000000 {
+ cs1-used;
+ device-handle = <&elpida_ECB240ABACN>;
+ };
+ };
};
diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
index 63c6b2b..6dc08bc 100644
--- a/arch/arm/boot/dts/omap4-sdp.dts
+++ b/arch/arm/boot/dts/omap4-sdp.dts
@@ -8,6 +8,7 @@
/dts-v1/;
/include/ "omap4.dtsi"
+/include/ "elpida_ecb240abacn.dtsi"
/ {
model = "TI OMAP4 SDP board";
@@ -17,4 +18,16 @@
device_type = "memory";
reg = <0x80000000 0x40000000>; /* 1 GB */
};
+
+ ocp {
+ emif1: emif at 0x4c000000 {
+ cs1-used;
+ device-handle = <&elpida_ECB240ABACN>;
+ };
+
+ emif2: emif at 0x4d000000 {
+ cs1-used;
+ device-handle = <&elpida_ECB240ABACN>;
+ };
+ };
};
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index 70a44f6..fe3664a 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -127,5 +127,23 @@
ti,hwmods = "uart4";
clock-frequency = <48000000>;
};
+
+ emif1: emif at 0x4c000000 {
+ compatible = "ti,emif-4d";
+ ti,hwmods = "emif1";
+ phy-type = <1>;
+ hw-caps-read-idle-ctrl;
+ hw-caps-ll-interface;
+ hw-caps-temp-alert;
+ };
+
+ emif2: emif at 0x4d000000 {
+ compatible = "ti,emif-4d";
+ ti,hwmods = "emif2";
+ phy-type = <1>;
+ hw-caps-read-idle-ctrl;
+ hw-caps-ll-interface;
+ hw-caps-temp-alert;
+ };
};
};
--
1.7.1
next prev parent reply other threads:[~2012-02-04 12:42 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-02-04 12:42 [RFC v4 PATCH 0/4] dt: device tree support for TI EMIF driver Aneesh V
2012-02-04 12:42 ` [RFC v4 PATCH 1/4] dt: device tree bindings for LPDDR2 memories Aneesh V
2012-02-04 12:42 ` [RFC v4 PATCH 2/4] dt: emif: device tree bindings for TI's EMIF sdram controller Aneesh V
2012-02-04 12:42 ` Aneesh V [this message]
2012-02-04 12:42 ` [RFC v4 PATCH 4/4] misc: emif: add device tree support to emif driver Aneesh V
2012-02-23 11:05 ` [RFC v4 PATCH 0/4] dt: device tree support for TI EMIF driver Aneesh V
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1328359329-685-4-git-send-email-aneesh@ti.com \
--to=aneesh@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).