From: paul.liu@linaro.org (Ying-Chun Liu (PaulLiu))
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 1/2] mfd: Add anatop mfd driver
Date: Thu, 9 Feb 2012 04:51:25 +0800 [thread overview]
Message-ID: <1328734286-30091-1-git-send-email-paul.liu@linaro.org> (raw)
In-Reply-To: <1324980994-18462-1-git-send-email-paul.liu@linaro.org>
From: "Ying-Chun Liu (PaulLiu)" <paul.liu@linaro.org>
Anatop is a mfd chip embedded in Freescale i.MX6Q SoC.
Anatop provides regulators and thermal.
This driver handles the address space and the operation of the mfd device.
Signed-off-by: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org>
Cc: Samuel Ortiz <sameo@linux.intel.com>
---
drivers/mfd/Kconfig | 6 ++
drivers/mfd/Makefile | 1 +
drivers/mfd/anatop-mfd.c | 152 ++++++++++++++++++++++++++++++++++++++++++++
include/linux/mfd/anatop.h | 39 +++++++++++
4 files changed, 198 insertions(+), 0 deletions(-)
create mode 100644 drivers/mfd/anatop-mfd.c
create mode 100644 include/linux/mfd/anatop.h
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index cd13e9f..4f71627 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -830,6 +830,12 @@ config MFD_INTEL_MSIC
Passage) chip. This chip embeds audio, battery, GPIO, etc.
devices used in Intel Medfield platforms.
+config MFD_ANATOP
+ bool "Support for Anatop"
+ depends on SOC_IMX6Q
+ help
+ Select this option to enable Anatop MFD driver.
+
endmenu
endif
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index b953bab..8e11060 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -112,3 +112,4 @@ obj-$(CONFIG_TPS65911_COMPARATOR) += tps65911-comparator.o
obj-$(CONFIG_MFD_AAT2870_CORE) += aat2870-core.o
obj-$(CONFIG_MFD_INTEL_MSIC) += intel_msic.o
obj-$(CONFIG_MFD_S5M_CORE) += s5m-core.o s5m-irq.o
+obj-$(CONFIG_MFD_ANATOP) += anatop-mfd.o
diff --git a/drivers/mfd/anatop-mfd.c b/drivers/mfd/anatop-mfd.c
new file mode 100644
index 0000000..58c6054
--- /dev/null
+++ b/drivers/mfd/anatop-mfd.c
@@ -0,0 +1,152 @@
+/*
+ * Anatop MFD driver
+ *
+ * Copyright (C) 2012 Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org>
+ * Copyright (C) 2012 Linaro
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/of_address.h>
+#include <linux/mfd/anatop.h>
+
+static u32 anatop_read(struct anatop *adata, u32 addr, int bit_shift, int bits)
+{
+ u32 val;
+ int mask;
+ if (bits == 32)
+ mask = 0xff;
+ else
+ mask = (1 << bits) - 1;
+
+ val = ioread32(adata->ioreg+addr);
+ val = (val >> bit_shift) & mask;
+ return val;
+}
+
+static void anatop_write(struct anatop *adata, u32 addr, int bit_shift,
+ int bits, u32 data)
+{
+ u32 val;
+ int mask;
+ if (bits == 32)
+ mask = 0xff;
+ else
+ mask = (1 << bits) - 1;
+
+ val = ioread32(adata->ioreg+addr) & ~(mask << bit_shift);
+ iowrite32((data << bit_shift) | val, adata->ioreg);
+}
+
+static const struct of_device_id of_anatop_regulator_match[] = {
+ {
+ .compatible = "fsl,anatop-regulator",
+ },
+ {
+ .compatible = "fsl,anatop-thermal",
+ },
+ { },
+};
+
+static int of_anatop_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *np = dev->of_node;
+ u64 ofaddr;
+ u64 ofsize;
+ void *ioreg;
+ struct anatop *drvdata;
+ int ret = 0;
+ const __be32 *rval;
+
+ rval = of_get_address(np, 0, &ofsize, NULL);
+ if (rval)
+ ofaddr = be32_to_cpu(*rval);
+ else
+ return -EINVAL;
+
+ ioreg = ioremap(ofaddr, ofsize);
+ if (!ioreg)
+ return -EINVAL;
+ drvdata = devm_kzalloc(dev, sizeof(struct anatop), GFP_KERNEL);
+ if (!drvdata)
+ return -EINVAL;
+ drvdata->ioreg = ioreg;
+ drvdata->read = anatop_read;
+ drvdata->write = anatop_write;
+ platform_set_drvdata(pdev, drvdata);
+ of_platform_bus_probe(np, of_anatop_regulator_match, dev);
+ return ret;
+}
+
+static int of_anatop_remove(struct platform_device *pdev)
+{
+ return 0;
+}
+
+static const struct of_device_id of_anatop_match[] = {
+ {
+ .compatible = "fsl,imx6q-anatop",
+ },
+ { },
+};
+
+static struct platform_driver anatop_of_driver = {
+ .driver = {
+ .name = "anatop-mfd",
+ .owner = THIS_MODULE,
+ .of_match_table = of_anatop_match,
+ },
+ .probe = of_anatop_probe,
+ .remove = of_anatop_remove,
+};
+
+static int __init anatop_init(void)
+{
+ int ret;
+ ret = platform_driver_register(&anatop_of_driver);
+ return ret;
+}
+
+static void __exit anatop_exit(void)
+{
+ platform_driver_unregister(&anatop_of_driver);
+}
+
+postcore_initcall(anatop_init);
+module_exit(anatop_exit);
+
+MODULE_AUTHOR("Ying-Chun Liu (PaulLiu)");
+MODULE_DESCRIPTION("ANATOP MFD driver");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/mfd/anatop.h b/include/linux/mfd/anatop.h
new file mode 100644
index 0000000..4425538
--- /dev/null
+++ b/include/linux/mfd/anatop.h
@@ -0,0 +1,39 @@
+/*
+ * anatop.h - Anatop MFD driver
+ *
+ * Copyright (C) 2012 Ying-Chun Liu (PaulLiu) <paulliu@debian.org>
+ * Copyright (C) 2012 Linaro
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __LINUX_MFD_ANATOP_H
+#define __LINUX_MFD_ANATOP_H
+
+/**
+ * anatop - MFD data
+ * @ioreg: ioremap register
+ * @read: function to read bits from the device
+ * @write: function to write bits to the device
+ */
+struct anatop {
+ void *ioreg;
+ u32 (*read) (struct anatop *adata, u32 addr, int bit_shift, int bits);
+ void (*write) (struct anatop *adata, u32 addr, int bit_shift,
+ int bits, u32 data);
+
+};
+
+#endif /* __LINUX_MFD_ANATOP_H */
--
1.7.8.3
next parent reply other threads:[~2012-02-08 20:51 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1324980994-18462-1-git-send-email-paul.liu@linaro.org>
2012-02-08 20:51 ` Ying-Chun Liu (PaulLiu) [this message]
2012-02-08 20:51 ` [PATCH v4 2/2] Regulator: Add Anatop regulator driver Ying-Chun Liu (PaulLiu)
2012-02-09 11:24 ` Mark Brown
2012-02-11 6:36 ` Shawn Guo
2012-02-11 13:17 ` Mark Brown
2012-02-11 6:05 ` [PATCH v4 1/2] mfd: Add anatop mfd driver Shawn Guo
2012-02-21 11:17 ` Samuel Ortiz
2012-03-01 9:19 ` Ying-Chun Liu (PaulLiu)
2012-03-01 9:10 ` [PATCH v5 " Ying-Chun Liu (PaulLiu)
2012-03-01 9:10 ` [PATCH v5 2/2] Regulator: Add Anatop regulator driver Ying-Chun Liu (PaulLiu)
2012-03-01 11:17 ` Mark Brown
2012-03-01 11:30 ` [PATCH v5 1/2] mfd: Add anatop mfd driver Mark Brown
2012-03-02 7:00 ` [PATCH v6 " Ying-Chun Liu (PaulLiu)
2012-03-02 7:00 ` [PATCH v6 2/2] Regulator: Add Anatop regulator driver Ying-Chun Liu (PaulLiu)
2012-03-04 6:51 ` Shawn Guo
2012-03-04 13:29 ` Mark Brown
2012-03-02 7:07 ` [PATCH v6 1/2] mfd: Add anatop mfd driver Venu Byravarasu
2012-03-02 7:51 ` Ying-Chun Liu (PaulLiu)
2012-03-02 8:02 ` Venu Byravarasu
2012-03-02 14:00 ` Peter Korsgaard
2012-03-03 17:39 ` [PATCH v7 " Ying-Chun Liu (PaulLiu)
2012-03-03 17:58 ` Mark Brown
2012-03-04 5:25 ` Shawn Guo
2012-03-04 5:42 ` Shawn Guo
2012-03-04 5:55 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1328734286-30091-1-git-send-email-paul.liu@linaro.org \
--to=paul.liu@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).