From: nicolas.ferre@atmel.com (Nicolas Ferre)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 00/18] at91 first cleanup series for 3.4
Date: Fri, 17 Feb 2012 18:49:52 +0100 [thread overview]
Message-ID: <1329501010-30468-1-git-send-email-nicolas.ferre@atmel.com> (raw)
This series removes the at91_sys_read/write() functions that where
used for all System Controller devices. The static offsets that were
used prevented us from compiling several AT91 SoC support in a single
zImage.
The other cleanup is the move of some early console initialization.
All this goes on top of current material that is already in arm-soc
git tree (merge of all at91/* branches).
Jean-Christophe PLAGNIOL-VILLARD (18):
ARM: at91: factorise duplicated at91sam9 idle
ARM: at91/at91x40: remove use of at91_sys_read/write
ARM: at91: make matrix register base soc independent
ARM: at91: make ST (System Timer) soc independent
ARM: at91/pm_slowclock: rename register to named define
ARM: at91/pm_slowclock: function slow_clock() accepts parameters
ARM: at91: move at91rm9200 sdramc defines to at91rm9200_sdramc.h
ARM: at91: make sdram/ddr register base soc independent
ARM: at91/pm_slowclock: add runtime detection of memory contoller
ARM: at91/PMC: make register base soc independent
ARM: at91/rtc-at91sam9: each SoC can select the RTT device to use
ARM: at91:rtc/rtc-at91sam9: ioremap register bank
ARM: at91/rtc-at91sam9: pass the GPBR to use via ressources
ARM: at91: finally drop at91_sys_read/write
ARM: at91: merge SRAM Memory banks thanks to mirroring
Atmel: move console default platform_device to serial driver
ARM: at91/board-dt: drop default console
ARM: at91/board-dt: move at91_initialize() to init_irq()
arch/arm/mach-at91/at91rm9200.c | 7 +-
arch/arm/mach-at91/at91rm9200_devices.c | 14 +-
arch/arm/mach-at91/at91rm9200_time.c | 37 ++-
arch/arm/mach-at91/at91sam9260.c | 23 +-
arch/arm/mach-at91/at91sam9260_devices.c | 31 ++-
arch/arm/mach-at91/at91sam9261.c | 10 +-
arch/arm/mach-at91/at91sam9261_devices.c | 24 ++-
arch/arm/mach-at91/at91sam9263.c | 11 +-
arch/arm/mach-at91/at91sam9263_devices.c | 49 +++-
arch/arm/mach-at91/at91sam9_alt_reset.S | 12 +-
arch/arm/mach-at91/at91sam9g45.c | 11 +-
arch/arm/mach-at91/at91sam9g45_devices.c | 24 ++-
arch/arm/mach-at91/at91sam9g45_reset.S | 12 +-
arch/arm/mach-at91/at91sam9rl.c | 10 +-
arch/arm/mach-at91/at91sam9rl_devices.c | 24 ++-
arch/arm/mach-at91/at91sam9x5.c | 5 +-
arch/arm/mach-at91/at91x40.c | 2 +-
arch/arm/mach-at91/at91x40_time.c | 28 ++-
arch/arm/mach-at91/board-cpu9krea.c | 5 +-
arch/arm/mach-at91/board-cpuat91.c | 1 +
arch/arm/mach-at91/board-dt.c | 16 +-
arch/arm/mach-at91/board-eco920.c | 5 +-
arch/arm/mach-at91/board-kb9202.c | 1 +
arch/arm/mach-at91/board-picotux200.c | 1 +
arch/arm/mach-at91/board-rm9200dk.c | 1 +
arch/arm/mach-at91/board-rm9200ek.c | 1 +
arch/arm/mach-at91/board-yl-9200.c | 3 +-
arch/arm/mach-at91/clock.c | 81 ++++---
arch/arm/mach-at91/generic.h | 10 +
arch/arm/mach-at91/include/mach/at91_matrix.h | 23 ++
arch/arm/mach-at91/include/mach/at91_pmc.h | 56 +++--
arch/arm/mach-at91/include/mach/at91_ramc.h | 32 +++
arch/arm/mach-at91/include/mach/at91_st.h | 32 ++-
arch/arm/mach-at91/include/mach/at91rm9200.h | 10 +-
arch/arm/mach-at91/include/mach/at91rm9200_mc.h | 58 +----
.../arm/mach-at91/include/mach/at91rm9200_sdramc.h | 63 +++++
arch/arm/mach-at91/include/mach/at91sam9260.h | 14 +-
.../mach-at91/include/mach/at91sam9260_matrix.h | 36 ++--
arch/arm/mach-at91/include/mach/at91sam9261.h | 10 +-
.../mach-at91/include/mach/at91sam9261_matrix.h | 18 +-
arch/arm/mach-at91/include/mach/at91sam9263.h | 12 +-
.../mach-at91/include/mach/at91sam9263_matrix.h | 74 +++---
arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h | 6 -
arch/arm/mach-at91/include/mach/at91sam9_sdramc.h | 6 -
arch/arm/mach-at91/include/mach/at91sam9g45.h | 12 +-
.../mach-at91/include/mach/at91sam9g45_matrix.h | 84 +++---
arch/arm/mach-at91/include/mach/at91sam9rl.h | 7 +-
.../arm/mach-at91/include/mach/at91sam9rl_matrix.h | 42 ++--
arch/arm/mach-at91/include/mach/at91sam9x5.h | 5 +-
arch/arm/mach-at91/include/mach/at91x40.h | 18 +-
arch/arm/mach-at91/include/mach/hardware.h | 3 +-
arch/arm/mach-at91/include/mach/io.h | 18 --
arch/arm/mach-at91/pm.c | 35 ++-
arch/arm/mach-at91/pm.h | 11 +-
arch/arm/mach-at91/pm_slowclock.S | 271 ++++++++++----------
arch/arm/mach-at91/setup.c | 9 +
arch/avr32/mach-at32ap/at32ap700x.c | 2 -
drivers/pcmcia/at91_cf.c | 5 +-
drivers/rtc/rtc-at91sam9.c | 103 ++++-----
drivers/tty/serial/atmel_serial.c | 2 +
drivers/usb/gadget/at91_udc.c | 9 +-
drivers/usb/gadget/atmel_usba_udc.c | 6 +-
drivers/watchdog/at91rm9200_wdt.c | 8 +-
63 files changed, 877 insertions(+), 682 deletions(-)
create mode 100644 arch/arm/mach-at91/include/mach/at91_matrix.h
create mode 100644 arch/arm/mach-at91/include/mach/at91_ramc.h
create mode 100644 arch/arm/mach-at91/include/mach/at91rm9200_sdramc.h
Best regards,
next reply other threads:[~2012-02-17 17:49 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-02-17 17:49 Nicolas Ferre [this message]
2012-02-17 17:49 ` [PATCH 01/18] ARM: at91: factorise duplicated at91sam9 idle Nicolas Ferre
2012-02-17 17:49 ` [PATCH 02/18] ARM: at91/at91x40: remove use of at91_sys_read/write Nicolas Ferre
2012-02-17 17:49 ` [PATCH 03/18] ARM: at91: make matrix register base soc independent Nicolas Ferre
2012-02-17 17:49 ` [PATCH 04/18] ARM: at91: make ST (System Timer) " Nicolas Ferre
2012-02-20 0:22 ` Ryan Mallon
2012-02-20 1:38 ` Jean-Christophe PLAGNIOL-VILLARD
2012-02-20 1:52 ` Ryan Mallon
2012-02-20 3:02 ` Jean-Christophe PLAGNIOL-VILLARD
2012-02-20 3:16 ` Ryan Mallon
2012-02-20 3:23 ` Jean-Christophe PLAGNIOL-VILLARD
2012-02-20 3:48 ` Ryan Mallon
2012-02-20 3:49 ` Jean-Christophe PLAGNIOL-VILLARD
2012-02-20 7:33 ` Russell King - ARM Linux
2012-02-20 9:18 ` Jean-Christophe PLAGNIOL-VILLARD
2012-02-17 17:49 ` [PATCH 05/18] ARM: at91/pm_slowclock: rename register to named define Nicolas Ferre
2012-02-17 17:49 ` [PATCH 06/18] ARM: at91/pm_slowclock: function slow_clock() accepts parameters Nicolas Ferre
2012-02-17 17:49 ` [PATCH 07/18] ARM: at91: move at91rm9200 sdramc defines to at91rm9200_sdramc.h Nicolas Ferre
2012-02-17 17:50 ` [PATCH 08/18] ARM: at91: make sdram/ddr register base soc independent Nicolas Ferre
2012-02-17 17:50 ` [PATCH 09/18] ARM: at91/pm_slowclock: add runtime detection of memory contoller Nicolas Ferre
2012-02-17 17:50 ` [PATCH 10/18] ARM: at91/PMC: make register base soc independent Nicolas Ferre
2012-02-20 0:27 ` Ryan Mallon
2012-02-17 17:50 ` [PATCH 11/18] ARM: at91/rtc-at91sam9: each SoC can select the RTT device to use Nicolas Ferre
2012-02-20 0:32 ` Ryan Mallon
2012-02-20 1:25 ` Jean-Christophe PLAGNIOL-VILLARD
2012-02-17 17:50 ` [PATCH 12/18] ARM: at91:rtc/rtc-at91sam9: ioremap register bank Nicolas Ferre
2012-02-17 17:50 ` [PATCH 13/18] ARM: at91/rtc-at91sam9: pass the GPBR to use via ressources Nicolas Ferre
2012-02-20 0:43 ` Ryan Mallon
2012-02-20 1:20 ` Jean-Christophe PLAGNIOL-VILLARD
2012-02-20 7:36 ` Russell King - ARM Linux
2012-02-20 9:16 ` Jean-Christophe PLAGNIOL-VILLARD
2012-02-20 10:04 ` Russell King - ARM Linux
2012-02-20 11:21 ` Nicolas Ferre
2012-02-20 14:45 ` [PATCH] ARM: at91/rtc-at91sam9: rework resources assignment Nicolas Ferre
2012-02-20 15:06 ` Russell King - ARM Linux
2012-02-20 20:04 ` Ryan Mallon
2012-02-17 17:50 ` [PATCH 14/18] ARM: at91: finally drop at91_sys_read/write Nicolas Ferre
2012-02-17 17:50 ` [PATCH 15/18] ARM: at91: merge SRAM Memory banks thanks to mirroring Nicolas Ferre
2012-02-17 17:50 ` [PATCH 16/18] Atmel: move console default platform_device to serial driver Nicolas Ferre
2012-02-18 9:17 ` Hans-Christian Egtvedt
2012-02-19 7:07 ` Jean-Christophe PLAGNIOL-VILLARD
2012-02-17 17:50 ` [PATCH 17/18] ARM: at91/board-dt: drop default console Nicolas Ferre
2012-02-17 17:50 ` [PATCH 18/18] ARM: at91/board-dt: move at91_initialize() to init_irq() Nicolas Ferre
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1329501010-30468-1-git-send-email-nicolas.ferre@atmel.com \
--to=nicolas.ferre@atmel.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).