From: nicolas.ferre@atmel.com (Nicolas Ferre)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 00/19] at91 first cleanup series for 3.4
Date: Wed, 22 Feb 2012 10:39:26 +0100 [thread overview]
Message-ID: <1329903585-30738-1-git-send-email-nicolas.ferre@atmel.com> (raw)
It is the second revision of this series of cleanup. It includes
enhancements adviced by Ryan Mallon and Russell King.
This series removes the at91_sys_read/write() functions that where
used for all System Controller devices. The static offsets that were
used prevented us from compiling several AT91 SoC support in a single
zImage.
The other cleanup is the move of some early console initialization.
All this goes on top of current material that is already in arm-soc
git tree (merge of all at91/* branches).
----------------------------------------------------------------
Jean-Christophe PLAGNIOL-VILLARD (18):
ARM: at91: factorise duplicated at91sam9 idle
ARM: at91/at91x40: remove use of at91_sys_read/write
ARM: at91: make matrix register base soc independent
ARM: at91: make ST (System Timer) soc independent
ARM: at91/pm_slowclock: rename register to named define
ARM: at91/pm_slowclock: function slow_clock() accepts parameters
ARM: at91: move at91rm9200 sdramc defines to at91rm9200_sdramc.h
ARM: at91: make sdram/ddr register base soc independent
ARM: at91/pm_slowclock: add runtime detection of memory contoller
ARM: at91/PMC: make register base soc independent
ARM: at91/rtc-at91sam9: each SoC can select the RTT device to use
ARM: at91:rtc/rtc-at91sam9: ioremap register bank
ARM: at91/rtc-at91sam9: pass the GPBR to use via resources
ARM: at91: finally drop at91_sys_read/write
ARM: at91: merge SRAM Memory banks thanks to mirroring
Atmel: move console default platform_device to serial driver
ARM: at91/board-dt: drop default console
ARM: at91/board-dt: move at91_initialize() to init_irq()
Nicolas Ferre (1):
ARM: at91/ST: remove not needed casts
arch/arm/mach-at91/at91rm9200.c | 8 +-
arch/arm/mach-at91/at91rm9200_devices.c | 14 +-
arch/arm/mach-at91/at91rm9200_time.c | 37 ++-
arch/arm/mach-at91/at91sam9260.c | 23 +-
arch/arm/mach-at91/at91sam9260_devices.c | 38 +++-
arch/arm/mach-at91/at91sam9261.c | 10 +-
arch/arm/mach-at91/at91sam9261_devices.c | 31 ++-
arch/arm/mach-at91/at91sam9263.c | 11 +-
arch/arm/mach-at91/at91sam9263_devices.c | 59 ++++-
arch/arm/mach-at91/at91sam9_alt_reset.S | 12 +-
arch/arm/mach-at91/at91sam9g45.c | 11 +-
arch/arm/mach-at91/at91sam9g45_devices.c | 31 ++-
arch/arm/mach-at91/at91sam9g45_reset.S | 12 +-
arch/arm/mach-at91/at91sam9rl.c | 10 +-
arch/arm/mach-at91/at91sam9rl_devices.c | 31 ++-
arch/arm/mach-at91/at91sam9x5.c | 5 +-
arch/arm/mach-at91/at91x40.c | 2 +-
arch/arm/mach-at91/at91x40_time.c | 28 ++-
arch/arm/mach-at91/board-cpu9krea.c | 5 +-
arch/arm/mach-at91/board-cpuat91.c | 1 +
arch/arm/mach-at91/board-dt.c | 16 +-
arch/arm/mach-at91/board-eco920.c | 5 +-
arch/arm/mach-at91/board-kb9202.c | 1 +
arch/arm/mach-at91/board-picotux200.c | 1 +
arch/arm/mach-at91/board-rm9200dk.c | 1 +
arch/arm/mach-at91/board-rm9200ek.c | 1 +
arch/arm/mach-at91/board-yl-9200.c | 3 +-
arch/arm/mach-at91/clock.c | 81 ++++---
arch/arm/mach-at91/generic.h | 10 +
arch/arm/mach-at91/include/mach/at91_matrix.h | 23 ++
arch/arm/mach-at91/include/mach/at91_pmc.h | 56 +++--
arch/arm/mach-at91/include/mach/at91_ramc.h | 32 +++
arch/arm/mach-at91/include/mach/at91_st.h | 32 ++-
arch/arm/mach-at91/include/mach/at91rm9200.h | 10 +-
arch/arm/mach-at91/include/mach/at91rm9200_mc.h | 58 +----
.../arm/mach-at91/include/mach/at91rm9200_sdramc.h | 63 +++++
arch/arm/mach-at91/include/mach/at91sam9260.h | 14 +-
.../mach-at91/include/mach/at91sam9260_matrix.h | 36 ++--
arch/arm/mach-at91/include/mach/at91sam9261.h | 10 +-
.../mach-at91/include/mach/at91sam9261_matrix.h | 18 +-
arch/arm/mach-at91/include/mach/at91sam9263.h | 12 +-
.../mach-at91/include/mach/at91sam9263_matrix.h | 74 +++---
arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h | 6 -
arch/arm/mach-at91/include/mach/at91sam9_sdramc.h | 6 -
arch/arm/mach-at91/include/mach/at91sam9g45.h | 12 +-
.../mach-at91/include/mach/at91sam9g45_matrix.h | 84 +++---
arch/arm/mach-at91/include/mach/at91sam9rl.h | 7 +-
.../arm/mach-at91/include/mach/at91sam9rl_matrix.h | 42 ++--
arch/arm/mach-at91/include/mach/at91sam9x5.h | 5 +-
arch/arm/mach-at91/include/mach/at91x40.h | 18 +-
arch/arm/mach-at91/include/mach/hardware.h | 3 +-
arch/arm/mach-at91/include/mach/io.h | 18 --
arch/arm/mach-at91/pm.c | 35 ++-
arch/arm/mach-at91/pm.h | 11 +-
arch/arm/mach-at91/pm_slowclock.S | 271 ++++++++++----------
arch/arm/mach-at91/setup.c | 9 +
arch/avr32/mach-at32ap/at32ap700x.c | 2 -
drivers/pcmcia/at91_cf.c | 5 +-
drivers/rtc/rtc-at91sam9.c | 98 +++-----
drivers/tty/serial/atmel_serial.c | 2 +
drivers/usb/gadget/at91_udc.c | 9 +-
drivers/usb/gadget/atmel_usba_udc.c | 6 +-
drivers/watchdog/at91rm9200_wdt.c | 8 +-
63 files changed, 910 insertions(+), 683 deletions(-)
create mode 100644 arch/arm/mach-at91/include/mach/at91_matrix.h
create mode 100644 arch/arm/mach-at91/include/mach/at91_ramc.h
create mode 100644 arch/arm/mach-at91/include/mach/at91rm9200_sdramc.h
next reply other threads:[~2012-02-22 9:39 UTC|newest]
Thread overview: 58+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-02-22 9:39 Nicolas Ferre [this message]
2012-02-22 9:39 ` [PATCH v2 01/19] ARM: at91: factorise duplicated at91sam9 idle Nicolas Ferre
2012-02-22 9:39 ` [PATCH v2 02/19] ARM: at91/at91x40: remove use of at91_sys_read/write Nicolas Ferre
2012-02-22 14:36 ` Arnd Bergmann
2012-02-22 16:26 ` Jean-Christophe PLAGNIOL-VILLARD
2012-02-22 22:22 ` Ryan Mallon
2012-02-23 3:25 ` Jean-Christophe PLAGNIOL-VILLARD
2012-02-23 3:59 ` Ryan Mallon
2012-02-23 6:01 ` Jean-Christophe PLAGNIOL-VILLARD
2012-02-23 9:23 ` Ryan Mallon
2012-02-22 9:39 ` [PATCH v2 03/19] ARM: at91: make matrix register base soc independent Nicolas Ferre
2012-02-22 22:17 ` Ryan Mallon
2012-02-23 3:26 ` Jean-Christophe PLAGNIOL-VILLARD
2012-02-22 9:39 ` [PATCH v2 04/19] ARM: at91: make ST (System Timer) " Nicolas Ferre
2012-02-22 22:24 ` Ryan Mallon
2012-02-22 9:39 ` [PATCH v2 05/19] ARM: at91/ST: remove not needed casts Nicolas Ferre
2012-02-22 22:24 ` Ryan Mallon
2012-02-22 9:39 ` [PATCH v2 06/19] ARM: at91/pm_slowclock: rename register to named define Nicolas Ferre
2012-02-22 9:50 ` Russell King - ARM Linux
2012-02-22 17:34 ` Jean-Christophe PLAGNIOL-VILLARD
2012-02-22 9:39 ` [PATCH v2 07/19] ARM: at91/pm_slowclock: function slow_clock() accepts parameters Nicolas Ferre
2012-02-22 9:52 ` Russell King - ARM Linux
2012-02-22 12:58 ` Jean-Christophe PLAGNIOL-VILLARD
2012-02-22 13:18 ` Russell King - ARM Linux
2012-02-22 13:57 ` Jean-Christophe PLAGNIOL-VILLARD
2012-02-22 9:39 ` [PATCH v2 08/19] ARM: at91: move at91rm9200 sdramc defines to at91rm9200_sdramc.h Nicolas Ferre
2012-02-22 9:39 ` [PATCH v2 09/19] ARM: at91: make sdram/ddr register base soc independent Nicolas Ferre
2012-02-22 22:33 ` Ryan Mallon
2012-02-23 8:56 ` Nicolas Ferre
2012-02-23 9:58 ` Nicolas Ferre
2012-02-23 10:51 ` Ryan Mallon
2012-02-23 13:47 ` Nicolas Ferre
2012-02-22 9:39 ` [PATCH v2 10/19] ARM: at91/pm_slowclock: add runtime detection of memory contoller Nicolas Ferre
2012-02-22 9:39 ` [PATCH v2 11/19] ARM: at91/PMC: make register base soc independent Nicolas Ferre
2012-02-22 22:50 ` Ryan Mallon
2012-02-23 8:38 ` Nicolas Ferre
2012-02-23 9:22 ` Ryan Mallon
2012-02-22 9:39 ` [PATCH v2 12/19] ARM: at91/rtc-at91sam9: each SoC can select the RTT device to use Nicolas Ferre
2012-02-22 14:50 ` Arnd Bergmann
2012-02-22 16:24 ` Jean-Christophe PLAGNIOL-VILLARD
2012-02-22 16:47 ` Arnd Bergmann
2012-02-22 17:07 ` Jean-Christophe PLAGNIOL-VILLARD
2012-02-22 17:25 ` Arnd Bergmann
2012-02-22 18:02 ` Jean-Christophe PLAGNIOL-VILLARD
2012-02-22 9:39 ` [PATCH v2 13/19] ARM: at91:rtc/rtc-at91sam9: ioremap register bank Nicolas Ferre
2012-02-22 9:39 ` [PATCH v2 14/19] ARM: at91/rtc-at91sam9: pass the GPBR to use via resources Nicolas Ferre
2012-02-22 9:39 ` [PATCH v2 15/19] ARM: at91: finally drop at91_sys_read/write Nicolas Ferre
2012-02-22 9:39 ` [PATCH v2 16/19] ARM: at91: merge SRAM Memory banks thanks to mirroring Nicolas Ferre
2012-02-22 23:13 ` Ryan Mallon
2012-02-23 3:28 ` Jean-Christophe PLAGNIOL-VILLARD
2012-02-22 9:39 ` [PATCH v2 17/19] Atmel: move console default platform_device to serial driver Nicolas Ferre
2012-02-22 9:39 ` [PATCH v2 18/19] ARM: at91/board-dt: drop default console Nicolas Ferre
2012-02-22 9:39 ` [PATCH v2 19/19] ARM: at91/board-dt: move at91_initialize() to init_irq() Nicolas Ferre
2012-02-22 9:48 ` Russell King - ARM Linux
2012-02-22 13:03 ` Jean-Christophe PLAGNIOL-VILLARD
2012-02-22 16:15 ` [PATCH 0/2] ARM: at91: two additional patches to cleanup series Nicolas Ferre
2012-02-22 16:15 ` [PATCH 1/2] ARM: at91: add at91sam9g25ek.dts in Makefile.boot Nicolas Ferre
2012-02-22 16:15 ` [PATCH 2/2] ARM: at91: properly sort dtb files " Nicolas Ferre
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1329903585-30738-1-git-send-email-nicolas.ferre@atmel.com \
--to=nicolas.ferre@atmel.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).