From mboxrd@z Thu Jan 1 00:00:00 1970 From: t-kristo@ti.com (Tero Kristo) Date: Wed, 22 Feb 2012 12:47:55 +0200 Subject: [PATCHv10 3/4] omap3: add common twl configurations for vdd1 and vdd2 In-Reply-To: <871upn4tzf.fsf@ti.com> References: <1329733568-26676-1-git-send-email-t-kristo@ti.com> <1329733568-26676-4-git-send-email-t-kristo@ti.com> <871upn4tzf.fsf@ti.com> Message-ID: <1329907675.4102.488.camel@sokoban> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Tue, 2012-02-21 at 16:00 -0800, Kevin Hilman wrote: > Tero Kristo writes: > > > VDD1 and VDD2 are the core voltage regulators on OMAP3. VDD1 is used > > to control MPU/IVA voltage, and VDD2 is used for CORE. These regulators > > are needed by DVFS. > > > > Voltage ranges for VDD1 and VDD2 are taken from twl4030/twl5030 data manuals: > > - SWCS019L : TWL4030 ES3.1 Data Manual rev L > > - SWCS030E : TWL5030 ES1.2 Data Manual rev E > > > > Signed-off-by: Tero Kristo > > Do you have a similar patch for OMAP4 support? It looks like OMAP4 support requires some changes to the twl-regulator / twl-core in addition to the twl-common.c. I have these available (just created them), should I post these out? Attached here for reference in case you need to test something quickly. -Tero -------------- next part -------------- A non-text attachment was scrubbed... Name: 0001-regulator-twl6030-add-support-for-vdd1-vdd2-and-vdd3.patch Type: text/x-patch Size: 4563 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: 0002-arm-omap4-add-common-twl-configurations-for-vdd1-vdd.patch Type: text/x-patch Size: 3691 bytes Desc: not available URL: