linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: shawn.guo@linaro.org (Shawn Guo)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/4] ASoC: imx: add an explicit Kconfig option for imx-ssi driver
Date: Thu, 23 Feb 2012 22:48:36 +0800	[thread overview]
Message-ID: <1330008519-3584-2-git-send-email-shawn.guo@linaro.org> (raw)
In-Reply-To: <1330008519-3584-1-git-send-email-shawn.guo@linaro.org>

Currently ASoC:imx uses menuconfig option SND_IMX_SOC selects imx-ssi
driver, and it works because all the machine driver covered by the
menuconfig need to build imx-ssi driver in.  However, it will not work
any more if we have a imx based machine driver going into the menuconfig
while working with fsl_ssi driver (sound/soc/fsl/fsl_ssi.c) rather than
imx-ssi one.

The patch adds an explicit Kconfig option SND_SOC_IMX_SSI for imx-ssi
driver, so that it can be selected independently from the menuconfig
option SND_IMX_SOC.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
 sound/soc/imx/Kconfig  |    7 +++++++
 sound/soc/imx/Makefile |    4 ++--
 2 files changed, 9 insertions(+), 2 deletions(-)

diff --git a/sound/soc/imx/Kconfig b/sound/soc/imx/Kconfig
index 863a6b4..b9de8a8 100644
--- a/sound/soc/imx/Kconfig
+++ b/sound/soc/imx/Kconfig
@@ -8,6 +8,9 @@ menuconfig SND_IMX_SOC
 
 if SND_IMX_SOC
 
+config SND_SOC_IMX_SSI
+	tristate
+
 config SND_SOC_IMX_PCM
 	tristate
 
@@ -25,6 +28,7 @@ config SND_MXC_SOC_WM1133_EV1
 	depends on MACH_MX31ADS_WM1133_EV1 && EXPERIMENTAL
 	select SND_SOC_WM8350
 	select SND_MXC_SOC_FIQ
+	select SND_SOC_IMX_SSI
 	help
 	  Enable support for audio on the i.MX31ADS with the WM1133-EV1
 	  PMIC board with WM8835x fitted.
@@ -34,6 +38,7 @@ config SND_SOC_MX27VIS_AIC32X4
 	depends on MACH_IMX27_VISSTRIM_M10 && I2C
 	select SND_SOC_TLV320AIC32X4
 	select SND_MXC_SOC_MX2
+	select SND_SOC_IMX_SSI
 	help
 	  Say Y if you want to add support for SoC audio on Visstrim SM10
 	  board with TLV320AIC32X4 codec.
@@ -44,6 +49,7 @@ config SND_SOC_PHYCORE_AC97
 	select SND_SOC_AC97_BUS
 	select SND_SOC_WM9712
 	select SND_MXC_SOC_FIQ
+	select SND_SOC_IMX_SSI
 	help
 	  Say Y if you want to add support for SoC audio on Phytec phyCORE
 	  and phyCARD boards in AC97 mode
@@ -57,6 +63,7 @@ config SND_SOC_EUKREA_TLV320
 	depends on I2C
 	select SND_SOC_TLV320AIC23
 	select SND_MXC_SOC_FIQ
+	select SND_SOC_IMX_SSI
 	help
 	  Enable I2S based access to the TLV320AIC23B codec attached
 	  to the SSI interface
diff --git a/sound/soc/imx/Makefile b/sound/soc/imx/Makefile
index 303bc05..981c9da 100644
--- a/sound/soc/imx/Makefile
+++ b/sound/soc/imx/Makefile
@@ -1,6 +1,6 @@
 # i.MX Platform Support
-snd-soc-imx-objs := imx-ssi.o
-obj-$(CONFIG_SND_IMX_SOC) += snd-soc-imx.o
+snd-soc-imx-ssi-objs := imx-ssi.o
+obj-$(CONFIG_SND_SOC_IMX_SSI) += snd-soc-imx-ssi.o
 
 obj-$(CONFIG_SND_SOC_IMX_PCM) += snd-soc-imx-pcm.o
 snd-soc-imx-pcm-y := imx-pcm.o
-- 
1.7.5.4

  reply	other threads:[~2012-02-23 14:48 UTC|newest]

Thread overview: 82+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-02-23  6:47 [PATCH 1/4] ASoC: imx: let SND_MXC_SOC_FIQ select FIQ Shawn Guo
2012-02-23  6:47 ` [PATCH 2/4] ASoC: imx: move SND_SOC_AC97_BUS selection down to machine driver Shawn Guo
2012-02-23  6:47 ` [PATCH 3/4] ASoC: imx: initialize dma_params burstsize just in imx-ssi Shawn Guo
2012-02-23  6:47 ` [PATCH 4/4] ASoC: imx: separate imx-pcm bits from imx-ssi driver Shawn Guo
2012-02-23 14:48 ` [PATCH 0/4] ASoC: merge imx into fsl Shawn Guo
2012-02-23 14:48   ` Shawn Guo [this message]
2012-02-23 15:40     ` [PATCH 1/4] ASoC: imx: add an explicit Kconfig option for imx-ssi driver Timur Tabi
2012-02-24  1:28       ` Shawn Guo
2012-02-24  2:59         ` Tabi Timur-B04825
2012-02-24  3:37           ` Shawn Guo
2012-02-23 14:48   ` [PATCH 2/4] ASoC: fsl: separate SSI and DMA Kconfig options Shawn Guo
2012-02-23 14:48   ` [PATCH 3/4] ASoC: imx: merge sound/soc/imx into sound/soc/fsl Shawn Guo
2012-02-23 14:48   ` [PATCH 4/4] ASoC: fsl: make fsl_ssi driver compilable on ARM/IMX Shawn Guo
2012-02-23 15:24     ` Sergei Shtylyov
2012-02-23 15:44       ` Timur Tabi
2012-02-23 16:52         ` Russell King - ARM Linux
2012-02-23 17:04           ` Timur Tabi
2012-02-23 17:14             ` Russell King - ARM Linux
2012-02-23 19:01               ` [alsa-devel] " Trent Piepho
2012-02-24 21:29               ` Timur Tabi
2012-02-24 21:54                 ` Russell King - ARM Linux
2012-02-24 22:00                   ` Timur Tabi
2012-02-24 22:35                     ` Russell King - ARM Linux
2012-02-24 23:05                       ` Timur Tabi
2012-02-24 23:15                         ` Russell King - ARM Linux
2012-02-24 23:22                           ` Timur Tabi
2012-02-24 23:28                             ` Russell King - ARM Linux
2012-02-24 23:38                               ` Timur Tabi
2012-02-24 14:09 ` [PATCH 0/6] ASoC: a few cleanups on sound/soc/fsl Shawn Guo
2012-02-24 14:02   ` Mark Brown
2012-02-24 14:23     ` Shawn Guo
2012-02-24 14:17       ` Mark Brown
2012-02-24 23:21         ` Shawn Guo
2012-02-24 23:14           ` Timur Tabi
2012-02-25  0:03             ` Shawn Guo
2012-02-25  1:39               ` Tabi Timur-B04825
2012-02-25 10:17                 ` Russell King - ARM Linux
2012-02-25 11:44                   ` Mark Brown
2012-02-25 12:12                     ` Russell King - ARM Linux
2012-02-25 13:58                       ` Mark Brown
2012-02-25 12:16                     ` Shawn Guo
2012-02-24 23:23           ` Russell King - ARM Linux
2012-02-25  0:06             ` Shawn Guo
2012-02-24 14:09   ` [PATCH 1/6] ASoC: fsl: correct get_dma_channel parameter name Shawn Guo
2012-02-27 20:27     ` Timur Tabi
2012-02-28 12:34     ` Mark Brown
2012-02-24 14:09   ` [PATCH 2/6] ASoC: fsl: align mpc8610_hpcd with p1022_ds on getting codec node Shawn Guo
2012-02-27 20:31     ` Timur Tabi
2012-02-28 12:35     ` Mark Brown
2012-02-24 14:09   ` [PATCH 3/6] ASoC: Remove unnecessary -codec from cs4270 driver name Shawn Guo
2012-02-27 21:21     ` Timur Tabi
2012-02-28 12:35     ` Mark Brown
2012-02-24 14:09   ` [PATCH 4/6] ASoC: fsl: create fsl_utils to accommodate the common functions Shawn Guo
2012-02-27 18:15     ` Timur Tabi
2012-02-27 21:36     ` Timur Tabi
2012-02-28  2:15       ` Shawn Guo
2012-02-28  2:15         ` Tabi Timur-B04825
2012-02-28 16:51     ` Timur Tabi
2012-02-24 14:09   ` [PATCH 5/6] ASoC: fsl: use platform_device_id table to match p1022_ds device Shawn Guo
2012-02-27 21:39     ` Timur Tabi
2012-02-27 21:39     ` Timur Tabi
2012-02-28  1:52       ` Shawn Guo
2012-02-24 14:09   ` [PATCH 6/6] ASoC: fsl: check property 'compatible' for the machine name Shawn Guo
2012-02-24 14:12     ` Mark Brown
2012-02-24 16:30       ` Timur Tabi
2012-02-25  0:09         ` Shawn Guo
2012-02-25 11:39         ` Mark Brown
2012-02-25  1:28       ` Shawn Guo
2012-02-25 11:42         ` Mark Brown
2012-02-25 13:09           ` Shawn Guo
2012-02-25 13:27             ` Mark Brown
2012-02-25 14:03               ` Tabi Timur-B04825
2012-02-24 16:32     ` Timur Tabi
2012-02-24 23:23       ` Shawn Guo
2012-02-24 23:22         ` Timur Tabi
2012-02-27 21:54     ` Timur Tabi
2012-02-28  1:50       ` Shawn Guo
2012-02-28  2:12         ` Tabi Timur-B04825
2012-02-28  3:13           ` Shawn Guo
2012-02-28  3:42             ` Tabi Timur-B04825
2012-02-28  5:35               ` Shawn Guo
2012-02-27 20:28   ` [PATCH 0/6] ASoC: a few cleanups on sound/soc/fsl Timur Tabi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1330008519-3584-2-git-send-email-shawn.guo@linaro.org \
    --to=shawn.guo@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).