[PATCH v5 9/9] ARM: at91: Consolidate cpuidle functionality

[rob.lee@linaro.org (Robert Lee)]

Use newly added core cpuidle functionality and remove this duplicated
code from the platform cpuidle.

Signed-off-by: Robert Lee <rob.lee@linaro.org>
---
 arch/arm/mach-at91/cpuidle.c |   64 ++++++++++++++---------------------------
 1 files changed, 22 insertions(+), 42 deletions(-)

diff --git a/arch/arm/mach-at91/cpuidle.c b/arch/arm/mach-at91/cpuidle.c
index a851e6c..10c1564 100644
--- a/arch/arm/mach-at91/cpuidle.c
+++ b/arch/arm/mach-at91/cpuidle.c
@@ -27,66 +27,46 @@
 
 static DEFINE_PER_CPU(struct cpuidle_device, at91_cpuidle_device);
 
-static struct cpuidle_driver at91_idle_driver = {
-	.name =         "at91_idle",
-	.owner =        THIS_MODULE,
-};
-
 /* Actual code that puts the SoC in different idle states */
 static int at91_enter_idle(struct cpuidle_device *dev,
 			struct cpuidle_driver *drv,
 			       int index)
 {
-	struct timeval before, after;
-	int idle_time;
 	u32 saved_lpr;
 
-	local_irq_disable();
-	do_gettimeofday(&before);
-	if (index == 0)
-		/* Wait for interrupt state */
-		cpu_do_idle();
-	else if (index == 1) {
-		asm("b 1f; .align 5; 1:");
-		asm("mcr p15, 0, r0, c7, c10, 4");	/* drain write buffer */
-		saved_lpr = sdram_selfrefresh_enable();
-		cpu_do_idle();
-		sdram_selfrefresh_disable(saved_lpr);
-	}
-	do_gettimeofday(&after);
-	local_irq_enable();
-	idle_time = (after.tv_sec - before.tv_sec) * USEC_PER_SEC +
-			(after.tv_usec - before.tv_usec);
+	__asm__("b 1f; .align 5; 1:\n"
+	"	mcr p15, 0, r0, c7, c10, 4");	/* drain write buffer */
+
+	saved_lpr = sdram_selfrefresh_enable();
+	cpu_do_idle();
+	sdram_selfrefresh_disable(saved_lpr);
 
-	dev->last_residency = idle_time;
 	return index;
 }
 
+static struct cpuidle_driver at91_idle_driver = {
+	.name			= "at91_idle",
+	.owner			= THIS_MODULE,
+	.en_core_tk_irqen	= 1,
+	.states[0] = CPUIDLE_ARM_WFI_STATE,
+	.states[1] = {
+		.enter			= at91_enter_idle,
+		.exit_latency		= 10,
+		.target_residency	= 100000,
+		.flags			= CPUIDLE_FLAG_TIME_VALID,
+		.name			= "RAM_SR",
+		.desc			= "WFI and DDR Self Refresh",
+	},
+	.state_count = AT91_MAX_STATES,
+};
+
 /* Initialize CPU idle by registering the idle states */
 static int at91_init_cpuidle(void)
 {
 	struct cpuidle_device *device;
-	struct cpuidle_driver *driver = &at91_idle_driver;
 
 	device = &per_cpu(at91_cpuidle_device, smp_processor_id());
 	device->state_count = AT91_MAX_STATES;
-	driver->state_count = AT91_MAX_STATES;
-
-	/* Wait for interrupt state */
-	driver->states[0].enter = at91_enter_idle;
-	driver->states[0].exit_latency = 1;
-	driver->states[0].target_residency = 10000;
-	driver->states[0].flags = CPUIDLE_FLAG_TIME_VALID;
-	strcpy(driver->states[0].name, "WFI");
-	strcpy(driver->states[0].desc, "Wait for interrupt");
-
-	/* Wait for interrupt and RAM self refresh state */
-	driver->states[1].enter = at91_enter_idle;
-	driver->states[1].exit_latency = 10;
-	driver->states[1].target_residency = 10000;
-	driver->states[1].flags = CPUIDLE_FLAG_TIME_VALID;
-	strcpy(driver->states[1].name, "RAM_SR");
-	strcpy(driver->states[1].desc, "WFI and RAM Self Refresh");
 
 	cpuidle_register_driver(&at91_idle_driver);
 
-- 
1.7.1