[PATCH v2 5/5] arm/dts: omap4-sdp: Add ks8851 ethernet SPI device

[b-cousson@ti.com (Benoit Cousson)]

Add an ethernet SPI chip in the OMAP4 SDP/Blaze board DTS file.

Add a fixed regulator node controlled by a GPIO line to supply
the ethernet chip.

Based on original code from Rajendra.

Signed-off-by: Benoit Cousson <b-cousson@ti.com>
Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Acked-by: Rob Herring <rob.herring@calxeda.com>
---
 arch/arm/boot/dts/omap4-sdp.dts |   30 +++++++++++++++++++++---------
 1 files changed, 21 insertions(+), 9 deletions(-)

diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
index 066e28c..6584109 100644
--- a/arch/arm/boot/dts/omap4-sdp.dts
+++ b/arch/arm/boot/dts/omap4-sdp.dts
@@ -13,17 +13,29 @@
 	model = "TI OMAP4 SDP board";
 	compatible = "ti,omap4-sdp", "ti,omap4430", "ti,omap4";
 
-	/*
-	 * Since the initial device tree board file does not create any
-	 * devices (MMC, network...), the only way to boot is to provide a
-	 * ramdisk.
-	 */
-	chosen {
-		bootargs = "root=/dev/ram0 rw console=ttyO2,115200n8 initrd=0x81600000,20M ramdisk_size=20480 no_console_suspend debug";
-	};
-
 	memory {
 		device_type = "memory";
 		reg = <0x80000000 0x40000000>; /* 1 GB */
 	};
+
+	vdd_eth: fixedregulator at 0 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_ETH";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 16 0>;  /* gpio line 48 */
+		enable-active-high;
+		regulator-boot-on;
+	};
+};
+
+&mcspi1 {
+	eth at 0 {
+		compatible = "ks8851";
+		spi-max-frequency = <24000000>;
+		reg = <0>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <2>; /* gpio line 34 */
+		vdd-supply = <&vdd_eth>;
+	};
 };
-- 
1.7.0.4