From: b-cousson@ti.com (Benoit Cousson)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 05/12] mfd: twl4030-irq: Make SIH SPARSE_IRQ capable
Date: Fri, 2 Mar 2012 17:50:17 +0100 [thread overview]
Message-ID: <1330707024-23730-6-git-send-email-b-cousson@ti.com> (raw)
In-Reply-To: <1330707024-23730-1-git-send-email-b-cousson@ti.com>
twl4030 is using a two level irq controllers infrastruture.
So far, only the first level was using dynamic irq_desc allocation
to be able to have irq_domain support for device tree.
There is a need to allocate separate irq_descs for the SIH too to
avoid hacking the first level with interrupts from the second level.
Add an irq_base parameter to allow the caller to provide the base from
pdata or from dynamic allocation.
Affect TWL4030_NR_IRQS to the twl-core IRQs only.
Moreover that will allow the extraction of the of_node pointer for further
Device Tree conversion.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Benoit Cousson <b-cousson@ti.com>
---
drivers/gpio/gpio-twl4030.c | 3 ++-
drivers/mfd/twl4030-irq.c | 23 ++++++-----------------
include/linux/i2c/twl.h | 2 +-
3 files changed, 9 insertions(+), 19 deletions(-)
diff --git a/drivers/gpio/gpio-twl4030.c b/drivers/gpio/gpio-twl4030.c
index b8b4f22..697396c 100644
--- a/drivers/gpio/gpio-twl4030.c
+++ b/drivers/gpio/gpio-twl4030.c
@@ -404,7 +404,8 @@ static int __devinit gpio_twl4030_probe(struct platform_device *pdev)
"can't dispatch IRQs from modules\n");
goto no_irqs;
}
- ret = twl4030_sih_setup(TWL4030_MODULE_GPIO);
+ ret = twl4030_sih_setup(&pdev->dev, TWL4030_MODULE_GPIO,
+ pdata->irq_base);
if (ret < 0)
return ret;
WARN_ON(ret != pdata->irq_base);
diff --git a/drivers/mfd/twl4030-irq.c b/drivers/mfd/twl4030-irq.c
index 3b34531..faf3318 100644
--- a/drivers/mfd/twl4030-irq.c
+++ b/drivers/mfd/twl4030-irq.c
@@ -625,30 +625,23 @@ static irqreturn_t handle_twl4030_sih(int irq, void *data)
return IRQ_HANDLED;
}
-static unsigned twl4030_irq_next;
-
/* returns the first IRQ used by this SIH bank,
* or negative errno
*/
-int twl4030_sih_setup(int module)
+int twl4030_sih_setup(struct device *dev, int module, int irq_base)
{
int sih_mod;
const struct sih *sih = NULL;
struct sih_agent *agent;
int i, irq;
int status = -EINVAL;
- unsigned irq_base = twl4030_irq_next;
/* only support modules with standard clear-on-read for now */
for (sih_mod = 0, sih = sih_modules;
sih_mod < nr_sih_modules;
sih_mod++, sih++) {
if (sih->module == module && sih->set_cor) {
- if (!WARN((irq_base + sih->bits) > NR_IRQS,
- "irq %d for %s too big\n",
- irq_base + sih->bits,
- sih->name))
- status = 0;
+ status = 0;
break;
}
}
@@ -659,8 +652,6 @@ int twl4030_sih_setup(int module)
if (!agent)
return -ENOMEM;
- status = 0;
-
agent->irq_base = irq_base;
agent->sih = sih;
agent->imr = ~0;
@@ -676,8 +667,6 @@ int twl4030_sih_setup(int module)
activate_irq(irq);
}
- twl4030_irq_next += i;
-
/* replace generic PIH handler (handle_simple_irq) */
irq = sih_mod + twl4030_irq_base;
irq_set_handler_data(irq, agent);
@@ -686,7 +675,7 @@ int twl4030_sih_setup(int module)
agent->irq_name ?: sih->name, NULL);
pr_info("twl4030: %s (irq %d) chaining IRQs %d..%d\n", sih->name,
- irq, irq_base, twl4030_irq_next - 1);
+ irq, irq_base, irq_base + i - 1);
return status < 0 ? status : irq_base;
}
@@ -750,12 +739,12 @@ int twl4030_init_irq(struct device *dev, int irq_num)
irq_set_nested_thread(i, 1);
activate_irq(i);
}
- twl4030_irq_next = i;
+
pr_info("twl4030: %s (irq %d) chaining IRQs %d..%d\n", "PIH",
- irq_num, irq_base, twl4030_irq_next - 1);
+ irq_num, irq_base, irq_end);
/* ... and the PWR_INT module ... */
- status = twl4030_sih_setup(TWL4030_MODULE_INT);
+ status = twl4030_sih_setup(dev, TWL4030_MODULE_INT, irq_end);
if (status < 0) {
pr_err("twl4030: sih_setup PWR INT --> %d\n", status);
goto fail;
diff --git a/include/linux/i2c/twl.h b/include/linux/i2c/twl.h
index 78d3465..8b9904a 100644
--- a/include/linux/i2c/twl.h
+++ b/include/linux/i2c/twl.h
@@ -751,7 +751,7 @@ struct twl4030_platform_data {
/*----------------------------------------------------------------------*/
-int twl4030_sih_setup(int module);
+int twl4030_sih_setup(struct device *dev, int module, int irq_base);
/* Offsets to Power Registers */
#define TWL4030_VDAC_DEV_GRP 0x3B
--
1.7.0.4
next prev parent reply other threads:[~2012-03-02 16:50 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-03-02 16:50 [PATCH 00/12] mfd: twl: Fix for irqdomain/next + SPARSE_IRQ + MMC card detect Benoit Cousson
2012-03-02 16:50 ` [PATCH 01/12] mfd: twl-core: don't depend on pdata->irq_base/end Benoit Cousson
2012-03-14 20:59 ` Kevin Hilman
2012-03-14 21:08 ` Cousson, Benoit
2012-03-14 21:17 ` Kevin Hilman
2012-03-14 21:53 ` Kevin Hilman
2012-03-19 14:23 ` Cousson, Benoit
2012-03-14 22:14 ` Tony Lindgren
2012-03-19 15:07 ` Felipe Balbi
2012-03-02 16:50 ` [PATCH 02/12] mfd: twl-core: remove unneeded header Benoit Cousson
2012-03-02 16:50 ` [PATCH 03/12] mfd: twl-core: Remove references already defined in header file Benoit Cousson
2012-03-02 16:50 ` [PATCH 04/12] mfd: twl-core: Move IRQ allocation into twl[4030|6030]-irq files Benoit Cousson
2012-03-02 16:50 ` Benoit Cousson [this message]
2012-03-02 16:50 ` [PATCH 06/12] mfd: twl4030-irq: micro-optimization on IRQ handler Benoit Cousson
2012-03-02 16:50 ` [PATCH 07/12] mfd: twl-*: Change from pr_XXX to dev_XXX macros and various cleanups Benoit Cousson
2012-03-02 16:50 ` [PATCH 08/12] gpio/twl: Allocate irq_desc dynamically for SPARSE_IRQ support Benoit Cousson
2012-03-07 12:57 ` Cousson, Benoit
2012-03-09 16:39 ` Cousson, Benoit
2012-03-12 17:46 ` Grant Likely
2012-03-02 16:50 ` [PATCH 09/12] gpio/twl: Add DT support to gpio-twl4030 driver Benoit Cousson
2012-03-12 17:48 ` Grant Likely
2012-03-02 16:50 ` [PATCH 10/12] arm/dts: twl4030: Add twl4030-gpio node Benoit Cousson
2012-03-02 16:50 ` [PATCH 11/12] mfd: twl4030-irq: Return twl6030_mmc_card_detect IRQ for board setup Benoit Cousson
2012-03-02 18:15 ` Felipe Balbi
2012-03-02 19:20 ` Tony Lindgren
2012-03-02 20:28 ` Cousson, Benoit
2012-03-02 21:38 ` Cousson, Benoit
2012-03-02 21:44 ` Tony Lindgren
2012-03-05 8:19 ` Rajendra Nayak
2012-03-05 8:58 ` Cousson, Benoit
2012-03-03 15:09 ` Sergei Shtylyov
2012-03-05 8:29 ` Cousson, Benoit
2012-03-02 16:50 ` [PATCH 12/12] ARM: OMAP2+: board-omap4-*: Do not use anymore TWL6030_IRQ_BASE in board files Benoit Cousson
2012-03-13 17:07 ` Tony Lindgren
2012-03-13 21:35 ` Cousson, Benoit
2012-03-02 20:33 ` [PATCH 07/12] mfd: twl-*: Replace pr_ macros by the dev_ equivalent and do various cleanups Benoit Cousson
2012-03-02 20:49 ` Cousson, Benoit
2012-03-14 20:50 ` [PATCH 00/12] mfd: twl: Fix for irqdomain/next + SPARSE_IRQ + MMC card detect Kevin Hilman
2012-03-14 21:01 ` Cousson, Benoit
2012-03-14 21:24 ` Kevin Hilman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1330707024-23730-6-git-send-email-b-cousson@ti.com \
--to=b-cousson@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).