From mboxrd@z Thu Jan 1 00:00:00 1970 From: alan@signal11.us (Alan Ott) Date: Fri, 2 Mar 2012 15:58:28 -0500 Subject: [PATCH v2 2/6] ARM: tegra: select CPU_FREQ_TABLE Message-ID: <1330721908-8633-1-git-send-email-alan@signal11.us> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org From: Arnd Bergmann The tegra cpufreq implementation relies on the cpu_freq_table code, so make sure that this is always there when needed. Signed-off-by: Arnd Bergmann Signed-off-by: Alan Ott --- arch/arm/mach-tegra/Kconfig | 2 ++ 1 files changed, 2 insertions(+), 0 deletions(-) diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig index 373652d..60f3e4b 100644 --- a/arch/arm/mach-tegra/Kconfig +++ b/arch/arm/mach-tegra/Kconfig @@ -10,6 +10,7 @@ config ARCH_TEGRA_2x_SOC select USB_ARCH_HAS_EHCI if USB_SUPPORT select USB_ULPI if USB_SUPPORT select USB_ULPI_VIEWPORT if USB_SUPPORT + select CPU_FREQ_TABLE if CPU_FREQ help Support for NVIDIA Tegra AP20 and T20 processors, based on the ARM CortexA9MP CPU and the ARM PL310 L2 cache controller @@ -23,6 +24,7 @@ config ARCH_TEGRA_3x_SOC select USB_ULPI if USB_SUPPORT select USB_ULPI_VIEWPORT if USB_SUPPORT select USE_OF + select CPU_FREQ_TABLE if CPU_FREQ help Support for NVIDIA Tegra T30 processor family, based on the ARM CortexA9MP CPU and the ARM PL310 L2 cache controller -- 1.7.0.4