[PATCH 17/20] ASoC: fsl: let fsl_ssi work with imx pcm and machine drivers

[shawn.guo@linaro.org (Shawn Guo)]

Makes necessary changes on fsl_ssi to let it work with imx pcm and
machine drivers.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
 sound/soc/fsl/fsl_ssi.c |   51 +++++++++++++++++++++++++++++++++++++++++++++++
 1 files changed, 51 insertions(+), 0 deletions(-)

diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c
index 9846091..270fc81 100644
--- a/sound/soc/fsl/fsl_ssi.c
+++ b/sound/soc/fsl/fsl_ssi.c
@@ -28,6 +28,7 @@
 #include <sound/soc.h>
 
 #include "fsl_ssi.h"
+#include "imx-pcm.h"
 
 #ifdef PPC
 #define read_ssi(addr)		in_be32(addr)
@@ -105,6 +106,10 @@ struct fsl_ssi_private {
 	struct device_attribute dev_attr;
 	struct platform_device *pdev;
 
+	int ssi_on_imx;
+	struct imx_pcm_dma_params dma_params_tx;
+	struct imx_pcm_dma_params dma_params_rx;
+
 	struct {
 		unsigned int rfrc;
 		unsigned int tfrc;
@@ -406,6 +411,12 @@ static int fsl_ssi_startup(struct snd_pcm_substream *substream,
 		ssi_private->second_stream = substream;
 	}
 
+	if (ssi_private->ssi_on_imx)
+		snd_soc_dai_set_dma_data(dai, substream,
+			(substream->stream == SNDRV_PCM_STREAM_PLAYBACK) ?
+				&ssi_private->dma_params_tx :
+				&ssi_private->dma_params_rx);
+
 	return 0;
 }
 
@@ -711,6 +722,38 @@ static int __devinit fsl_ssi_probe(struct platform_device *pdev)
                 /* Older 8610 DTs didn't have the fifo-depth property */
 		ssi_private->fifo_depth = 8;
 
+	if (of_device_is_compatible(pdev->dev.of_node, "fsl,imx1-ssi")) {
+		u32 dma_events[2];
+		ssi_private->ssi_on_imx = 1;
+		/*
+		 * FIXME: The dma burst size must equal to ssi watermark
+		 * setting on imx.  We have burstsize be "fifo_depth - 2"
+		 * here because "fifo_depth - 2" rather than fifo_depth is
+		 * being written into watermark register in fsl_ssi_startup().
+		 * Is this something needs to be fixed for PowerPC?
+		 */
+		ssi_private->dma_params_tx.burstsize =
+			ssi_private->fifo_depth - 2;
+		ssi_private->dma_params_rx.burstsize =
+			ssi_private->fifo_depth - 2;
+		ssi_private->dma_params_tx.dma_addr =
+			ssi_private->ssi_phys + offsetof(struct ccsr_ssi, stx0);
+		ssi_private->dma_params_rx.dma_addr =
+			ssi_private->ssi_phys + offsetof(struct ccsr_ssi, srx0);
+		/*
+		 * TODO: This is a temporary solution and should be changed
+		 * to use generic DMA binding later when the helplers get in.
+		 */
+		ret = of_property_read_u32_array(pdev->dev.of_node,
+					"fsl,ssi-dma-events", dma_events, 2);
+		if (ret) {
+			dev_err(&pdev->dev, "could not get dma events\n");
+			goto error_irq;
+		}
+		ssi_private->dma_params_tx.dma = dma_events[0];
+		ssi_private->dma_params_rx.dma = dma_events[1];
+	}
+
 	/* Initialize the the device_attribute structure */
 	dev_attr = &ssi_private->dev_attr;
 	sysfs_attr_init(&dev_attr->attr);
@@ -734,6 +777,13 @@ static int __devinit fsl_ssi_probe(struct platform_device *pdev)
 		goto error_dev;
 	}
 
+	/*
+	 * All imx machine drivers use new binding which does not require
+	 * SSI driver to trigger machine driver's probe.
+	 */
+	if (ssi_private->ssi_on_imx)
+		return 0;
+
 	/* Trigger the machine driver's probe function.  The platform driver
 	 * name of the machine driver is taken from /compatible property of the
 	 * device tree.  We also pass the address of the CPU DAI driver
@@ -798,6 +848,7 @@ static int fsl_ssi_remove(struct platform_device *pdev)
 
 static const struct of_device_id fsl_ssi_ids[] = {
 	{ .compatible = "fsl,mpc8610-ssi", },
+	{ .compatible = "fsl,imx1-ssi", },
 	{}
 };
 MODULE_DEVICE_TABLE(of, fsl_ssi_ids);
-- 
1.7.5.4