From: shawn.guo@linaro.org (Shawn Guo)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 04/20] ARM: imx: convert audmux to a platform driver
Date: Sat, 3 Mar 2012 23:19:45 +0800 [thread overview]
Message-ID: <1330788001-10158-5-git-send-email-shawn.guo@linaro.org> (raw)
In-Reply-To: <1330788001-10158-1-git-send-email-shawn.guo@linaro.org>
From: Richard Zhao <richard.zhao@linaro.org>
It coverts audmux to a platform driver, so that it can be moved into
sound/soc/imx and adopt device tree support later.
Signed-off-by: Richard Zhao <richard.zhao@linaro.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
arch/arm/mach-imx/eukrea_mbimx27-baseboard.c | 7 ++
arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c | 7 ++
arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c | 7 ++
arch/arm/mach-imx/mach-imx27_visstrim_m10.c | 7 ++
arch/arm/mach-imx/mach-mx31ads.c | 6 +
arch/arm/mach-imx/mach-pca100.c | 7 ++
arch/arm/mach-imx/mach-pcm043.c | 7 ++
arch/arm/plat-mxc/audmux.c | 127 +++++++++++++++++-------
8 files changed, 140 insertions(+), 35 deletions(-)
diff --git a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
index 5f2f91d..11cd0a0 100644
--- a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
+++ b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
@@ -294,6 +294,10 @@ struct imx_ssi_platform_data eukrea_mbimx27_ssi_pdata __initconst = {
.flags = IMX_SSI_DMA | IMX_SSI_USE_I2S_SLAVE,
};
+static const struct resource audmux_res[] __initconst = {
+ DEFINE_RES_MEM(MX27_AUDMUX_BASE_ADDR, SZ_4K),
+};
+
/*
* system init for baseboard usage. Will be called by cpuimx27 init.
*
@@ -317,6 +321,9 @@ void __init eukrea_mbimx27_baseboard_init(void)
i2c_register_board_info(0, eukrea_mbimx27_i2c_devices,
ARRAY_SIZE(eukrea_mbimx27_i2c_devices));
+ /* imx27 has the imx21 version audmux */
+ imx_add_platform_device("imx21-audmux", 0, audmux_res,
+ ARRAY_SIZE(audmux_res), NULL, 0);
imx27_add_imx_ssi(0, &eukrea_mbimx27_ssi_pdata);
#if defined(CONFIG_TOUCHSCREEN_ADS7846) \
diff --git a/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c b/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c
index 2cf603e..2797da8 100644
--- a/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c
+++ b/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c
@@ -222,6 +222,10 @@ struct imx_ssi_platform_data eukrea_mbimxsd_ssi_pdata __initconst = {
.flags = IMX_SSI_SYN | IMX_SSI_NET | IMX_SSI_USE_I2S_SLAVE,
};
+static const struct resource audmux_res[] __initconst = {
+ DEFINE_RES_MEM(MX25_AUDMUX_BASE_ADDR, SZ_16K),
+};
+
static struct esdhc_platform_data sd1_pdata = {
.cd_gpio = GPIO_SD1CD,
.cd_type = ESDHC_CD_GPIO,
@@ -242,6 +246,9 @@ void __init eukrea_mbimxsd25_baseboard_init(void)
imx25_add_imx_uart1(&uart_pdata);
imx25_add_imx_fb(&eukrea_mximxsd_fb_pdata);
+ /* imx25 has the imx31 version audmux */
+ imx_add_platform_device("imx31-audmux", 0, audmux_res,
+ ARRAY_SIZE(audmux_res), NULL, 0);
imx25_add_imx_ssi(0, &eukrea_mbimxsd_ssi_pdata);
imx25_add_flexcan1(NULL);
diff --git a/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c b/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c
index fd8bf8a..1878114 100644
--- a/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c
+++ b/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c
@@ -233,6 +233,10 @@ struct imx_ssi_platform_data eukrea_mbimxsd_ssi_pdata __initconst = {
.flags = IMX_SSI_SYN | IMX_SSI_NET | IMX_SSI_USE_I2S_SLAVE,
};
+static const struct resource audmux_res[] __initconst = {
+ DEFINE_RES_MEM(MX35_AUDMUX_BASE_ADDR, SZ_16K),
+};
+
static struct esdhc_platform_data sd1_pdata = {
.cd_gpio = GPIO_SD1CD,
.cd_type = ESDHC_CD_GPIO,
@@ -255,6 +259,9 @@ void __init eukrea_mbimxsd35_baseboard_init(void)
imx35_add_ipu_core(&mx3_ipu_data);
imx35_add_mx3_sdc_fb(&mx3fb_pdata);
+ /* imx35 has the imx31 version audmux */
+ imx_add_platform_device("imx31-audmux", 0, audmux_res,
+ ARRAY_SIZE(audmux_res), NULL, 0);
imx35_add_imx_ssi(0, &eukrea_mbimxsd_ssi_pdata);
imx35_add_flexcan1(NULL);
diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
index c2766ae..8f03235 100644
--- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
+++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
@@ -240,6 +240,10 @@ static const struct imx_ssi_platform_data visstrim_m10_ssi_pdata __initconst = {
.flags = IMX_SSI_DMA | IMX_SSI_SYN,
};
+static const struct resource audmux_res[] __initconst = {
+ DEFINE_RES_MEM(MX27_AUDMUX_BASE_ADDR, SZ_4K),
+};
+
static void __init visstrim_m10_board_init(void)
{
int ret;
@@ -251,6 +255,9 @@ static void __init visstrim_m10_board_init(void)
if (ret)
pr_err("Failed to setup pins (%d)\n", ret);
+ /* imx27 has the imx21 version audmux */
+ imx_add_platform_device("imx21-audmux", 0, audmux_res,
+ ARRAY_SIZE(audmux_res), NULL, 0);
imx27_add_imx_ssi(0, &visstrim_m10_ssi_pdata);
imx27_add_imx_uart0(&uart_pdata);
diff --git a/arch/arm/mach-imx/mach-mx31ads.c b/arch/arm/mach-imx/mach-mx31ads.c
index 4917aab..f84bd46 100644
--- a/arch/arm/mach-imx/mach-mx31ads.c
+++ b/arch/arm/mach-imx/mach-mx31ads.c
@@ -486,8 +486,14 @@ static unsigned int ssi_pins[] = {
MX31_PIN_STXD5__STXD5,
};
+static const struct resource audmux_res[] __initconst = {
+ DEFINE_RES_MEM(MX31_AUDMUX_BASE_ADDR, SZ_16K),
+};
+
static void __init mxc_init_audio(void)
{
+ imx_add_platform_device("imx31-audmux", 0, audmux_res,
+ ARRAY_SIZE(audmux_res), NULL, 0);
imx31_add_imx_ssi(0, NULL);
mxc_iomux_setup_multiple_pins(ssi_pins, ARRAY_SIZE(ssi_pins), "ssi");
}
diff --git a/arch/arm/mach-imx/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c
index 541152e..8a491b3 100644
--- a/arch/arm/mach-imx/mach-pca100.c
+++ b/arch/arm/mach-imx/mach-pca100.c
@@ -240,6 +240,10 @@ static const struct imx_ssi_platform_data pca100_ssi_pdata __initconst = {
.flags = IMX_SSI_USE_AC97,
};
+static const struct resource audmux_res[] __initconst = {
+ DEFINE_RES_MEM(MX27_AUDMUX_BASE_ADDR, SZ_4K),
+};
+
static int pca100_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
void *data)
{
@@ -363,6 +367,9 @@ static void __init pca100_init(void)
if (ret)
printk(KERN_ERR "pca100: Failed to setup pins (%d)\n", ret);
+ /* imx27 has the imx21 version audmux */
+ imx_add_platform_device("imx21-audmux", 0, audmux_res,
+ ARRAY_SIZE(audmux_res), NULL, 0);
imx27_add_imx_ssi(0, &pca100_ssi_pdata);
imx27_add_imx_uart0(&uart_pdata);
diff --git a/arch/arm/mach-imx/mach-pcm043.c b/arch/arm/mach-imx/mach-pcm043.c
index 237474f..7d6a1e0 100644
--- a/arch/arm/mach-imx/mach-pcm043.c
+++ b/arch/arm/mach-imx/mach-pcm043.c
@@ -298,6 +298,10 @@ static const struct imx_ssi_platform_data pcm043_ssi_pdata __initconst = {
.flags = IMX_SSI_USE_AC97,
};
+static const struct resource audmux_res[] __initconst = {
+ DEFINE_RES_MEM(MX35_AUDMUX_BASE_ADDR, SZ_16K),
+};
+
static const struct mxc_nand_platform_data
pcm037_nand_board_info __initconst = {
.width = 1,
@@ -367,6 +371,9 @@ static void __init pcm043_init(void)
imx35_add_imx_uart0(&uart_pdata);
imx35_add_mxc_nand(&pcm037_nand_board_info);
+ /* imx35 has the imx31 version audmux */
+ imx_add_platform_device("imx31-audmux", 0, audmux_res,
+ ARRAY_SIZE(audmux_res), NULL, 0);
imx35_add_imx_ssi(0, &pcm043_ssi_pdata);
imx35_add_imx_uart1(&uart_pdata);
diff --git a/arch/arm/plat-mxc/audmux.c b/arch/arm/plat-mxc/audmux.c
index f6dc536..98f5656 100644
--- a/arch/arm/plat-mxc/audmux.c
+++ b/arch/arm/plat-mxc/audmux.c
@@ -1,4 +1,6 @@
/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2012 Linaro Ltd.
* Copyright 2009 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
*
* Initial development of this code was funded by
@@ -15,14 +17,16 @@
* GNU General Public License for more details.
*/
-#include <linux/module.h>
-#include <linux/err.h>
-#include <linux/io.h>
#include <linux/clk.h>
#include <linux/debugfs.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
#include <linux/slab.h>
#include <mach/audmux.h>
-#include <mach/hardware.h>
+
+#define DRIVER_NAME "imx-audmux"
static struct clk *audmux_clk;
static void __iomem *audmux_base;
@@ -140,7 +144,7 @@ static const struct file_operations audmux_debugfs_fops = {
.llseek = default_llseek,
};
-static void audmux_debugfs_init(void)
+static void __init audmux_debugfs_init(void)
{
int i;
char buf[20];
@@ -159,18 +163,48 @@ static void audmux_debugfs_init(void)
i);
}
}
+
+static void __exit audmux_debugfs_remove(void)
+{
+ debugfs_remove_recursive(audmux_debugfs_root);
+}
#else
static inline void audmux_debugfs_init(void)
{
}
+
+static inline void audmux_debugfs_remove(void)
+{
+}
#endif
+enum imx_audmux_type {
+ IMX21_AUDMUX,
+ IMX31_AUDMUX,
+} audmux_type;
+
+static struct platform_device_id imx_audmux_ids[] = {
+ {
+ .name = "imx21-audmux",
+ .driver_data = IMX21_AUDMUX,
+ }, {
+ .name = "imx31-audmux",
+ .driver_data = IMX31_AUDMUX,
+ }, {
+ /* sentinel */
+ }
+};
+MODULE_DEVICE_TABLE(platform, imx_audmux_ids);
+
static unsigned char port_mapping[] = {
0x0, 0x4, 0x8, 0x10, 0x14, 0x1c,
};
int mxc_audmux_v1_configure_port(unsigned int port, unsigned int pcr)
{
+ if (audmux_type != IMX21_AUDMUX)
+ return -EINVAL;
+
if (!audmux_base)
return -ENOSYS;
@@ -186,6 +220,9 @@ EXPORT_SYMBOL_GPL(mxc_audmux_v1_configure_port);
int mxc_audmux_v2_configure_port(unsigned int port, unsigned int ptcr,
unsigned int pdcr)
{
+ if (audmux_type != IMX31_AUDMUX)
+ return -EINVAL;
+
if (!audmux_base)
return -ENOSYS;
@@ -202,41 +239,61 @@ int mxc_audmux_v2_configure_port(unsigned int port, unsigned int ptcr,
}
EXPORT_SYMBOL_GPL(mxc_audmux_v2_configure_port);
-static int mxc_audmux_init(void)
+static int __init imx_audmux_probe(struct platform_device *pdev)
{
- int ret;
- if (cpu_is_mx51()) {
- audmux_base = MX51_IO_ADDRESS(MX51_AUDMUX_BASE_ADDR);
- } else if (cpu_is_mx31()) {
- audmux_base = MX31_IO_ADDRESS(MX31_AUDMUX_BASE_ADDR);
- } else if (cpu_is_mx35()) {
- audmux_clk = clk_get(NULL, "audmux");
- if (IS_ERR(audmux_clk)) {
- ret = PTR_ERR(audmux_clk);
- printk(KERN_ERR "%s: cannot get clock: %d\n", __func__,
- ret);
- return ret;
- }
- audmux_base = MX35_IO_ADDRESS(MX35_AUDMUX_BASE_ADDR);
- } else if (cpu_is_mx25()) {
- audmux_clk = clk_get(NULL, "audmux");
- if (IS_ERR(audmux_clk)) {
- ret = PTR_ERR(audmux_clk);
- printk(KERN_ERR "%s: cannot get clock: %d\n", __func__,
- ret);
- return ret;
- }
- audmux_base = MX25_IO_ADDRESS(MX25_AUDMUX_BASE_ADDR);
- } else if (cpu_is_mx27()) {
- audmux_base = MX27_IO_ADDRESS(MX27_AUDMUX_BASE_ADDR);
- } else if (cpu_is_mx21()) {
- audmux_base = MX21_IO_ADDRESS(MX21_AUDMUX_BASE_ADDR);
+ struct resource *res;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ audmux_base = devm_request_and_ioremap(&pdev->dev, res);
+ if (!audmux_base)
+ return -EADDRNOTAVAIL;
+
+ audmux_clk = clk_get(&pdev->dev, "audmux");
+ if (IS_ERR(audmux_clk)) {
+ dev_dbg(&pdev->dev, "cannot get clock: %ld\n",
+ PTR_ERR(audmux_clk));
+ audmux_clk = NULL;
}
- if (!cpu_is_mx2())
+ audmux_type = pdev->id_entry->driver_data;
+ if (audmux_type == IMX31_AUDMUX)
audmux_debugfs_init();
return 0;
}
-postcore_initcall(mxc_audmux_init);
+static int __exit imx_audmux_remove(struct platform_device *pdev)
+{
+ if (audmux_type == IMX31_AUDMUX)
+ audmux_debugfs_remove();
+ clk_put(audmux_clk);
+
+ return 0;
+}
+
+static struct platform_driver imx_audmux_driver = {
+ .probe = imx_audmux_probe,
+ .remove = __exit_p(imx_audmux_remove),
+ .id_table = imx_audmux_ids,
+ .driver = {
+ .name = DRIVER_NAME,
+ .owner = THIS_MODULE,
+ }
+};
+
+static int __init imx_audmux_init(void)
+{
+ return platform_driver_register(&imx_audmux_driver);
+}
+subsys_initcall(imx_audmux_init);
+
+static void __exit imx_audmux_exit(void)
+{
+ platform_driver_unregister(&imx_audmux_driver);
+}
+module_exit(imx_audmux_exit);
+
+MODULE_DESCRIPTION("Freescale i.MX AUDMUX driver");
+MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:" DRIVER_NAME);
--
1.7.5.4
next prev parent reply other threads:[~2012-03-03 15:19 UTC|newest]
Thread overview: 65+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-03-03 15:19 [PATCH 00/20] ASoC: add imx-sgtl5000 machine driver working with fsl_ssi Shawn Guo
2012-03-03 15:19 ` [PATCH 01/20] ASoC: imx: move eukrea audmux call into ASoC machine driver Shawn Guo
2012-03-03 15:19 ` [PATCH 02/20] ASoC: imx: move phycore " Shawn Guo
2012-03-03 15:19 ` [PATCH 03/20] ARM: imx: merge audmux-v1 and audmux-v2 Shawn Guo
2012-03-05 0:22 ` Tabi Timur-B04825
2012-03-05 7:33 ` Shawn Guo
2012-03-03 15:19 ` Shawn Guo [this message]
2012-03-04 19:00 ` [PATCH 04/20] ARM: imx: convert audmux to a platform driver Sascha Hauer
2012-03-05 7:35 ` Shawn Guo
2012-03-03 15:19 ` [PATCH 05/20] ASoC: imx: move audmux driver into sound/soc/imx Shawn Guo
2012-03-03 15:19 ` [PATCH 06/20] ASoC: imx: rename audmux prefix mxc to imx Shawn Guo
2012-03-03 15:19 ` [PATCH 07/20] ASoC: imx: move SND_SOC_AC97_BUS selection down to machine driver Shawn Guo
2012-03-04 13:34 ` Mark Brown
2012-03-03 15:19 ` [PATCH 08/20] ASoC: imx: initialize dma_params burstsize just in imx-ssi Shawn Guo
2012-03-04 13:26 ` Mark Brown
2012-03-03 15:19 ` [PATCH 09/20] ASoC: imx: separate imx-pcm bits from imx-ssi driver Shawn Guo
2012-03-04 13:41 ` Mark Brown
2012-03-03 15:19 ` [PATCH 10/20] ASoC: imx: add an explicit Kconfig option for " Shawn Guo
2012-03-03 15:19 ` [PATCH 11/20] ASoC: fsl: separate SSI and DMA Kconfig options Shawn Guo
2012-03-03 15:19 ` [PATCH 12/20] ASoC: imx: merge sound/soc/imx into sound/soc/fsl Shawn Guo
2012-03-03 15:19 ` [PATCH 13/20] ASoC: fsl: create fsl_utils to accommodate the common functions Shawn Guo
2012-03-03 15:19 ` [PATCH 14/20] ASoC: fsl: check property 'compatible' for the machine name Shawn Guo
2012-03-03 15:19 ` [PATCH 15/20] ASoC: fsl: make fsl_ssi driver compilable on ARM/IMX Shawn Guo
2012-03-04 23:13 ` Tabi Timur-B04825
2012-03-04 23:28 ` Russell King - ARM Linux
2012-03-04 23:32 ` Tabi Timur-B04825
2012-03-05 0:04 ` Russell King - ARM Linux
2012-03-05 0:13 ` Tabi Timur-B04825
2012-03-05 0:26 ` Mark Brown
2012-03-06 10:40 ` Russell King - ARM Linux
2012-03-06 12:06 ` Mark Brown
2012-03-06 12:25 ` Russell King - ARM Linux
2012-03-06 12:33 ` Mark Brown
2012-03-06 13:02 ` Tabi Timur-B04825
2012-03-06 13:03 ` Mark Brown
2012-03-06 13:26 ` [alsa-devel] " Takashi Iwai
2012-03-06 13:38 ` Mark Brown
2012-03-06 13:46 ` Takashi Iwai
2012-03-06 13:52 ` Russell King - ARM Linux
2012-03-06 16:54 ` Mark Brown
2012-03-06 13:46 ` Russell King - ARM Linux
2012-03-06 10:39 ` Russell King - ARM Linux
2012-03-05 7:39 ` Shawn Guo
2012-03-05 12:28 ` Tabi Timur-B04825
2012-03-05 13:40 ` Shawn Guo
2012-03-03 15:19 ` [PATCH 16/20] ASoC: fsl: remove the fatal error checking on codec-handle Shawn Guo
2012-03-03 15:19 ` [PATCH 17/20] ASoC: fsl: let fsl_ssi work with imx pcm and machine drivers Shawn Guo
2012-03-03 15:19 ` [PATCH 18/20] ASoC: fsl: add dt support for imx-audmux Shawn Guo
2012-03-03 15:20 ` [PATCH 19/20] ASoC: rename sgtl5000 device tree binding document Shawn Guo
2012-03-04 13:39 ` Mark Brown
2012-03-03 15:20 ` [PATCH 20/20] ASoC: fsl: add imx-sgtl5000 machine driver Shawn Guo
2012-03-04 13:38 ` Mark Brown
2012-03-05 8:06 ` Shawn Guo
2012-03-05 11:56 ` Mark Brown
2012-03-05 13:07 ` Shawn Guo
2012-03-05 13:13 ` Mark Brown
2012-03-05 16:55 ` [alsa-devel] " Stephen Warren
2012-03-05 17:03 ` Mark Brown
2012-03-06 18:19 ` Stephen Warren
2012-03-06 20:11 ` Mark Brown
2012-03-05 16:58 ` Timur Tabi
2012-03-05 17:32 ` Mark Brown
2012-03-04 23:34 ` Tabi Timur-B04825
2012-03-05 8:07 ` Shawn Guo
2012-03-04 13:32 ` [PATCH 00/20] ASoC: add imx-sgtl5000 machine driver working with fsl_ssi Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1330788001-10158-5-git-send-email-shawn.guo@linaro.org \
--to=shawn.guo@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).