From: shawn.guo@linaro.org (Shawn Guo)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 05/20] ASoC: imx: move audmux driver into sound/soc/imx
Date: Sat, 3 Mar 2012 23:19:46 +0800 [thread overview]
Message-ID: <1330788001-10158-6-git-send-email-shawn.guo@linaro.org> (raw)
In-Reply-To: <1330788001-10158-1-git-send-email-shawn.guo@linaro.org>
As audmux becomes a platform driver and its callers are all ASoC
machine drivers, there is no reason to keep it in arch folder, so
move it to sound/soc/imx.
One bonus point would be those ASoC machine drivers stop including
mach/audmux.h, since it's been moved to sound/soc/imx/imx-audmux.h.
This should be a move to the right direction in terms of single kernel
image goal.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
arch/arm/mach-imx/Kconfig | 6 ------
arch/arm/mach-imx/eukrea_mbimxsd-baseboard.c | 1 -
arch/arm/plat-mxc/Kconfig | 3 ---
arch/arm/plat-mxc/Makefile | 1 -
sound/soc/imx/Kconfig | 7 +++++++
sound/soc/imx/Makefile | 2 ++
sound/soc/imx/eukrea-tlv320.c | 2 +-
.../audmux.c => sound/soc/imx/imx-audmux.c | 3 ++-
.../mach/audmux.h => sound/soc/imx/imx-audmux.h | 6 +++---
sound/soc/imx/mx27vis-aic32x4.c | 2 +-
sound/soc/imx/phycore-ac97.c | 3 ++-
sound/soc/imx/wm1133-ev1.c | 3 +--
12 files changed, 19 insertions(+), 20 deletions(-)
rename arch/arm/plat-mxc/audmux.c => sound/soc/imx/imx-audmux.c (99%)
rename arch/arm/plat-mxc/include/mach/audmux.h => sound/soc/imx/imx-audmux.h (96%)
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 495a854..3919fba 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -46,7 +46,6 @@ config SOC_IMX21
bool
select MACH_MX21
select CPU_ARM926T
- select ARCH_MXC_AUDMUX
select IMX_HAVE_DMA_V1
select IMX_HAVE_IOMUX_V1
select MXC_AVIC
@@ -55,7 +54,6 @@ config SOC_IMX25
bool
select ARCH_MX25
select CPU_ARM926T
- select ARCH_MXC_AUDMUX
select ARCH_MXC_IOMUX_V3
select MXC_AVIC
@@ -63,7 +61,6 @@ config SOC_IMX27
bool
select MACH_MX27
select CPU_ARM926T
- select ARCH_MXC_AUDMUX
select IMX_HAVE_DMA_V1
select IMX_HAVE_IOMUX_V1
select MXC_AVIC
@@ -72,7 +69,6 @@ config SOC_IMX31
bool
select CPU_V6
select IMX_HAVE_PLATFORM_MXC_RNGA
- select ARCH_MXC_AUDMUX
select MXC_AVIC
select SMP_ON_UP if SMP
@@ -80,7 +76,6 @@ config SOC_IMX35
bool
select CPU_V6
select ARCH_MXC_IOMUX_V3
- select ARCH_MXC_AUDMUX
select HAVE_EPIT
select MXC_AVIC
select SMP_ON_UP if SMP
@@ -89,7 +84,6 @@ config SOC_IMX5
select CPU_V7
select MXC_TZIC
select ARCH_MXC_IOMUX_V3
- select ARCH_MXC_AUDMUX
select ARCH_HAS_CPUFREQ
select ARCH_MX5
bool
diff --git a/arch/arm/mach-imx/eukrea_mbimxsd-baseboard.c b/arch/arm/mach-imx/eukrea_mbimxsd-baseboard.c
index d817fc8..aaa592f 100644
--- a/arch/arm/mach-imx/eukrea_mbimxsd-baseboard.c
+++ b/arch/arm/mach-imx/eukrea_mbimxsd-baseboard.c
@@ -37,7 +37,6 @@
#include <mach/hardware.h>
#include <mach/common.h>
#include <mach/iomux-mx51.h>
-#include <mach/audmux.h>
#include "devices-imx51.h"
diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig
index 0461d16..c722f9c 100644
--- a/arch/arm/plat-mxc/Kconfig
+++ b/arch/arm/plat-mxc/Kconfig
@@ -88,9 +88,6 @@ config IMX_HAVE_IOMUX_V1
config ARCH_MXC_IOMUX_V3
bool
-config ARCH_MXC_AUDMUX
- bool
-
config IRAM_ALLOC
bool
select GENERIC_ALLOCATOR
diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile
index 530c81d..e81290c 100644
--- a/arch/arm/plat-mxc/Makefile
+++ b/arch/arm/plat-mxc/Makefile
@@ -14,7 +14,6 @@ obj-$(CONFIG_IRAM_ALLOC) += iram_alloc.o
obj-$(CONFIG_MXC_PWM) += pwm.o
obj-$(CONFIG_MXC_ULPI) += ulpi.o
obj-$(CONFIG_MXC_USE_EPIT) += epit.o
-obj-$(CONFIG_ARCH_MXC_AUDMUX) += audmux.o
obj-$(CONFIG_MXC_DEBUG_BOARD) += 3ds_debugboard.o
obj-$(CONFIG_CPU_FREQ_IMX) += cpufreq.o
ifdef CONFIG_SND_IMX_SOC
diff --git a/sound/soc/imx/Kconfig b/sound/soc/imx/Kconfig
index 192861c..4025eee 100644
--- a/sound/soc/imx/Kconfig
+++ b/sound/soc/imx/Kconfig
@@ -17,11 +17,15 @@ config SND_MXC_SOC_MX2
select SND_SOC_DMAENGINE_PCM
tristate
+config SND_SOC_IMX_AUDMUX
+ tristate
+
config SND_MXC_SOC_WM1133_EV1
tristate "Audio on the the i.MX31ADS with WM1133-EV1 fitted"
depends on MACH_MX31ADS_WM1133_EV1 && EXPERIMENTAL
select SND_SOC_WM8350
select SND_MXC_SOC_FIQ
+ select SND_SOC_IMX_AUDMUX
help
Enable support for audio on the i.MX31ADS with the WM1133-EV1
PMIC board with WM8835x fitted.
@@ -31,6 +35,7 @@ config SND_SOC_MX27VIS_AIC32X4
depends on MACH_IMX27_VISSTRIM_M10 && I2C
select SND_SOC_TLV320AIC32X4
select SND_MXC_SOC_MX2
+ select SND_SOC_IMX_AUDMUX
help
Say Y if you want to add support for SoC audio on Visstrim SM10
board with TLV320AIC32X4 codec.
@@ -40,6 +45,7 @@ config SND_SOC_PHYCORE_AC97
depends on MACH_PCM043 || MACH_PCA100
select SND_SOC_WM9712
select SND_MXC_SOC_FIQ
+ select SND_SOC_IMX_AUDMUX
help
Say Y if you want to add support for SoC audio on Phytec phyCORE
and phyCARD boards in AC97 mode
@@ -53,6 +59,7 @@ config SND_SOC_EUKREA_TLV320
depends on I2C
select SND_SOC_TLV320AIC23
select SND_MXC_SOC_FIQ
+ select SND_SOC_IMX_AUDMUX
help
Enable I2S based access to the TLV320AIC23B codec attached
to the SSI interface
diff --git a/sound/soc/imx/Makefile b/sound/soc/imx/Makefile
index d6d609b..5c40541 100644
--- a/sound/soc/imx/Makefile
+++ b/sound/soc/imx/Makefile
@@ -2,10 +2,12 @@
snd-soc-imx-objs := imx-ssi.o
snd-soc-imx-fiq-objs := imx-pcm-fiq.o
snd-soc-imx-mx2-objs := imx-pcm-dma-mx2.o
+snd-soc-imx-audmux-objs := imx-audmux.o
obj-$(CONFIG_SND_IMX_SOC) += snd-soc-imx.o
obj-$(CONFIG_SND_MXC_SOC_FIQ) += snd-soc-imx-fiq.o
obj-$(CONFIG_SND_MXC_SOC_MX2) += snd-soc-imx-mx2.o
+obj-$(CONFIG_SND_SOC_IMX_AUDMUX) += snd-soc-imx-audmux.o
# i.MX Machine Support
snd-soc-eukrea-tlv320-objs := eukrea-tlv320.o
diff --git a/sound/soc/imx/eukrea-tlv320.c b/sound/soc/imx/eukrea-tlv320.c
index bfcb6d9..b375ed4 100644
--- a/sound/soc/imx/eukrea-tlv320.c
+++ b/sound/soc/imx/eukrea-tlv320.c
@@ -23,10 +23,10 @@
#include <sound/pcm.h>
#include <sound/soc.h>
#include <asm/mach-types.h>
-#include <mach/audmux.h>
#include "../codecs/tlv320aic23.h"
#include "imx-ssi.h"
+#include "imx-audmux.h"
#define CODEC_CLOCK 12000000
diff --git a/arch/arm/plat-mxc/audmux.c b/sound/soc/imx/imx-audmux.c
similarity index 99%
rename from arch/arm/plat-mxc/audmux.c
rename to sound/soc/imx/imx-audmux.c
index 98f5656..e0d8c4b 100644
--- a/arch/arm/plat-mxc/audmux.c
+++ b/sound/soc/imx/imx-audmux.c
@@ -24,7 +24,8 @@
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
-#include <mach/audmux.h>
+
+#include "imx-audmux.h"
#define DRIVER_NAME "imx-audmux"
diff --git a/arch/arm/plat-mxc/include/mach/audmux.h b/sound/soc/imx/imx-audmux.h
similarity index 96%
rename from arch/arm/plat-mxc/include/mach/audmux.h
rename to sound/soc/imx/imx-audmux.h
index 6fda788..5136d948 100644
--- a/arch/arm/plat-mxc/include/mach/audmux.h
+++ b/sound/soc/imx/imx-audmux.h
@@ -1,5 +1,5 @@
-#ifndef __MACH_AUDMUX_H
-#define __MACH_AUDMUX_H
+#ifndef __IMX_AUDMUX_H
+#define __IMX_AUDMUX_H
#define MX27_AUDMUX_HPCR1_SSI0 0
#define MX27_AUDMUX_HPCR2_SSI1 1
@@ -57,4 +57,4 @@ int mxc_audmux_v1_configure_port(unsigned int port, unsigned int pcr);
int mxc_audmux_v2_configure_port(unsigned int port, unsigned int ptcr,
unsigned int pdcr);
-#endif /* __MACH_AUDMUX_H */
+#endif /* __IMX_AUDMUX_H */
diff --git a/sound/soc/imx/mx27vis-aic32x4.c b/sound/soc/imx/mx27vis-aic32x4.c
index 155899c..dbfad0f 100644
--- a/sound/soc/imx/mx27vis-aic32x4.c
+++ b/sound/soc/imx/mx27vis-aic32x4.c
@@ -32,11 +32,11 @@
#include <sound/soc-dapm.h>
#include <sound/tlv.h>
#include <asm/mach-types.h>
-#include <mach/audmux.h>
#include <mach/iomux-mx27.h>
#include "../codecs/tlv320aic32x4.h"
#include "imx-ssi.h"
+#include "imx-audmux.h"
#define MX27VIS_AMP_GAIN 0
#define MX27VIS_AMP_MUTE 1
diff --git a/sound/soc/imx/phycore-ac97.c b/sound/soc/imx/phycore-ac97.c
index a59692e..7dab077 100644
--- a/sound/soc/imx/phycore-ac97.c
+++ b/sound/soc/imx/phycore-ac97.c
@@ -18,7 +18,8 @@
#include <sound/pcm.h>
#include <sound/soc.h>
#include <asm/mach-types.h>
-#include <mach/audmux.h>
+
+#include "imx-audmux.h"
static struct snd_soc_card imx_phycore;
diff --git a/sound/soc/imx/wm1133-ev1.c b/sound/soc/imx/wm1133-ev1.c
index 37480c9..15056d6 100644
--- a/sound/soc/imx/wm1133-ev1.c
+++ b/sound/soc/imx/wm1133-ev1.c
@@ -21,10 +21,9 @@
#include <sound/pcm_params.h>
#include <sound/soc.h>
-#include <mach/audmux.h>
-
#include "imx-ssi.h"
#include "../codecs/wm8350.h"
+#include "imx-audmux.h"
/* There is a silicon mic on the board optionally connected via a solder pad
* SP1. Define this to enable it.
--
1.7.5.4
next prev parent reply other threads:[~2012-03-03 15:19 UTC|newest]
Thread overview: 65+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-03-03 15:19 [PATCH 00/20] ASoC: add imx-sgtl5000 machine driver working with fsl_ssi Shawn Guo
2012-03-03 15:19 ` [PATCH 01/20] ASoC: imx: move eukrea audmux call into ASoC machine driver Shawn Guo
2012-03-03 15:19 ` [PATCH 02/20] ASoC: imx: move phycore " Shawn Guo
2012-03-03 15:19 ` [PATCH 03/20] ARM: imx: merge audmux-v1 and audmux-v2 Shawn Guo
2012-03-05 0:22 ` Tabi Timur-B04825
2012-03-05 7:33 ` Shawn Guo
2012-03-03 15:19 ` [PATCH 04/20] ARM: imx: convert audmux to a platform driver Shawn Guo
2012-03-04 19:00 ` Sascha Hauer
2012-03-05 7:35 ` Shawn Guo
2012-03-03 15:19 ` Shawn Guo [this message]
2012-03-03 15:19 ` [PATCH 06/20] ASoC: imx: rename audmux prefix mxc to imx Shawn Guo
2012-03-03 15:19 ` [PATCH 07/20] ASoC: imx: move SND_SOC_AC97_BUS selection down to machine driver Shawn Guo
2012-03-04 13:34 ` Mark Brown
2012-03-03 15:19 ` [PATCH 08/20] ASoC: imx: initialize dma_params burstsize just in imx-ssi Shawn Guo
2012-03-04 13:26 ` Mark Brown
2012-03-03 15:19 ` [PATCH 09/20] ASoC: imx: separate imx-pcm bits from imx-ssi driver Shawn Guo
2012-03-04 13:41 ` Mark Brown
2012-03-03 15:19 ` [PATCH 10/20] ASoC: imx: add an explicit Kconfig option for " Shawn Guo
2012-03-03 15:19 ` [PATCH 11/20] ASoC: fsl: separate SSI and DMA Kconfig options Shawn Guo
2012-03-03 15:19 ` [PATCH 12/20] ASoC: imx: merge sound/soc/imx into sound/soc/fsl Shawn Guo
2012-03-03 15:19 ` [PATCH 13/20] ASoC: fsl: create fsl_utils to accommodate the common functions Shawn Guo
2012-03-03 15:19 ` [PATCH 14/20] ASoC: fsl: check property 'compatible' for the machine name Shawn Guo
2012-03-03 15:19 ` [PATCH 15/20] ASoC: fsl: make fsl_ssi driver compilable on ARM/IMX Shawn Guo
2012-03-04 23:13 ` Tabi Timur-B04825
2012-03-04 23:28 ` Russell King - ARM Linux
2012-03-04 23:32 ` Tabi Timur-B04825
2012-03-05 0:04 ` Russell King - ARM Linux
2012-03-05 0:13 ` Tabi Timur-B04825
2012-03-05 0:26 ` Mark Brown
2012-03-06 10:40 ` Russell King - ARM Linux
2012-03-06 12:06 ` Mark Brown
2012-03-06 12:25 ` Russell King - ARM Linux
2012-03-06 12:33 ` Mark Brown
2012-03-06 13:02 ` Tabi Timur-B04825
2012-03-06 13:03 ` Mark Brown
2012-03-06 13:26 ` [alsa-devel] " Takashi Iwai
2012-03-06 13:38 ` Mark Brown
2012-03-06 13:46 ` Takashi Iwai
2012-03-06 13:52 ` Russell King - ARM Linux
2012-03-06 16:54 ` Mark Brown
2012-03-06 13:46 ` Russell King - ARM Linux
2012-03-06 10:39 ` Russell King - ARM Linux
2012-03-05 7:39 ` Shawn Guo
2012-03-05 12:28 ` Tabi Timur-B04825
2012-03-05 13:40 ` Shawn Guo
2012-03-03 15:19 ` [PATCH 16/20] ASoC: fsl: remove the fatal error checking on codec-handle Shawn Guo
2012-03-03 15:19 ` [PATCH 17/20] ASoC: fsl: let fsl_ssi work with imx pcm and machine drivers Shawn Guo
2012-03-03 15:19 ` [PATCH 18/20] ASoC: fsl: add dt support for imx-audmux Shawn Guo
2012-03-03 15:20 ` [PATCH 19/20] ASoC: rename sgtl5000 device tree binding document Shawn Guo
2012-03-04 13:39 ` Mark Brown
2012-03-03 15:20 ` [PATCH 20/20] ASoC: fsl: add imx-sgtl5000 machine driver Shawn Guo
2012-03-04 13:38 ` Mark Brown
2012-03-05 8:06 ` Shawn Guo
2012-03-05 11:56 ` Mark Brown
2012-03-05 13:07 ` Shawn Guo
2012-03-05 13:13 ` Mark Brown
2012-03-05 16:55 ` [alsa-devel] " Stephen Warren
2012-03-05 17:03 ` Mark Brown
2012-03-06 18:19 ` Stephen Warren
2012-03-06 20:11 ` Mark Brown
2012-03-05 16:58 ` Timur Tabi
2012-03-05 17:32 ` Mark Brown
2012-03-04 23:34 ` Tabi Timur-B04825
2012-03-05 8:07 ` Shawn Guo
2012-03-04 13:32 ` [PATCH 00/20] ASoC: add imx-sgtl5000 machine driver working with fsl_ssi Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1330788001-10158-6-git-send-email-shawn.guo@linaro.org \
--to=shawn.guo@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).