From: shawn.guo@linaro.org (Shawn Guo)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 10/17] ASoC: imx: merge sound/soc/imx into sound/soc/fsl
Date: Mon, 5 Mar 2012 22:30:58 +0800 [thread overview]
Message-ID: <1330957865-19085-11-git-send-email-shawn.guo@linaro.org> (raw)
In-Reply-To: <1330957865-19085-1-git-send-email-shawn.guo@linaro.org>
Freescale PowerPC and ARM/IMX families share the same SSI IP block.
The patch merges sound/soc/imx into sound/soc/fsl, so that the possible
code sharing and consolidation can happen.
This is a plain merge, except that menuconfig SND_POWERPC_SOC is added
in Kconfig for PowerPC platform as a correspondence to SND_IMX_SOC for
IMX platform.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
sound/soc/Kconfig | 1 -
sound/soc/Makefile | 1 -
sound/soc/fsl/Kconfig | 92 ++++++++++++++++++++++++++++++
sound/soc/fsl/Makefile | 22 +++++++
sound/soc/{imx => fsl}/eukrea-tlv320.c | 2 +-
sound/soc/{imx => fsl}/imx-audmux.c | 0
sound/soc/{imx => fsl}/imx-audmux.h | 0
sound/soc/{imx => fsl}/imx-pcm-dma-mx2.c | 0
sound/soc/{imx => fsl}/imx-pcm-fiq.c | 0
sound/soc/{imx => fsl}/imx-pcm.c | 0
sound/soc/{imx => fsl}/imx-pcm.h | 0
sound/soc/{imx => fsl}/imx-ssi.c | 2 +-
sound/soc/{imx => fsl}/imx-ssi.h | 0
sound/soc/{imx => fsl}/mx27vis-aic32x4.c | 0
sound/soc/{imx => fsl}/phycore-ac97.c | 0
sound/soc/{imx => fsl}/wm1133-ev1.c | 0
sound/soc/imx/Kconfig | 79 -------------------------
sound/soc/imx/Makefile | 22 -------
18 files changed, 116 insertions(+), 105 deletions(-)
rename sound/soc/{imx => fsl}/eukrea-tlv320.c (99%)
rename sound/soc/{imx => fsl}/imx-audmux.c (100%)
rename sound/soc/{imx => fsl}/imx-audmux.h (100%)
rename sound/soc/{imx => fsl}/imx-pcm-dma-mx2.c (100%)
rename sound/soc/{imx => fsl}/imx-pcm-fiq.c (100%)
rename sound/soc/{imx => fsl}/imx-pcm.c (100%)
rename sound/soc/{imx => fsl}/imx-pcm.h (100%)
rename sound/soc/{imx => fsl}/imx-ssi.c (99%)
rename sound/soc/{imx => fsl}/imx-ssi.h (100%)
rename sound/soc/{imx => fsl}/mx27vis-aic32x4.c (100%)
rename sound/soc/{imx => fsl}/phycore-ac97.c (100%)
rename sound/soc/{imx => fsl}/wm1133-ev1.c (100%)
delete mode 100644 sound/soc/imx/Kconfig
delete mode 100644 sound/soc/imx/Makefile
diff --git a/sound/soc/Kconfig b/sound/soc/Kconfig
index 91c9855..0f85f6d 100644
--- a/sound/soc/Kconfig
+++ b/sound/soc/Kconfig
@@ -35,7 +35,6 @@ source "sound/soc/blackfin/Kconfig"
source "sound/soc/davinci/Kconfig"
source "sound/soc/ep93xx/Kconfig"
source "sound/soc/fsl/Kconfig"
-source "sound/soc/imx/Kconfig"
source "sound/soc/jz4740/Kconfig"
source "sound/soc/nuc900/Kconfig"
source "sound/soc/omap/Kconfig"
diff --git a/sound/soc/Makefile b/sound/soc/Makefile
index 2feaf37..363dfd6 100644
--- a/sound/soc/Makefile
+++ b/sound/soc/Makefile
@@ -12,7 +12,6 @@ obj-$(CONFIG_SND_SOC) += blackfin/
obj-$(CONFIG_SND_SOC) += davinci/
obj-$(CONFIG_SND_SOC) += ep93xx/
obj-$(CONFIG_SND_SOC) += fsl/
-obj-$(CONFIG_SND_SOC) += imx/
obj-$(CONFIG_SND_SOC) += jz4740/
obj-$(CONFIG_SND_SOC) += mid-x86/
obj-$(CONFIG_SND_SOC) += mxs/
diff --git a/sound/soc/fsl/Kconfig b/sound/soc/fsl/Kconfig
index ca693b2..19856a0 100644
--- a/sound/soc/fsl/Kconfig
+++ b/sound/soc/fsl/Kconfig
@@ -1,3 +1,15 @@
+config SND_SOC_FSL_SSI
+ tristate
+
+menuconfig SND_POWERPC_SOC
+ tristate "SoC Audio for Freescale PowerPC CPUs"
+ depends on FSL_SOC
+ help
+ Say Y or M if you want to add support for codecs attached to
+ the PowerPC CPUs.
+
+if SND_POWERPC_SOC
+
config SND_MPC52xx_DMA
tristate
@@ -68,3 +80,83 @@ config SND_MPC52xx_SOC_EFIKA
help
Say Y if you want to add support for sound on the Efika.
+endif # SND_POWERPC_SOC
+
+menuconfig SND_IMX_SOC
+ tristate "SoC Audio for Freescale i.MX CPUs"
+ depends on ARCH_MXC
+ help
+ Say Y or M if you want to add support for codecs attached to
+ the i.MX CPUs.
+
+if SND_IMX_SOC
+
+config SND_SOC_IMX_SSI
+ tristate
+
+config SND_SOC_IMX_PCM
+ tristate
+
+config SND_MXC_SOC_FIQ
+ tristate
+ select FIQ
+ select SND_SOC_IMX_PCM
+
+config SND_MXC_SOC_MX2
+ tristate
+ select SND_SOC_DMAENGINE_PCM
+ select SND_SOC_IMX_PCM
+
+config SND_SOC_IMX_AUDMUX
+ tristate
+
+config SND_MXC_SOC_WM1133_EV1
+ tristate "Audio on the the i.MX31ADS with WM1133-EV1 fitted"
+ depends on MACH_MX31ADS_WM1133_EV1 && EXPERIMENTAL
+ select SND_SOC_WM8350
+ select SND_MXC_SOC_FIQ
+ select SND_SOC_IMX_AUDMUX
+ select SND_SOC_IMX_SSI
+ help
+ Enable support for audio on the i.MX31ADS with the WM1133-EV1
+ PMIC board with WM8835x fitted.
+
+config SND_SOC_MX27VIS_AIC32X4
+ tristate "SoC audio support for Visstrim M10 boards"
+ depends on MACH_IMX27_VISSTRIM_M10 && I2C
+ select SND_SOC_TLV320AIC32X4
+ select SND_MXC_SOC_MX2
+ select SND_SOC_IMX_AUDMUX
+ select SND_SOC_IMX_SSI
+ help
+ Say Y if you want to add support for SoC audio on Visstrim SM10
+ board with TLV320AIC32X4 codec.
+
+config SND_SOC_PHYCORE_AC97
+ tristate "SoC Audio support for Phytec phyCORE (and phyCARD) boards"
+ depends on MACH_PCM043 || MACH_PCA100
+ select SND_SOC_AC97_BUS
+ select SND_SOC_WM9712
+ select SND_MXC_SOC_FIQ
+ select SND_SOC_IMX_AUDMUX
+ select SND_SOC_IMX_SSI
+ help
+ Say Y if you want to add support for SoC audio on Phytec phyCORE
+ and phyCARD boards in AC97 mode
+
+config SND_SOC_EUKREA_TLV320
+ tristate "Eukrea TLV320"
+ depends on MACH_EUKREA_MBIMX27_BASEBOARD \
+ || MACH_EUKREA_MBIMXSD25_BASEBOARD \
+ || MACH_EUKREA_MBIMXSD35_BASEBOARD \
+ || MACH_EUKREA_MBIMXSD51_BASEBOARD
+ depends on I2C
+ select SND_SOC_TLV320AIC23
+ select SND_MXC_SOC_FIQ
+ select SND_SOC_IMX_AUDMUX
+ select SND_SOC_IMX_SSI
+ help
+ Enable I2S based access to the TLV320AIC23B codec attached
+ to the SSI interface
+
+endif # SND_IMX_SOC
diff --git a/sound/soc/fsl/Makefile b/sound/soc/fsl/Makefile
index 95d483f..36c257f 100644
--- a/sound/soc/fsl/Makefile
+++ b/sound/soc/fsl/Makefile
@@ -21,3 +21,25 @@ obj-$(CONFIG_SND_SOC_MPC5200_AC97) += mpc5200_psc_ac97.o
obj-$(CONFIG_SND_MPC52xx_SOC_PCM030) += pcm030-audio-fabric.o
obj-$(CONFIG_SND_MPC52xx_SOC_EFIKA) += efika-audio-fabric.o
+# i.MX Platform Support
+snd-soc-imx-ssi-objs := imx-ssi.o
+snd-soc-imx-audmux-objs := imx-audmux.o
+
+obj-$(CONFIG_SND_SOC_IMX_SSI) += snd-soc-imx-ssi.o
+obj-$(CONFIG_SND_SOC_IMX_AUDMUX) += snd-soc-imx-audmux.o
+
+obj-$(CONFIG_SND_SOC_IMX_PCM) += snd-soc-imx-pcm.o
+snd-soc-imx-pcm-y := imx-pcm.o
+snd-soc-imx-pcm-$(CONFIG_SND_MXC_SOC_FIQ) += imx-pcm-fiq.o
+snd-soc-imx-pcm-$(CONFIG_SND_MXC_SOC_MX2) += imx-pcm-dma-mx2.o
+
+# i.MX Machine Support
+snd-soc-eukrea-tlv320-objs := eukrea-tlv320.o
+snd-soc-phycore-ac97-objs := phycore-ac97.o
+snd-soc-mx27vis-aic32x4-objs := mx27vis-aic32x4.o
+snd-soc-wm1133-ev1-objs := wm1133-ev1.o
+
+obj-$(CONFIG_SND_SOC_EUKREA_TLV320) += snd-soc-eukrea-tlv320.o
+obj-$(CONFIG_SND_SOC_PHYCORE_AC97) += snd-soc-phycore-ac97.o
+obj-$(CONFIG_SND_SOC_MX27VIS_AIC32X4) += snd-soc-mx27vis-aic32x4.o
+obj-$(CONFIG_SND_MXC_SOC_WM1133_EV1) += snd-soc-wm1133-ev1.o
diff --git a/sound/soc/imx/eukrea-tlv320.c b/sound/soc/fsl/eukrea-tlv320.c
similarity index 99%
rename from sound/soc/imx/eukrea-tlv320.c
rename to sound/soc/fsl/eukrea-tlv320.c
index 7d4475c..efb9ede 100644
--- a/sound/soc/imx/eukrea-tlv320.c
+++ b/sound/soc/fsl/eukrea-tlv320.c
@@ -7,7 +7,7 @@
* which is Copyright 2009 Simtec Electronics
* and on sound/soc/imx/phycore-ac97.c which is
* Copyright 2009 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de>
- *
+ *
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
diff --git a/sound/soc/imx/imx-audmux.c b/sound/soc/fsl/imx-audmux.c
similarity index 100%
rename from sound/soc/imx/imx-audmux.c
rename to sound/soc/fsl/imx-audmux.c
diff --git a/sound/soc/imx/imx-audmux.h b/sound/soc/fsl/imx-audmux.h
similarity index 100%
rename from sound/soc/imx/imx-audmux.h
rename to sound/soc/fsl/imx-audmux.h
diff --git a/sound/soc/imx/imx-pcm-dma-mx2.c b/sound/soc/fsl/imx-pcm-dma-mx2.c
similarity index 100%
rename from sound/soc/imx/imx-pcm-dma-mx2.c
rename to sound/soc/fsl/imx-pcm-dma-mx2.c
diff --git a/sound/soc/imx/imx-pcm-fiq.c b/sound/soc/fsl/imx-pcm-fiq.c
similarity index 100%
rename from sound/soc/imx/imx-pcm-fiq.c
rename to sound/soc/fsl/imx-pcm-fiq.c
diff --git a/sound/soc/imx/imx-pcm.c b/sound/soc/fsl/imx-pcm.c
similarity index 100%
rename from sound/soc/imx/imx-pcm.c
rename to sound/soc/fsl/imx-pcm.c
diff --git a/sound/soc/imx/imx-pcm.h b/sound/soc/fsl/imx-pcm.h
similarity index 100%
rename from sound/soc/imx/imx-pcm.h
rename to sound/soc/fsl/imx-pcm.h
diff --git a/sound/soc/imx/imx-ssi.c b/sound/soc/fsl/imx-ssi.c
similarity index 99%
rename from sound/soc/imx/imx-ssi.c
rename to sound/soc/fsl/imx-ssi.c
index 4f81ed4..cf3ed03 100644
--- a/sound/soc/imx/imx-ssi.c
+++ b/sound/soc/fsl/imx-ssi.c
@@ -28,7 +28,7 @@
* value. When we read the same register two times (and the register still
* contains the same value) these status bits are not set. We work
* around this by not polling these bits but only wait a fixed delay.
- *
+ *
*/
#include <linux/clk.h>
diff --git a/sound/soc/imx/imx-ssi.h b/sound/soc/fsl/imx-ssi.h
similarity index 100%
rename from sound/soc/imx/imx-ssi.h
rename to sound/soc/fsl/imx-ssi.h
diff --git a/sound/soc/imx/mx27vis-aic32x4.c b/sound/soc/fsl/mx27vis-aic32x4.c
similarity index 100%
rename from sound/soc/imx/mx27vis-aic32x4.c
rename to sound/soc/fsl/mx27vis-aic32x4.c
diff --git a/sound/soc/imx/phycore-ac97.c b/sound/soc/fsl/phycore-ac97.c
similarity index 100%
rename from sound/soc/imx/phycore-ac97.c
rename to sound/soc/fsl/phycore-ac97.c
diff --git a/sound/soc/imx/wm1133-ev1.c b/sound/soc/fsl/wm1133-ev1.c
similarity index 100%
rename from sound/soc/imx/wm1133-ev1.c
rename to sound/soc/fsl/wm1133-ev1.c
diff --git a/sound/soc/imx/Kconfig b/sound/soc/imx/Kconfig
deleted file mode 100644
index 810acaa..0000000
--- a/sound/soc/imx/Kconfig
+++ /dev/null
@@ -1,79 +0,0 @@
-menuconfig SND_IMX_SOC
- tristate "SoC Audio for Freescale i.MX CPUs"
- depends on ARCH_MXC
- help
- Say Y or M if you want to add support for codecs attached to
- the i.MX SSI interface.
-
-
-if SND_IMX_SOC
-
-config SND_SOC_IMX_SSI
- tristate
-
-config SND_SOC_IMX_PCM
- tristate
-
-config SND_MXC_SOC_FIQ
- tristate
- select FIQ
- select SND_SOC_IMX_PCM
-
-config SND_MXC_SOC_MX2
- select SND_SOC_DMAENGINE_PCM
- tristate
- select SND_SOC_IMX_PCM
-
-config SND_SOC_IMX_AUDMUX
- tristate
-
-config SND_MXC_SOC_WM1133_EV1
- tristate "Audio on the the i.MX31ADS with WM1133-EV1 fitted"
- depends on MACH_MX31ADS_WM1133_EV1 && EXPERIMENTAL
- select SND_SOC_WM8350
- select SND_MXC_SOC_FIQ
- select SND_SOC_IMX_AUDMUX
- select SND_SOC_IMX_SSI
- help
- Enable support for audio on the i.MX31ADS with the WM1133-EV1
- PMIC board with WM8835x fitted.
-
-config SND_SOC_MX27VIS_AIC32X4
- tristate "SoC audio support for Visstrim M10 boards"
- depends on MACH_IMX27_VISSTRIM_M10 && I2C
- select SND_SOC_TLV320AIC32X4
- select SND_MXC_SOC_MX2
- select SND_SOC_IMX_AUDMUX
- select SND_SOC_IMX_SSI
- help
- Say Y if you want to add support for SoC audio on Visstrim SM10
- board with TLV320AIC32X4 codec.
-
-config SND_SOC_PHYCORE_AC97
- tristate "SoC Audio support for Phytec phyCORE (and phyCARD) boards"
- depends on MACH_PCM043 || MACH_PCA100
- select SND_SOC_AC97_BUS
- select SND_SOC_WM9712
- select SND_MXC_SOC_FIQ
- select SND_SOC_IMX_AUDMUX
- select SND_SOC_IMX_SSI
- help
- Say Y if you want to add support for SoC audio on Phytec phyCORE
- and phyCARD boards in AC97 mode
-
-config SND_SOC_EUKREA_TLV320
- tristate "Eukrea TLV320"
- depends on MACH_EUKREA_MBIMX27_BASEBOARD \
- || MACH_EUKREA_MBIMXSD25_BASEBOARD \
- || MACH_EUKREA_MBIMXSD35_BASEBOARD \
- || MACH_EUKREA_MBIMXSD51_BASEBOARD
- depends on I2C
- select SND_SOC_TLV320AIC23
- select SND_MXC_SOC_FIQ
- select SND_SOC_IMX_AUDMUX
- select SND_SOC_IMX_SSI
- help
- Enable I2S based access to the TLV320AIC23B codec attached
- to the SSI interface
-
-endif # SND_IMX_SOC
diff --git a/sound/soc/imx/Makefile b/sound/soc/imx/Makefile
deleted file mode 100644
index f5db3e9..0000000
--- a/sound/soc/imx/Makefile
+++ /dev/null
@@ -1,22 +0,0 @@
-# i.MX Platform Support
-snd-soc-imx-ssi-objs := imx-ssi.o
-snd-soc-imx-audmux-objs := imx-audmux.o
-
-obj-$(CONFIG_SND_SOC_IMX_SSI) += snd-soc-imx-ssi.o
-obj-$(CONFIG_SND_SOC_IMX_AUDMUX) += snd-soc-imx-audmux.o
-
-obj-$(CONFIG_SND_SOC_IMX_PCM) += snd-soc-imx-pcm.o
-snd-soc-imx-pcm-y := imx-pcm.o
-snd-soc-imx-pcm-$(CONFIG_SND_MXC_SOC_FIQ) += imx-pcm-fiq.o
-snd-soc-imx-pcm-$(CONFIG_SND_MXC_SOC_MX2) += imx-pcm-dma-mx2.o
-
-# i.MX Machine Support
-snd-soc-eukrea-tlv320-objs := eukrea-tlv320.o
-snd-soc-phycore-ac97-objs := phycore-ac97.o
-snd-soc-mx27vis-aic32x4-objs := mx27vis-aic32x4.o
-snd-soc-wm1133-ev1-objs := wm1133-ev1.o
-
-obj-$(CONFIG_SND_SOC_EUKREA_TLV320) += snd-soc-eukrea-tlv320.o
-obj-$(CONFIG_SND_SOC_PHYCORE_AC97) += snd-soc-phycore-ac97.o
-obj-$(CONFIG_SND_SOC_MX27VIS_AIC32X4) += snd-soc-mx27vis-aic32x4.o
-obj-$(CONFIG_SND_MXC_SOC_WM1133_EV1) += snd-soc-wm1133-ev1.o
--
1.7.5.4
next prev parent reply other threads:[~2012-03-05 14:30 UTC|newest]
Thread overview: 61+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-03-05 14:30 [PATCH v2 00/17] ASoC: add imx-sgtl5000 machine driver working with fsl_ssi Shawn Guo
2012-03-05 14:20 ` Mark Brown
2012-03-05 14:44 ` Shawn Guo
2012-03-05 14:35 ` Mark Brown
2012-03-05 14:30 ` [PATCH v2 01/17] ASoC: imx: move eukrea audmux call into ASoC machine driver Shawn Guo
2012-03-05 17:46 ` Mark Brown
2012-03-05 17:55 ` Matt Sealey
2012-03-05 20:36 ` Mark Brown
2012-03-05 19:27 ` Sascha Hauer
2012-03-05 23:45 ` Shawn Guo
2012-03-06 0:06 ` Mark Brown
2012-03-05 14:30 ` [PATCH v2 02/17] ASoC: imx: move phycore " Shawn Guo
2012-03-05 14:30 ` [PATCH v2 03/17] ARM: imx: merge audmux-v1 and audmux-v2 Shawn Guo
2012-03-05 14:30 ` [PATCH v2 04/17] ARM: imx: convert audmux to a platform driver Shawn Guo
2012-03-05 14:30 ` [PATCH v2 05/17] ASoC: imx: move audmux driver into sound/soc/imx Shawn Guo
2012-03-05 14:30 ` [PATCH v2 06/17] ASoC: imx: rename audmux prefix mxc to imx Shawn Guo
2012-03-05 14:30 ` [PATCH v2 07/17] ASoC: imx: separate imx-pcm bits from imx-ssi driver Shawn Guo
2012-03-05 14:30 ` [PATCH v2 08/17] ASoC: imx: add an explicit Kconfig option for " Shawn Guo
2012-03-05 14:30 ` [PATCH v2 09/17] ASoC: fsl: separate SSI and DMA Kconfig options Shawn Guo
2012-03-07 20:20 ` Timur Tabi
2012-03-08 13:08 ` Shawn Guo
2012-03-05 14:30 ` Shawn Guo [this message]
2012-03-05 17:39 ` [PATCH v2 10/17] ASoC: imx: merge sound/soc/imx into sound/soc/fsl Sascha Hauer
2012-03-05 23:46 ` Shawn Guo
2012-03-06 5:46 ` Shawn Guo
2012-03-05 14:30 ` [PATCH v2 11/17] ASoC: fsl: create fsl_utils to accommodate the common functions Shawn Guo
2012-03-05 14:49 ` Mark Brown
2012-03-05 15:48 ` Timur Tabi
2012-03-05 16:15 ` Mark Brown
2012-03-06 6:27 ` Shawn Guo
2012-03-05 14:31 ` [PATCH v2 12/17] ASoC: fsl: check property 'compatible' for the machine name Shawn Guo
2012-03-05 14:31 ` [PATCH v2 13/17] ASoC: fsl: make fsl_ssi driver compilable on ARM/IMX Shawn Guo
2012-03-05 14:31 ` [PATCH v2 14/17] ASoC: fsl: remove the fatal error checking on codec-handle Shawn Guo
2012-03-05 14:31 ` [PATCH v2 15/17] ASoC: fsl: let fsl_ssi work with imx pcm and machine drivers Shawn Guo
2012-03-05 14:31 ` [PATCH v2 16/17] ASoC: fsl: add dt support for imx-audmux Shawn Guo
2012-03-06 12:49 ` Mark Brown
2012-03-06 13:13 ` Shawn Guo
2012-03-05 14:31 ` [PATCH v2 17/17] ASoC: fsl: add imx-sgtl5000 machine driver Shawn Guo
2012-03-05 14:46 ` Mark Brown
2012-03-06 7:39 ` Shawn Guo
2012-03-06 12:02 ` Mark Brown
2012-03-06 13:34 ` Shawn Guo
2012-03-06 13:35 ` Mark Brown
2012-03-05 17:42 ` Sascha Hauer
2012-03-05 18:09 ` Matt Sealey
2012-03-05 19:32 ` Sascha Hauer
2012-03-05 20:44 ` Mark Brown
2012-03-05 21:08 ` Timur Tabi
2012-03-06 15:50 ` Shawn Guo
2012-03-07 8:37 ` Sascha Hauer
2012-03-07 21:05 ` [PATCH v2 00/17] ASoC: add imx-sgtl5000 machine driver working with fsl_ssi Timur Tabi
2012-03-07 21:08 ` Mark Brown
2012-03-07 23:03 ` Timur Tabi
2012-03-08 11:51 ` Mark Brown
2012-03-08 12:33 ` Shawn Guo
2012-03-08 12:36 ` Tabi Timur-B04825
2012-03-07 23:18 ` Timur Tabi
2012-03-08 12:02 ` Mark Brown
2012-03-08 12:37 ` Shawn Guo
2012-03-08 13:11 ` Shawn Guo
2012-03-08 14:45 ` Tabi Timur-B04825
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1330957865-19085-11-git-send-email-shawn.guo@linaro.org \
--to=shawn.guo@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).