From: shawn.guo@linaro.org (Shawn Guo)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 04/17] ARM: imx: convert audmux to a platform driver
Date: Mon, 5 Mar 2012 22:30:52 +0800 [thread overview]
Message-ID: <1330957865-19085-5-git-send-email-shawn.guo@linaro.org> (raw)
In-Reply-To: <1330957865-19085-1-git-send-email-shawn.guo@linaro.org>
From: Richard Zhao <richard.zhao@linaro.org>
It coverts audmux to a platform driver, so that it can be moved into
sound/soc/imx and adopt device tree support later.
Signed-off-by: Richard Zhao <richard.zhao@linaro.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
arch/arm/mach-imx/mm-imx21.c | 6 ++
arch/arm/mach-imx/mm-imx25.c | 7 ++
arch/arm/mach-imx/mm-imx27.c | 7 ++
arch/arm/mach-imx/mm-imx3.c | 13 ++++
arch/arm/mach-imx/mm-imx5.c | 22 +++++++
arch/arm/plat-mxc/audmux.c | 127 ++++++++++++++++++++++++++++++------------
6 files changed, 147 insertions(+), 35 deletions(-)
diff --git a/arch/arm/mach-imx/mm-imx21.c b/arch/arm/mach-imx/mm-imx21.c
index 3f05dfe..14d540e 100644
--- a/arch/arm/mach-imx/mm-imx21.c
+++ b/arch/arm/mach-imx/mm-imx21.c
@@ -75,6 +75,10 @@ void __init mx21_init_irq(void)
mxc_init_irq(MX21_IO_ADDRESS(MX21_AVIC_BASE_ADDR));
}
+static const struct resource imx21_audmux_res[] __initconst = {
+ DEFINE_RES_MEM(MX21_AUDMUX_BASE_ADDR, SZ_4K),
+};
+
void __init imx21_soc_init(void)
{
mxc_register_gpio("imx21-gpio", 0, MX21_GPIO1_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0);
@@ -85,4 +89,6 @@ void __init imx21_soc_init(void)
mxc_register_gpio("imx21-gpio", 5, MX21_GPIO6_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0);
imx_add_imx_dma();
+ platform_device_register_simple("imx21-audmux", 0, imx21_audmux_res,
+ ARRAY_SIZE(imx21_audmux_res));
}
diff --git a/arch/arm/mach-imx/mm-imx25.c b/arch/arm/mach-imx/mm-imx25.c
index cc4d152..153b457 100644
--- a/arch/arm/mach-imx/mm-imx25.c
+++ b/arch/arm/mach-imx/mm-imx25.c
@@ -83,6 +83,10 @@ static struct sdma_platform_data imx25_sdma_pdata __initdata = {
.script_addrs = &imx25_sdma_script,
};
+static const struct resource imx25_audmux_res[] __initconst = {
+ DEFINE_RES_MEM(MX25_AUDMUX_BASE_ADDR, SZ_16K),
+};
+
void __init imx25_soc_init(void)
{
/* i.mx25 has the i.mx31 type gpio */
@@ -93,4 +97,7 @@ void __init imx25_soc_init(void)
/* i.mx25 has the i.mx35 type sdma */
imx_add_imx_sdma("imx35-sdma", MX25_SDMA_BASE_ADDR, MX25_INT_SDMA, &imx25_sdma_pdata);
+ /* i.mx25 has the i.mx31 type audmux */
+ platform_device_register_simple("imx31-audmux", 0, imx25_audmux_res,
+ ARRAY_SIZE(imx25_audmux_res));
}
diff --git a/arch/arm/mach-imx/mm-imx27.c b/arch/arm/mach-imx/mm-imx27.c
index 96dd1f5..8cb3f5e 100644
--- a/arch/arm/mach-imx/mm-imx27.c
+++ b/arch/arm/mach-imx/mm-imx27.c
@@ -75,6 +75,10 @@ void __init mx27_init_irq(void)
mxc_init_irq(MX27_IO_ADDRESS(MX27_AVIC_BASE_ADDR));
}
+static const struct resource imx27_audmux_res[] __initconst = {
+ DEFINE_RES_MEM(MX27_AUDMUX_BASE_ADDR, SZ_4K),
+};
+
void __init imx27_soc_init(void)
{
/* i.mx27 has the i.mx21 type gpio */
@@ -86,4 +90,7 @@ void __init imx27_soc_init(void)
mxc_register_gpio("imx21-gpio", 5, MX27_GPIO6_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0);
imx_add_imx_dma();
+ /* imx27 has the imx21 type audmux */
+ platform_device_register_simple("imx21-audmux", 0, imx27_audmux_res,
+ ARRAY_SIZE(imx27_audmux_res));
}
diff --git a/arch/arm/mach-imx/mm-imx3.c b/arch/arm/mach-imx/mm-imx3.c
index 31807d2..2530c15 100644
--- a/arch/arm/mach-imx/mm-imx3.c
+++ b/arch/arm/mach-imx/mm-imx3.c
@@ -158,6 +158,10 @@ static struct sdma_platform_data imx31_sdma_pdata __initdata = {
.script_addrs = &imx31_to2_sdma_script,
};
+static const struct resource imx31_audmux_res[] __initconst = {
+ DEFINE_RES_MEM(MX31_AUDMUX_BASE_ADDR, SZ_16K),
+};
+
void __init imx31_soc_init(void)
{
int to_version = mx31_revision() >> 4;
@@ -175,6 +179,8 @@ void __init imx31_soc_init(void)
}
imx_add_imx_sdma("imx31-sdma", MX31_SDMA_BASE_ADDR, MX31_INT_SDMA, &imx31_sdma_pdata);
+ platform_device_register_simple("imx31-audmux", 0, imx31_audmux_res,
+ ARRAY_SIZE(imx31_audmux_res));
}
#endif /* ifdef CONFIG_SOC_IMX31 */
@@ -241,6 +247,10 @@ static struct sdma_platform_data imx35_sdma_pdata __initdata = {
.script_addrs = &imx35_to2_sdma_script,
};
+static const struct resource imx35_audmux_res[] __initconst = {
+ DEFINE_RES_MEM(MX35_AUDMUX_BASE_ADDR, SZ_16K),
+};
+
void __init imx35_soc_init(void)
{
int to_version = mx35_revision() >> 4;
@@ -259,5 +269,8 @@ void __init imx35_soc_init(void)
}
imx_add_imx_sdma("imx35-sdma", MX35_SDMA_BASE_ADDR, MX35_INT_SDMA, &imx35_sdma_pdata);
+ /* i.mx35 has the i.mx31 type audmux */
+ platform_device_register_simple("imx31-audmux", 0, imx35_audmux_res,
+ ARRAY_SIZE(imx35_audmux_res));
}
#endif /* ifdef CONFIG_SOC_IMX35 */
diff --git a/arch/arm/mach-imx/mm-imx5.c b/arch/arm/mach-imx/mm-imx5.c
index bc17dfe..90d7880 100644
--- a/arch/arm/mach-imx/mm-imx5.c
+++ b/arch/arm/mach-imx/mm-imx5.c
@@ -170,6 +170,18 @@ static struct sdma_platform_data imx53_sdma_pdata __initdata = {
.script_addrs = &imx53_sdma_script,
};
+static const struct resource imx50_audmux_res[] __initconst = {
+ DEFINE_RES_MEM(MX50_AUDMUX_BASE_ADDR, SZ_16K),
+};
+
+static const struct resource imx51_audmux_res[] __initconst = {
+ DEFINE_RES_MEM(MX51_AUDMUX_BASE_ADDR, SZ_16K),
+};
+
+static const struct resource imx53_audmux_res[] __initconst = {
+ DEFINE_RES_MEM(MX53_AUDMUX_BASE_ADDR, SZ_16K),
+};
+
void __init imx50_soc_init(void)
{
/* i.mx50 has the i.mx31 type gpio */
@@ -179,6 +191,10 @@ void __init imx50_soc_init(void)
mxc_register_gpio("imx31-gpio", 3, MX50_GPIO4_BASE_ADDR, SZ_16K, MX50_INT_GPIO4_LOW, MX50_INT_GPIO4_HIGH);
mxc_register_gpio("imx31-gpio", 4, MX50_GPIO5_BASE_ADDR, SZ_16K, MX50_INT_GPIO5_LOW, MX50_INT_GPIO5_HIGH);
mxc_register_gpio("imx31-gpio", 5, MX50_GPIO6_BASE_ADDR, SZ_16K, MX50_INT_GPIO6_LOW, MX50_INT_GPIO6_HIGH);
+
+ /* i.mx50 has the i.mx31 type audmux */
+ platform_device_register_simple("imx31-audmux", 0, imx50_audmux_res,
+ ARRAY_SIZE(imx50_audmux_res));
}
void __init imx51_soc_init(void)
@@ -191,6 +207,9 @@ void __init imx51_soc_init(void)
/* i.mx51 has the i.mx35 type sdma */
imx_add_imx_sdma("imx35-sdma", MX51_SDMA_BASE_ADDR, MX51_INT_SDMA, &imx51_sdma_pdata);
+ /* i.mx51 has the i.mx31 type audmux */
+ platform_device_register_simple("imx31-audmux", 0, imx51_audmux_res,
+ ARRAY_SIZE(imx51_audmux_res));
}
void __init imx53_soc_init(void)
@@ -206,4 +225,7 @@ void __init imx53_soc_init(void)
/* i.mx53 has the i.mx35 type sdma */
imx_add_imx_sdma("imx35-sdma", MX53_SDMA_BASE_ADDR, MX53_INT_SDMA, &imx53_sdma_pdata);
+ /* i.mx53 has the i.mx31 type audmux */
+ platform_device_register_simple("imx31-audmux", 0, imx53_audmux_res,
+ ARRAY_SIZE(imx53_audmux_res));
}
diff --git a/arch/arm/plat-mxc/audmux.c b/arch/arm/plat-mxc/audmux.c
index b49a39f..a8c9e04 100644
--- a/arch/arm/plat-mxc/audmux.c
+++ b/arch/arm/plat-mxc/audmux.c
@@ -1,4 +1,6 @@
/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2012 Linaro Ltd.
* Copyright 2009 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
*
* Initial development of this code was funded by
@@ -15,14 +17,16 @@
* GNU General Public License for more details.
*/
-#include <linux/module.h>
-#include <linux/err.h>
-#include <linux/io.h>
#include <linux/clk.h>
#include <linux/debugfs.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
#include <linux/slab.h>
#include <mach/audmux.h>
-#include <mach/hardware.h>
+
+#define DRIVER_NAME "imx-audmux"
static struct clk *audmux_clk;
static void __iomem *audmux_base;
@@ -140,7 +144,7 @@ static const struct file_operations audmux_debugfs_fops = {
.llseek = default_llseek,
};
-static void audmux_debugfs_init(void)
+static void __init audmux_debugfs_init(void)
{
int i;
char buf[20];
@@ -159,18 +163,48 @@ static void audmux_debugfs_init(void)
i);
}
}
+
+static void __exit audmux_debugfs_remove(void)
+{
+ debugfs_remove_recursive(audmux_debugfs_root);
+}
#else
static inline void audmux_debugfs_init(void)
{
}
+
+static inline void audmux_debugfs_remove(void)
+{
+}
#endif
+enum imx_audmux_type {
+ IMX21_AUDMUX,
+ IMX31_AUDMUX,
+} audmux_type;
+
+static struct platform_device_id imx_audmux_ids[] = {
+ {
+ .name = "imx21-audmux",
+ .driver_data = IMX21_AUDMUX,
+ }, {
+ .name = "imx31-audmux",
+ .driver_data = IMX31_AUDMUX,
+ }, {
+ /* sentinel */
+ }
+};
+MODULE_DEVICE_TABLE(platform, imx_audmux_ids);
+
static const uint8_t port_mapping[] = {
0x0, 0x4, 0x8, 0x10, 0x14, 0x1c,
};
int mxc_audmux_v1_configure_port(unsigned int port, unsigned int pcr)
{
+ if (audmux_type != IMX21_AUDMUX)
+ return -EINVAL;
+
if (!audmux_base)
return -ENOSYS;
@@ -186,6 +220,9 @@ EXPORT_SYMBOL_GPL(mxc_audmux_v1_configure_port);
int mxc_audmux_v2_configure_port(unsigned int port, unsigned int ptcr,
unsigned int pdcr)
{
+ if (audmux_type != IMX31_AUDMUX)
+ return -EINVAL;
+
if (!audmux_base)
return -ENOSYS;
@@ -202,41 +239,61 @@ int mxc_audmux_v2_configure_port(unsigned int port, unsigned int ptcr,
}
EXPORT_SYMBOL_GPL(mxc_audmux_v2_configure_port);
-static int mxc_audmux_init(void)
+static int __init imx_audmux_probe(struct platform_device *pdev)
{
- int ret;
- if (cpu_is_mx51()) {
- audmux_base = MX51_IO_ADDRESS(MX51_AUDMUX_BASE_ADDR);
- } else if (cpu_is_mx31()) {
- audmux_base = MX31_IO_ADDRESS(MX31_AUDMUX_BASE_ADDR);
- } else if (cpu_is_mx35()) {
- audmux_clk = clk_get(NULL, "audmux");
- if (IS_ERR(audmux_clk)) {
- ret = PTR_ERR(audmux_clk);
- printk(KERN_ERR "%s: cannot get clock: %d\n", __func__,
- ret);
- return ret;
- }
- audmux_base = MX35_IO_ADDRESS(MX35_AUDMUX_BASE_ADDR);
- } else if (cpu_is_mx25()) {
- audmux_clk = clk_get(NULL, "audmux");
- if (IS_ERR(audmux_clk)) {
- ret = PTR_ERR(audmux_clk);
- printk(KERN_ERR "%s: cannot get clock: %d\n", __func__,
- ret);
- return ret;
- }
- audmux_base = MX25_IO_ADDRESS(MX25_AUDMUX_BASE_ADDR);
- } else if (cpu_is_mx27()) {
- audmux_base = MX27_IO_ADDRESS(MX27_AUDMUX_BASE_ADDR);
- } else if (cpu_is_mx21()) {
- audmux_base = MX21_IO_ADDRESS(MX21_AUDMUX_BASE_ADDR);
+ struct resource *res;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ audmux_base = devm_request_and_ioremap(&pdev->dev, res);
+ if (!audmux_base)
+ return -EADDRNOTAVAIL;
+
+ audmux_clk = clk_get(&pdev->dev, "audmux");
+ if (IS_ERR(audmux_clk)) {
+ dev_dbg(&pdev->dev, "cannot get clock: %ld\n",
+ PTR_ERR(audmux_clk));
+ audmux_clk = NULL;
}
- if (!cpu_is_mx2())
+ audmux_type = pdev->id_entry->driver_data;
+ if (audmux_type == IMX31_AUDMUX)
audmux_debugfs_init();
return 0;
}
-postcore_initcall(mxc_audmux_init);
+static int __exit imx_audmux_remove(struct platform_device *pdev)
+{
+ if (audmux_type == IMX31_AUDMUX)
+ audmux_debugfs_remove();
+ clk_put(audmux_clk);
+
+ return 0;
+}
+
+static struct platform_driver imx_audmux_driver = {
+ .probe = imx_audmux_probe,
+ .remove = __exit_p(imx_audmux_remove),
+ .id_table = imx_audmux_ids,
+ .driver = {
+ .name = DRIVER_NAME,
+ .owner = THIS_MODULE,
+ }
+};
+
+static int __init imx_audmux_init(void)
+{
+ return platform_driver_register(&imx_audmux_driver);
+}
+subsys_initcall(imx_audmux_init);
+
+static void __exit imx_audmux_exit(void)
+{
+ platform_driver_unregister(&imx_audmux_driver);
+}
+module_exit(imx_audmux_exit);
+
+MODULE_DESCRIPTION("Freescale i.MX AUDMUX driver");
+MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:" DRIVER_NAME);
--
1.7.5.4
next prev parent reply other threads:[~2012-03-05 14:30 UTC|newest]
Thread overview: 61+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-03-05 14:30 [PATCH v2 00/17] ASoC: add imx-sgtl5000 machine driver working with fsl_ssi Shawn Guo
2012-03-05 14:20 ` Mark Brown
2012-03-05 14:44 ` Shawn Guo
2012-03-05 14:35 ` Mark Brown
2012-03-05 14:30 ` [PATCH v2 01/17] ASoC: imx: move eukrea audmux call into ASoC machine driver Shawn Guo
2012-03-05 17:46 ` Mark Brown
2012-03-05 17:55 ` Matt Sealey
2012-03-05 20:36 ` Mark Brown
2012-03-05 19:27 ` Sascha Hauer
2012-03-05 23:45 ` Shawn Guo
2012-03-06 0:06 ` Mark Brown
2012-03-05 14:30 ` [PATCH v2 02/17] ASoC: imx: move phycore " Shawn Guo
2012-03-05 14:30 ` [PATCH v2 03/17] ARM: imx: merge audmux-v1 and audmux-v2 Shawn Guo
2012-03-05 14:30 ` Shawn Guo [this message]
2012-03-05 14:30 ` [PATCH v2 05/17] ASoC: imx: move audmux driver into sound/soc/imx Shawn Guo
2012-03-05 14:30 ` [PATCH v2 06/17] ASoC: imx: rename audmux prefix mxc to imx Shawn Guo
2012-03-05 14:30 ` [PATCH v2 07/17] ASoC: imx: separate imx-pcm bits from imx-ssi driver Shawn Guo
2012-03-05 14:30 ` [PATCH v2 08/17] ASoC: imx: add an explicit Kconfig option for " Shawn Guo
2012-03-05 14:30 ` [PATCH v2 09/17] ASoC: fsl: separate SSI and DMA Kconfig options Shawn Guo
2012-03-07 20:20 ` Timur Tabi
2012-03-08 13:08 ` Shawn Guo
2012-03-05 14:30 ` [PATCH v2 10/17] ASoC: imx: merge sound/soc/imx into sound/soc/fsl Shawn Guo
2012-03-05 17:39 ` Sascha Hauer
2012-03-05 23:46 ` Shawn Guo
2012-03-06 5:46 ` Shawn Guo
2012-03-05 14:30 ` [PATCH v2 11/17] ASoC: fsl: create fsl_utils to accommodate the common functions Shawn Guo
2012-03-05 14:49 ` Mark Brown
2012-03-05 15:48 ` Timur Tabi
2012-03-05 16:15 ` Mark Brown
2012-03-06 6:27 ` Shawn Guo
2012-03-05 14:31 ` [PATCH v2 12/17] ASoC: fsl: check property 'compatible' for the machine name Shawn Guo
2012-03-05 14:31 ` [PATCH v2 13/17] ASoC: fsl: make fsl_ssi driver compilable on ARM/IMX Shawn Guo
2012-03-05 14:31 ` [PATCH v2 14/17] ASoC: fsl: remove the fatal error checking on codec-handle Shawn Guo
2012-03-05 14:31 ` [PATCH v2 15/17] ASoC: fsl: let fsl_ssi work with imx pcm and machine drivers Shawn Guo
2012-03-05 14:31 ` [PATCH v2 16/17] ASoC: fsl: add dt support for imx-audmux Shawn Guo
2012-03-06 12:49 ` Mark Brown
2012-03-06 13:13 ` Shawn Guo
2012-03-05 14:31 ` [PATCH v2 17/17] ASoC: fsl: add imx-sgtl5000 machine driver Shawn Guo
2012-03-05 14:46 ` Mark Brown
2012-03-06 7:39 ` Shawn Guo
2012-03-06 12:02 ` Mark Brown
2012-03-06 13:34 ` Shawn Guo
2012-03-06 13:35 ` Mark Brown
2012-03-05 17:42 ` Sascha Hauer
2012-03-05 18:09 ` Matt Sealey
2012-03-05 19:32 ` Sascha Hauer
2012-03-05 20:44 ` Mark Brown
2012-03-05 21:08 ` Timur Tabi
2012-03-06 15:50 ` Shawn Guo
2012-03-07 8:37 ` Sascha Hauer
2012-03-07 21:05 ` [PATCH v2 00/17] ASoC: add imx-sgtl5000 machine driver working with fsl_ssi Timur Tabi
2012-03-07 21:08 ` Mark Brown
2012-03-07 23:03 ` Timur Tabi
2012-03-08 11:51 ` Mark Brown
2012-03-08 12:33 ` Shawn Guo
2012-03-08 12:36 ` Tabi Timur-B04825
2012-03-07 23:18 ` Timur Tabi
2012-03-08 12:02 ` Mark Brown
2012-03-08 12:37 ` Shawn Guo
2012-03-08 13:11 ` Shawn Guo
2012-03-08 14:45 ` Tabi Timur-B04825
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1330957865-19085-5-git-send-email-shawn.guo@linaro.org \
--to=shawn.guo@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).