From mboxrd@z Thu Jan 1 00:00:00 1970 From: paul.gortmaker@windriver.com (Paul Gortmaker) Date: Mon, 5 Mar 2012 17:41:50 -0500 Subject: [PATCH 3/3] arm: more fallout from i2c conversions in board-omap4panda.c In-Reply-To: <1330987310-8108-1-git-send-email-paul.gortmaker@windriver.com> References: <1330987310-8108-1-git-send-email-paul.gortmaker@windriver.com> Message-ID: <1330987310-8108-4-git-send-email-paul.gortmaker@windriver.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Commit ded0df8510778a03a2f182a0cbfe3c25788e8852 (linux-next) "mfd: Convert twl6040 to an i2c driver, and separate it from twl core" appears to have done an incomplete conversion on the board-omap4panda.c file, leaving it with more build failures. Comparing the changes that were done for board-4430sdp.c it is possible for me to whack it with a stick until it stops twitching, but someone who really understands this code needs to take a look at the conversion, and check it is done completely and in a way that will actually work on hardware. Signed-off-by: Paul Gortmaker CC: Peter Ujfalusi CC: Mark Brown CC: Samuel Ortiz --- arch/arm/mach-omap2/board-omap4panda.c | 5 ++--- 1 files changed, 2 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index e919153..16a1814 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -287,16 +287,15 @@ static struct twl6040_codec_data twl6040_codec = { .hf_right_step = 0x1d, }; -static struct twl4030_audio_data twl6040_audio = { +static struct twl6040_platform_data twl6040_data = { .codec = &twl6040_codec, .audpwron_gpio = 127, - .naudint_irq = OMAP44XX_IRQ_SYS_2N, .irq_base = TWL6040_CODEC_IRQ_BASE, }; /* Panda board uses the common PMIC configuration */ static struct twl4030_platform_data omap4_panda_twldata = { - .audio = &twl6040_audio, + /* .audio = &twl6040_audio, */ }; /* -- 1.7.9.1