* [PATCH v2 0/3] ARM/ASoC: OMAP McBSP: Correct CLKR/FSR source selection
@ 2012-03-08 9:22 Peter Ujfalusi
2012-03-08 9:22 ` [PATCH v2 1/3] ARM: OMAP2+: McBSP: Correct CLKR/FSR clock source mux configuration Peter Ujfalusi
` (2 more replies)
0 siblings, 3 replies; 9+ messages in thread
From: Peter Ujfalusi @ 2012-03-08 9:22 UTC (permalink / raw)
To: linux-arm-kernel
Hello,
Changes since v1:
- Adapted to the moved mcbsp code which helped to reduce the number of patches
from 5 to 3.
- Clock selection related defines moved from arch to ASoC header.
No change in functionality otherwise.
This series fixes the CLKR/FSR mux selection (on McBSP ports with 6 pin setup).
OMAP2/3 has 6 pin setup on McBSP1 port while OMAP4 has the 6 pin setup on McBSP4
port.
Add support for OMAP4 CLKR/FSR source selection, and simplify the ASoC part of
CLK mux configuration.
This series should go via ASoC with the rest of McBSP changes.
Regards,
Peter
---
Peter Ujfalusi (3):
ARM: OMAP2+: McBSP: Correct CLKR/FSR clock source mux configuration
ARM/ASoC: OMAP McBSP: Move remainig defines from arch to ASoC header
ASoC: omap-mcbsp: Single function CLKR/FSR source mux configuration
arch/arm/mach-omap2/mcbsp.c | 46 ++++++++++++++++++++++++++++-
arch/arm/plat-omap/include/plat/mcbsp.h | 12 --------
sound/soc/omap/mcbsp.c | 48 ++++++++++++++----------------
sound/soc/omap/mcbsp.h | 13 +++++++-
sound/soc/omap/omap-mcbsp.c | 8 ++--
5 files changed, 81 insertions(+), 46 deletions(-)
--
1.7.8.5
^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH v2 1/3] ARM: OMAP2+: McBSP: Correct CLKR/FSR clock source mux configuration
2012-03-08 9:22 [PATCH v2 0/3] ARM/ASoC: OMAP McBSP: Correct CLKR/FSR source selection Peter Ujfalusi
@ 2012-03-08 9:22 ` Peter Ujfalusi
2012-03-08 21:12 ` Tony Lindgren
2012-03-08 9:22 ` [PATCH v2 2/3] ARM/ASoC: OMAP McBSP: Move remainig defines from arch to ASoC header Peter Ujfalusi
2012-03-08 9:22 ` [PATCH v2 3/3] ASoC: omap-mcbsp: Single function CLKR/FSR source mux configuration Peter Ujfalusi
2 siblings, 1 reply; 9+ messages in thread
From: Peter Ujfalusi @ 2012-03-08 9:22 UTC (permalink / raw)
To: linux-arm-kernel
On OMAP2/3 McBSP1 port has 6 pin setup, while on OMAP4 the port is McBSP4.
Implement the CLKR/FSR clock mux selection for OMAP4, and make sure that
we add the correct callback for the correct port across supported OMAP
versions.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
---
arch/arm/mach-omap2/mcbsp.c | 46 +++++++++++++++++++++++++++++++++++++++++-
1 files changed, 44 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c
index 49ff5b8..ecc039e 100644
--- a/arch/arm/mach-omap2/mcbsp.c
+++ b/arch/arm/mach-omap2/mcbsp.c
@@ -34,7 +34,7 @@
#include "cm2xxx_3xxx.h"
#include "cm-regbits-34xx.h"
-/* McBSP internal signal muxing function */
+/* McBSP1 internal signal muxing function for OMAP2/3 */
static int omap2_mcbsp1_mux_rx_clk(struct device *dev, const char *signal,
const char *src)
{
@@ -65,6 +65,42 @@ static int omap2_mcbsp1_mux_rx_clk(struct device *dev, const char *signal,
return 0;
}
+/* McBSP4 internal signal muxing function for OMAP4 */
+#define OMAP4_CONTROL_MCBSPLP_ALBCTRLRX_FSX (1 << 31)
+#define OMAP4_CONTROL_MCBSPLP_ALBCTRLRX_CLKX (1 << 30)
+static int omap4_mcbsp4_mux_rx_clk(struct device *dev, const char *signal,
+ const char *src)
+{
+ u32 v;
+
+ /*
+ * In CONTROL_MCBSPLP register only bit 30 (CLKR mux), and bit 31 (FSR
+ * mux) is used */
+ v = omap4_ctrl_pad_readl(OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_MCBSPLP);
+
+ if (!strcmp(signal, "clkr")) {
+ if (!strcmp(src, "clkr"))
+ v &= ~OMAP4_CONTROL_MCBSPLP_ALBCTRLRX_CLKX;
+ else if (!strcmp(src, "clkx"))
+ v |= OMAP4_CONTROL_MCBSPLP_ALBCTRLRX_CLKX;
+ else
+ return -EINVAL;
+ } else if (!strcmp(signal, "fsr")) {
+ if (!strcmp(src, "fsr"))
+ v &= ~OMAP4_CONTROL_MCBSPLP_ALBCTRLRX_FSX;
+ else if (!strcmp(src, "fsx"))
+ v |= OMAP4_CONTROL_MCBSPLP_ALBCTRLRX_FSX;
+ else
+ return -EINVAL;
+ } else {
+ return -EINVAL;
+ }
+
+ omap4_ctrl_pad_writel(v, OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_MCBSPLP);
+
+ return 0;
+}
+
/* McBSP CLKS source switching function */
static int omap2_mcbsp_set_clk_src(struct device *dev, struct clk *clk,
const char *src)
@@ -146,9 +182,15 @@ static int omap_init_mcbsp(struct omap_hwmod *oh, void *unused)
pdata->has_ccr = true;
}
pdata->set_clk_src = omap2_mcbsp_set_clk_src;
- if (id == 1)
+
+ /* On OMAP2/3 the McBSP1 port has 6 pin configuration */
+ if (id == 1 && oh->class->rev < MCBSP_CONFIG_TYPE4)
pdata->mux_signal = omap2_mcbsp1_mux_rx_clk;
+ /* On OMAP4 the McBSP4 port has 6 pin configuration */
+ if (id == 4 && oh->class->rev == MCBSP_CONFIG_TYPE4)
+ pdata->mux_signal = omap4_mcbsp4_mux_rx_clk;
+
if (oh->class->rev == MCBSP_CONFIG_TYPE3) {
if (id == 2)
/* The FIFO has 1024 + 256 locations */
--
1.7.8.5
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH v2 2/3] ARM/ASoC: OMAP McBSP: Move remainig defines from arch to ASoC header
2012-03-08 9:22 [PATCH v2 0/3] ARM/ASoC: OMAP McBSP: Correct CLKR/FSR source selection Peter Ujfalusi
2012-03-08 9:22 ` [PATCH v2 1/3] ARM: OMAP2+: McBSP: Correct CLKR/FSR clock source mux configuration Peter Ujfalusi
@ 2012-03-08 9:22 ` Peter Ujfalusi
2012-03-08 9:29 ` Peter Ujfalusi
2012-03-08 10:58 ` Mark Brown
2012-03-08 9:22 ` [PATCH v2 3/3] ASoC: omap-mcbsp: Single function CLKR/FSR source mux configuration Peter Ujfalusi
2 siblings, 2 replies; 9+ messages in thread
From: Peter Ujfalusi @ 2012-03-08 9:22 UTC (permalink / raw)
To: linux-arm-kernel
Clock signal muxing, and functional clock related defines are only needed
in ASoC drivers.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
---
arch/arm/plat-omap/include/plat/mcbsp.h | 12 ------------
sound/soc/omap/mcbsp.h | 12 ++++++++++++
2 files changed, 12 insertions(+), 12 deletions(-)
diff --git a/arch/arm/plat-omap/include/plat/mcbsp.h b/arch/arm/plat-omap/include/plat/mcbsp.h
index 8eb9b0e..1881412 100644
--- a/arch/arm/plat-omap/include/plat/mcbsp.h
+++ b/arch/arm/plat-omap/include/plat/mcbsp.h
@@ -31,18 +31,6 @@
#define MCBSP_CONFIG_TYPE3 0x3
#define MCBSP_CONFIG_TYPE4 0x4
-/* CLKR signal muxing options */
-#define CLKR_SRC_CLKR 0
-#define CLKR_SRC_CLKX 1
-
-/* FSR signal muxing options */
-#define FSR_SRC_FSR 0
-#define FSR_SRC_FSX 1
-
-/* McBSP functional clock sources */
-#define MCBSP_CLKS_PRCM_SRC 0
-#define MCBSP_CLKS_PAD_SRC 1
-
/* Platform specific configuration */
struct omap_mcbsp_ops {
void (*request)(unsigned int);
diff --git a/sound/soc/omap/mcbsp.h b/sound/soc/omap/mcbsp.h
index a5518d7..acc9470 100644
--- a/sound/soc/omap/mcbsp.h
+++ b/sound/soc/omap/mcbsp.h
@@ -230,6 +230,18 @@ enum {
#define XRDYEN BIT(10)
#define XEMPTYEOFEN BIT(14)
+/* CLKR signal muxing options */
+#define CLKR_SRC_CLKR 0
+#define CLKR_SRC_CLKX 1
+
+/* FSR signal muxing options */
+#define FSR_SRC_FSR 0
+#define FSR_SRC_FSX 1
+
+/* McBSP functional clock sources */
+#define MCBSP_CLKS_PRCM_SRC 0
+#define MCBSP_CLKS_PAD_SRC 1
+
/* we don't do multichannel for now */
struct omap_mcbsp_reg_cfg {
u16 spcr2;
--
1.7.8.5
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH v2 3/3] ASoC: omap-mcbsp: Single function CLKR/FSR source mux configuration
2012-03-08 9:22 [PATCH v2 0/3] ARM/ASoC: OMAP McBSP: Correct CLKR/FSR source selection Peter Ujfalusi
2012-03-08 9:22 ` [PATCH v2 1/3] ARM: OMAP2+: McBSP: Correct CLKR/FSR clock source mux configuration Peter Ujfalusi
2012-03-08 9:22 ` [PATCH v2 2/3] ARM/ASoC: OMAP McBSP: Move remainig defines from arch to ASoC header Peter Ujfalusi
@ 2012-03-08 9:22 ` Peter Ujfalusi
2012-03-08 10:59 ` Mark Brown
2 siblings, 1 reply; 9+ messages in thread
From: Peter Ujfalusi @ 2012-03-08 9:22 UTC (permalink / raw)
To: linux-arm-kernel
Use single function for the CLKR/FSR mux configuration.
OMAP2/3 has 6 pin configuration on McBSP1 instance, while on OMAP4
McBSP4 instance have the 6 pin configuration so the omap2_mcbsp1_mux_* is
not correct name for all support OMAP versions
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
---
sound/soc/omap/mcbsp.c | 48 +++++++++++++++++++-----------------------
sound/soc/omap/mcbsp.h | 15 +++++--------
sound/soc/omap/omap-mcbsp.c | 8 +++---
3 files changed, 32 insertions(+), 39 deletions(-)
diff --git a/sound/soc/omap/mcbsp.c b/sound/soc/omap/mcbsp.c
index c3e31de..95413a1 100644
--- a/sound/soc/omap/mcbsp.c
+++ b/sound/soc/omap/mcbsp.c
@@ -687,40 +687,36 @@ int omap2_mcbsp_set_clks_src(struct omap_mcbsp *mcbsp, u8 fck_src_id)
return -EINVAL;
}
-void omap2_mcbsp1_mux_clkr_src(struct omap_mcbsp *mcbsp, u8 mux)
+int omap_mcbsp_6pin_src_mux(struct omap_mcbsp *mcbsp, u8 mux)
{
- const char *src;
-
- if (mcbsp->id != 1)
- return;
+ const char *signal, *src;
+ int ret = 0;
- if (mux == CLKR_SRC_CLKR)
+ switch (mux) {
+ case CLKR_SRC_CLKR:
+ signal = "clkr";
src = "clkr";
- else if (mux == CLKR_SRC_CLKX)
+ break;
+ case CLKR_SRC_CLKX:
+ signal = "clkr";
src = "clkx";
- else
- return;
-
- if (mcbsp->pdata->mux_signal)
- mcbsp->pdata->mux_signal(mcbsp->dev, "clkr", src);
-}
-
-void omap2_mcbsp1_mux_fsr_src(struct omap_mcbsp *mcbsp, u8 mux)
-{
- const char *src;
-
- if (mcbsp->id != 1)
- return;
-
- if (mux == FSR_SRC_FSR)
+ break;
+ case FSR_SRC_FSR:
+ signal = "fsr";
src = "fsr";
- else if (mux == FSR_SRC_FSX)
+ break;
+ case FSR_SRC_FSX:
+ signal = "fsr";
src = "fsx";
- else
- return;
+ break;
+ default:
+ return -EINVAL;
+ }
if (mcbsp->pdata->mux_signal)
- mcbsp->pdata->mux_signal(mcbsp->dev, "fsr", src);
+ ret = mcbsp->pdata->mux_signal(mcbsp->dev, signal, src);
+
+ return ret;
}
#define max_thres(m) (mcbsp->pdata->buffer_size)
diff --git a/sound/soc/omap/mcbsp.h b/sound/soc/omap/mcbsp.h
index acc9470..a944fcc 100644
--- a/sound/soc/omap/mcbsp.h
+++ b/sound/soc/omap/mcbsp.h
@@ -230,13 +230,11 @@ enum {
#define XRDYEN BIT(10)
#define XEMPTYEOFEN BIT(14)
-/* CLKR signal muxing options */
-#define CLKR_SRC_CLKR 0
-#define CLKR_SRC_CLKX 1
-
-/* FSR signal muxing options */
-#define FSR_SRC_FSR 0
-#define FSR_SRC_FSX 1
+/* Clock signal muxing options */
+#define CLKR_SRC_CLKR 0 /* CLKR signal is from the CLKR pin */
+#define CLKR_SRC_CLKX 1 /* CLKR signal is from the CLKX pin */
+#define FSR_SRC_FSR 2 /* FSR signal is from the FSR pin */
+#define FSR_SRC_FSX 3 /* FSR signal is from the FSX pin */
/* McBSP functional clock sources */
#define MCBSP_CLKS_PRCM_SRC 0
@@ -333,8 +331,7 @@ void omap_mcbsp_stop(struct omap_mcbsp *mcbsp, int tx, int rx);
int omap2_mcbsp_set_clks_src(struct omap_mcbsp *mcbsp, u8 fck_src_id);
/* McBSP signal muxing API */
-void omap2_mcbsp1_mux_clkr_src(struct omap_mcbsp *mcbsp, u8 mux);
-void omap2_mcbsp1_mux_fsr_src(struct omap_mcbsp *mcbsp, u8 mux);
+int omap_mcbsp_6pin_src_mux(struct omap_mcbsp *mcbsp, u8 mux);
/* Sidetone specific API */
int omap_st_set_chgain(struct omap_mcbsp *mcbsp, int channel, s16 chgain);
diff --git a/sound/soc/omap/omap-mcbsp.c b/sound/soc/omap/omap-mcbsp.c
index 10eb645..d8409b0 100644
--- a/sound/soc/omap/omap-mcbsp.c
+++ b/sound/soc/omap/omap-mcbsp.c
@@ -554,22 +554,22 @@ static int omap_mcbsp_dai_set_dai_sysclk(struct snd_soc_dai *cpu_dai,
case OMAP_MCBSP_CLKR_SRC_CLKR:
if (cpu_class_is_omap1())
break;
- omap2_mcbsp1_mux_clkr_src(mcbsp, CLKR_SRC_CLKR);
+ err = omap_mcbsp_6pin_src_mux(mcbsp, CLKR_SRC_CLKR);
break;
case OMAP_MCBSP_CLKR_SRC_CLKX:
if (cpu_class_is_omap1())
break;
- omap2_mcbsp1_mux_clkr_src(mcbsp, CLKR_SRC_CLKX);
+ err = omap_mcbsp_6pin_src_mux(mcbsp, CLKR_SRC_CLKX);
break;
case OMAP_MCBSP_FSR_SRC_FSR:
if (cpu_class_is_omap1())
break;
- omap2_mcbsp1_mux_fsr_src(mcbsp, FSR_SRC_FSR);
+ err = omap_mcbsp_6pin_src_mux(mcbsp, FSR_SRC_FSR);
break;
case OMAP_MCBSP_FSR_SRC_FSX:
if (cpu_class_is_omap1())
break;
- omap2_mcbsp1_mux_fsr_src(mcbsp, FSR_SRC_FSX);
+ err = omap_mcbsp_6pin_src_mux(mcbsp, FSR_SRC_FSX);
break;
default:
err = -ENODEV;
--
1.7.8.5
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH v2 2/3] ARM/ASoC: OMAP McBSP: Move remainig defines from arch to ASoC header
2012-03-08 9:22 ` [PATCH v2 2/3] ARM/ASoC: OMAP McBSP: Move remainig defines from arch to ASoC header Peter Ujfalusi
@ 2012-03-08 9:29 ` Peter Ujfalusi
2012-03-08 9:37 ` Jarkko Nikula
2012-03-08 10:58 ` Mark Brown
1 sibling, 1 reply; 9+ messages in thread
From: Peter Ujfalusi @ 2012-03-08 9:29 UTC (permalink / raw)
To: linux-arm-kernel
Hi Jarkko,
On 03/08/2012 11:22 AM, Peter Ujfalusi wrote:
> Clock signal muxing, and functional clock related defines are only needed
> in ASoC drivers.
>
> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
I have added your ack to this patch by accident when I updated the
series. Sorry about that.
Please confirm if you are OK with this change.
Sorry again,
P?ter
> ---
> arch/arm/plat-omap/include/plat/mcbsp.h | 12 ------------
> sound/soc/omap/mcbsp.h | 12 ++++++++++++
> 2 files changed, 12 insertions(+), 12 deletions(-)
>
> diff --git a/arch/arm/plat-omap/include/plat/mcbsp.h b/arch/arm/plat-omap/include/plat/mcbsp.h
> index 8eb9b0e..1881412 100644
> --- a/arch/arm/plat-omap/include/plat/mcbsp.h
> +++ b/arch/arm/plat-omap/include/plat/mcbsp.h
> @@ -31,18 +31,6 @@
> #define MCBSP_CONFIG_TYPE3 0x3
> #define MCBSP_CONFIG_TYPE4 0x4
>
> -/* CLKR signal muxing options */
> -#define CLKR_SRC_CLKR 0
> -#define CLKR_SRC_CLKX 1
> -
> -/* FSR signal muxing options */
> -#define FSR_SRC_FSR 0
> -#define FSR_SRC_FSX 1
> -
> -/* McBSP functional clock sources */
> -#define MCBSP_CLKS_PRCM_SRC 0
> -#define MCBSP_CLKS_PAD_SRC 1
> -
> /* Platform specific configuration */
> struct omap_mcbsp_ops {
> void (*request)(unsigned int);
> diff --git a/sound/soc/omap/mcbsp.h b/sound/soc/omap/mcbsp.h
> index a5518d7..acc9470 100644
> --- a/sound/soc/omap/mcbsp.h
> +++ b/sound/soc/omap/mcbsp.h
> @@ -230,6 +230,18 @@ enum {
> #define XRDYEN BIT(10)
> #define XEMPTYEOFEN BIT(14)
>
> +/* CLKR signal muxing options */
> +#define CLKR_SRC_CLKR 0
> +#define CLKR_SRC_CLKX 1
> +
> +/* FSR signal muxing options */
> +#define FSR_SRC_FSR 0
> +#define FSR_SRC_FSX 1
> +
> +/* McBSP functional clock sources */
> +#define MCBSP_CLKS_PRCM_SRC 0
> +#define MCBSP_CLKS_PAD_SRC 1
> +
> /* we don't do multichannel for now */
> struct omap_mcbsp_reg_cfg {
> u16 spcr2;
^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH v2 2/3] ARM/ASoC: OMAP McBSP: Move remainig defines from arch to ASoC header
2012-03-08 9:29 ` Peter Ujfalusi
@ 2012-03-08 9:37 ` Jarkko Nikula
0 siblings, 0 replies; 9+ messages in thread
From: Jarkko Nikula @ 2012-03-08 9:37 UTC (permalink / raw)
To: linux-arm-kernel
On 03/08/2012 11:29 AM, Peter Ujfalusi wrote:
> Hi Jarkko,
>
> On 03/08/2012 11:22 AM, Peter Ujfalusi wrote:
>> Clock signal muxing, and functional clock related defines are only needed
>> in ASoC drivers.
>>
>> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
>> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
>
> I have added your ack to this patch by accident when I updated the
> series. Sorry about that.
> Please confirm if you are OK with this change.
>
Go ahead :-)
--
Jarkko
^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH v2 2/3] ARM/ASoC: OMAP McBSP: Move remainig defines from arch to ASoC header
2012-03-08 9:22 ` [PATCH v2 2/3] ARM/ASoC: OMAP McBSP: Move remainig defines from arch to ASoC header Peter Ujfalusi
2012-03-08 9:29 ` Peter Ujfalusi
@ 2012-03-08 10:58 ` Mark Brown
1 sibling, 0 replies; 9+ messages in thread
From: Mark Brown @ 2012-03-08 10:58 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, Mar 08, 2012 at 11:22:16AM +0200, Peter Ujfalusi wrote:
> Clock signal muxing, and functional clock related defines are only needed
> in ASoC drivers.
Acked-by: Mark Brown <broonoie@opensource.wolfsonmicro.com>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20120308/74984923/attachment.sig>
^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH v2 3/3] ASoC: omap-mcbsp: Single function CLKR/FSR source mux configuration
2012-03-08 9:22 ` [PATCH v2 3/3] ASoC: omap-mcbsp: Single function CLKR/FSR source mux configuration Peter Ujfalusi
@ 2012-03-08 10:59 ` Mark Brown
0 siblings, 0 replies; 9+ messages in thread
From: Mark Brown @ 2012-03-08 10:59 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, Mar 08, 2012 at 11:22:17AM +0200, Peter Ujfalusi wrote:
> Use single function for the CLKR/FSR mux configuration.
> OMAP2/3 has 6 pin configuration on McBSP1 instance, while on OMAP4
> McBSP4 instance have the 6 pin configuration so the omap2_mcbsp1_mux_* is
> not correct name for all support OMAP versions
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20120308/9d7272e7/attachment.sig>
^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH v2 1/3] ARM: OMAP2+: McBSP: Correct CLKR/FSR clock source mux configuration
2012-03-08 9:22 ` [PATCH v2 1/3] ARM: OMAP2+: McBSP: Correct CLKR/FSR clock source mux configuration Peter Ujfalusi
@ 2012-03-08 21:12 ` Tony Lindgren
0 siblings, 0 replies; 9+ messages in thread
From: Tony Lindgren @ 2012-03-08 21:12 UTC (permalink / raw)
To: linux-arm-kernel
* Peter Ujfalusi <peter.ujfalusi@ti.com> [120308 00:50]:
> On OMAP2/3 McBSP1 port has 6 pin setup, while on OMAP4 the port is McBSP4.
> Implement the CLKR/FSR clock mux selection for OMAP4, and make sure that
> we add the correct callback for the correct port across supported OMAP
> versions.
>
> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Acked-by: Tony Lindgren <tony@atomide.com>
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2012-03-08 21:12 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-03-08 9:22 [PATCH v2 0/3] ARM/ASoC: OMAP McBSP: Correct CLKR/FSR source selection Peter Ujfalusi
2012-03-08 9:22 ` [PATCH v2 1/3] ARM: OMAP2+: McBSP: Correct CLKR/FSR clock source mux configuration Peter Ujfalusi
2012-03-08 21:12 ` Tony Lindgren
2012-03-08 9:22 ` [PATCH v2 2/3] ARM/ASoC: OMAP McBSP: Move remainig defines from arch to ASoC header Peter Ujfalusi
2012-03-08 9:29 ` Peter Ujfalusi
2012-03-08 9:37 ` Jarkko Nikula
2012-03-08 10:58 ` Mark Brown
2012-03-08 9:22 ` [PATCH v2 3/3] ASoC: omap-mcbsp: Single function CLKR/FSR source mux configuration Peter Ujfalusi
2012-03-08 10:59 ` Mark Brown
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).