From: hvaibhav@ti.com (Vaibhav Hiremath)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH-V3 2/3] ARM: OMAP2+: powerdomain: Add offset & mask fields to struct powerdomain
Date: Thu, 15 Mar 2012 16:36:25 +0530 [thread overview]
Message-ID: <1331809586-24652-3-git-send-email-hvaibhav@ti.com> (raw)
In-Reply-To: <1331809586-24652-1-git-send-email-hvaibhav@ti.com>
In case of AM33xx device, there is no consistency between
PWRSTCTRL & PWRSTST register offsets in PRM space, for example -
PRM_XXX PWRSTCTRL PWRSTST
=======================================
PRM_PER_MOD: 0x0C, 0x08
PRM_WKUP_MOD: 0x04, 0x08
PRM_MPU_MOD: 0x00, 0x04
PRM_DEVICE_MOD: NA, NA
And also, there is no consistency between bit-offsets inside
PWRSTCTRL & PWRSTST register, for example -
PRM_XXX LOGICRET MEMON MEMRET
=========================================
GFX_PWRCTRL: 2, 17, 6
PER_PWRCTRL: 3, 25, 29
MPU_PWRCTRL: 2, 18, 22
WKUP_PWRCTRL: 3, NA, NA
This means, we need to maintain and pass on all this information
through powerdomain handle; so adding fields for,
- PWRSTCTRL/ST register offset
- Logic retention state mask
- mem_on/ret/pwrst/retst mask
Currently, this fields is only applicable and used for AM33XX devices.
Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Benoit Cousson <b-cousson@ti.com>
Cc: Kevin Hilman <khilman@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
---
arch/arm/mach-omap2/powerdomain.h | 17 +++++++++++++++++
1 files changed, 17 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-omap2/powerdomain.h b/arch/arm/mach-omap2/powerdomain.h
index 0d72a8a..8fc50b2 100644
--- a/arch/arm/mach-omap2/powerdomain.h
+++ b/arch/arm/mach-omap2/powerdomain.h
@@ -92,6 +92,15 @@ struct powerdomain;
* @pwrdm_clkdms: Clockdomains in this powerdomain
* @node: list_head linking all powerdomains
* @voltdm_node: list_head linking all powerdomains in a voltagedomain
+ * @pwrstctrl_offs: (AM33XX only) XXX_PWRSTCTRL reg offset from prcm_offs
+ * @pwrstst_offs: (AM33XX only) XXX_PWRSTST reg offset from prcm_offs
+ * @logicretstate_mask: (AM33XX only) mask for logic retention bitfield
+ * in @pwrstctrl_offs
+ * @mem_on_mask: (AM33XX only) mask for mem on bitfield in @pwrstctrl_offs
+ * @mem_ret_mask: (AM33XX only) mask for mem retention bitfield in @pwrstctrl_offs
+ * @mem_pwrst_mask: (AM33XX only) mask for mem state bitfield in @pwrstst_offs
+ * @mem_retst_mask: (AM33XX only) mask for mem retention state bitfield
+ * in @pwrstctrl_offs
* @state:
* @state_counter:
* @timer:
@@ -121,6 +130,14 @@ struct powerdomain {
unsigned ret_logic_off_counter;
unsigned ret_mem_off_counter[PWRDM_MAX_MEM_BANKS];
+ const u8 pwrstctrl_offs;
+ const u8 pwrstst_offs;
+ const u32 logicretstate_mask;
+ const u32 mem_on_mask[PWRDM_MAX_MEM_BANKS];
+ const u32 mem_ret_mask[PWRDM_MAX_MEM_BANKS];
+ const u32 mem_pwrst_mask[PWRDM_MAX_MEM_BANKS];
+ const u32 mem_retst_mask[PWRDM_MAX_MEM_BANKS];
+
#ifdef CONFIG_PM_DEBUG
s64 timer;
s64 state_timer[PWRDM_MAX_PWRSTS];
--
1.7.0.4
next prev parent reply other threads:[~2012-03-15 11:06 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-03-15 11:06 [PATCH-V3 0/3] ARM: OMAP2+: Add powerdomain & PRM support for AM33XX device Vaibhav Hiremath
2012-03-15 11:06 ` [PATCH-V3 1/3] ARM: OMAP3/4: omap_hwmod: Add rstst_off field to struct omap_hwmod_omap4_prcm Vaibhav Hiremath
2012-03-15 11:06 ` Vaibhav Hiremath [this message]
2012-03-15 11:06 ` [PATCH-V3 3/3] ARM: OMAP3+: am33xx: Add powerdomain & PRM support Vaibhav Hiremath
2012-03-29 18:03 ` [PATCH-V3 0/3] ARM: OMAP2+: Add powerdomain & PRM support for AM33XX device Kevin Hilman
2012-03-30 7:13 ` Hiremath, Vaibhav
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1331809586-24652-3-git-send-email-hvaibhav@ti.com \
--to=hvaibhav@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).