* [PATCH 1/2] omap1/board-files: fix OMAP_GPIO_IRQ usage with gpio_to_irq()
2012-03-16 12:24 [PATCH 0/2] omap: board file changes to support dynamic irq alloc Tarun Kanti DebBarma
@ 2012-03-16 12:24 ` Tarun Kanti DebBarma
2012-03-16 12:24 ` [PATCH 2/2] omap2plus/board-files: " Tarun Kanti DebBarma
2012-03-16 13:46 ` [PATCH 0/2] omap: board file changes to support dynamic irq alloc Cousson, Benoit
2 siblings, 0 replies; 5+ messages in thread
From: Tarun Kanti DebBarma @ 2012-03-16 12:24 UTC (permalink / raw)
To: linux-arm-kernel
With dynamic allocation of IRQ the usage of OMAP_GPIO_IRQ
is no longer valid. We should be using gpio_to_irq() instead.
Signed-off-by: Tarun Kanti DebBarma <tarun.kanti@ti.com>
---
arch/arm/mach-omap1/board-h2.c | 8 ++++----
arch/arm/mach-omap1/board-h3.c | 8 ++++----
arch/arm/mach-omap1/board-htcherald.c | 6 +++---
arch/arm/mach-omap1/board-innovator.c | 4 ++--
arch/arm/mach-omap1/board-nokia770.c | 1 +
arch/arm/mach-omap1/board-osk.c | 12 ++++++------
arch/arm/mach-omap1/board-palmte.c | 2 +-
arch/arm/mach-omap1/board-palmtt.c | 2 +-
arch/arm/mach-omap1/board-palmz71.c | 2 +-
arch/arm/mach-omap1/board-voiceblue.c | 16 +++++++---------
10 files changed, 30 insertions(+), 31 deletions(-)
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index 00ad6b2..ad0eece 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -244,8 +244,6 @@ static struct resource h2_smc91x_resources[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = OMAP_GPIO_IRQ(0),
- .end = OMAP_GPIO_IRQ(0),
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
},
};
@@ -364,11 +362,9 @@ static struct tps65010_board tps_board = {
static struct i2c_board_info __initdata h2_i2c_board_info[] = {
{
I2C_BOARD_INFO("tps65010", 0x48),
- .irq = OMAP_GPIO_IRQ(58),
.platform_data = &tps_board,
}, {
I2C_BOARD_INFO("isp1301_omap", 0x2d),
- .irq = OMAP_GPIO_IRQ(2),
},
};
@@ -437,10 +433,14 @@ static void __init h2_init(void)
omap_cfg_reg(E19_1610_KBR4);
omap_cfg_reg(N19_1610_KBR5);
+ h2_devices[2]->resource[1].start = gpio_to_irq(0);
+ h2_devices[2]->resource[1].end = gpio_to_irq(0);
platform_add_devices(h2_devices, ARRAY_SIZE(h2_devices));
omap_board_config = h2_config;
omap_board_config_size = ARRAY_SIZE(h2_config);
omap_serial_init();
+ h2_i2c_board_info[0].irq = gpio_to_irq(58);
+ h2_i2c_board_info[1].irq = gpio_to_irq(2);
omap_register_i2c_bus(1, 100, h2_i2c_board_info,
ARRAY_SIZE(h2_i2c_board_info));
omap1_usb_init(&h2_usb_config);
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index 4a7f251..692b16d 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -246,8 +246,6 @@ static struct resource smc91x_resources[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = OMAP_GPIO_IRQ(40),
- .end = OMAP_GPIO_IRQ(40),
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
},
};
@@ -337,7 +335,6 @@ static struct spi_board_info h3_spi_board_info[] __initdata = {
.modalias = "tsc2101",
.bus_num = 2,
.chip_select = 0,
- .irq = OMAP_GPIO_IRQ(H3_TS_GPIO),
.max_speed_hz = 16000000,
/* .platform_data = &tsc_platform_data, */
},
@@ -381,7 +378,6 @@ static struct i2c_board_info __initdata h3_i2c_board_info[] = {
},
{
I2C_BOARD_INFO("isp1301_omap", 0x2d),
- .irq = OMAP_GPIO_IRQ(14),
},
};
@@ -423,12 +419,16 @@ static void __init h3_init(void)
omap_cfg_reg(E19_1610_KBR4);
omap_cfg_reg(N19_1610_KBR5);
+ devices[2]->resource[1].start = gpio_to_irq(40);
+ devices[2]->resource[1].end = gpio_to_irq(40);
platform_add_devices(devices, ARRAY_SIZE(devices));
+ h3_spi_board_info[0].irq = gpio_to_irq(H3_TS_GPIO);
spi_register_board_info(h3_spi_board_info,
ARRAY_SIZE(h3_spi_board_info));
omap_board_config = h3_config;
omap_board_config_size = ARRAY_SIZE(h3_config);
omap_serial_init();
+ h3_i2c_board_info[1].irq = gpio_to_irq(14);
omap_register_i2c_bus(1, 100, h3_i2c_board_info,
ARRAY_SIZE(h3_i2c_board_info));
omap1_usb_init(&h3_usb_config);
diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c
index 731cc3d..766b1e3 100644
--- a/arch/arm/mach-omap1/board-htcherald.c
+++ b/arch/arm/mach-omap1/board-htcherald.c
@@ -324,8 +324,6 @@ static struct platform_device gpio_leds_device = {
static struct resource htcpld_resources[] = {
[0] = {
- .start = OMAP_GPIO_IRQ(HTCHERALD_GIRQ_BTNS),
- .end = OMAP_GPIO_IRQ(HTCHERALD_GIRQ_BTNS),
.flags = IORESOURCE_IRQ,
},
};
@@ -454,7 +452,6 @@ static struct spi_board_info __initdata htcherald_spi_board_info[] = {
{
.modalias = "ads7846",
.platform_data = &htcherald_ts_platform_data,
- .irq = OMAP_GPIO_IRQ(HTCHERALD_GPIO_TS),
.max_speed_hz = 2500000,
.bus_num = 2,
.chip_select = 1,
@@ -582,6 +579,8 @@ static void __init htcherald_init(void)
/* Do board initialization before we register all the devices */
omap_board_config = htcherald_config;
omap_board_config_size = ARRAY_SIZE(htcherald_config);
+ devices[2]->resource[0].start = gpio_to_irq(HTCHERALD_GIRQ_BTNS);
+ devices[2]->resource[0].end = gpio_to_irq(HTCHERALD_GIRQ_BTNS);
platform_add_devices(devices, ARRAY_SIZE(devices));
htcherald_disable_watchdog();
@@ -589,6 +588,7 @@ static void __init htcherald_init(void)
htcherald_usb_enable();
omap1_usb_init(&htcherald_usb_config);
+ htcherald_spi_board_info[0].irq = gpio_to_irq(HTCHERALD_GPIO_TS);
spi_register_board_info(htcherald_spi_board_info,
ARRAY_SIZE(htcherald_spi_board_info));
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index be2002f..965f3d7 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -244,8 +244,6 @@ static struct resource innovator1610_smc91x_resources[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = OMAP_GPIO_IRQ(0),
- .end = OMAP_GPIO_IRQ(0),
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
},
};
@@ -409,6 +407,8 @@ static void __init innovator_init(void)
#endif
#ifdef CONFIG_ARCH_OMAP16XX
if (!cpu_is_omap1510()) {
+ innovator1610_devices[1]->resource[1].start = gpio_to_irq(0);
+ innovator1610_devices[1]->resource[1].end = gpio_to_irq(0);
platform_add_devices(innovator1610_devices, ARRAY_SIZE(innovator1610_devices));
}
#endif
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index f9efc03..c0b3ce7 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -240,6 +240,7 @@ static void __init omap_nokia770_init(void)
omap_writew((omap_readw(0xfffb5004) & ~2), 0xfffb5004);
platform_add_devices(nokia770_devices, ARRAY_SIZE(nokia770_devices));
+ nokia770_spi_board_info[1].irq = gpio_to_irq(15);
spi_register_board_info(nokia770_spi_board_info,
ARRAY_SIZE(nokia770_spi_board_info));
omap_serial_init();
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index 675de06..6791887 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -129,8 +129,6 @@ static struct resource osk5912_smc91x_resources[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = OMAP_GPIO_IRQ(0),
- .end = OMAP_GPIO_IRQ(0),
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
},
};
@@ -147,8 +145,6 @@ static struct platform_device osk5912_smc91x_device = {
static struct resource osk5912_cf_resources[] = {
[0] = {
- .start = OMAP_GPIO_IRQ(62),
- .end = OMAP_GPIO_IRQ(62),
.flags = IORESOURCE_IRQ,
},
};
@@ -240,7 +236,6 @@ static struct tps65010_board tps_board = {
static struct i2c_board_info __initdata osk_i2c_board_info[] = {
{
I2C_BOARD_INFO("tps65010", 0x48),
- .irq = OMAP_GPIO_IRQ(OMAP_MPUIO(1)),
.platform_data = &tps_board,
},
@@ -414,7 +409,6 @@ static struct spi_board_info __initdata mistral_boardinfo[] = { {
/* MicroWire (bus 2) CS0 has an ads7846e */
.modalias = "ads7846",
.platform_data = &mistral_ts_info,
- .irq = OMAP_GPIO_IRQ(4),
.max_speed_hz = 120000 /* max sample rate at 3V */
* 26 /* command + data + overhead */,
.bus_num = 2,
@@ -477,6 +471,7 @@ static void __init osk_mistral_init(void)
gpio_direction_input(4);
irq_set_irq_type(gpio_to_irq(4), IRQ_TYPE_EDGE_FALLING);
+ mistral_boardinfo[0].irq = gpio_to_irq(4);
spi_register_board_info(mistral_boardinfo,
ARRAY_SIZE(mistral_boardinfo));
@@ -548,6 +543,10 @@ static void __init osk_init(void)
osk_flash_resource.end = osk_flash_resource.start = omap_cs3_phys();
osk_flash_resource.end += SZ_32M - 1;
+ osk5912_devices[1]->resource[1].start = gpio_to_irq(0);
+ osk5912_devices[1]->resource[1].end = gpio_to_irq(0);
+ osk5912_devices[2]->resource[0].start = gpio_to_irq(62);
+ osk5912_devices[2]->resource[0].end = gpio_to_irq(62);
platform_add_devices(osk5912_devices, ARRAY_SIZE(osk5912_devices));
omap_board_config = osk_config;
omap_board_config_size = ARRAY_SIZE(osk_config);
@@ -564,6 +563,7 @@ static void __init osk_init(void)
gpio_direction_input(OMAP_MPUIO(1));
omap_serial_init();
+ osk_i2c_board_info[0].irq = gpio_to_irq(OMAP_MPUIO(1));
omap_register_i2c_bus(1, 400, osk_i2c_board_info,
ARRAY_SIZE(osk_i2c_board_info));
osk_mistral_init();
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index 81fa27f..108c7d1 100644
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -218,7 +218,6 @@ static struct spi_board_info palmte_spi_info[] __initdata = {
.modalias = "tsc2102",
.bus_num = 2, /* uWire (officially) */
.chip_select = 0, /* As opposed to 3 */
- .irq = OMAP_GPIO_IRQ(PALMTE_PINTDAV_GPIO),
.max_speed_hz = 8000000,
},
};
@@ -255,6 +254,7 @@ static void __init omap_palmte_init(void)
platform_add_devices(palmte_devices, ARRAY_SIZE(palmte_devices));
+ palmte_spi_info[0].irq = gpio_to_irq(PALMTE_PINTDAV_GPIO);
spi_register_board_info(palmte_spi_info, ARRAY_SIZE(palmte_spi_info));
palmte_misc_gpio_setup();
omap_serial_init();
diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c
index 81cb821..b87a92f 100644
--- a/arch/arm/mach-omap1/board-palmtt.c
+++ b/arch/arm/mach-omap1/board-palmtt.c
@@ -255,7 +255,6 @@ static struct spi_board_info __initdata palmtt_boardinfo[] = {
/* MicroWire (bus 2) CS0 has an ads7846e */
.modalias = "ads7846",
.platform_data = &palmtt_ts_info,
- .irq = OMAP_GPIO_IRQ(6),
.max_speed_hz = 120000 /* max sample rate at 3V */
* 26 /* command + data + overhead */,
.bus_num = 2,
@@ -303,6 +302,7 @@ static void __init omap_palmtt_init(void)
platform_add_devices(palmtt_devices, ARRAY_SIZE(palmtt_devices));
+ palmtt_boardinfo[0].irq = gpio_to_irq(6);
spi_register_board_info(palmtt_boardinfo,ARRAY_SIZE(palmtt_boardinfo));
omap_serial_init();
omap1_usb_init(&palmtt_usb_config);
diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
index e881945..0ff25fa 100644
--- a/arch/arm/mach-omap1/board-palmz71.c
+++ b/arch/arm/mach-omap1/board-palmz71.c
@@ -222,7 +222,6 @@ static struct spi_board_info __initdata palmz71_boardinfo[] = { {
/* MicroWire (bus 2) CS0 has an ads7846e */
.modalias = "ads7846",
.platform_data = &palmz71_ts_info,
- .irq = OMAP_GPIO_IRQ(PALMZ71_PENIRQ_GPIO),
.max_speed_hz = 120000 /* max sample rate at 3V */
* 26 /* command + data + overhead */,
.bus_num = 2,
@@ -318,6 +317,7 @@ omap_palmz71_init(void)
platform_add_devices(devices, ARRAY_SIZE(devices));
+ palmz71_boardinfo[0].irq = gpio_to_irq(PALMZ71_PENIRQ_GPIO);
spi_register_board_info(palmz71_boardinfo,
ARRAY_SIZE(palmz71_boardinfo));
omap1_usb_init(&palmz71_usb_config);
diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c
index f83a502..63732fe 100644
--- a/arch/arm/mach-omap1/board-voiceblue.c
+++ b/arch/arm/mach-omap1/board-voiceblue.c
@@ -42,7 +42,6 @@
static struct plat_serial8250_port voiceblue_ports[] = {
{
.mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x40000),
- .irq = OMAP_GPIO_IRQ(12),
.flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
.iotype = UPIO_MEM,
.regshift = 1,
@@ -50,7 +49,6 @@ static struct plat_serial8250_port voiceblue_ports[] = {
},
{
.mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x50000),
- .irq = OMAP_GPIO_IRQ(13),
.flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
.iotype = UPIO_MEM,
.regshift = 1,
@@ -58,7 +56,6 @@ static struct plat_serial8250_port voiceblue_ports[] = {
},
{
.mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x60000),
- .irq = OMAP_GPIO_IRQ(14),
.flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
.iotype = UPIO_MEM,
.regshift = 1,
@@ -66,7 +63,6 @@ static struct plat_serial8250_port voiceblue_ports[] = {
},
{
.mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x70000),
- .irq = OMAP_GPIO_IRQ(15),
.flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
.iotype = UPIO_MEM,
.regshift = 1,
@@ -78,9 +74,6 @@ static struct plat_serial8250_port voiceblue_ports[] = {
static struct platform_device serial_device = {
.name = "serial8250",
.id = PLAT8250_DEV_PLATFORM1,
- .dev = {
- .platform_data = voiceblue_ports,
- },
};
static int __init ext_uart_init(void)
@@ -88,6 +81,11 @@ static int __init ext_uart_init(void)
if (!machine_is_voiceblue())
return -ENODEV;
+ voiceblue_ports[0].irq = gpio_to_irq(12);
+ voiceblue_ports[1].irq = gpio_to_irq(13);
+ voiceblue_ports[2].irq = gpio_to_irq(14);
+ voiceblue_ports[3].irq = gpio_to_irq(15);
+ serial_device.dev.platform_data = voiceblue_ports;
return platform_device_register(&serial_device);
}
arch_initcall(ext_uart_init);
@@ -126,8 +124,6 @@ static struct resource voiceblue_smc91x_resources[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = OMAP_GPIO_IRQ(8),
- .end = OMAP_GPIO_IRQ(8),
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
},
};
@@ -273,6 +269,8 @@ static void __init voiceblue_init(void)
irq_set_irq_type(gpio_to_irq(14), IRQ_TYPE_EDGE_RISING);
irq_set_irq_type(gpio_to_irq(15), IRQ_TYPE_EDGE_RISING);
+ voiceblue_devices[1]->resource[1].start = gpio_to_irq(8);
+ voiceblue_devices[1]->resource[1].end = gpio_to_irq(8);
platform_add_devices(voiceblue_devices, ARRAY_SIZE(voiceblue_devices));
omap_board_config = voiceblue_config;
omap_board_config_size = ARRAY_SIZE(voiceblue_config);
--
1.7.0.4
^ permalink raw reply related [flat|nested] 5+ messages in thread* [PATCH 2/2] omap2plus/board-files: fix OMAP_GPIO_IRQ usage with gpio_to_irq()
2012-03-16 12:24 [PATCH 0/2] omap: board file changes to support dynamic irq alloc Tarun Kanti DebBarma
2012-03-16 12:24 ` [PATCH 1/2] omap1/board-files: fix OMAP_GPIO_IRQ usage with gpio_to_irq() Tarun Kanti DebBarma
@ 2012-03-16 12:24 ` Tarun Kanti DebBarma
2012-03-16 13:46 ` [PATCH 0/2] omap: board file changes to support dynamic irq alloc Cousson, Benoit
2 siblings, 0 replies; 5+ messages in thread
From: Tarun Kanti DebBarma @ 2012-03-16 12:24 UTC (permalink / raw)
To: linux-arm-kernel
With dynamic allocation of IRQ the usage of OMAP_GPIO_IRQi
is no longer valid. We should be using gpio_to_irq() instead.
Signed-off-by: Tarun Kanti DebBarma <tarun.kanti@ti.com>
---
arch/arm/mach-omap2/board-2430sdp.c | 2 +-
arch/arm/mach-omap2/board-4430sdp.c | 2 +-
arch/arm/mach-omap2/board-apollon.c | 6 ++++--
arch/arm/mach-omap2/board-devkit8000.c | 3 ++-
arch/arm/mach-omap2/board-h4.c | 2 +-
arch/arm/mach-omap2/board-omap3evm.c | 2 +-
arch/arm/mach-omap2/board-omap4panda.c | 2 +-
arch/arm/mach-omap2/board-rx51-peripherals.c | 3 ++-
arch/arm/mach-omap2/board-zoom-debugboard.c | 3 ++-
arch/arm/mach-omap2/board-zoom-peripherals.c | 6 ++++--
arch/arm/mach-omap2/common-board-devices.c | 2 +-
11 files changed, 20 insertions(+), 13 deletions(-)
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index 7370983..5a1b6af 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -230,12 +230,12 @@ static struct i2c_board_info __initdata sdp2430_i2c1_boardinfo[] = {
{
I2C_BOARD_INFO("isp1301_omap", 0x2D),
.flags = I2C_CLIENT_WAKE,
- .irq = OMAP_GPIO_IRQ(78),
},
};
static int __init omap2430_i2c_init(void)
{
+ sdp2430_i2c1_boardinfo[0].irq = gpio_to_irq(78);
omap_register_i2c_bus(1, 100, sdp2430_i2c1_boardinfo,
ARRAY_SIZE(sdp2430_i2c1_boardinfo));
omap_pmic_init(2, 100, "twl4030", INT_24XX_SYS_NIRQ,
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index 4e90715..a09c699 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -873,7 +873,6 @@ static void __init omap4_sdp4430_wifi_mux_init(void)
}
static struct wl12xx_platform_data omap4_sdp4430_wlan_data __initdata = {
- .irq = OMAP_GPIO_IRQ(GPIO_WIFI_IRQ),
.board_ref_clock = WL12XX_REFCLOCK_26,
.board_tcxo_clock = WL12XX_TCXOCLOCK_26,
};
@@ -883,6 +882,7 @@ static void __init omap4_sdp4430_wifi_init(void)
int ret;
omap4_sdp4430_wifi_mux_init();
+ omap4_sdp4430_wlan_data.irq = gpio_to_irq(GPIO_WIFI_IRQ);
ret = wl12xx_set_platform_data(&omap4_sdp4430_wlan_data);
if (ret)
pr_err("Error setting wl12xx data: %d\n", ret);
diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c
index ac77382..7dd9d4d 100644
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -136,8 +136,6 @@ static struct resource apollon_smc91x_resources[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = OMAP_GPIO_IRQ(APOLLON_ETHR_GPIO_IRQ),
- .end = OMAP_GPIO_IRQ(APOLLON_ETHR_GPIO_IRQ),
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
},
};
@@ -341,6 +339,10 @@ static void __init omap_apollon_init(void)
* You have to mux them off in device drivers later on
* if not needed.
*/
+ apollon_devices[1]->resource[1].start =
+ gpio_to_irq(APOLLON_ETHR_GPIO_IRQ);
+ apollon_devices[1]->resource[1].end =
+ gpio_to_irq(APOLLON_ETHR_GPIO_IRQ);
platform_add_devices(apollon_devices, ARRAY_SIZE(apollon_devices));
omap_serial_init();
omap_sdrc_init(NULL, NULL);
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index e873063..e947dc7 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -410,7 +410,6 @@ static struct resource omap_dm9000_resources[] = {
.flags = IORESOURCE_MEM,
},
[2] = {
- .start = OMAP_GPIO_IRQ(OMAP_DM9000_GPIO_IRQ),
.flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
},
};
@@ -637,6 +636,8 @@ static void __init devkit8000_init(void)
omap_dm9000_init();
devkit8000_i2c_init();
+ devkit8000_devices[2]->resource[2].start =
+ gpio_to_irq(OMAP_DM9000_GPIO_IRQ);
platform_add_devices(devkit8000_devices,
ARRAY_SIZE(devkit8000_devices));
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index 54af800..0bbbabe 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -348,7 +348,6 @@ static struct at24_platform_data m24c01 = {
static struct i2c_board_info __initdata h4_i2c_board_info[] = {
{
I2C_BOARD_INFO("isp1301_omap", 0x2d),
- .irq = OMAP_GPIO_IRQ(125),
},
{ /* EEPROM on mainboard */
I2C_BOARD_INFO("24c01", 0x52),
@@ -377,6 +376,7 @@ static void __init omap_h4_init(void)
*/
board_mkp_init();
+ h4_i2c_board_info[0].irq = gpio_to_irq(125);
i2c_register_board_info(1, h4_i2c_board_info,
ARRAY_SIZE(h4_i2c_board_info));
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index c877236..eed88a4 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -487,7 +487,6 @@ static struct platform_device omap3evm_wlan_regulator = {
};
struct wl12xx_platform_data omap3evm_wlan_data __initdata = {
- .irq = OMAP_GPIO_IRQ(OMAP3EVM_WLAN_IRQ_GPIO),
.board_ref_clock = WL12XX_REFCLOCK_38, /* 38.4 MHz */
};
#endif
@@ -623,6 +622,7 @@ static void __init omap3_evm_wl12xx_init(void)
int ret;
/* WL12xx WLAN Init */
+ omap3evm_wlan_data.irq = gpio_to_irq(OMAP3EVM_WLAN_IRQ_GPIO);
ret = wl12xx_set_platform_data(&omap3evm_wlan_data);
if (ret)
pr_err("error setting wl12xx data: %d\n", ret);
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index 28fc271..4496007 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -199,7 +199,6 @@ static struct platform_device omap_vwlan_device = {
};
struct wl12xx_platform_data omap_panda_wlan_data __initdata = {
- .irq = OMAP_GPIO_IRQ(GPIO_WIFI_IRQ),
/* PANDA ref clock is 38.4 MHz */
.board_ref_clock = 2,
};
@@ -494,6 +493,7 @@ static void __init omap4_panda_init(void)
package = OMAP_PACKAGE_CBL;
omap4_mux_init(board_mux, NULL, package);
+ omap_panda_wlan_data.irq = gpio_to_irq(GPIO_WIFI_IRQ);
ret = wl12xx_set_platform_data(&omap_panda_wlan_data);
if (ret)
pr_err("error setting wl12xx data: %d\n", ret);
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index acb4e77..1cec076 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -172,7 +172,6 @@ static struct spi_board_info rx51_peripherals_spi_board_info[] __initdata = {
.modalias = "tsc2005",
.bus_num = 1,
.chip_select = 0,
- .irq = OMAP_GPIO_IRQ(RX51_TSC2005_IRQ_GPIO),
.max_speed_hz = 6000000,
.controller_data = &tsc2005_mcspi_config,
.platform_data = &tsc2005_pdata,
@@ -1124,6 +1123,8 @@ static void __init rx51_init_tsc2005(void)
"tsc2005 reset");
if (r >= 0) {
tsc2005_pdata.set_reset = rx51_tsc2005_set_reset;
+ rx51_peripherals_spi_board_info[RX51_SPI_TSC2005].irq =
+ gpio_to_irq(RX51_TSC2005_IRQ_GPIO);
} else {
printk(KERN_ERR "unable to get %s GPIO\n", "tsc2005 reset");
tsc2005_pdata.esd_timeout_ms = 0;
diff --git a/arch/arm/mach-omap2/board-zoom-debugboard.c b/arch/arm/mach-omap2/board-zoom-debugboard.c
index 369c2eb..1e8540e 100644
--- a/arch/arm/mach-omap2/board-zoom-debugboard.c
+++ b/arch/arm/mach-omap2/board-zoom-debugboard.c
@@ -43,7 +43,6 @@ static inline void __init zoom_init_smsc911x(void)
static struct plat_serial8250_port serial_platform_data[] = {
{
.mapbase = ZOOM_UART_BASE,
- .irq = OMAP_GPIO_IRQ(102),
.flags = UPF_BOOT_AUTOCONF|UPF_IOREMAP|UPF_SHARE_IRQ,
.irqflags = IRQF_SHARED | IRQF_TRIGGER_RISING,
.iotype = UPIO_MEM,
@@ -89,6 +88,8 @@ static inline void __init zoom_init_quaduart(void)
if (gpio_request_one(quart_gpio, GPIOF_IN, "TL16CP754C GPIO") < 0)
printk(KERN_ERR "Failed to request GPIO%d for TL16CP754C\n",
quart_gpio);
+
+ serial_platform_data[0].irq = gpio_to_irq(102);
}
static inline int omap_zoom_debugboard_detect(void)
diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c
index c126461..a489f82 100644
--- a/arch/arm/mach-omap2/board-zoom-peripherals.c
+++ b/arch/arm/mach-omap2/board-zoom-peripherals.c
@@ -193,7 +193,6 @@ static struct platform_device omap_vwlan_device = {
};
static struct wl12xx_platform_data omap_zoom_wlan_data __initdata = {
- .irq = OMAP_GPIO_IRQ(OMAP_ZOOM_WLAN_IRQ_GPIO),
/* ZOOM ref clock is 26 MHz */
.board_ref_clock = 1,
};
@@ -296,7 +295,10 @@ static void enable_board_wakeup_source(void)
void __init zoom_peripherals_init(void)
{
- int ret = wl12xx_set_platform_data(&omap_zoom_wlan_data);
+ int ret;
+
+ omap_zoom_wlan_data.irq = gpio_to_irq(OMAP_ZOOM_WLAN_IRQ_GPIO);
+ ret = wl12xx_set_platform_data(&omap_zoom_wlan_data);
if (ret)
pr_err("error setting wl12xx data: %d\n", ret);
diff --git a/arch/arm/mach-omap2/common-board-devices.c b/arch/arm/mach-omap2/common-board-devices.c
index bcb0c58..4cb17b4 100644
--- a/arch/arm/mach-omap2/common-board-devices.c
+++ b/arch/arm/mach-omap2/common-board-devices.c
@@ -79,7 +79,7 @@ void __init omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce,
ads7846_config.gpio_pendown = gpio_pendown;
spi_bi->bus_num = bus_num;
- spi_bi->irq = OMAP_GPIO_IRQ(gpio_pendown);
+ spi_bi->irq = gpio_to_irq(gpio_pendown);
if (board_pdata)
spi_bi->platform_data = board_pdata;
--
1.7.0.4
^ permalink raw reply related [flat|nested] 5+ messages in thread