From mboxrd@z Thu Jan 1 00:00:00 1970 From: mathieu.poirier@linaro.org (mathieu.poirier at linaro.org) Date: Fri, 23 Mar 2012 11:13:53 -0600 Subject: [PATCH 6/9] omap2: select twl4030 support on boards that need it In-Reply-To: <1332522836-29517-1-git-send-email-mathieu.poirier@linaro.org> References: <1332522836-29517-1-git-send-email-mathieu.poirier@linaro.org> Message-ID: <1332522836-29517-7-git-send-email-mathieu.poirier@linaro.org> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org From: Arnd Bergmann These three boards unconditionally use the twl4030 driver from the board-zoom-display.c file. Make sure that the driver is always there. We also need to select the I2C core so we are able to build that driver. Signed-off-by: Arnd Bergmann Signed-off-by: Mathieu Poirier Acked-by: Tony Lindgren --- arch/arm/mach-omap2/Kconfig | 9 +++++++++ 1 files changed, 9 insertions(+), 0 deletions(-) diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index e20c8ab..0279e9e 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -265,6 +265,9 @@ config MACH_OMAP_ZOOM2 select SERIAL_CORE_CONSOLE select SERIAL_8250_CONSOLE select REGULATOR_FIXED_VOLTAGE if REGULATOR + select TWL4030_CORE + select MFD_SUPPORT + select I2C config MACH_OMAP_ZOOM3 bool "OMAP3630 Zoom3 board" @@ -275,6 +278,9 @@ config MACH_OMAP_ZOOM3 select SERIAL_CORE_CONSOLE select SERIAL_8250_CONSOLE select REGULATOR_FIXED_VOLTAGE if REGULATOR + select TWL4030_CORE + select MFD_SUPPORT + select I2C config MACH_CM_T35 bool "CompuLab CM-T35/CM-T3730 modules" @@ -316,6 +322,9 @@ config MACH_OMAP_3630SDP depends on ARCH_OMAP3 default y select OMAP_PACKAGE_CBP + select TWL4030_CORE + select MFD_SUPPORT + select I2C config MACH_TI8168EVM bool "TI8168 Evaluation Module" -- 1.7.5.4