[PATCH 0/5] mtd: plat_nand: Add default partition parser and use it

[PATCH 0/5] mtd: plat_nand: Add default partition parser and use it

[H Hartley Sweeten]

This patch series adds cmdlinepart as the default partition parser for the
plat_nand driver and updates all the arch setup code to use it.

Arch setup code that requires other partition parsers can still pass that
information as chip.part_probe_types.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
  mtd: plat_nand: Add default partition parser to driver
  arm: Use the plat_nand default partition parser
  blackfin: Use the plat_nand default partition parser
  mips: Use the plat_nand default partition parser
  sh: Use the plat_nand default partition parser

 arch/arm/mach-ep93xx/snappercl15.c        |    3 ---
 arch/arm/mach-ep93xx/ts72xx.c             |    3 ---
 arch/arm/mach-ixp4xx/ixdp425-setup.c      |    3 ---
 arch/arm/mach-omap1/board-fsample.c       |    3 ---
 arch/arm/mach-omap1/board-h2.c            |    3 ---
 arch/arm/mach-omap1/board-h3.c            |    3 ---
 arch/arm/mach-omap1/board-perseus2.c      |    3 ---
 arch/arm/mach-orion5x/ts78xx-setup.c      |    3 ---
 arch/arm/mach-pxa/balloon3.c              |    3 ---
 arch/arm/mach-pxa/em-x270.c               |    3 ---
 arch/arm/mach-pxa/palmtx.c                |    3 ---
 arch/blackfin/mach-bf561/boards/acvilon.c |    3 ---
 arch/mips/alchemy/devboards/db1200.c      |    3 ---
 arch/mips/alchemy/devboards/db1300.c      |    3 ---
 arch/mips/alchemy/devboards/db1550.c      |    3 ---
 arch/mips/pnx833x/common/platform.c       |    6 ------
 arch/sh/boards/mach-migor/setup.c         |    1 -
 drivers/mtd/nand/plat_nand.c              |    8 ++++++--
 18 files changed, 6 insertions(+), 54 deletions(-)

[PATCH 0/5] mtd: plat_nand: Add default partition parser and use it

[Artem Bityutskiy]

On Wed, 2012-03-28 at 11:12 -0700, H Hartley Sweeten wrote:
> This patch series adds cmdlinepart as the default partition parser for the
> plat_nand driver and updates all the arch setup code to use it.
> 
> Arch setup code that requires other partition parsers can still pass that
> information as chip.part_probe_types.
> 
> Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>

Pushed the series to l2-mtd.git, thanks!

-- 
Best Regards,
Artem Bityutskiy
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: This is a digitally signed message part
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20120402/61fd9a90/attachment.sig>