From: s.hauer@pengutronix.de (Sascha Hauer)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 23/40] ARM i.MX: Add common clock support for 2bit gate
Date: Tue, 10 Apr 2012 15:45:36 +0200 [thread overview]
Message-ID: <1334065553-7565-24-git-send-email-s.hauer@pengutronix.de> (raw)
In-Reply-To: <1334065553-7565-1-git-send-email-s.hauer@pengutronix.de>
This gate consists of two bits:
0b00: clk disabled
0b01: clk enabled in run mode and disabled in sleep mode
0b11: clk enabled
Currently only disabled and enabled are supported. As it's unlikely
that we find something like this in another SoC create a i.MX specific
clk helper for this.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/mach-imx/Makefile | 2 +-
arch/arm/mach-imx/clk-gate2.c | 125 +++++++++++++++++++++++++++++++++++++++++
arch/arm/mach-imx/clk.h | 12 ++++
3 files changed, 138 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/mach-imx/clk-gate2.c
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index 66bc6be..1b3f2ae 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -11,7 +11,7 @@ obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o clock-imx35.o ehci-imx35.o pm-i
obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clock-mx51-mx53.o ehci-imx5.o pm-imx5.o cpu_op-mx51.o
-obj-$(CONFIG_COMMON_CLK) += clk-pllv1.o clk-pllv2.o clk-pllv3.o
+obj-$(CONFIG_COMMON_CLK) += clk-pllv1.o clk-pllv2.o clk-pllv3.o clk-gate2.o
# Support for CMOS sensor interface
obj-$(CONFIG_MX1_VIDEO) += mx1-camera-fiq.o mx1-camera-fiq-ksym.o
diff --git a/arch/arm/mach-imx/clk-gate2.c b/arch/arm/mach-imx/clk-gate2.c
new file mode 100644
index 0000000..1ce9f44
--- /dev/null
+++ b/arch/arm/mach-imx/clk-gate2.c
@@ -0,0 +1,125 @@
+/*
+ * Copyright (C) 2010-2011 Canonical Ltd <jeremy.kerr@canonical.com>
+ * Copyright (C) 2011-2012 Mike Turquette, Linaro Ltd <mturquette@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Gated clock implementation
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/string.h>
+
+/**
+ * DOC: basic gatable clock which can gate and ungate it's ouput
+ *
+ * Traits of this clock:
+ * prepare - clk_(un)prepare only ensures parent is (un)prepared
+ * enable - clk_enable and clk_disable are functional & control gating
+ * rate - inherits rate from parent. No clk_set_rate support
+ * parent - fixed parent. No clk_set_parent support
+ */
+
+#define to_clk_gate(_hw) container_of(_hw, struct clk_gate, hw)
+
+static int clk_gate2_enable(struct clk_hw *hw)
+{
+ struct clk_gate *gate = to_clk_gate(hw);
+ u32 reg;
+ unsigned long flags = 0;
+
+ if (gate->lock)
+ spin_lock_irqsave(gate->lock, flags);
+
+ reg = readl(gate->reg);
+ reg |= 3 << gate->bit_idx;
+ writel(reg, gate->reg);
+
+ if (gate->lock)
+ spin_unlock_irqrestore(gate->lock, flags);
+
+ return 0;
+}
+
+static void clk_gate2_disable(struct clk_hw *hw)
+{
+ struct clk_gate *gate = to_clk_gate(hw);
+ u32 reg;
+ unsigned long flags = 0;
+
+ if (gate->lock)
+ spin_lock_irqsave(gate->lock, flags);
+
+ reg = readl(gate->reg);
+ reg &= ~(3 << gate->bit_idx);
+ writel(reg, gate->reg);
+
+ if (gate->lock)
+ spin_unlock_irqrestore(gate->lock, flags);
+}
+
+static int clk_gate2_is_enabled(struct clk_hw *hw)
+{
+ u32 reg;
+ struct clk_gate *gate = to_clk_gate(hw);
+
+ reg = readl(gate->reg);
+
+ if (((reg >> gate->bit_idx) & 3) == 3)
+ return 1;
+
+ return 0;
+}
+
+static struct clk_ops clk_gate2_ops = {
+ .enable = clk_gate2_enable,
+ .disable = clk_gate2_disable,
+ .is_enabled = clk_gate2_is_enabled,
+};
+
+struct clk *clk_register_gate2(struct device *dev, const char *name,
+ const char *parent_name, unsigned long flags,
+ void __iomem *reg, u8 bit_idx,
+ u8 clk_gate2_flags, spinlock_t *lock)
+{
+ struct clk_gate *gate;
+ struct clk *clk;
+
+ gate = kzalloc(sizeof(struct clk_gate), GFP_KERNEL);
+
+ if (!gate) {
+ pr_err("%s: could not allocate gated clk\n", __func__);
+ return NULL;
+ }
+
+ /* struct clk_gate assignments */
+ gate->reg = reg;
+ gate->bit_idx = bit_idx;
+ gate->flags = clk_gate2_flags;
+ gate->lock = lock;
+
+ if (parent_name) {
+ gate->parent[0] = kstrdup(parent_name, GFP_KERNEL);
+ if (!gate->parent[0])
+ goto out;
+ }
+
+ clk = clk_register(dev, name,
+ &clk_gate2_ops, &gate->hw,
+ gate->parent,
+ (parent_name ? 1 : 0),
+ flags);
+ if (clk)
+ return clk;
+out:
+ kfree(gate->parent[0]);
+ kfree(gate);
+
+ return NULL;
+}
diff --git a/arch/arm/mach-imx/clk.h b/arch/arm/mach-imx/clk.h
index 96ac3b1..fb44f03 100644
--- a/arch/arm/mach-imx/clk.h
+++ b/arch/arm/mach-imx/clk.h
@@ -5,6 +5,11 @@
#include <linux/clk-provider.h>
#include <mach/clock.h>
+struct clk *clk_register_gate2(struct device *dev, const char *name,
+ const char *parent_name, unsigned long flags,
+ void __iomem *reg, u8 bit_idx,
+ u8 clk_gate_flags, spinlock_t *lock);
+
enum imx_pllv3_type {
IMX_PLLV3_GENERIC,
IMX_PLLV3_SYS,
@@ -43,6 +48,13 @@ static inline struct clk *imx_clk_gate(const char *name, const char *parent,
shift, 0, &imx_ccm_lock);
}
+static inline struct clk *imx_clk_gate2(const char *name, const char *parent,
+ void __iomem *reg, u8 shift)
+{
+ return clk_register_gate2(NULL, name, parent, CLK_SET_RATE_PARENT, reg,
+ shift, 0, &imx_ccm_lock);
+}
+
static inline struct clk *imx_clk_mux(const char *name, void __iomem *reg,
u8 shift, u8 width, char **parents, int num_parents)
{
--
1.7.9.5
next prev parent reply other threads:[~2012-04-10 13:45 UTC|newest]
Thread overview: 101+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-04-10 13:45 Convert i.MX architecture to generic clock framework Sascha Hauer
2012-04-10 13:45 ` [PATCH 01/40] clkdev: add clkname to struct clk_lookup Sascha Hauer
2012-04-10 14:30 ` Russell King - ARM Linux
2012-04-10 16:11 ` Sascha Hauer
2012-04-11 1:11 ` Richard Zhao
2012-04-11 8:24 ` Mark Brown
2012-04-11 8:45 ` Richard Zhao
2012-04-11 9:15 ` Mark Brown
2012-04-11 9:21 ` Russell King - ARM Linux
2012-04-11 9:32 ` Mark Brown
2012-04-11 9:41 ` Russell King - ARM Linux
2012-04-11 10:31 ` Mark Brown
2012-04-11 11:43 ` Russell King - ARM Linux
2012-04-12 16:33 ` Mark Brown
2012-04-11 9:20 ` Russell King - ARM Linux
2012-04-11 9:42 ` Sascha Hauer
2012-04-11 9:47 ` Russell King - ARM Linux
2012-04-13 3:33 ` Viresh Kumar
2012-04-13 4:17 ` Shawn Guo
2012-04-13 5:06 ` Viresh Kumar
2012-04-13 5:22 ` Shawn Guo
2012-04-13 8:59 ` Mark Brown
2012-04-13 9:10 ` Viresh Kumar
2012-04-13 9:17 ` Richard Zhao
2012-04-13 9:26 ` Russell King - ARM Linux
2012-04-13 9:27 ` Viresh Kumar
2012-04-13 9:36 ` Russell King - ARM Linux
2012-04-13 10:02 ` Viresh Kumar
2012-04-13 10:08 ` Mark Brown
2012-04-13 10:20 ` Russell King - ARM Linux
2012-04-13 10:43 ` Viresh Kumar
2012-04-13 23:19 ` Turquette, Mike
2012-04-24 2:17 ` Richard Zhao
2012-04-10 13:45 ` [PATCH 02/40] clk: add a fixed factor clock Sascha Hauer
2012-04-17 10:15 ` Viresh Kumar
2012-04-19 3:48 ` Viresh Kumar
2012-04-19 6:16 ` Domenico Andreoli
2012-04-19 6:19 ` Viresh Kumar
2012-04-19 6:45 ` Sascha Hauer
2012-04-10 13:45 ` [PATCH 03/40] clk: declare clk_ops of basic clks in clk-provider.h Sascha Hauer
2012-04-10 13:45 ` [PATCH 04/40] dmaengine i.MX SDMA: do not depend on grouped clocks Sascha Hauer
2012-04-10 13:45 ` [PATCH 05/40] spi i.MX: " Sascha Hauer
2012-04-10 13:45 ` [PATCH 06/40] video imxfb: " Sascha Hauer
2012-04-10 13:45 ` [PATCH 07/40] net fec: " Sascha Hauer
2012-04-10 13:45 ` [PATCH 08/40] mmc mxcmmc: " Sascha Hauer
2012-04-10 13:45 ` [PATCH 09/40] mmc sdhc i.MX: " Sascha Hauer
2012-04-20 2:06 ` Richard Zhao
2012-04-20 2:42 ` Richard Zhao
2012-04-10 13:45 ` [PATCH 10/40] serial " Sascha Hauer
2012-04-10 13:45 ` [PATCH 11/40] mtd mxc_nand: prepare/unprepare clock Sascha Hauer
2012-04-10 13:45 ` [PATCH 12/40] USB ehci mxc: " Sascha Hauer
2012-04-10 13:45 ` [PATCH 13/40] w1 i.MX: " Sascha Hauer
2012-04-10 13:45 ` [PATCH 14/40] watchdog imx2: prepare clk before enabling it Sascha Hauer
2012-04-10 13:45 ` [PATCH 15/40] media mx3 camera: " Sascha Hauer
2012-04-10 13:45 ` [PATCH 16/40] dmaengine i.MX ipu: clk_prepare/unprepare clock Sascha Hauer
2012-04-10 13:45 ` [PATCH 17/40] ARM i.MX5: prepare gpc_dvfs_clk Sascha Hauer
2012-04-10 13:45 ` [PATCH 18/40] ARM i.MX: prepare for common clock framework Sascha Hauer
2012-04-10 13:45 ` [PATCH 19/40] ARM i.MX timer: request correct clock Sascha Hauer
2012-04-10 13:45 ` [PATCH 20/40] ARM i.MX: Add common clock support for pllv1 Sascha Hauer
2012-04-10 13:45 ` [PATCH 21/40] ARM i.MX: Add common clock support for pllv2 Sascha Hauer
2012-04-10 13:45 ` [PATCH 22/40] ARM: imx: add common clock support for pllv3 Sascha Hauer
2012-04-10 13:45 ` Sascha Hauer [this message]
2012-04-19 7:00 ` [PATCH 23/40] ARM i.MX: Add common clock support for 2bit gate Shawn Guo
2012-04-19 7:15 ` Richard Zhao
2012-04-19 7:26 ` Lei Wen
2012-04-19 7:52 ` Domenico Andreoli
2012-04-10 13:45 ` [PATCH 24/40] ARM: imx: add common clock support for pfd Sascha Hauer
2012-04-10 13:45 ` [PATCH 25/40] ARM: imx: add common clock support for clk busy Sascha Hauer
2012-04-10 18:59 ` Stephen Boyd
2012-04-11 6:53 ` Sascha Hauer
2012-04-11 22:21 ` Stephen Boyd
2012-04-12 3:30 ` Shawn Guo
2012-04-12 1:50 ` Richard Zhao
2012-04-12 2:44 ` Shawn Guo
2012-04-13 2:09 ` [PATCH] ARM: imx: remove clk_hw from clk_busy Shawn Guo
2012-04-13 14:34 ` Sascha Hauer
2012-04-10 13:45 ` [PATCH 26/40] ARM i.MX3: Make ccm base address a variable Sascha Hauer
2012-04-10 13:45 ` [PATCH 27/40] ARM i.MX25: implement clocks using common clock framework Sascha Hauer
2012-04-10 20:10 ` Roberto Nibali
2012-04-10 20:45 ` Fabio Estevam
2012-04-11 7:01 ` Roberto Nibali
2012-04-10 13:45 ` [PATCH 28/40] ARM i.MX1: " Sascha Hauer
2012-04-16 21:07 ` Sascha Hauer
2012-04-10 13:45 ` [PATCH 29/40] ARM i.MX21: " Sascha Hauer
2012-04-10 13:45 ` [PATCH 30/40] ARM i.MX27: " Sascha Hauer
2012-04-10 13:45 ` [PATCH 31/40] ARM i.MX31: " Sascha Hauer
2012-04-10 13:45 ` [PATCH 32/40] ARM i.MX5: " Sascha Hauer
2012-04-23 6:39 ` Richard Zhao
2012-04-23 6:54 ` Sascha Hauer
2012-04-23 7:28 ` Richard Zhao
2012-04-10 13:45 ` [PATCH 33/40] ARM i.MX35: " Sascha Hauer
2012-04-10 13:45 ` [PATCH 34/40] ARM: imx6: " Sascha Hauer
2012-04-18 11:33 ` Sascha Hauer
2012-04-19 13:56 ` Shawn Guo
2012-04-19 14:06 ` Sascha Hauer
2012-04-10 13:45 ` [PATCH 35/40] ARM i.MX: remove now unused old clock support Sascha Hauer
2012-04-10 13:45 ` [PATCH 36/40] ARM i.MX pllv1: move mxc_decode_pll to its only user Sascha Hauer
2012-04-10 13:45 ` [PATCH 37/40] ARM i.MX: remove unused legacy clock support Sascha Hauer
2012-04-10 13:45 ` [PATCH 38/40] USB gadget i.MX: fix clock handling Sascha Hauer
2012-04-10 13:45 ` [PATCH 39/40] USB ehci i.MX: Fix " Sascha Hauer
2012-04-10 13:45 ` [PATCH 40/40] ARM i.MX: Remove now unused struct clk argument from mxc_timer_init Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1334065553-7565-24-git-send-email-s.hauer@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).