From: s.hauer@pengutronix.de (Sascha Hauer)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 25/40] ARM: imx: add common clock support for clk busy
Date: Tue, 10 Apr 2012 15:45:38 +0200 [thread overview]
Message-ID: <1334065553-7565-26-git-send-email-s.hauer@pengutronix.de> (raw)
In-Reply-To: <1334065553-7565-1-git-send-email-s.hauer@pengutronix.de>
From: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
arch/arm/mach-imx/Makefile | 2 +-
arch/arm/mach-imx/clk-busy.c | 167 ++++++++++++++++++++++++++++++++++++++++++
arch/arm/mach-imx/clk.h | 8 ++
3 files changed, 176 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/mach-imx/clk-busy.c
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index 4d6be8d..ae0a779 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -12,7 +12,7 @@ obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o clock-imx35.o ehci-imx35.o pm-i
obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clock-mx51-mx53.o ehci-imx5.o pm-imx5.o cpu_op-mx51.o
obj-$(CONFIG_COMMON_CLK) += clk-pllv1.o clk-pllv2.o clk-pllv3.o clk-gate2.o \
- clk-pfd.o
+ clk-pfd.o clk-busy.o
# Support for CMOS sensor interface
obj-$(CONFIG_MX1_VIDEO) += mx1-camera-fiq.o mx1-camera-fiq-ksym.o
diff --git a/arch/arm/mach-imx/clk-busy.c b/arch/arm/mach-imx/clk-busy.c
new file mode 100644
index 0000000..9450f0b
--- /dev/null
+++ b/arch/arm/mach-imx/clk-busy.c
@@ -0,0 +1,167 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2012 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include "clk.h"
+
+static int clk_busy_wait(void __iomem *reg, u8 shift)
+{
+ unsigned long timeout = jiffies + msecs_to_jiffies(10);
+
+ while (readl_relaxed(reg) & (1 << shift))
+ if (time_after(jiffies, timeout))
+ return -ETIMEDOUT;
+
+ return 0;
+}
+
+struct clk_busy_divider {
+ struct clk_hw hw;
+ void __iomem *reg;
+ u8 shift;
+ struct clk_divider div;
+ const struct clk_ops *div_ops;
+};
+
+#define to_clk_busy_divider(_hw) container_of(_hw, struct clk_busy_divider, hw)
+
+static unsigned long clk_busy_divider_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct clk_busy_divider *busy = to_clk_busy_divider(hw);
+
+ return busy->div_ops->recalc_rate(&busy->div.hw, parent_rate);
+}
+
+static long clk_busy_divider_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *prate)
+{
+ struct clk_busy_divider *busy = to_clk_busy_divider(hw);
+
+ return busy->div_ops->round_rate(&busy->div.hw, rate, prate);
+}
+
+static int clk_busy_divider_set_rate(struct clk_hw *hw, unsigned long rate)
+{
+ struct clk_busy_divider *busy = to_clk_busy_divider(hw);
+ int ret;
+
+ ret = busy->div_ops->set_rate(&busy->div.hw, rate);
+ if (!ret)
+ ret = clk_busy_wait(busy->reg, busy->shift);
+
+ return ret;
+}
+
+static struct clk_ops clk_busy_divider_ops = {
+ .recalc_rate = clk_busy_divider_recalc_rate,
+ .round_rate = clk_busy_divider_round_rate,
+ .set_rate = clk_busy_divider_set_rate,
+};
+
+struct clk *imx_clk_busy_divider(const char *name, char *parent_name,
+ void __iomem *reg, u8 shift, u8 width,
+ void __iomem *busy_reg, u8 busy_shift)
+{
+ struct clk_busy_divider *busy;
+ struct clk *clk;
+
+ busy = kzalloc(sizeof(*busy), GFP_KERNEL);
+ if (!busy)
+ return NULL;
+
+ busy->reg = busy_reg;
+ busy->shift = busy_shift;
+
+ busy->div.reg = reg;
+ busy->div.shift = shift;
+ busy->div.width = width;
+ busy->div.lock = &imx_ccm_lock;
+ busy->div_ops = &clk_divider_ops;
+
+ clk = clk_register(NULL, name, &clk_busy_divider_ops, &busy->hw,
+ &parent_name, 1, CLK_SET_RATE_PARENT);
+ if (!clk)
+ kfree(busy);
+
+ busy->div.hw.clk = clk;
+
+ return clk;
+}
+
+struct clk_busy_mux {
+ struct clk_hw hw;
+ void __iomem *reg;
+ u8 shift;
+ struct clk_mux mux;
+ const struct clk_ops *mux_ops;
+};
+
+#define to_clk_busy_mux(_hw) container_of(_hw, struct clk_busy_mux, hw)
+
+static u8 clk_busy_mux_get_parent(struct clk_hw *hw)
+{
+ struct clk_busy_mux *busy = to_clk_busy_mux(hw);
+
+ return busy->mux_ops->get_parent(&busy->mux.hw);
+}
+
+static int clk_busy_mux_set_parent(struct clk_hw *hw, u8 index)
+{
+ struct clk_busy_mux *busy = to_clk_busy_mux(hw);
+ int ret;
+
+ ret = busy->mux_ops->set_parent(&busy->mux.hw, index);
+ if (!ret)
+ ret = clk_busy_wait(busy->reg, busy->shift);
+
+ return ret;
+}
+
+struct clk_ops clk_busy_mux_ops = {
+ .get_parent = clk_busy_mux_get_parent,
+ .set_parent = clk_busy_mux_set_parent,
+};
+
+struct clk *imx_clk_busy_mux(const char *name, void __iomem *reg, u8 shift,
+ u8 width, void __iomem *busy_reg, u8 busy_shift,
+ char **parent_names, int num_parents)
+{
+ struct clk_busy_mux *busy;
+ struct clk *clk;
+
+ busy = kzalloc(sizeof(*busy), GFP_KERNEL);
+ if (!busy)
+ return NULL;
+
+ busy->reg = busy_reg;
+ busy->shift = busy_shift;
+
+ busy->mux.reg = reg;
+ busy->mux.shift = shift;
+ busy->mux.width = width;
+ busy->mux.lock = &imx_ccm_lock;
+ busy->mux_ops = &clk_mux_ops;
+
+ clk = clk_register(NULL, name, &clk_busy_mux_ops, &busy->hw,
+ parent_names, num_parents, 0);
+ if (!clk)
+ kfree(busy);
+
+ busy->mux.hw.clk = clk;
+
+ return clk;
+}
diff --git a/arch/arm/mach-imx/clk.h b/arch/arm/mach-imx/clk.h
index 50f5638..53ab2f5 100644
--- a/arch/arm/mach-imx/clk.h
+++ b/arch/arm/mach-imx/clk.h
@@ -44,6 +44,10 @@ static inline struct clk *imx_clk_divider(const char *name, const char *parent,
reg, shift, width, 0, &imx_ccm_lock);
}
+struct clk *imx_clk_busy_divider(const char *name, char *parent_name,
+ void __iomem *reg, u8 shift, u8 width,
+ void __iomem *busy_reg, u8 busy_shift);
+
static inline struct clk *imx_clk_gate(const char *name, const char *parent,
void __iomem *reg, u8 shift)
{
@@ -65,6 +69,10 @@ static inline struct clk *imx_clk_mux(const char *name, void __iomem *reg,
width, 0, &imx_ccm_lock);
}
+struct clk *imx_clk_busy_mux(const char *name, void __iomem *reg, u8 shift,
+ u8 width, void __iomem *busy_reg, u8 busy_shift,
+ char **parent_names, int num_parents);
+
static inline struct clk *imx_clk_fixed_factor(const char *name,
const char *parent, unsigned int mult, unsigned int div)
{
--
1.7.9.5
next prev parent reply other threads:[~2012-04-10 13:45 UTC|newest]
Thread overview: 101+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-04-10 13:45 Convert i.MX architecture to generic clock framework Sascha Hauer
2012-04-10 13:45 ` [PATCH 01/40] clkdev: add clkname to struct clk_lookup Sascha Hauer
2012-04-10 14:30 ` Russell King - ARM Linux
2012-04-10 16:11 ` Sascha Hauer
2012-04-11 1:11 ` Richard Zhao
2012-04-11 8:24 ` Mark Brown
2012-04-11 8:45 ` Richard Zhao
2012-04-11 9:15 ` Mark Brown
2012-04-11 9:21 ` Russell King - ARM Linux
2012-04-11 9:32 ` Mark Brown
2012-04-11 9:41 ` Russell King - ARM Linux
2012-04-11 10:31 ` Mark Brown
2012-04-11 11:43 ` Russell King - ARM Linux
2012-04-12 16:33 ` Mark Brown
2012-04-11 9:20 ` Russell King - ARM Linux
2012-04-11 9:42 ` Sascha Hauer
2012-04-11 9:47 ` Russell King - ARM Linux
2012-04-13 3:33 ` Viresh Kumar
2012-04-13 4:17 ` Shawn Guo
2012-04-13 5:06 ` Viresh Kumar
2012-04-13 5:22 ` Shawn Guo
2012-04-13 8:59 ` Mark Brown
2012-04-13 9:10 ` Viresh Kumar
2012-04-13 9:17 ` Richard Zhao
2012-04-13 9:26 ` Russell King - ARM Linux
2012-04-13 9:27 ` Viresh Kumar
2012-04-13 9:36 ` Russell King - ARM Linux
2012-04-13 10:02 ` Viresh Kumar
2012-04-13 10:08 ` Mark Brown
2012-04-13 10:20 ` Russell King - ARM Linux
2012-04-13 10:43 ` Viresh Kumar
2012-04-13 23:19 ` Turquette, Mike
2012-04-24 2:17 ` Richard Zhao
2012-04-10 13:45 ` [PATCH 02/40] clk: add a fixed factor clock Sascha Hauer
2012-04-17 10:15 ` Viresh Kumar
2012-04-19 3:48 ` Viresh Kumar
2012-04-19 6:16 ` Domenico Andreoli
2012-04-19 6:19 ` Viresh Kumar
2012-04-19 6:45 ` Sascha Hauer
2012-04-10 13:45 ` [PATCH 03/40] clk: declare clk_ops of basic clks in clk-provider.h Sascha Hauer
2012-04-10 13:45 ` [PATCH 04/40] dmaengine i.MX SDMA: do not depend on grouped clocks Sascha Hauer
2012-04-10 13:45 ` [PATCH 05/40] spi i.MX: " Sascha Hauer
2012-04-10 13:45 ` [PATCH 06/40] video imxfb: " Sascha Hauer
2012-04-10 13:45 ` [PATCH 07/40] net fec: " Sascha Hauer
2012-04-10 13:45 ` [PATCH 08/40] mmc mxcmmc: " Sascha Hauer
2012-04-10 13:45 ` [PATCH 09/40] mmc sdhc i.MX: " Sascha Hauer
2012-04-20 2:06 ` Richard Zhao
2012-04-20 2:42 ` Richard Zhao
2012-04-10 13:45 ` [PATCH 10/40] serial " Sascha Hauer
2012-04-10 13:45 ` [PATCH 11/40] mtd mxc_nand: prepare/unprepare clock Sascha Hauer
2012-04-10 13:45 ` [PATCH 12/40] USB ehci mxc: " Sascha Hauer
2012-04-10 13:45 ` [PATCH 13/40] w1 i.MX: " Sascha Hauer
2012-04-10 13:45 ` [PATCH 14/40] watchdog imx2: prepare clk before enabling it Sascha Hauer
2012-04-10 13:45 ` [PATCH 15/40] media mx3 camera: " Sascha Hauer
2012-04-10 13:45 ` [PATCH 16/40] dmaengine i.MX ipu: clk_prepare/unprepare clock Sascha Hauer
2012-04-10 13:45 ` [PATCH 17/40] ARM i.MX5: prepare gpc_dvfs_clk Sascha Hauer
2012-04-10 13:45 ` [PATCH 18/40] ARM i.MX: prepare for common clock framework Sascha Hauer
2012-04-10 13:45 ` [PATCH 19/40] ARM i.MX timer: request correct clock Sascha Hauer
2012-04-10 13:45 ` [PATCH 20/40] ARM i.MX: Add common clock support for pllv1 Sascha Hauer
2012-04-10 13:45 ` [PATCH 21/40] ARM i.MX: Add common clock support for pllv2 Sascha Hauer
2012-04-10 13:45 ` [PATCH 22/40] ARM: imx: add common clock support for pllv3 Sascha Hauer
2012-04-10 13:45 ` [PATCH 23/40] ARM i.MX: Add common clock support for 2bit gate Sascha Hauer
2012-04-19 7:00 ` Shawn Guo
2012-04-19 7:15 ` Richard Zhao
2012-04-19 7:26 ` Lei Wen
2012-04-19 7:52 ` Domenico Andreoli
2012-04-10 13:45 ` [PATCH 24/40] ARM: imx: add common clock support for pfd Sascha Hauer
2012-04-10 13:45 ` Sascha Hauer [this message]
2012-04-10 18:59 ` [PATCH 25/40] ARM: imx: add common clock support for clk busy Stephen Boyd
2012-04-11 6:53 ` Sascha Hauer
2012-04-11 22:21 ` Stephen Boyd
2012-04-12 3:30 ` Shawn Guo
2012-04-12 1:50 ` Richard Zhao
2012-04-12 2:44 ` Shawn Guo
2012-04-13 2:09 ` [PATCH] ARM: imx: remove clk_hw from clk_busy Shawn Guo
2012-04-13 14:34 ` Sascha Hauer
2012-04-10 13:45 ` [PATCH 26/40] ARM i.MX3: Make ccm base address a variable Sascha Hauer
2012-04-10 13:45 ` [PATCH 27/40] ARM i.MX25: implement clocks using common clock framework Sascha Hauer
2012-04-10 20:10 ` Roberto Nibali
2012-04-10 20:45 ` Fabio Estevam
2012-04-11 7:01 ` Roberto Nibali
2012-04-10 13:45 ` [PATCH 28/40] ARM i.MX1: " Sascha Hauer
2012-04-16 21:07 ` Sascha Hauer
2012-04-10 13:45 ` [PATCH 29/40] ARM i.MX21: " Sascha Hauer
2012-04-10 13:45 ` [PATCH 30/40] ARM i.MX27: " Sascha Hauer
2012-04-10 13:45 ` [PATCH 31/40] ARM i.MX31: " Sascha Hauer
2012-04-10 13:45 ` [PATCH 32/40] ARM i.MX5: " Sascha Hauer
2012-04-23 6:39 ` Richard Zhao
2012-04-23 6:54 ` Sascha Hauer
2012-04-23 7:28 ` Richard Zhao
2012-04-10 13:45 ` [PATCH 33/40] ARM i.MX35: " Sascha Hauer
2012-04-10 13:45 ` [PATCH 34/40] ARM: imx6: " Sascha Hauer
2012-04-18 11:33 ` Sascha Hauer
2012-04-19 13:56 ` Shawn Guo
2012-04-19 14:06 ` Sascha Hauer
2012-04-10 13:45 ` [PATCH 35/40] ARM i.MX: remove now unused old clock support Sascha Hauer
2012-04-10 13:45 ` [PATCH 36/40] ARM i.MX pllv1: move mxc_decode_pll to its only user Sascha Hauer
2012-04-10 13:45 ` [PATCH 37/40] ARM i.MX: remove unused legacy clock support Sascha Hauer
2012-04-10 13:45 ` [PATCH 38/40] USB gadget i.MX: fix clock handling Sascha Hauer
2012-04-10 13:45 ` [PATCH 39/40] USB ehci i.MX: Fix " Sascha Hauer
2012-04-10 13:45 ` [PATCH 40/40] ARM i.MX: Remove now unused struct clk argument from mxc_timer_init Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1334065553-7565-26-git-send-email-s.hauer@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).