linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: bryan.wu@canonical.com (Bryan Wu)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 04/18] ARM: mach-ks8695: remove leds driver, since nobody use it
Date: Fri, 13 Apr 2012 19:26:03 +0800	[thread overview]
Message-ID: <1334316377-23915-5-git-send-email-bryan.wu@canonical.com> (raw)
In-Reply-To: <1334316377-23915-1-git-send-email-bryan.wu@canonical.com>

Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
---
 arch/arm/mach-ks8695/Makefile               |    3 -
 arch/arm/mach-ks8695/devices.c              |   21 ------
 arch/arm/mach-ks8695/include/mach/devices.h |    5 --
 arch/arm/mach-ks8695/leds.c                 |   92 ---------------------------
 4 files changed, 121 deletions(-)
 delete mode 100644 arch/arm/mach-ks8695/leds.c

diff --git a/arch/arm/mach-ks8695/Makefile b/arch/arm/mach-ks8695/Makefile
index 853efd9..9324ef9 100644
--- a/arch/arm/mach-ks8695/Makefile
+++ b/arch/arm/mach-ks8695/Makefile
@@ -11,9 +11,6 @@ obj-				:=
 # PCI support is optional
 obj-$(CONFIG_PCI)		+= pci.o
 
-# LEDs
-obj-$(CONFIG_LEDS)		+= leds.o
-
 # Board-specific support
 obj-$(CONFIG_MACH_KS8695)	+= board-micrel.o
 obj-$(CONFIG_MACH_DSM320)	+= board-dsm320.o
diff --git a/arch/arm/mach-ks8695/devices.c b/arch/arm/mach-ks8695/devices.c
index 73bd638..47399bc 100644
--- a/arch/arm/mach-ks8695/devices.c
+++ b/arch/arm/mach-ks8695/devices.c
@@ -182,27 +182,6 @@ static void __init ks8695_add_device_watchdog(void)
 }
 
 
-/* --------------------------------------------------------------------
- *  LEDs
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_LEDS)
-short ks8695_leds_cpu = -1;
-short ks8695_leds_timer = -1;
-
-void __init ks8695_init_leds(u8 cpu_led, u8 timer_led)
-{
-	/* Enable GPIO to access the LEDs */
-	gpio_direction_output(cpu_led, 1);
-	gpio_direction_output(timer_led, 1);
-
-	ks8695_leds_cpu	  = cpu_led;
-	ks8695_leds_timer = timer_led;
-}
-#else
-void __init ks8695_init_leds(u8 cpu_led, u8 timer_led) {}
-#endif
-
 /* -------------------------------------------------------------------- */
 
 /*
diff --git a/arch/arm/mach-ks8695/include/mach/devices.h b/arch/arm/mach-ks8695/include/mach/devices.h
index 85a3c9a..1e6594a 100644
--- a/arch/arm/mach-ks8695/include/mach/devices.h
+++ b/arch/arm/mach-ks8695/include/mach/devices.h
@@ -18,11 +18,6 @@ extern void __init ks8695_add_device_wan(void);
 extern void __init ks8695_add_device_lan(void);
 extern void __init ks8695_add_device_hpna(void);
 
- /* LEDs */
-extern short ks8695_leds_cpu;
-extern short ks8695_leds_timer;
-extern void __init ks8695_init_leds(u8 cpu_led, u8 timer_led);
-
  /* PCI */
 #define KS8695_MODE_PCI		0
 #define KS8695_MODE_MINIPCI	1
diff --git a/arch/arm/mach-ks8695/leds.c b/arch/arm/mach-ks8695/leds.c
deleted file mode 100644
index 4bd7075..0000000
--- a/arch/arm/mach-ks8695/leds.c
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- * LED driver for KS8695-based boards.
- *
- * Copyright (C) Andrew Victor
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-
-#include <asm/leds.h>
-#include <mach/devices.h>
-
-
-static inline void ks8695_led_on(unsigned int led)
-{
-	gpio_set_value(led, 0);
-}
-
-static inline void ks8695_led_off(unsigned int led)
-{
-	gpio_set_value(led, 1);
-}
-
-static inline void ks8695_led_toggle(unsigned int led)
-{
-	unsigned long is_off = gpio_get_value(led);
-	if (is_off)
-		ks8695_led_on(led);
-	else
-		ks8695_led_off(led);
-}
-
-
-/*
- * Handle LED events.
- */
-static void ks8695_leds_event(led_event_t evt)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-
-	switch(evt) {
-	case led_start:		/* System startup */
-		ks8695_led_on(ks8695_leds_cpu);
-		break;
-
-	case led_stop:		/* System stop / suspend */
-		ks8695_led_off(ks8695_leds_cpu);
-		break;
-
-#ifdef CONFIG_LEDS_TIMER
-	case led_timer:		/* Every 50 timer ticks */
-		ks8695_led_toggle(ks8695_leds_timer);
-		break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
-	case led_idle_start:	/* Entering idle state */
-		ks8695_led_off(ks8695_leds_cpu);
-		break;
-
-	case led_idle_end:	/* Exit idle state */
-		ks8695_led_on(ks8695_leds_cpu);
-		break;
-#endif
-
-	default:
-		break;
-	}
-
-	local_irq_restore(flags);
-}
-
-
-static int __init leds_init(void)
-{
-	if ((ks8695_leds_timer == -1) || (ks8695_leds_cpu == -1))
-		return -ENODEV;
-
-	leds_event = ks8695_leds_event;
-
-	leds_event(led_start);
-	return 0;
-}
-
-__initcall(leds_init);
-- 
1.7.9.5

  parent reply	other threads:[~2012-04-13 11:26 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-04-13 11:25 [PATCH v6 00/18] Introduce a led trigger for CPU activity and consolidate LED driver in ARM Bryan Wu
2012-04-13 11:26 ` [PATCH 01/18] led-triggers: create a trigger for CPU activity Bryan Wu
2012-04-13 14:56   ` Tim Gardner
2012-04-16  9:51     ` Bryan Wu
2012-04-16 18:09       ` Tim Gardner
2012-04-13 11:26 ` [PATCH 02/18] ARM: at91: convert old leds drivers to gpio_led and led_trigger drivers Bryan Wu
2012-04-13 11:26 ` [PATCH 03/18] ARM: mach-realview and mach-versatile: retire custom LED code Bryan Wu
2012-04-13 11:26 ` Bryan Wu [this message]
2012-04-13 11:26 ` [PATCH 05/18] ARM: mach-shark: " Bryan Wu
2012-04-13 11:26 ` [PATCH 06/18] ARM: mach-orion5x: convert custom LED code to gpio_led and LED CPU trigger Bryan Wu
2012-04-13 11:26 ` [PATCH 07/18] ARM: mach-integrator: move CM_CTRL to header file for accessing by other functions Bryan Wu
2012-04-13 11:26 ` [PATCH 08/18] ARM: mach-integrator: retire custom LED code Bryan Wu
2012-04-13 11:26 ` [PATCH 09/18] ARM: mach-clps711x: retire custom LED code of P720T machine Bryan Wu
2012-04-13 11:26 ` [PATCH 10/18] ARM: mach-ebsa110: retire custom LED code Bryan Wu
2012-04-13 11:26 ` [PATCH 11/18] ARM: mach-footbridge: " Bryan Wu
2012-04-13 11:26 ` [PATCH 12/18] char: nwflash: remove old led event code Bryan Wu
2012-04-13 11:26 ` [PATCH 13/18] ARM: mach-pxa: retire custom LED code Bryan Wu
2012-04-13 11:26 ` [PATCH 14/18] ARM: plat-samsung: remove including old leds event API header file Bryan Wu
2012-04-13 11:26 ` [PATCH 15/18] ARM: mach-pnx4008: " Bryan Wu
2012-04-13 11:26 ` [PATCH 16/18] ARM: mach-omap1: retire custom LED code Bryan Wu
2012-04-13 11:26 ` [PATCH 17/18] ARM: mach-sa1100: " Bryan Wu
2012-04-13 11:26 ` [PATCH 18/18] ARM: use new LEDS CPU trigger stub to replace old one Bryan Wu
  -- strict thread matches above, loose matches on Subject: below --
2012-08-13  5:51 [PATCH v10 00/18] Introduce a led trigger for CPU activity and consolidate LED driver in ARM Bryan Wu
2012-08-13  5:51 ` [PATCH 04/18] ARM: mach-ks8695: remove leds driver, since nobody use it Bryan Wu
2012-04-17 10:53 [PATCH v7 00/18] Introduce a led trigger for CPU activity and consolidate LED driver in ARM Bryan Wu
2012-04-17 10:53 ` [PATCH 04/18] ARM: mach-ks8695: remove leds driver, since nobody use it Bryan Wu
2012-03-30 11:58 [PATCH v5 00/18] Introduce a led trigger for CPU activity and consolidate LED driver in ARM Bryan Wu
2012-03-30 11:58 ` [PATCH 04/18] ARM: mach-ks8695: remove leds driver, since nobody use it Bryan Wu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1334316377-23915-5-git-send-email-bryan.wu@canonical.com \
    --to=bryan.wu@canonical.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).