From: alex@digriz.org.uk (Alexander Clouter)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 3/3] ARM: orion5x: ts78xx debugging changes
Date: Sat, 14 Apr 2012 19:00:54 +0100 [thread overview]
Message-ID: <1334426454-3206-4-git-send-email-alex@digriz.org.uk> (raw)
In-Reply-To: <1334426454-3206-1-git-send-email-alex@digriz.org.uk>
Moved to using a redefined pr_fmt to spare having to manually
prefix every message line with 'ts78xx'.
Signed-off-by: Alexander Clouter <alex@digriz.org.uk>
---
arch/arm/mach-orion5x/ts78xx-setup.c | 34 ++++++++++++++++++----------------
1 file changed, 18 insertions(+), 16 deletions(-)
diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c b/arch/arm/mach-orion5x/ts78xx-setup.c
index 4ae822b..f6d1232 100644
--- a/arch/arm/mach-orion5x/ts78xx-setup.c
+++ b/arch/arm/mach-orion5x/ts78xx-setup.c
@@ -26,6 +26,9 @@
#include "mpp.h"
#include "ts78xx-fpga.h"
+#undef pr_fmt
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
/*****************************************************************************
* TS-78xx Info
****************************************************************************/
@@ -141,10 +144,13 @@ static int ts78xx_ts_rtc_load(void)
} else
rc = platform_device_add(&ts78xx_ts_rtc_device);
+ if (rc)
+ pr_info("RTC could not be registered: %d\n", rc);
return rc;
}
}
+ pr_info("RTC not found\n");
return -ENODEV;
};
@@ -319,6 +325,8 @@ static int ts78xx_ts_nand_load(void)
} else
rc = platform_device_add(&ts78xx_ts_nand_device);
+ if (rc)
+ pr_info("NAND could not be registered: %d\n", rc);
return rc;
};
@@ -363,6 +371,8 @@ static int ts78xx_ts_rng_load(void)
} else
rc = platform_device_add(&ts78xx_ts_rng_device);
+ if (rc)
+ pr_info("RNG could not be registered: %d\n", rc);
return rc;
};
@@ -402,7 +412,7 @@ static void ts78xx_fpga_supports(void)
/* enable devices if magic matches */
switch ((ts78xx_fpga.id >> 8) & 0xffffff) {
case TS7800_FPGA_MAGIC:
- pr_warning("TS-7800 FPGA: unrecognized revision 0x%.2x\n",
+ pr_warning("unrecognised FPGA revision 0x%.2x\n",
ts78xx_fpga.id & 0xff);
ts78xx_fpga.supports.ts_rtc.present = 1;
ts78xx_fpga.supports.ts_nand.present = 1;
@@ -422,26 +432,20 @@ static int ts78xx_fpga_load_devices(void)
if (ts78xx_fpga.supports.ts_rtc.present == 1) {
tmp = ts78xx_ts_rtc_load();
- if (tmp) {
- pr_info("TS-78xx: RTC not registered\n");
+ if (tmp)
ts78xx_fpga.supports.ts_rtc.present = 0;
- }
ret |= tmp;
}
if (ts78xx_fpga.supports.ts_nand.present == 1) {
tmp = ts78xx_ts_nand_load();
- if (tmp) {
- pr_info("TS-78xx: NAND not registered\n");
+ if (tmp)
ts78xx_fpga.supports.ts_nand.present = 0;
- }
ret |= tmp;
}
if (ts78xx_fpga.supports.ts_rng.present == 1) {
tmp = ts78xx_ts_rng_load();
- if (tmp) {
- pr_info("TS-78xx: RNG not registered\n");
+ if (tmp)
ts78xx_fpga.supports.ts_rng.present = 0;
- }
ret |= tmp;
}
@@ -466,7 +470,7 @@ static int ts78xx_fpga_load(void)
{
ts78xx_fpga.id = readl(TS78XX_FPGA_REGS_VIRT_BASE);
- pr_info("TS-78xx FPGA: magic=0x%.6x, rev=0x%.2x\n",
+ pr_info("FPGA magic=0x%.6x, rev=0x%.2x\n",
(ts78xx_fpga.id >> 8) & 0xffffff,
ts78xx_fpga.id & 0xff);
@@ -494,7 +498,7 @@ static int ts78xx_fpga_unload(void)
* UrJTAG SVN since r1381 can be used to reprogram the FPGA
*/
if (ts78xx_fpga.id != fpga_id) {
- pr_err("TS-78xx FPGA: magic/rev mismatch\n"
+ pr_err("FPGA magic/rev mismatch\n"
"TS-78xx FPGA: was 0x%.6x/%.2x but now 0x%.6x/%.2x\n",
(ts78xx_fpga.id >> 8) & 0xffffff, ts78xx_fpga.id & 0xff,
(fpga_id >> 8) & 0xffffff, fpga_id & 0xff);
@@ -525,7 +529,7 @@ static ssize_t ts78xx_fpga_store(struct kobject *kobj,
int value, ret;
if (ts78xx_fpga.state < 0) {
- pr_err("TS-78xx FPGA: borked, you must powercycle asap\n");
+ pr_err("FPGA borked, you must powercycle ASAP\n");
return -EBUSY;
}
@@ -533,10 +537,8 @@ static ssize_t ts78xx_fpga_store(struct kobject *kobj,
value = 1;
else if (strncmp(buf, "offline", sizeof("offline") - 1) == 0)
value = 0;
- else {
- pr_err("ts78xx_fpga_store: Invalid value\n");
+ else
return -EINVAL;
- }
if (ts78xx_fpga.state == value)
return n;
--
1.7.10
next prev parent reply other threads:[~2012-04-14 18:00 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-04-14 18:00 [PATCH 0/3] ARM: orion5x: ts78xx misc cleanups Alexander Clouter
2012-04-14 18:00 ` [PATCH 1/3] ARM: orion5x: ts78xx whitespace cleanups Alexander Clouter
2012-04-14 18:00 ` [PATCH 2/3] ARM: orion5x: ts78xx fix NAND resource off by one Alexander Clouter
2012-04-16 16:46 ` H Hartley Sweeten
2012-04-14 18:00 ` Alexander Clouter [this message]
2012-04-16 16:40 ` [PATCH 3/3] ARM: orion5x: ts78xx debugging changes H Hartley Sweeten
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1334426454-3206-4-git-send-email-alex@digriz.org.uk \
--to=alex@digriz.org.uk \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).