From mboxrd@z Thu Jan 1 00:00:00 1970 From: lee.jones@linaro.org (Lee Jones) Date: Tue, 17 Apr 2012 11:44:02 +0100 Subject: [PATCH 10/16] drivers/gpio: represent gpio-nomadik as an IRQ controller in DT documentation In-Reply-To: <1334659448-11521-1-git-send-email-lee.jones@linaro.org> References: <1334659448-11521-1-git-send-email-lee.jones@linaro.org> Message-ID: <1334659448-11521-11-git-send-email-lee.jones@linaro.org> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Now gpio-nomadik has proper bindings devices initialised by Device Tree entries are able to use the chained GPIO IRQ lines it provides. This patch aims to reflect that in the gpio-nmk documentation. Signed-off-by: Lee Jones --- .../devicetree/bindings/gpio/gpio-nmk.txt | 2 ++ 1 files changed, 2 insertions(+), 0 deletions(-) diff --git a/Documentation/devicetree/bindings/gpio/gpio-nmk.txt b/Documentation/devicetree/bindings/gpio/gpio-nmk.txt index 3856789..d0381fe 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-nmk.txt +++ b/Documentation/devicetree/bindings/gpio/gpio-nmk.txt @@ -13,6 +13,7 @@ Required properties: 4 = active high level-sensitive. 8 = active low level-sensitive. - gpio-controller : Marks the device node as a GPIO controller. +- gpio-interrupt : Marks the device node as a GPIO controller. - gpio-bank : Specifies which bank a controller owns. - st,supports-sleepmode : Specifies whether controller can sleep or not @@ -24,6 +25,7 @@ Example: interrupts = <0 120 0x4>; #gpio-cells = <2>; gpio-controller; + interrupt-controller; supports-sleepmode; gpio-bank = <1>; }; -- 1.7.9.1