From: govindraj.raja@ti.com (Govindraj.R)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 1/3] ARM: OMAP2+: omap_hwmod: Add interface to incorporate module level wakeup
Date: Fri, 20 Apr 2012 16:40:05 +0530 [thread overview]
Message-ID: <1334920207-19160-2-git-send-email-govindraj.raja@ti.com> (raw)
In-Reply-To: <1334920207-19160-1-git-send-email-govindraj.raja@ti.com>
From: "Govindraj.R" <govindraj.raja@ti.com>
On 24xx/34xx/36xx Module level wakeup events are enabled/disabled using
PM_WKEN1_CORE/PM_WKEN_PER regs. The module level wakeups are enabled by
default, by PRM soft reset default value of PM_WKEN reg is all one's which means
all module level wakeups are enabled.
However the wakeups can be enabled/disabled using sysfs entry example for uart:
echo disabled > /sys/devices/platform/omap/omap_uart.X/power/wakeup
[X=0,1,2,3]
So expand omap2 prcm structure to incorporate the PM_WKEN reg offset
and bit mask to control the module level wakeup. This info from hwmod
data can be used from hwmod framework in omap_hwmod_enable/disable_wakeup
api's to configure module level wakeups.
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Kevin Hilman <khilman@ti.com>
Cc: Benoit Cousson <b-cousson@ti.com>
Signed-off-by: Govindraj.R <govindraj.raja@ti.com>
---
arch/arm/mach-omap2/omap_hwmod_2420_data.c | 6 ++++++
arch/arm/mach-omap2/omap_hwmod_2430_data.c | 6 ++++++
arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 8 ++++++++
arch/arm/plat-omap/include/plat/omap_hwmod.h | 4 ++++
4 files changed, 24 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
index a5409ce..676274b 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
@@ -791,6 +791,8 @@ static struct omap_hwmod omap2420_uart1_hwmod = {
.module_bit = OMAP24XX_EN_UART1_SHIFT,
.idlest_reg_id = 1,
.idlest_idle_bit = OMAP24XX_EN_UART1_SHIFT,
+ .module_wakeup_offs = PM_WKEN1,
+ .module_wakeup_bit = OMAP24XX_ST_UART1_MASK,
},
},
.slaves = omap2420_uart1_slaves,
@@ -816,6 +818,8 @@ static struct omap_hwmod omap2420_uart2_hwmod = {
.module_bit = OMAP24XX_EN_UART2_SHIFT,
.idlest_reg_id = 1,
.idlest_idle_bit = OMAP24XX_EN_UART2_SHIFT,
+ .module_wakeup_offs = PM_WKEN1,
+ .module_wakeup_bit = OMAP24XX_ST_UART2_MASK,
},
},
.slaves = omap2420_uart2_slaves,
@@ -841,6 +845,8 @@ static struct omap_hwmod omap2420_uart3_hwmod = {
.module_bit = OMAP24XX_EN_UART3_SHIFT,
.idlest_reg_id = 2,
.idlest_idle_bit = OMAP24XX_EN_UART3_SHIFT,
+ .module_wakeup_offs = OMAP24XX_PM_WKEN2,
+ .module_wakeup_bit = OMAP24XX_ST_UART3_MASK,
},
},
.slaves = omap2420_uart3_slaves,
diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
index c4f56cb..94d4463 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
@@ -864,6 +864,8 @@ static struct omap_hwmod omap2430_uart1_hwmod = {
.module_bit = OMAP24XX_EN_UART1_SHIFT,
.idlest_reg_id = 1,
.idlest_idle_bit = OMAP24XX_EN_UART1_SHIFT,
+ .module_wakeup_offs = PM_WKEN1,
+ .module_wakeup_bit = OMAP24XX_ST_UART1_MASK,
},
},
.slaves = omap2430_uart1_slaves,
@@ -889,6 +891,8 @@ static struct omap_hwmod omap2430_uart2_hwmod = {
.module_bit = OMAP24XX_EN_UART2_SHIFT,
.idlest_reg_id = 1,
.idlest_idle_bit = OMAP24XX_EN_UART2_SHIFT,
+ .module_wakeup_offs = PM_WKEN1,
+ .module_wakeup_bit = OMAP24XX_ST_UART2_MASK,
},
},
.slaves = omap2430_uart2_slaves,
@@ -914,6 +918,8 @@ static struct omap_hwmod omap2430_uart3_hwmod = {
.module_bit = OMAP24XX_EN_UART3_SHIFT,
.idlest_reg_id = 2,
.idlest_idle_bit = OMAP24XX_EN_UART3_SHIFT,
+ .module_wakeup_offs = OMAP24XX_PM_WKEN2,
+ .module_wakeup_bit = OMAP24XX_ST_UART3_MASK,
},
},
.slaves = omap2430_uart3_slaves,
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index 34b9766d..9ed038d 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -1248,6 +1248,8 @@ static struct omap_hwmod omap3xxx_uart1_hwmod = {
.module_bit = OMAP3430_EN_UART1_SHIFT,
.idlest_reg_id = 1,
.idlest_idle_bit = OMAP3430_EN_UART1_SHIFT,
+ .module_wakeup_offs = PM_WKEN1,
+ .module_wakeup_bit = OMAP3430_ST_UART1_MASK,
},
},
.slaves = omap3xxx_uart1_slaves,
@@ -1273,6 +1275,8 @@ static struct omap_hwmod omap3xxx_uart2_hwmod = {
.module_bit = OMAP3430_EN_UART2_SHIFT,
.idlest_reg_id = 1,
.idlest_idle_bit = OMAP3430_EN_UART2_SHIFT,
+ .module_wakeup_offs = PM_WKEN1,
+ .module_wakeup_bit = OMAP3430_ST_UART2_MASK,
},
},
.slaves = omap3xxx_uart2_slaves,
@@ -1298,6 +1302,8 @@ static struct omap_hwmod omap3xxx_uart3_hwmod = {
.module_bit = OMAP3430_EN_UART3_SHIFT,
.idlest_reg_id = 1,
.idlest_idle_bit = OMAP3430_EN_UART3_SHIFT,
+ .module_wakeup_offs = PM_WKEN1,
+ .module_wakeup_bit = OMAP3430_ST_UART3_MASK,
},
},
.slaves = omap3xxx_uart3_slaves,
@@ -1334,6 +1340,8 @@ static struct omap_hwmod omap3xxx_uart4_hwmod = {
.module_bit = OMAP3630_EN_UART4_SHIFT,
.idlest_reg_id = 1,
.idlest_idle_bit = OMAP3630_EN_UART4_SHIFT,
+ .module_wakeup_offs = PM_WKEN1,
+ .module_wakeup_bit = OMAP3630_ST_UART4_MASK,
},
},
.slaves = omap3xxx_uart4_slaves,
diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h
index 8070145..5c7711b 100644
--- a/arch/arm/plat-omap/include/plat/omap_hwmod.h
+++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h
@@ -343,6 +343,8 @@ struct omap_hwmod_class_sysconfig {
* @idlest_reg_id: IDLEST register ID (e.g., 3 for CM_IDLEST3)
* @idlest_idle_bit: register bit shift for CM_IDLEST slave idle bit
* @idlest_stdby_bit: register bit shift for CM_IDLEST master standby bit
+ * @module_wakeup_offs: PRCM register offset for PM_WKEN
+ * @module_wakeup_bit: regiter bit mask for PM_WKEN
*
* @prcm_reg_id and @module_bit are specific to the AUTOIDLE, WKST,
* WKEN, GRPSEL registers. In an ideal world, no extra information
@@ -357,6 +359,8 @@ struct omap_hwmod_omap2_prcm {
u8 idlest_reg_id;
u8 idlest_idle_bit;
u8 idlest_stdby_bit;
+ s16 module_wakeup_offs;
+ u32 module_wakeup_bit;
};
--
1.7.9
next prev parent reply other threads:[~2012-04-20 11:10 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-04-20 11:10 [PATCH v2 0/3] ARM: omap_hwmod: add api to enable/disable module level wakeup Govindraj.R
2012-04-20 11:10 ` Govindraj.R [this message]
2012-04-23 19:22 ` [PATCH v2 1/3] ARM: OMAP2+: omap_hwmod: Add interface to incorporate " Paul Walmsley
2012-04-20 11:10 ` [PATCH v2 2/3] ARM: OMAP2+: omap_hwmod: Add api to enable/disable module level wakeup events Govindraj.R
2012-04-20 11:10 ` [PATCH v2 3/3] ARM: omap3: pm: Remove uart module level wakeup configurations Govindraj.R
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1334920207-19160-2-git-send-email-govindraj.raja@ti.com \
--to=govindraj.raja@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).