From: s.hauer@pengutronix.de (Sascha Hauer)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 23/33] ARM i.MX: Add common clock support for 2bit gate
Date: Wed, 25 Apr 2012 17:28:13 +0200 [thread overview]
Message-ID: <1335367703-19929-24-git-send-email-s.hauer@pengutronix.de> (raw)
In-Reply-To: <1335367703-19929-1-git-send-email-s.hauer@pengutronix.de>
This gate consists of two bits:
0b00: clk disabled
0b01: clk enabled in run mode and disabled in sleep mode
0b11: clk enabled
Currently only disabled and enabled are supported. As it's unlikely
that we find something like this in another SoC create a i.MX specific
clk helper for this.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/mach-imx/Makefile | 2 +-
arch/arm/mach-imx/clk-gate2.c | 115 +++++++++++++++++++++++++++++++++++++++++
arch/arm/mach-imx/clk.h | 12 +++++
3 files changed, 128 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/mach-imx/clk-gate2.c
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index 66bc6be..1b3f2ae 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -11,7 +11,7 @@ obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o clock-imx35.o ehci-imx35.o pm-i
obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clock-mx51-mx53.o ehci-imx5.o pm-imx5.o cpu_op-mx51.o
-obj-$(CONFIG_COMMON_CLK) += clk-pllv1.o clk-pllv2.o clk-pllv3.o
+obj-$(CONFIG_COMMON_CLK) += clk-pllv1.o clk-pllv2.o clk-pllv3.o clk-gate2.o
# Support for CMOS sensor interface
obj-$(CONFIG_MX1_VIDEO) += mx1-camera-fiq.o mx1-camera-fiq-ksym.o
diff --git a/arch/arm/mach-imx/clk-gate2.c b/arch/arm/mach-imx/clk-gate2.c
new file mode 100644
index 0000000..3e4713c8
--- /dev/null
+++ b/arch/arm/mach-imx/clk-gate2.c
@@ -0,0 +1,115 @@
+/*
+ * Copyright (C) 2010-2011 Canonical Ltd <jeremy.kerr@canonical.com>
+ * Copyright (C) 2011-2012 Mike Turquette, Linaro Ltd <mturquette@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Gated clock implementation
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/string.h>
+
+/**
+ * DOC: basic gatable clock which can gate and ungate it's ouput
+ *
+ * Traits of this clock:
+ * prepare - clk_(un)prepare only ensures parent is (un)prepared
+ * enable - clk_enable and clk_disable are functional & control gating
+ * rate - inherits rate from parent. No clk_set_rate support
+ * parent - fixed parent. No clk_set_parent support
+ */
+
+#define to_clk_gate(_hw) container_of(_hw, struct clk_gate, hw)
+
+static int clk_gate2_enable(struct clk_hw *hw)
+{
+ struct clk_gate *gate = to_clk_gate(hw);
+ u32 reg;
+ unsigned long flags = 0;
+
+ if (gate->lock)
+ spin_lock_irqsave(gate->lock, flags);
+
+ reg = readl(gate->reg);
+ reg |= 3 << gate->bit_idx;
+ writel(reg, gate->reg);
+
+ if (gate->lock)
+ spin_unlock_irqrestore(gate->lock, flags);
+
+ return 0;
+}
+
+static void clk_gate2_disable(struct clk_hw *hw)
+{
+ struct clk_gate *gate = to_clk_gate(hw);
+ u32 reg;
+ unsigned long flags = 0;
+
+ if (gate->lock)
+ spin_lock_irqsave(gate->lock, flags);
+
+ reg = readl(gate->reg);
+ reg &= ~(3 << gate->bit_idx);
+ writel(reg, gate->reg);
+
+ if (gate->lock)
+ spin_unlock_irqrestore(gate->lock, flags);
+}
+
+static int clk_gate2_is_enabled(struct clk_hw *hw)
+{
+ u32 reg;
+ struct clk_gate *gate = to_clk_gate(hw);
+
+ reg = readl(gate->reg);
+
+ if (((reg >> gate->bit_idx) & 3) == 3)
+ return 1;
+
+ return 0;
+}
+
+static struct clk_ops clk_gate2_ops = {
+ .enable = clk_gate2_enable,
+ .disable = clk_gate2_disable,
+ .is_enabled = clk_gate2_is_enabled,
+};
+
+struct clk *clk_register_gate2(struct device *dev, const char *name,
+ const char *parent_name, unsigned long flags,
+ void __iomem *reg, u8 bit_idx,
+ u8 clk_gate2_flags, spinlock_t *lock)
+{
+ struct clk_gate *gate;
+ struct clk *clk;
+
+ gate = kzalloc(sizeof(struct clk_gate), GFP_KERNEL);
+ if (!gate) {
+ pr_err("%s: could not allocate gated clk\n", __func__);
+ return ERR_PTR(-ENOMEM);
+ }
+
+ /* struct clk_gate assignments */
+ gate->reg = reg;
+ gate->bit_idx = bit_idx;
+ gate->flags = clk_gate2_flags;
+ gate->lock = lock;
+
+ clk = clk_register(dev, name,
+ &clk_gate2_ops, &gate->hw,
+ (parent_name ? &parent_name : NULL),
+ (parent_name ? 1 : 0),
+ flags);
+ if (IS_ERR(clk))
+ kfree(clk);
+
+ return clk;
+}
diff --git a/arch/arm/mach-imx/clk.h b/arch/arm/mach-imx/clk.h
index 331316d..5f6e435 100644
--- a/arch/arm/mach-imx/clk.h
+++ b/arch/arm/mach-imx/clk.h
@@ -24,6 +24,18 @@ struct clk *imx_clk_pllv3(enum imx_pllv3_type type, const char *name,
const char *parent_name, void __iomem *base, u32 gate_mask,
u32 div_mask);
+struct clk *clk_register_gate2(struct device *dev, const char *name,
+ const char *parent_name, unsigned long flags,
+ void __iomem *reg, u8 bit_idx,
+ u8 clk_gate_flags, spinlock_t *lock);
+
+static inline struct clk *imx_clk_gate2(const char *name, const char *parent,
+ void __iomem *reg, u8 shift)
+{
+ return clk_register_gate2(NULL, name, parent, CLK_SET_RATE_PARENT, reg,
+ shift, 0, &imx_ccm_lock);
+}
+
static inline struct clk *imx_clk_fixed(const char *name, int rate)
{
return clk_register_fixed_rate(NULL, name, NULL, CLK_IS_ROOT, rate);
--
1.7.10
next prev parent reply other threads:[~2012-04-25 15:28 UTC|newest]
Thread overview: 60+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-04-25 15:27 [PATCH v2] Convert i.MX architecture to generic clock framework Sascha Hauer
2012-04-25 15:27 ` [PATCH 01/33] dmaengine i.MX SDMA: do not depend on grouped clocks Sascha Hauer
2012-04-25 15:27 ` [PATCH 02/33] spi i.MX: " Sascha Hauer
2012-04-25 15:27 ` [PATCH 03/33] video imxfb: " Sascha Hauer
2012-04-25 15:27 ` [PATCH 04/33] net fec: " Sascha Hauer
2012-04-25 15:27 ` [PATCH 05/33] mmc mxcmmc: " Sascha Hauer
2012-04-25 15:27 ` [PATCH 06/33] mmc sdhc i.MX: " Sascha Hauer
2012-04-25 15:27 ` [PATCH 07/33] serial " Sascha Hauer
2012-04-25 15:27 ` [PATCH 08/33] mtd mxc_nand: prepare/unprepare clock Sascha Hauer
2012-04-25 15:27 ` [PATCH 09/33] USB ehci mxc: " Sascha Hauer
2012-04-25 15:28 ` [PATCH 10/33] USB ehci mxc: sanitize clock handling Sascha Hauer
2012-04-25 15:28 ` [PATCH 11/33] w1 i.MX: prepare/unprepare clock Sascha Hauer
2012-04-25 15:28 ` [PATCH 12/33] watchdog imx2: prepare clk before enabling it Sascha Hauer
2012-04-25 15:28 ` [PATCH 13/33] media mx3 camera: " Sascha Hauer
2012-04-25 15:28 ` [PATCH 14/33] dmaengine i.MX ipu: clk_prepare/unprepare clock Sascha Hauer
2012-04-25 15:28 ` [PATCH 15/33] rtc: imx dryice: Add missing clk_prepare Sascha Hauer
2012-04-25 15:28 ` [PATCH 16/33] ARM i.MX5: prepare gpc_dvfs_clk Sascha Hauer
2012-04-25 15:28 ` [PATCH 17/33] ARM i.MX timer: request correct clock Sascha Hauer
2012-04-25 15:28 ` [PATCH 18/33] ARM i.MX3: Make ccm base address a variable Sascha Hauer
2012-04-25 15:28 ` [PATCH 19/33] ARM i.MX: prepare for common clock framework Sascha Hauer
2012-04-27 6:40 ` Shawn Guo
2012-04-27 7:16 ` Sascha Hauer
2012-04-27 7:55 ` Shawn Guo
2012-04-27 8:09 ` Sascha Hauer
2012-04-25 15:28 ` [PATCH 20/33] ARM i.MX: Add common clock support for pllv1 Sascha Hauer
2012-04-25 15:28 ` [PATCH 21/33] ARM i.MX: Add common clock support for pllv2 Sascha Hauer
2012-04-25 15:28 ` [PATCH 22/33] ARM: imx: add common clock support for pllv3 Sascha Hauer
2012-04-27 6:21 ` Shawn Guo
2012-04-27 6:32 ` Sascha Hauer
2012-04-27 6:45 ` Shawn Guo
2012-04-25 15:28 ` Sascha Hauer [this message]
2012-04-25 15:28 ` [PATCH 24/33] ARM: imx: add common clock support for pfd Sascha Hauer
2012-04-25 15:28 ` [PATCH 25/33] ARM: imx: add common clock support for clk busy Sascha Hauer
2012-04-25 15:28 ` [PATCH 26/33] ARM i.MX25: implement clocks using common clock framework Sascha Hauer
2012-04-25 15:28 ` [PATCH 27/33] ARM i.MX1: " Sascha Hauer
2012-04-25 15:28 ` [PATCH 28/33] ARM i.MX21: " Sascha Hauer
2012-04-25 15:28 ` [PATCH 29/33] ARM i.MX27: " Sascha Hauer
2012-04-25 15:28 ` [PATCH 30/33] ARM i.MX31: " Sascha Hauer
2012-04-25 15:28 ` [PATCH 31/33] ARM i.MX5: " Sascha Hauer
2012-04-26 12:48 ` Heiko Stübner
2012-04-26 13:02 ` Sascha Hauer
2012-04-26 14:21 ` Heiko Stübner
2012-05-03 3:21 ` Shawn Guo
2012-05-03 6:35 ` Sascha Hauer
2012-04-25 15:28 ` [PATCH 32/33] ARM i.MX35: " Sascha Hauer
2012-04-25 15:28 ` [PATCH 33/33] ARM: i.MX6: " Sascha Hauer
2012-04-26 2:48 ` Richard Zhao
2012-04-26 6:41 ` Sascha Hauer
2012-04-26 6:57 ` Richard Zhao
2012-04-26 7:14 ` Sascha Hauer
2012-04-26 8:04 ` Sascha Hauer
2012-04-26 9:27 ` Richard Zhao
2012-04-26 7:58 ` Shawn Guo
2012-04-26 9:30 ` Richard Zhao
2012-04-26 7:42 ` Shawn Guo
2012-04-26 9:37 ` Richard Zhao
2012-04-26 14:06 ` [PATCH v2] Convert i.MX architecture to generic " Dirk Behme
2012-04-26 14:25 ` Sascha Hauer
2012-04-27 2:28 ` Shawn Guo
2012-04-27 6:32 ` Dirk Behme
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1335367703-19929-24-git-send-email-s.hauer@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).