From: s.hauer@pengutronix.de (Sascha Hauer)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 24/33] ARM: imx: add common clock support for pfd
Date: Wed, 25 Apr 2012 17:28:14 +0200 [thread overview]
Message-ID: <1335367703-19929-25-git-send-email-s.hauer@pengutronix.de> (raw)
In-Reply-To: <1335367703-19929-1-git-send-email-s.hauer@pengutronix.de>
From: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
arch/arm/mach-imx/Makefile | 3 +-
arch/arm/mach-imx/clk-pfd.c | 138 +++++++++++++++++++++++++++++++++++++++++++
arch/arm/mach-imx/clk.h | 3 +
3 files changed, 143 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/mach-imx/clk-pfd.c
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index 1b3f2ae..4d6be8d 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -11,7 +11,8 @@ obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o clock-imx35.o ehci-imx35.o pm-i
obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clock-mx51-mx53.o ehci-imx5.o pm-imx5.o cpu_op-mx51.o
-obj-$(CONFIG_COMMON_CLK) += clk-pllv1.o clk-pllv2.o clk-pllv3.o clk-gate2.o
+obj-$(CONFIG_COMMON_CLK) += clk-pllv1.o clk-pllv2.o clk-pllv3.o clk-gate2.o \
+ clk-pfd.o
# Support for CMOS sensor interface
obj-$(CONFIG_MX1_VIDEO) += mx1-camera-fiq.o mx1-camera-fiq-ksym.o
diff --git a/arch/arm/mach-imx/clk-pfd.c b/arch/arm/mach-imx/clk-pfd.c
new file mode 100644
index 0000000..d7bb6f4
--- /dev/null
+++ b/arch/arm/mach-imx/clk-pfd.c
@@ -0,0 +1,138 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2012 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include "clk.h"
+
+/**
+ * struct clk_pfd - IMX PFD clock
+ * @clk_hw: clock source
+ * @reg: PFD register address
+ * @idx: the index of PFD encoded in the register
+ *
+ * PFD clock found on i.MX6 series. Each register for PFD has 4 clk_pfd
+ * data encoded, and member idx is used to specify the one. And each
+ * register has SET, CLR and TOG registers at offset 0x4 0x8 and 0xc.
+ */
+struct clk_pfd {
+ struct clk_hw hw;
+ void __iomem *reg;
+ u8 idx;
+};
+
+#define to_clk_pfd(_hw) container_of(_hw, struct clk_pfd, hw)
+
+#define SET 0x4
+#define CLR 0x8
+#define OTG 0xc
+
+static int clk_pfd_enable(struct clk_hw *hw)
+{
+ struct clk_pfd *pfd = to_clk_pfd(hw);
+
+ writel_relaxed(1 << ((pfd->idx + 1) * 8 - 1), pfd->reg + CLR);
+
+ return 0;
+}
+
+static void clk_pfd_disable(struct clk_hw *hw)
+{
+ struct clk_pfd *pfd = to_clk_pfd(hw);
+
+ writel_relaxed(1 << ((pfd->idx + 1) * 8 - 1), pfd->reg + SET);
+}
+
+static unsigned long clk_pfd_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct clk_pfd *pfd = to_clk_pfd(hw);
+ u64 tmp = parent_rate;
+ u8 frac = (readl_relaxed(pfd->reg) >> (pfd->idx * 8)) & 0x3f;
+
+ tmp *= 18;
+ do_div(tmp, frac);
+
+ return tmp;
+}
+
+static long clk_pfd_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *prate)
+{
+ unsigned long parent_rate = __clk_get_rate(__clk_get_parent(hw->clk));
+ u64 tmp = parent_rate;
+ u8 frac;
+
+ tmp = tmp * 18 + rate / 2;
+ do_div(tmp, rate);
+ frac = tmp;
+ if (frac < 12)
+ frac = 12;
+ else if (frac > 35)
+ frac = 35;
+ tmp = parent_rate;
+ tmp *= 18;
+ do_div(tmp, frac);
+
+ return tmp;
+}
+
+static int clk_pfd_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct clk_pfd *pfd = to_clk_pfd(hw);
+ u64 tmp = parent_rate;
+ u8 frac;
+
+ tmp = tmp * 18 + rate / 2;
+ do_div(tmp, rate);
+ frac = tmp;
+ if (frac < 12)
+ frac = 12;
+ else if (frac > 35)
+ frac = 35;
+
+ writel_relaxed(0x3f << (pfd->idx * 8), pfd->reg + CLR);
+ writel_relaxed(frac << (pfd->idx * 8), pfd->reg + SET);
+
+ return 0;
+}
+
+static const struct clk_ops clk_pfd_ops = {
+ .enable = clk_pfd_enable,
+ .disable = clk_pfd_disable,
+ .recalc_rate = clk_pfd_recalc_rate,
+ .round_rate = clk_pfd_round_rate,
+ .set_rate = clk_pfd_set_rate,
+};
+
+struct clk *imx_clk_pfd(const char *name, const char *parent_name,
+ void __iomem *reg, u8 idx)
+{
+ struct clk_pfd *pfd;
+ struct clk *clk;
+
+ pfd = kzalloc(sizeof(*pfd), GFP_KERNEL);
+ if (!pfd)
+ return NULL;
+ pfd->reg = reg;
+ pfd->idx = idx;
+
+ clk = clk_register(NULL, name, &clk_pfd_ops, &pfd->hw,
+ &parent_name, 1, 0);
+ if (!clk)
+ kfree(pfd);
+
+ return clk;
+}
diff --git a/arch/arm/mach-imx/clk.h b/arch/arm/mach-imx/clk.h
index 5f6e435..5297099 100644
--- a/arch/arm/mach-imx/clk.h
+++ b/arch/arm/mach-imx/clk.h
@@ -36,6 +36,9 @@ static inline struct clk *imx_clk_gate2(const char *name, const char *parent,
shift, 0, &imx_ccm_lock);
}
+struct clk *imx_clk_pfd(const char *name, const char *parent_name,
+ void __iomem *reg, u8 idx);
+
static inline struct clk *imx_clk_fixed(const char *name, int rate)
{
return clk_register_fixed_rate(NULL, name, NULL, CLK_IS_ROOT, rate);
--
1.7.10
next prev parent reply other threads:[~2012-04-25 15:28 UTC|newest]
Thread overview: 60+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-04-25 15:27 [PATCH v2] Convert i.MX architecture to generic clock framework Sascha Hauer
2012-04-25 15:27 ` [PATCH 01/33] dmaengine i.MX SDMA: do not depend on grouped clocks Sascha Hauer
2012-04-25 15:27 ` [PATCH 02/33] spi i.MX: " Sascha Hauer
2012-04-25 15:27 ` [PATCH 03/33] video imxfb: " Sascha Hauer
2012-04-25 15:27 ` [PATCH 04/33] net fec: " Sascha Hauer
2012-04-25 15:27 ` [PATCH 05/33] mmc mxcmmc: " Sascha Hauer
2012-04-25 15:27 ` [PATCH 06/33] mmc sdhc i.MX: " Sascha Hauer
2012-04-25 15:27 ` [PATCH 07/33] serial " Sascha Hauer
2012-04-25 15:27 ` [PATCH 08/33] mtd mxc_nand: prepare/unprepare clock Sascha Hauer
2012-04-25 15:27 ` [PATCH 09/33] USB ehci mxc: " Sascha Hauer
2012-04-25 15:28 ` [PATCH 10/33] USB ehci mxc: sanitize clock handling Sascha Hauer
2012-04-25 15:28 ` [PATCH 11/33] w1 i.MX: prepare/unprepare clock Sascha Hauer
2012-04-25 15:28 ` [PATCH 12/33] watchdog imx2: prepare clk before enabling it Sascha Hauer
2012-04-25 15:28 ` [PATCH 13/33] media mx3 camera: " Sascha Hauer
2012-04-25 15:28 ` [PATCH 14/33] dmaengine i.MX ipu: clk_prepare/unprepare clock Sascha Hauer
2012-04-25 15:28 ` [PATCH 15/33] rtc: imx dryice: Add missing clk_prepare Sascha Hauer
2012-04-25 15:28 ` [PATCH 16/33] ARM i.MX5: prepare gpc_dvfs_clk Sascha Hauer
2012-04-25 15:28 ` [PATCH 17/33] ARM i.MX timer: request correct clock Sascha Hauer
2012-04-25 15:28 ` [PATCH 18/33] ARM i.MX3: Make ccm base address a variable Sascha Hauer
2012-04-25 15:28 ` [PATCH 19/33] ARM i.MX: prepare for common clock framework Sascha Hauer
2012-04-27 6:40 ` Shawn Guo
2012-04-27 7:16 ` Sascha Hauer
2012-04-27 7:55 ` Shawn Guo
2012-04-27 8:09 ` Sascha Hauer
2012-04-25 15:28 ` [PATCH 20/33] ARM i.MX: Add common clock support for pllv1 Sascha Hauer
2012-04-25 15:28 ` [PATCH 21/33] ARM i.MX: Add common clock support for pllv2 Sascha Hauer
2012-04-25 15:28 ` [PATCH 22/33] ARM: imx: add common clock support for pllv3 Sascha Hauer
2012-04-27 6:21 ` Shawn Guo
2012-04-27 6:32 ` Sascha Hauer
2012-04-27 6:45 ` Shawn Guo
2012-04-25 15:28 ` [PATCH 23/33] ARM i.MX: Add common clock support for 2bit gate Sascha Hauer
2012-04-25 15:28 ` Sascha Hauer [this message]
2012-04-25 15:28 ` [PATCH 25/33] ARM: imx: add common clock support for clk busy Sascha Hauer
2012-04-25 15:28 ` [PATCH 26/33] ARM i.MX25: implement clocks using common clock framework Sascha Hauer
2012-04-25 15:28 ` [PATCH 27/33] ARM i.MX1: " Sascha Hauer
2012-04-25 15:28 ` [PATCH 28/33] ARM i.MX21: " Sascha Hauer
2012-04-25 15:28 ` [PATCH 29/33] ARM i.MX27: " Sascha Hauer
2012-04-25 15:28 ` [PATCH 30/33] ARM i.MX31: " Sascha Hauer
2012-04-25 15:28 ` [PATCH 31/33] ARM i.MX5: " Sascha Hauer
2012-04-26 12:48 ` Heiko Stübner
2012-04-26 13:02 ` Sascha Hauer
2012-04-26 14:21 ` Heiko Stübner
2012-05-03 3:21 ` Shawn Guo
2012-05-03 6:35 ` Sascha Hauer
2012-04-25 15:28 ` [PATCH 32/33] ARM i.MX35: " Sascha Hauer
2012-04-25 15:28 ` [PATCH 33/33] ARM: i.MX6: " Sascha Hauer
2012-04-26 2:48 ` Richard Zhao
2012-04-26 6:41 ` Sascha Hauer
2012-04-26 6:57 ` Richard Zhao
2012-04-26 7:14 ` Sascha Hauer
2012-04-26 8:04 ` Sascha Hauer
2012-04-26 9:27 ` Richard Zhao
2012-04-26 7:58 ` Shawn Guo
2012-04-26 9:30 ` Richard Zhao
2012-04-26 7:42 ` Shawn Guo
2012-04-26 9:37 ` Richard Zhao
2012-04-26 14:06 ` [PATCH v2] Convert i.MX architecture to generic " Dirk Behme
2012-04-26 14:25 ` Sascha Hauer
2012-04-27 2:28 ` Shawn Guo
2012-04-27 6:32 ` Dirk Behme
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1335367703-19929-25-git-send-email-s.hauer@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).