From mboxrd@z Thu Jan 1 00:00:00 1970 From: hvaibhav@ti.com (Vaibhav Hiremath) Date: Wed, 2 May 2012 19:26:53 +0530 Subject: [PATCH-V6 2/3] ARM: OMAP2+: Replace space=>underscore in the name field of system timers In-Reply-To: <1335967014-11937-1-git-send-email-hvaibhav@ti.com> References: <1335967014-11937-1-git-send-email-hvaibhav@ti.com> Message-ID: <1335967014-11937-3-git-send-email-hvaibhav@ti.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Depending on the bootloader, passing command-line arguments with spaces may have issues. Some bootloaders doesn't seem to pass along the quotes, passing only 'gp' part of the string, which leads to wrong clocksource override configuration. So this patch changes "gp timer" => "gp_timer", for clockevent, clocksource and timer irq_handler. Signed-off-by: Vaibhav Hiremath Cc: Santosh Shilimkar Cc: Benoit Cousson Cc: Tony Lindgren Cc: Paul Walmsley Cc: Kevin Hilman --- This is new patch addition compared to original series (<=V5). arch/arm/mach-omap2/timer.c | 6 +++--- 1 files changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index ecec873..777f84b 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -90,7 +90,7 @@ static irqreturn_t omap2_gp_timer_interrupt(int irq, void *dev_id) } static struct irqaction omap2_gp_timer_irq = { - .name = "gp timer", + .name = "gp_timer", .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, .handler = omap2_gp_timer_interrupt, }; @@ -132,7 +132,7 @@ static void omap2_gp_timer_set_mode(enum clock_event_mode mode, } static struct clock_event_device clockevent_gpt = { - .name = "gp timer", + .name = "gp_timer", .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, .shift = 32, .set_next_event = omap2_gp_timer_set_next_event, @@ -269,7 +269,7 @@ static cycle_t clocksource_read_cycles(struct clocksource *cs) } static struct clocksource clocksource_gpt = { - .name = "gp timer", + .name = "gp_timer", .rating = 300, .read = clocksource_read_cycles, .mask = CLOCKSOURCE_MASK(32), -- 1.7.0.4