From: haojian.zhuang@gmail.com (Haojian Zhuang)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 8/9] ARM: dts: refresh dts file for arch mmp
Date: Fri, 4 May 2012 20:30:25 +0800 [thread overview]
Message-ID: <1336134626-12262-9-git-send-email-haojian.zhuang@gmail.com> (raw)
In-Reply-To: <1336134626-12262-1-git-send-email-haojian.zhuang@gmail.com>
Append mmp2 and pxa910 dts files. Update PXA168 dts files for irq,
timer, gpio components.
Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
---
arch/arm/boot/dts/mmp2-brownstone.dts | 38 ++++++
arch/arm/boot/dts/mmp2.dtsi | 220 +++++++++++++++++++++++++++++++++
arch/arm/boot/dts/pxa168.dtsi | 67 ++++++++---
arch/arm/boot/dts/pxa910-dkb.dts | 38 ++++++
arch/arm/boot/dts/pxa910.dtsi | 140 +++++++++++++++++++++
5 files changed, 487 insertions(+), 16 deletions(-)
create mode 100644 arch/arm/boot/dts/mmp2-brownstone.dts
create mode 100644 arch/arm/boot/dts/mmp2.dtsi
create mode 100644 arch/arm/boot/dts/pxa910-dkb.dts
create mode 100644 arch/arm/boot/dts/pxa910.dtsi
diff --git a/arch/arm/boot/dts/mmp2-brownstone.dts b/arch/arm/boot/dts/mmp2-brownstone.dts
new file mode 100644
index 0000000..153a4b2
--- /dev/null
+++ b/arch/arm/boot/dts/mmp2-brownstone.dts
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2012 Marvell Technology Group Ltd.
+ * Author: Haojian Zhuang <haojian.zhuang@marvell.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+
+/dts-v1/;
+/include/ "mmp2.dtsi"
+
+/ {
+ model = "Marvell MMP2 Aspenite Development Board";
+ compatible = "mrvl,mmp2-brownstone", "mrvl,mmp2";
+
+ chosen {
+ bootargs = "console=ttyS2,38400 root=/dev/nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on";
+ };
+
+ memory {
+ reg = <0x00000000 0x04000000>;
+ };
+
+ soc {
+ apb at d4000000 {
+ uart3: uart at d4018000 {
+ status = "okay";
+ };
+ twsi1: i2c at d4011000 {
+ status = "okay";
+ };
+ rtc: rtc at d4010000 {
+ status = "okay";
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/mmp2.dtsi b/arch/arm/boot/dts/mmp2.dtsi
new file mode 100644
index 0000000..80f74e2
--- /dev/null
+++ b/arch/arm/boot/dts/mmp2.dtsi
@@ -0,0 +1,220 @@
+/*
+ * Copyright (C) 2012 Marvell Technology Group Ltd.
+ * Author: Haojian Zhuang <haojian.zhuang@marvell.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ aliases {
+ serial0 = &uart1;
+ serial1 = &uart2;
+ serial2 = &uart3;
+ serial3 = &uart4;
+ i2c0 = &twsi1;
+ i2c1 = &twsi2;
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ interrupt-parent = <&intc>;
+ ranges;
+
+ axi at d4200000 { /* AXI */
+ compatible = "mrvl,axi-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0xd4200000 0x00200000>;
+ ranges;
+
+ intc: interrupt-controller at d4282000 {
+ compatible = "mrvl,mmp2-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0xd4282000 0x1000>;
+ mrvl,intc-nr-irqs = <64>;
+ };
+
+ intcmux4 at d4282150 {
+ compatible = "mrvl,mmp2-mux-intc";
+ interrupts = <4>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0x150 0x4>, <0x168 0x4>;
+ reg-names = "mux status", "mux mask";
+ mrvl,intc-nr-irqs = <2>;
+ };
+
+ intcmux5: interrupt-controller at d4282154 {
+ compatible = "mrvl,mmp2-mux-intc";
+ interrupts = <5>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0x154 0x4>, <0x16c 0x4>;
+ reg-names = "mux status", "mux mask";
+ mrvl,intc-nr-irqs = <2>;
+ mrvl,clr-mfp-irq = <1>;
+ };
+
+ intcmux9: interrupt-controller at d4282180 {
+ compatible = "mrvl,mmp2-mux-intc";
+ interrupts = <9>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0x180 0x4>, <0x17c 0x4>;
+ reg-names = "mux status", "mux mask";
+ mrvl,intc-nr-irqs = <3>;
+ };
+
+ intcmux17: interrupt-controller at d4282158 {
+ compatible = "mrvl,mmp2-mux-intc";
+ interrupts = <17>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0x158 0x4>, <0x170 0x4>;
+ reg-names = "mux status", "mux mask";
+ mrvl,intc-nr-irqs = <5>;
+ };
+
+ intcmux35: interrupt-controller at d428215c {
+ compatible = "mrvl,mmp2-mux-intc";
+ interrupts = <35>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0x15c 0x4>, <0x174 0x4>;
+ reg-names = "mux status", "mux mask";
+ mrvl,intc-nr-irqs = <15>;
+ };
+
+ intcmux51: interrupt-controller at d4282160 {
+ compatible = "mrvl,mmp2-mux-intc";
+ interrupts = <51>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0x160 0x4>, <0x178 0x4>;
+ reg-names = "mux status", "mux mask";
+ mrvl,intc-nr-irqs = <2>;
+ };
+
+ intcmux55: interrupt-controller at d4282188 {
+ compatible = "mrvl,mmp2-mux-intc";
+ interrupts = <55>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0x188 0x4>, <0x184 0x4>;
+ reg-names = "mux status", "mux mask";
+ mrvl,intc-nr-irqs = <2>;
+ };
+ };
+
+ apb at d4000000 { /* APB */
+ compatible = "mrvl,apb-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0xd4000000 0x00200000>;
+ ranges;
+
+ timer0: timer at d4014000 {
+ compatible = "mrvl,mmp-timer";
+ reg = <0xd4014000 0x100>;
+ interrupts = <13>;
+ };
+
+ uart1: uart at d4030000 {
+ compatible = "mrvl,mmp-uart";
+ reg = <0xd4030000 0x1000>;
+ interrupts = <27>;
+ status = "disabled";
+ };
+
+ uart2: uart at d4017000 {
+ compatible = "mrvl,mmp-uart";
+ reg = <0xd4017000 0x1000>;
+ interrupts = <28>;
+ status = "disabled";
+ };
+
+ uart3: uart at d4018000 {
+ compatible = "mrvl,mmp-uart";
+ reg = <0xd4018000 0x1000>;
+ interrupts = <24>;
+ status = "disabled";
+ };
+
+ uart4: uart at d4016000 {
+ compatible = "mrvl,mmp-uart";
+ reg = <0xd4016000 0x1000>;
+ interrupts = <46>;
+ status = "disabled";
+ };
+
+ gpio at d4019000 {
+ compatible = "mrvl,mmp-gpio";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0xd4019000 0x1000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupts = <49>;
+ interrupt-names = "gpio_mux";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ ranges;
+
+ gcb0: gpio at d4019000 {
+ reg = <0xd4019000 0x4>;
+ };
+
+ gcb1: gpio at d4019004 {
+ reg = <0xd4019004 0x4>;
+ };
+
+ gcb2: gpio at d4019008 {
+ reg = <0xd4019008 0x4>;
+ };
+
+ gcb3: gpio at d4019100 {
+ reg = <0xd4019100 0x4>;
+ };
+
+ gcb4: gpio at d4019104 {
+ reg = <0xd4019104 0x4>;
+ };
+
+ gcb5: gpio at d4019108 {
+ reg = <0xd4019108 0x4>;
+ };
+ };
+
+ twsi1: i2c at d4011000 {
+ compatible = "mrvl,mmp-twsi";
+ reg = <0xd4011000 0x1000>;
+ interrupts = <7>;
+ mrvl,i2c-fast-mode;
+ status = "disabled";
+ };
+
+ twsi2: i2c at d4025000 {
+ compatible = "mrvl,mmp-twsi";
+ reg = <0xd4025000 0x1000>;
+ interrupts = <58>;
+ status = "disabled";
+ };
+
+ rtc: rtc at d4010000 {
+ compatible = "mrvl,mmp-rtc";
+ reg = <0xd4010000 0x1000>;
+ interrupts = <1 0>;
+ interrupt-names = "rtc 1Hz", "rtc alarm";
+ interrupt-parent = <&intcmux5>;
+ status = "disabled";
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/pxa168.dtsi b/arch/arm/boot/dts/pxa168.dtsi
index d32d512..31a7186 100644
--- a/arch/arm/boot/dts/pxa168.dtsi
+++ b/arch/arm/boot/dts/pxa168.dtsi
@@ -18,13 +18,6 @@
i2c1 = &twsi2;
};
- intc: intc-interrupt-controller at d4282000 {
- compatible = "mrvl,mmp-intc", "mrvl,intc";
- interrupt-controller;
- #interrupt-cells = <1>;
- reg = <0xd4282000 0x1000>;
- };
-
soc {
#address-cells = <1>;
#size-cells = <1>;
@@ -32,6 +25,23 @@
interrupt-parent = <&intc>;
ranges;
+ axi at d4200000 { /* AXI */
+ compatible = "mrvl,axi-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0xd4200000 0x00200000>;
+ ranges;
+
+ intc: interrupt-controller at d4282000 {
+ compatible = "mrvl,mmp-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0xd4282000 0x1000>;
+ mrvl,intc-nr-irqs = <64>;
+ };
+
+ };
+
apb at d4000000 { /* APB */
compatible = "mrvl,apb-bus", "simple-bus";
#address-cells = <1>;
@@ -39,40 +49,65 @@
reg = <0xd4000000 0x00200000>;
ranges;
+ timer0: timer at d4014000 {
+ compatible = "mrvl,mmp-timer";
+ reg = <0xd4014000 0x100>;
+ interrupts = <13>;
+ };
+
uart1: uart at d4017000 {
- compatible = "mrvl,mmp-uart", "mrvl,pxa-uart";
+ compatible = "mrvl,mmp-uart";
reg = <0xd4017000 0x1000>;
interrupts = <27>;
status = "disabled";
};
uart2: uart at d4018000 {
- compatible = "mrvl,mmp-uart", "mrvl,pxa-uart";
+ compatible = "mrvl,mmp-uart";
reg = <0xd4018000 0x1000>;
interrupts = <28>;
status = "disabled";
};
uart3: uart at d4026000 {
- compatible = "mrvl,mmp-uart", "mrvl,pxa-uart";
+ compatible = "mrvl,mmp-uart";
reg = <0xd4026000 0x1000>;
interrupts = <29>;
status = "disabled";
};
- gpio: gpio at d4019000 {
- compatible = "mrvl,mmp-gpio", "mrvl,pxa-gpio";
+ gpio at d4019000 {
+ compatible = "mrvl,mmp-gpio";
+ #address-cells = <1>;
+ #size-cells = <1>;
reg = <0xd4019000 0x1000>;
+ gpio-controller;
+ #gpio-cells = <2>;
interrupts = <49>;
interrupt-names = "gpio_mux";
- gpio-controller;
- #gpio-cells = <1>;
interrupt-controller;
#interrupt-cells = <1>;
+ ranges;
+
+ gcb0: gpio at d4019000 {
+ reg = <0xd4019000 0x4>;
+ };
+
+ gcb1: gpio at d4019004 {
+ reg = <0xd4019004 0x4>;
+ };
+
+ gcb2: gpio at d4019008 {
+ reg = <0xd4019008 0x4>;
+ };
+
+ gcb3: gpio at d4019100 {
+ reg = <0xd4019100 0x4>;
+ };
};
twsi1: i2c at d4011000 {
- compatible = "mrvl,mmp-twsi", "mrvl,pxa-i2c";
+ compatible = "mrvl,mmp-twsi";
reg = <0xd4011000 0x1000>;
interrupts = <7>;
mrvl,i2c-fast-mode;
@@ -80,7 +115,7 @@
};
twsi2: i2c at d4025000 {
- compatible = "mrvl,mmp-twsi", "mrvl,pxa-i2c";
+ compatible = "mrvl,mmp-twsi";
reg = <0xd4025000 0x1000>;
interrupts = <58>;
status = "disabled";
diff --git a/arch/arm/boot/dts/pxa910-dkb.dts b/arch/arm/boot/dts/pxa910-dkb.dts
new file mode 100644
index 0000000..e92be5a
--- /dev/null
+++ b/arch/arm/boot/dts/pxa910-dkb.dts
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2012 Marvell Technology Group Ltd.
+ * Author: Haojian Zhuang <haojian.zhuang@marvell.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+
+/dts-v1/;
+/include/ "pxa910.dtsi"
+
+/ {
+ model = "Marvell PXA910 DKB Development Board";
+ compatible = "mrvl,pxa910-dkb", "mrvl,pxa910";
+
+ chosen {
+ bootargs = "console=ttyS0,115200 root=/dev/nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on";
+ };
+
+ memory {
+ reg = <0x00000000 0x10000000>;
+ };
+
+ soc {
+ apb at d4000000 {
+ uart1: uart at d4017000 {
+ status = "okay";
+ };
+ twsi1: i2c at d4011000 {
+ status = "okay";
+ };
+ rtc: rtc at d4010000 {
+ status = "okay";
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/pxa910.dtsi b/arch/arm/boot/dts/pxa910.dtsi
new file mode 100644
index 0000000..aebf32d
--- /dev/null
+++ b/arch/arm/boot/dts/pxa910.dtsi
@@ -0,0 +1,140 @@
+/*
+ * Copyright (C) 2012 Marvell Technology Group Ltd.
+ * Author: Haojian Zhuang <haojian.zhuang@marvell.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ aliases {
+ serial0 = &uart1;
+ serial1 = &uart2;
+ serial2 = &uart3;
+ i2c0 = &twsi1;
+ i2c1 = &twsi2;
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ interrupt-parent = <&intc>;
+ ranges;
+
+ axi at d4200000 { /* AXI */
+ compatible = "mrvl,axi-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0xd4200000 0x00200000>;
+ ranges;
+
+ intc: interrupt-controller at d4282000 {
+ compatible = "mrvl,mmp-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0xd4282000 0x1000>;
+ mrvl,intc-nr-irqs = <64>;
+ };
+
+ };
+
+ apb at d4000000 { /* APB */
+ compatible = "mrvl,apb-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0xd4000000 0x00200000>;
+ ranges;
+
+ timer0: timer at d4014000 {
+ compatible = "mrvl,mmp-timer";
+ reg = <0xd4014000 0x100>;
+ interrupts = <13>;
+ };
+
+ timer1: timer at d4016000 {
+ compatible = "mrvl,mmp-timer";
+ reg = <0xd4016000 0x100>;
+ interrupts = <29>;
+ status = "disabled";
+ };
+
+ uart1: uart at d4017000 {
+ compatible = "mrvl,mmp-uart";
+ reg = <0xd4017000 0x1000>;
+ interrupts = <27>;
+ status = "disabled";
+ };
+
+ uart2: uart at d4018000 {
+ compatible = "mrvl,mmp-uart";
+ reg = <0xd4018000 0x1000>;
+ interrupts = <28>;
+ status = "disabled";
+ };
+
+ uart3: uart at d4036000 {
+ compatible = "mrvl,mmp-uart";
+ reg = <0xd4036000 0x1000>;
+ interrupts = <59>;
+ status = "disabled";
+ };
+
+ gpio at d4019000 {
+ compatible = "mrvl,mmp-gpio";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0xd4019000 0x1000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupts = <49>;
+ interrupt-names = "gpio_mux";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ ranges;
+
+ gcb0: gpio at d4019000 {
+ reg = <0xd4019000 0x4>;
+ };
+
+ gcb1: gpio at d4019004 {
+ reg = <0xd4019004 0x4>;
+ };
+
+ gcb2: gpio at d4019008 {
+ reg = <0xd4019008 0x4>;
+ };
+
+ gcb3: gpio at d4019100 {
+ reg = <0xd4019100 0x4>;
+ };
+ };
+
+ twsi1: i2c at d4011000 {
+ compatible = "mrvl,mmp-twsi";
+ reg = <0xd4011000 0x1000>;
+ interrupts = <7>;
+ mrvl,i2c-fast-mode;
+ status = "disabled";
+ };
+
+ twsi2: i2c at d4037000 {
+ compatible = "mrvl,mmp-twsi";
+ reg = <0xd4037000 0x1000>;
+ interrupts = <54>;
+ status = "disabled";
+ };
+
+ rtc: rtc at d4010000 {
+ compatible = "mrvl,mmp-rtc";
+ reg = <0xd4010000 0x1000>;
+ interrupts = <5 6>;
+ interrupt-names = "rtc 1Hz", "rtc alarm";
+ status = "disabled";
+ };
+ };
+ };
+};
--
1.7.5.4
next prev parent reply other threads:[~2012-05-04 12:30 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-05-04 12:30 [PATCH v2 0/9] support dt for mmp2 Haojian Zhuang
2012-05-04 12:30 ` [PATCH v2 1/9] ARM: mmp: fix build issue on mmp with device tree Haojian Zhuang
2012-05-04 12:30 ` [PATCH v2 2/9] ARM: mmp: append CONFIG_MACH_MMP2_DT Haojian Zhuang
2012-05-04 12:30 ` [PATCH v2 3/9] ARM: mmp: support DT in irq Haojian Zhuang
2012-05-08 17:56 ` Grant Likely
2012-05-04 12:30 ` [PATCH v2 4/9] ARM: mmp: support DT in timer Haojian Zhuang
2012-05-04 12:30 ` [PATCH v2 5/9] gpio: pxa: parse gpio from DTS file Haojian Zhuang
2012-05-08 19:40 ` Grant Likely
2012-05-04 12:30 ` [PATCH v2 6/9] ARM: mmp: support mmp2 with device tree Haojian Zhuang
2012-05-04 12:30 ` [PATCH v2 7/9] ARM: mmp: support pxa910 " Haojian Zhuang
2012-05-04 12:30 ` Haojian Zhuang [this message]
2012-06-05 0:08 ` [PATCH v2 8/9] ARM: dts: refresh dts file for arch mmp Chris Ball
2012-06-05 2:03 ` Haojian Zhuang
2012-06-06 1:28 ` Arnd Bergmann
2012-06-06 1:47 ` Mitch Bradley
2012-06-06 2:35 ` Haojian Zhuang
2012-06-06 5:22 ` Mitch Bradley
2012-06-06 5:25 ` Haojian Zhuang
2012-06-06 16:22 ` Mitch Bradley
2012-06-06 3:05 ` Arnd Bergmann
2012-05-04 12:30 ` [PATCH v2 9/9] Documentation: update docs for mmp dt Haojian Zhuang
2012-05-04 14:27 ` [PATCH v2 0/9] support dt for mmp2 Arnd Bergmann
2012-05-17 23:57 ` Rob Herring
2012-05-18 2:15 ` Haojian Zhuang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1336134626-12262-9-git-send-email-haojian.zhuang@gmail.com \
--to=haojian.zhuang@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).